[PATCH 04/12] ARM: at91/dts: USB host vbus is active low

[Nicolas Ferre]

Change vbus gpio configuration in .dts files to switch to
active low configuration.

Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: stable <stable at vger.kernel.org>
---
 arch/arm/boot/dts/at91sam9g25ek.dts    |    4 ++--
 arch/arm/boot/dts/at91sam9m10g45ek.dts |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index ac0dc00..7829a4d 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -37,8 +37,8 @@
 		usb0: ohci at 00600000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 0
-					   &pioD 20 0
+			atmel,vbus-gpio = <&pioD 19 1
+					   &pioD 20 1
 					  >;
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index c4c8ae4..6abb571 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -73,8 +73,8 @@
 		usb0: ohci at 00700000 {
 			status = "okay";
 			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 0
-					   &pioD 3 0>;
+			atmel,vbus-gpio = <&pioD 1 1
+					   &pioD 3 1>;
 		};
 
 		usb1: ehci at 00800000 {
-- 
1.7.9.4