[PATCH v8] ARM: net: JIT compiler for packet filters
Mircea Gherzan
mgherzan at gmail.com
Fri Mar 16 15:41:59 EDT 2012
Am 16.03.2012 09:17, schrieb Mircea Gherzan:
> Based of Matt Evans's PPC64 implementation.
>
> The compiler generates ARM instructions but interworking is
> supported for Thumb2 kernels.
>
> Supports both little and big endian. Unaligned loads are emitted
> for ARMv6+. Not all the BPF opcodes that deal with ancillary data
> are supported. The scratch memory of the filter lives on the stack.
> Hardware integer division is used if it is available.
>
> Enabled in the same way as for x86-64 and PPC64:
>
> echo 1 > /proc/sys/net/core/bpf_jit_enable
>
> A value greater than 1 enables opcode output.
>
> Signed-off-by: Mircea Gherzan <mgherzan at gmail.com>
> ---
>
> Changes in v8:
> * skb_copy_bits() return value check in LDX_MSH
> * immediate value as signed integer for absolute loads
>
> Changes in v7:
> * fix the intruction generation for LDX_MSH, OR_X, LSH_K,
> RSH_K and JMP_JA
> * fix the condition for saving the A register
> * use fls() instead of the compiler builtin
> * punt to the interpreter on absolute loads with K < 0
> * check for invalid data references
> * support the NEG opcode
> * clear X in the prologue based on a context flag
> * simplify the conditional jumps
>
> Changes in v6:
> * fix the code generation for the ANC_CPU opcode
>
> Changes in v5:
> * replace SEEN_LEN with SEEN_SKB
> * set ctx->seen when handling some ancillary data opcodes
>
> Changes in v4:
> * first check if the JIT compiler is enabled
> * fix the code generation for the LDX_MSH opcode
>
> Changes in v3:
> * no longer depend on EABI and !Thumb2
> * add BLX "emulation" for ARMv4 without Thumb
> * use the integer divide instruction on Cortex-A15
> * fix the handling of the DIV_K opcode
> * use a C wrapper for __aeabi_uidiv
> * fix the generation of the epilogue (non-FP case)
>
> Changes in v2:
> * enable the compiler only for ARMv5+ because of the BLX instruction
> * use the same comparison for the ARM version checks
> * use misaligned accesses on ARMv6
> * fix the SEEN_MEM
> * fix the mem_words_used()
>
> arch/arm/Kconfig | 1 +
> arch/arm/Makefile | 1 +
> arch/arm/net/Makefile | 3 +
> arch/arm/net/bpf_jit_32.c | 916 +++++++++++++++++++++++++++++++++++++++++++++
> arch/arm/net/bpf_jit_32.h | 190 ++++++++++
> 5 files changed, 1111 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/net/Makefile
> create mode 100644 arch/arm/net/bpf_jit_32.c
> create mode 100644 arch/arm/net/bpf_jit_32.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index dfb0312..ade6274 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -32,6 +32,7 @@ config ARM
> select GENERIC_IRQ_SHOW
> select CPU_PM if (SUSPEND || CPU_IDLE)
> select GENERIC_PCI_IOMAP
> + select HAVE_BPF_JIT
> help
> The ARM series is a line of low-power-consumption RISC chip designs
> licensed by ARM Ltd and targeted at embedded applications and
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 1683bfb..03b0039 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -252,6 +252,7 @@ core-$(CONFIG_VFP) += arch/arm/vfp/
>
> # If we have a machine-specific directory, then include it in the build.
