[PATCH V3 2/5] mtd: Add orion_nand devicetree bindings
Jamie Lentin
jm at lentin.co.uk
Tue Mar 27 17:54:12 EDT 2012
Allow a NAND chip using the orion_nand driver to be described using devicetree.
Acked-by: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Jamie Lentin <jm at lentin.co.uk>
---
.../devicetree/bindings/mtd/orion-nand.txt | 46 ++++++++++++++++++++
drivers/mtd/nand/orion_nand.c | 35 ++++++++++++++-
2 files changed, 79 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/orion-nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt
new file mode 100644
index 0000000..22c7438
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt
@@ -0,0 +1,46 @@
+NAND support for Marvell Orion SoC platforms
+
+Required properties:
+- compatible : "mrvl,orion-nand".
+- reg : Base physical address of the NAND and length of memory mapped
+ region
+
+Optional properties:
+- cle :
+- ale :
+- bank-width :
+- chip-delay :
+
+Examples:
+
+nand at f4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cle = <0>;
+ ale = <1>;
+ bank-width = <8>;
+ chip-delay = <25>;
+ compatible = "mrvl,orion-nand";
+ reg = <0xf4000000 0x400>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition at 100000 {
+ label = "uImage";
+ reg = <0x0100000 0x200000>;
+ };
+
+ partition at 300000 {
+ label = "dtb";
+ reg = <0x0300000 0x100000>;
+ };
+
+ partition at 400000 {
+ label = "root";
+ reg = <0x0400000 0x7d00000>;
+ };
+};
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 29f505a..3b7c82f 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -74,11 +75,13 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
static int __init orion_nand_probe(struct platform_device *pdev)
{
struct mtd_info *mtd;
+ struct mtd_part_parser_data ppdata = {};
struct nand_chip *nc;
struct orion_nand_data *board;
struct resource *res;
void __iomem *io_base;
int ret = 0;
+ u32 val = 0;
nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!nc) {
@@ -101,7 +104,26 @@ static int __init orion_nand_probe(struct platform_device *pdev)
goto no_res;
}
- board = pdev->dev.platform_data;
+ if (pdev->dev.of_node) {
+ board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data),
+ GFP_KERNEL);
+ if (!board) {
+ printk(KERN_ERR "orion_nand: failed to allocate board structure.\n");
+ ret = -ENOMEM;
+ goto no_res;
+ }
+ if (!of_property_read_u32(pdev->dev.of_node, "cle", &val))
+ board->cle = (u8)val;
+ if (!of_property_read_u32(pdev->dev.of_node, "ale", &val))
+ board->ale = (u8)val;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "bank-width", &val))
+ board->width = (u8)val;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "chip-delay", &val))
+ board->chip_delay = (u8)val;
+ } else
+ board = pdev->dev.platform_data;
mtd->priv = nc;
mtd->owner = THIS_MODULE;
@@ -129,7 +151,8 @@ static int __init orion_nand_probe(struct platform_device *pdev)
}
mtd->name = "orion_nand";
- ret = mtd_device_parse_register(mtd, NULL, 0,
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata,
board->parts, board->nr_parts);
if (ret) {
nand_release(mtd);
@@ -161,11 +184,19 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id orion_nand_of_match_table[] = {
+ { .compatible = "mrvl,orion-nand", },
+ {},
+};
+#endif
+
static struct platform_driver orion_nand_driver = {
.remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(orion_nand_of_match_table),
},
};
--
1.7.9.1
More information about the linux-arm-kernel
mailing list