[PATCH] ARM: i.MX35: Add set_rate and round_rate calls to csi_clk

[Alex Gershgorin]

Hi Sascha,

Thanks for you comments.

On Tue, Mar 20, 2012 at 12:29:52PM +0200, Alex Gershgorin wrote:
> This patch add set_rate and round_rate calls to csi_clk. This is needed
> to give mx3-camera control over master clock rate to camera.

> >The file you are patching is scheduled for removal in favour for the
> >common clock framework, so you are flogging a dead horse here. I suggest
> >that you wait some time until I finished the i.MX35 patches for this.

This patch allows me to move forward, without this patch the camera just does not work. I'll use it as a temporary patch and happily wait for you to finish your work on i.MX35 patches :-)
 
> +static int csi_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	unsigned long div;
> +	unsigned long parent_rate;
> +	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
> +
> +	if (pdr2 & (1 << 7))
> +		parent_rate = get_rate_arm();
> +	else
> +		parent_rate = get_rate_ppll();
> +
> +	div = parent_rate / rate;
> +
> +	/* Set clock divider */
> +	pdr2 |= ((div - 1) & 0x3f) << 16;

> >btw you forget to clear the divider bits in pdr2 before
> >setting the new values.

 Totally agree with you.



Regards,
Alex Gershgorin