> core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
> +core-y += arch/arm/net/
> core-y += $(machdirs) $(platdirs)
>
> drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
> diff --git a/arch/arm/net/Makefile b/arch/arm/net/Makefile
> new file mode 100644
> index 0000000..c2c1084
> --- /dev/null
> +++ b/arch/arm/net/Makefile
> @@ -0,0 +1,3 @@
> +# ARM-specific networking code
> +
> +obj-$(CONFIG_BPF_JIT) += bpf_jit_32.o
> diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
> new file mode 100644
> index 0000000..2ee157a
> --- /dev/null
> +++ b/arch/arm/net/bpf_jit_32.c
> @@ -0,0 +1,916 @@
> +/*
> + * Just-In-Time compiler for BPF filters on 32bit ARM
> + *
> + * Copyright (c) 2011 Mircea Gherzan <mgherzan at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2 of the License.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/compiler.h>
> +#include <linux/errno.h>
> +#include <linux/filter.h>
> +#include <linux/moduleloader.h>
> +#include <linux/netdevice.h>
> +#include <linux/string.h>
> +#include <linux/slab.h>
> +#include <asm/cacheflush.h>
> +#include <asm/hwcap.h>
> +
> +#include "bpf_jit_32.h"
> +
> +/*
> + * ABI:
> + *
> + * r0 scratch register
> + * r4 BPF register A
> + * r5 BPF register X
> + * r6 pointer to the skb
> + * r7 skb->data
> + * r8 skb_headlen(skb)
> + */
> +
> +#define r_scratch ARM_R0
> +/* r1-r3 are (also) used for the unaligned loads on the non-ARMv7 slowpath */
> +#define r_off ARM_R1
> +#define r_A ARM_R4
> +#define r_X ARM_R5
> +#define r_skb ARM_R6
> +#define r_skb_data ARM_R7
> +#define r_skb_hl ARM_R8
> +
> +#define SCRATCH_SP_OFFSET 0
> +#define SCRATCH_OFF(k) (SCRATCH_SP_OFFSET + (k))
> +
> +#define SEEN_MEM ((1 << BPF_MEMWORDS) - 1)
> +#define SEEN_MEM_WORD(k) (1 << (k))
> +#define SEEN_X (1 << BPF_MEMWORDS)
> +#define SEEN_CALL (1 << (BPF_MEMWORDS + 1))
> +#define SEEN_SKB (1 << (BPF_MEMWORDS + 2))
> +#define SEEN_DATA (1 << (BPF_MEMWORDS + 3))
> +
> +#define FLAG_NEED_X_RESET (1 << 0)
> +
> +struct jit_ctx {
> + const struct sk_filter *skf;
> + unsigned idx;
> + unsigned prologue_bytes;
> + int ret0_fp_idx;
> + u32 seen;
> + u32 flags;
> + u32 *offsets;
> + u32 *target;
> +#if __LINUX_ARM_ARCH__ < 7
> + u16 epilogue_bytes;
> + u16 imm_count;
> + u32 *imms;
> +#endif
> +};
> +
> +int bpf_jit_enable __read_mostly;
> +
> +static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
> +{
> + u8 ret;
> + int err;
> +
> + err = skb_copy_bits(skb, offset, &ret, 1);
> +
> + return (u64)err << 32 | ret;
> +}
> +
> +static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
> +{
> + u16 ret;
> + int err;
> +
> + err = skb_copy_bits(skb, offset, &ret, 2);
> +
> + return (u64)err << 32 | ntohs(ret);
> +}
> +
> +static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
> +{
> + u32 ret;
> + int err;
> +
> + err = skb_copy_bits(skb, offset, &ret, 4);
> +
> + return (u64)err << 32 | ntohl(ret);
> +}
> +
> +/*
> + * Wrapper that handles both OABI and EABI and assures Thumb2 interworking
> + * (where the assembly routines like __aeabi_uidiv could cause problems).
> + */
> +static u32 jit_udiv(u32 dividend, u32 divisor)
> +{
> + return dividend / divisor;
> +}
> +
> +static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
> +{
> + if (ctx->target != NULL)
> + ctx->target[ctx->idx] = inst | (cond << 28);
> +
> + ctx->idx++;
> +}
> +
> +/*
> + * Emit an instruction that will be executed unconditionally.
> + */
> +static inline void emit(u32 inst, struct jit_ctx *ctx)
> +{
> + _emit(ARM_COND_AL, inst, ctx);
> +}
> +
> +static u16 saved_regs(struct jit_ctx *ctx)
> +{
> + u16 ret = 0;
> +
> + if ((ctx->skf->len > 1) ||
> + (ctx->skf->insns[0].code == BPF_S_RET_A))
> + ret |= 1 << r_A;
> +
> +#ifdef CONFIG_FRAME_POINTER
> + ret |= (1 << ARM_FP) | (1 << ARM_IP) | (1 << ARM_LR) | (1 << ARM_PC);
> +#else
> + if (ctx->seen & SEEN_CALL)
> + ret |= 1 << ARM_LR;
> +#endif
> + if (ctx->seen & (SEEN_DATA | SEEN_SKB))
> + ret |= 1 << r_skb;
> + if (ctx->seen & SEEN_DATA)
> + ret |= (1 << r_skb_data) | (1 << r_skb_hl);
> + if (ctx->seen & SEEN_X)
> + ret |= 1 << r_X;
> +
> + return ret;
> +}
> +
> +static inline int mem_words_used(struct jit_ctx *ctx)
> +{
> + /* yes, we do waste some stack space IF there are "holes" in the set" */
> + return fls(ctx->seen & SEEN_MEM);
> +}
> +
> +static inline bool is_load_to_a(u16 inst)
> +{
> + switch (inst) {
> + case BPF_S_LD_W_LEN:
> + case BPF_S_LD_W_ABS:
> + case BPF_S_LD_H_ABS:
> + case BPF_S_LD_B_ABS:
> + case BPF_S_ANC_CPU:
> + case BPF_S_ANC_IFINDEX:
> + case BPF_S_ANC_MARK:
> + case BPF_S_ANC_PROTOCOL:
> + case BPF_S_ANC_RXHASH:
> + case BPF_S_ANC_QUEUE:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static void build_prologue(struct jit_ctx *ctx)
> +{
> + u16 reg_set = saved_regs(ctx);
> + u16 first_inst = ctx->skf->insns[0].code;
> + u16 off;
> +
> +#ifdef CONFIG_FRAME_POINTER
> + emit(ARM_MOV_R(ARM_IP, ARM_SP), ctx);
> + emit(ARM_PUSH(reg_set), ctx);
> + emit(ARM_SUB_I(ARM_FP, ARM_IP, 4), ctx);
> +#else
> + if (reg_set)
> + emit(ARM_PUSH(reg_set), ctx);
> +#endif
> +
> + if (ctx->seen & (SEEN_DATA | SEEN_SKB))
> + emit(ARM_MOV_R(r_skb, ARM_R0), ctx);
> +
> + if (ctx->seen & SEEN_DATA) {
> + off = offsetof(struct sk_buff, data);
> + emit(ARM_LDR_I(r_skb_data, r_skb, off), ctx);
> + /* headlen = len - data_len */
> + off = offsetof(struct sk_buff, len);
> + emit(ARM_LDR_I(r_skb_hl, r_skb, off), ctx);
> + off = offsetof(struct sk_buff, data_len);
> + emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
> + emit(ARM_SUB_R(r_skb_hl, r_skb_hl, r_scratch), ctx);
> + }
> +
> + if (ctx->flags & FLAG_NEED_X_RESET)
> + emit(ARM_MOV_I(r_X, 0), ctx);
> +
> + /* do not leak kernel data to userspace */
> + if ((first_inst != BPF_S_RET_K) && !(is_load_to_a(first_inst)))
> + emit(ARM_MOV_I(r_A, 0), ctx);
> +
> + /* stack space for the BPF_MEM words */
> + if (ctx->seen & SEEN_MEM)
> + emit(ARM_SUB_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx);
> +}
> +
> +static void build_epilogue(struct jit_ctx *ctx)
> +{
> + u16 reg_set = saved_regs(ctx);
> +
> + if (ctx->seen & SEEN_MEM)
> + emit(ARM_ADD_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx);
> +
> + reg_set &= ~(1 << ARM_LR);
> +
> +#ifdef CONFIG_FRAME_POINTER
> + /* the first instruction of the prologue was: mov ip, sp */
> + reg_set &= ~(1 << ARM_IP);
> + reg_set |= (1 << ARM_SP);
> + emit(ARM_LDM(ARM_SP, reg_set), ctx);
> +#else
> + if (reg_set) {
> + if (ctx->seen & SEEN_CALL)
> + reg_set |= 1 << ARM_PC;
> + emit(ARM_POP(reg_set), ctx);
> + }
> +
> + if (!(ctx->seen & SEEN_CALL))
> + emit(ARM_BX(ARM_LR), ctx);
> +#endif
> +}
> +
> +static int16_t imm8m(u32 x)
> +{
> + u32 rot;
> +
> + for (rot = 0; rot < 16; rot++)
> + if ((x & ~ror32(0xff, 2 * rot)) == 0)
> + return rol32(x, 2 * rot) | (rot << 8);
> +
> + return -1;
> +}
> +
> +#if __LINUX_ARM_ARCH__ < 7
> +
> +static u16 imm_offset(u32 k, struct jit_ctx *ctx)
> +{
> + unsigned i = 0, offset;
> + u16 imm;
> +
> + /* on the "fake" run we just count them (duplicates included) */
> + if (ctx->target == NULL) {
> + ctx->imm_count++;
> + return 0;
> + }
> +
> + while ((i < ctx->imm_count) && ctx->imms[i]) {
> + if (ctx->imms[i] == k)
> + break;
> + i++;
> + }
> +
> + if (ctx->imms[i] == 0)
> + ctx->imms[i] = k;
> +
> + /* constants go just after the epilogue */
> + offset = ctx->offsets[ctx->skf->len];
> + offset += ctx->prologue_bytes;
> + offset += ctx->epilogue_bytes;
> + offset += i * 4;
> +
> + ctx->target[offset / 4] = k;
> +
> + /* PC in ARM mode == address of the instruction + 8 */
> + imm = offset - (8 + ctx->idx * 4);
> +
> + return imm;
> +}
> +
> +#endif /* __LINUX_ARM_ARCH__ */
> +
> +/*
> + * Move an immediate that's not an imm8m to a core register.
> + */
> +static inline void emit_mov_i_no8m(int rd, u32 val, struct jit_ctx *ctx)
> +{
> +#if __LINUX_ARM_ARCH__ < 7
> + emit(ARM_LDR_I(rd, ARM_PC, imm_offset(val, ctx)), ctx);
> +#else
> + emit(ARM_MOVW(rd, val & 0xffff), ctx);
> + if (val > 0xffff)
> + emit(ARM_MOVT(rd, val >> 16), ctx);
> +#endif
> +}
> +
> +static inline void emit_mov_i(int rd, u32 val, struct jit_ctx *ctx)
> +{
> + int imm12 = imm8m(val);
> +
> + if (imm12 >= 0)
> + emit(ARM_MOV_I(rd, imm12), ctx);
> + else
> + emit_mov_i_no8m(rd, val, ctx);
> +}
> +
> +#if __LINUX_ARM_ARCH__ < 6
> +
> +static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
> +{
> + _emit(cond, ARM_LDRB_I(ARM_R3, r_addr, 1), ctx);
> + _emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx);
> + _emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 3), ctx);
> + _emit(cond, ARM_LSL_I(ARM_R3, ARM_R3, 16), ctx);
> + _emit(cond, ARM_LDRB_I(ARM_R0, r_addr, 2), ctx);
> + _emit(cond, ARM_ORR_S(ARM_R3, ARM_R3, ARM_R1, SRTYPE_LSL, 24), ctx);
> + _emit(cond, ARM_ORR_R(ARM_R3, ARM_R3, ARM_R2), ctx);
> + _emit(cond, ARM_ORR_S(r_res, ARM_R3, ARM_R0, SRTYPE_LSL, 8), ctx);
> +}
> +
> +static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
> +{
> + _emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx);
> + _emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 1), ctx);
> + _emit(cond, ARM_ORR_S(r_res, ARM_R2, ARM_R1, SRTYPE_LSL, 8), ctx);
> +}
> +
> +static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx)
> +{
> + emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx);
> + emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx);
> + emit(ARM_LSL_I(r_dst, r_dst, 8), ctx);
> + emit(ARM_LSL_R(r_dst, r_dst, 8), ctx);
> +}
> +
> +#else /* ARMv6+ */
> +
> +static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
> +{
> + _emit(cond, ARM_LDR_I(r_res, r_addr, 0), ctx);
> +#ifdef __LITTLE_ENDIAN
> + _emit(cond, ARM_REV(r_res, r_res), ctx);
> +#endif
> +}
> +
> +static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
> +{
> + _emit(cond, ARM_LDRH_I(r_res, r_addr, 0), ctx);
> +#ifdef __LITTLE_ENDIAN
> + _emit(cond, ARM_REV16(r_res, r_res), ctx);
> +#endif
> +}
> +
> +static inline void emit_swap16(u8 r_dst __maybe_unused,
> + u8 r_src __maybe_unused,
> + struct jit_ctx *ctx __maybe_unused)
> +{
> +#ifdef __LITTLE_ENDIAN
> + emit(ARM_REV16(r_dst, r_src), ctx);
> +#endif
> +}
> +
> +#endif /* __LINUX_ARM_ARCH__ < 6 */
> +
> +
> +/* Compute the immediate value for a PC-relative branch. */
> +static inline u32 b_imm(unsigned tgt, struct jit_ctx *ctx)
> +{
> + u32 imm;
> +
> + if (ctx->target == NULL)
> + return 0;
> + /*
> + * BPF allows only forward jumps and the offset of the target is
> + * still the one computed during the first pass.
> + */
> + imm = ctx->offsets[tgt] + ctx->prologue_bytes - (ctx->idx * 4 + 8);
> +
> + return imm >> 2;
> +}
> +
> +#define OP_IMM3(op, r1, r2, imm_val, ctx) \
> + do { \
> + imm12 = imm8m(imm_val); \
> + if (imm12 < 0) { \
> + emit_mov_i_no8m(r_scratch, imm_val, ctx); \
> + emit(op ## _R((r1), (r2), r_scratch), ctx); \
> + } else { \
> + emit(op ## _I((r1), (r2), imm12), ctx); \
> + } \
> + } while (0)
> +
> +static inline void emit_err_ret(u8 cond, struct jit_ctx *ctx)
> +{
> + if (ctx->ret0_fp_idx >= 0) {
> + _emit(cond, ARM_B(b_imm(ctx->ret0_fp_idx, ctx)), ctx);
> + /* NOP to keep the size constant between passes */
> + emit(ARM_MOV_R(ARM_R0, ARM_R0), ctx);
> + } else {
> + _emit(cond, ARM_MOV_I(ARM_R0, 0), ctx);
> + _emit(cond, ARM_B(b_imm(ctx->skf->len, ctx)), ctx);
> + }
> +}
> +
> +static inline void emit_blx_r(u8 tgt_reg, struct jit_ctx *ctx)
> +{
> +#if __LINUX_ARM_ARCH__ < 5
> + emit(ARM_MOV_R(ARM_LR, ARM_PC), ctx);
> +
> + if (elf_hwcap & HWCAP_THUMB)
> + emit(ARM_BX(tgt_reg), ctx);
> + else
> + emit(ARM_MOV_R(ARM_PC, tgt_reg), ctx);
> +#else
> + emit(ARM_BLX_R(tgt_reg), ctx);
> +#endif
> +}
> +
> +static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
> +{
> +#if __LINUX_ARM_ARCH__ == 7
> + if (elf_hwcap & HWCAP_IDIVA) {
> + emit(ARM_UDIV(rd, rm, rn), ctx);
> + return;
> + }
> +#endif
> + if (rm != ARM_R0)
> + emit(ARM_MOV_R(ARM_R0, rm), ctx);
> + if (rn != ARM_R1)
> + emit(ARM_MOV_R(ARM_R1, rn), ctx);
> +
> + ctx->seen |= SEEN_CALL;
> + emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
> + emit_blx_r(ARM_R3, ctx);
> +
> + if (rd != ARM_R0)
> + emit(ARM_MOV_R(rd, ARM_R0), ctx);
> +}
> +
> +static inline void update_on_xread(struct jit_ctx *ctx)
> +{
> + if (!(ctx->seen & SEEN_X))
> + ctx->flags |= FLAG_NEED_X_RESET;
> +
> + ctx->seen |= SEEN_X;
> +}
> +
> +static int build_body(struct jit_ctx *ctx)
> +{
> + void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w};
> + const struct sk_filter *prog = ctx->skf;
> + const struct sock_filter *inst;
> + unsigned i, load_order, off, condt;
> + int imm12;
> + u32 k;
> +
> + for (i = 0; i < prog->len; i++) {
> + inst = &(prog->insns[i]);
> + /* K as an immediate value operand */
> + k = inst->k;
> +
> + /* compute offsets only in the fake pass */
> + if (ctx->target == NULL)
> + ctx->offsets[i] = ctx->idx * 4;
> +
> + switch (inst->code) {
> + case BPF_S_LD_IMM:
> + emit_mov_i(r_A, k, ctx);
> + break;
> + case BPF_S_LD_W_LEN:
> + ctx->seen |= SEEN_SKB;
> + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
> + emit(ARM_LDR_I(r_A, r_skb,
> + offsetof(struct sk_buff, len)), ctx);
> + break;
> + case BPF_S_LD_MEM:
> + /* A = scratch[k] */
> + ctx->seen |= SEEN_MEM_WORD(k);
> + emit(ARM_LDR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx);
> + break;
> + case BPF_S_LD_W_ABS:
> + load_order = 2;
> + goto load;
> + case BPF_S_LD_H_ABS:
> + load_order = 1;
> + goto load;
> + case BPF_S_LD_B_ABS:
> + load_order = 0;
> +load:
> + /* the interpreter will deal with the negative K */
> + if ((int)k < 0)
> + return -ENOTSUPP;
> + emit_mov_i(r_off, k, ctx);
> +load_common:
> + ctx->seen |= SEEN_DATA | SEEN_CALL;
> +
> + if (load_order > 0) {
> + emit(ARM_SUB_I(r_scratch, r_skb_hl,
> + 1 << load_order), ctx);
> + emit(ARM_CMP_R(r_scratch, r_off), ctx);
> + condt = ARM_COND_HS;
> + } else {
> + emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
> + condt = ARM_COND_HI;
> + }
> +
> + _emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data),
> + ctx);
> +
> + if (load_order == 0)
> + _emit(condt, ARM_LDRB_I(r_A, r_scratch, 0),
> + ctx);
> + else if (load_order == 1)
> + emit_load_be16(condt, r_A, r_scratch, ctx);
> + else if (load_order == 2)
> + emit_load_be32(condt, r_A, r_scratch, ctx);
> +
> + _emit(condt, ARM_B(b_imm(i + 1, ctx)), ctx);
> +
> + /* the slowpath */
> + emit_mov_i(ARM_R3, (u32)load_func[load_order], ctx);
> + emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
> + /* the offset is already in R1 */
> + emit_blx_r(ARM_R3, ctx);
> + /* check the result of skb_copy_bits */
> + emit(ARM_CMP_I(ARM_R1, 0), ctx);
> + emit_err_ret(ARM_COND_NE, ctx);
> + emit(ARM_MOV_R(r_A, ARM_R0), ctx);
> + break;
> + case BPF_S_LD_W_IND:
> + load_order = 2;
> + goto load_ind;
> + case BPF_S_LD_H_IND:
> + load_order = 1;
> + goto load_ind;
> + case BPF_S_LD_B_IND:
> + load_order = 0;
> +load_ind:
> + OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
> + goto load_common;
> + case BPF_S_LDX_IMM:
> + ctx->seen |= SEEN_X;
> + emit_mov_i(r_X, k, ctx);
> + break;
> + case BPF_S_LDX_W_LEN:
> + ctx->seen |= SEEN_X | SEEN_SKB;
> + emit(ARM_LDR_I(r_X, r_skb,
> + offsetof(struct sk_buff, len)), ctx);
> + break;
> + case BPF_S_LDX_MEM:
> + ctx->seen |= SEEN_X | SEEN_MEM_WORD(k);
> + emit(ARM_LDR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx);
> + break;
> + case BPF_S_LDX_B_MSH:
> + /* x = ((*(frame + k)) & 0xf) << 2; */
> + ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
> + /* the interpreter should deal with the negative K */
> + if (k < 0)
> + return -1;
> + /* offset in r1: we might have to take the slow path */
> + emit_mov_i(r_off, k, ctx);
> + emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
> +
> + /* load in r0: common with the slowpath */
> + _emit(ARM_COND_HI, ARM_LDRB_R(ARM_R0, r_skb_data,
> + ARM_R1), ctx);
> + /*
> + * emit_mov_i() might generate one or two instructions,
> + * the same holds for emit_blx_r()
> + */
> + _emit(ARM_COND_HI, ARM_B(b_imm(i + 1, ctx) - 2), ctx);
> +
> + emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
> + /* r_off is r1 */
> + emit_mov_i(ARM_R3, (u32)jit_get_skb_b, ctx);
> + emit_blx_r(ARM_R3, ctx);
> + /* check the return value of skb_copy_bits */
> + emit(ARM_CMP_I(ARM_R1, 0), ctx);
> + emit_err_ret(ARM_COND_NE, ctx);
> +
> + emit(ARM_AND_I(r_X, ARM_R0, 0x00f), ctx);
> + emit(ARM_LSL_I(r_X, r_X, 2), ctx);
> + break;
> + case BPF_S_ST:
> + ctx->seen |= SEEN_MEM_WORD(k);
> + emit(ARM_STR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx);
> + break;
> + case BPF_S_STX:
> + update_on_xread(ctx);
> + ctx->seen |= SEEN_MEM_WORD(k);
> + emit(ARM_STR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx);
> + break;
> + case BPF_S_ALU_ADD_K:
> + /* A += K */
> + OP_IMM3(ARM_ADD, r_A, r_A, k, ctx);
> + break;
> + case BPF_S_ALU_ADD_X:
> + update_on_xread(ctx);
> + emit(ARM_ADD_R(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_SUB_K:
> + /* A -= K */
> + OP_IMM3(ARM_SUB, r_A, r_A, k, ctx);
> + break;
> + case BPF_S_ALU_SUB_X:
> + update_on_xread(ctx);
> + emit(ARM_SUB_R(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_MUL_K:
> + /* A *= K */
> + emit_mov_i(r_scratch, k, ctx);
> + emit(ARM_MUL(r_A, r_A, r_scratch), ctx);
> + break;
> + case BPF_S_ALU_MUL_X:
> + update_on_xread(ctx);
> + emit(ARM_MUL(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_DIV_K:
> + /* current k == reciprocal_value(userspace k) */
> + emit_mov_i(r_scratch, k, ctx);
> + /* A = top 32 bits of the product */
> + emit(ARM_UMULL(r_scratch, r_A, r_A, r_scratch), ctx);
> + break;
> + case BPF_S_ALU_DIV_X:
> + update_on_xread(ctx);
> + emit(ARM_CMP_I(r_X, 0), ctx);
> + emit_err_ret(ARM_COND_EQ, ctx);
> + emit_udiv(r_A, r_A, r_X, ctx);
> + break;
> + case BPF_S_ALU_OR_K:
> + /* A |= K */
> + OP_IMM3(ARM_ORR, r_A, r_A, k, ctx);
> + break;
> + case BPF_S_ALU_OR_X:
> + update_on_xread(ctx);
> + emit(ARM_ORR_R(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_AND_K:
> + /* A &= K */
> + OP_IMM3(ARM_AND, r_A, r_A, k, ctx);
> + break;
> + case BPF_S_ALU_AND_X:
> + update_on_xread(ctx);
> + emit(ARM_AND_R(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_LSH_K:
> + if (unlikely(k > 31))
> + return -1;
> + emit(ARM_LSL_I(r_A, r_A, k), ctx);
> + break;
> + case BPF_S_ALU_LSH_X:
> + update_on_xread(ctx);
> + emit(ARM_LSL_R(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_RSH_K:
> + if (unlikely(k > 31))
> + return -1;
> + emit(ARM_LSR_I(r_A, r_A, k), ctx);
> + break;
> + case BPF_S_ALU_RSH_X:
> + update_on_xread(ctx);
> + emit(ARM_LSR_R(r_A, r_A, r_X), ctx);
> + break;
> + case BPF_S_ALU_NEG:
> + /* A = -A */
> + emit(ARM_RSB_I(r_A, r_A, 0), ctx);
> + break;
> + case BPF_S_JMP_JA:
> + /* pc += K */
> + emit(ARM_B(b_imm(i + k + 1, ctx)), ctx);
> + break;
> + case BPF_S_JMP_JEQ_K:
> + /* pc += (A == K) ? pc->jt : pc->jf */
> + condt = ARM_COND_EQ;
> + goto cmp_imm;
> + case BPF_S_JMP_JGT_K:
> + /* pc += (A > K) ? pc->jt : pc->jf */
> + condt = ARM_COND_HI;
> + goto cmp_imm;
> + case BPF_S_JMP_JGE_K:
> + /* pc += (A >= K) ? pc->jt : pc->jf */
> + condt = ARM_COND_HS;
> +cmp_imm:
> + imm12 = imm8m(k);
> + if (imm12 < 0) {
> + emit_mov_i_no8m(r_scratch, k, ctx);
> + emit(ARM_CMP_R(r_A, r_scratch), ctx);
> + } else {
> + emit(ARM_CMP_I(r_A, imm12), ctx);
> + }
> +cond_jump:
> + if (inst->jt)
> + _emit(condt, ARM_B(b_imm(i + inst->jt + 1,
> + ctx)), ctx);
> + if (inst->jf)
> + _emit(condt ^ 1, ARM_B(b_imm(i + inst->jf + 1,
> + ctx)), ctx);
> + break;
> + case BPF_S_JMP_JEQ_X:
> + /* pc += (A == X) ? pc->jt : pc->jf */
> + condt = ARM_COND_EQ;
> + goto cmp_x;
> + case BPF_S_JMP_JGT_X:
> + /* pc += (A > X) ? pc->jt : pc->jf */
> + condt = ARM_COND_HI;
> + goto cmp_x;
> + case BPF_S_JMP_JGE_X:
> + /* pc += (A >= X) ? pc->jt : pc->jf */
> + condt = ARM_COND_CS;
> +cmp_x:
> + update_on_xread(ctx);
> + emit(ARM_CMP_R(r_A, r_X), ctx);
> + goto cond_jump;
> + case BPF_S_JMP_JSET_K:
> + /* pc += (A & K) ? pc->jt : pc->jf */
> + condt = ARM_COND_NE;
> + /* not set iff all zeroes iff Z==1 iff EQ */
> +
> + imm12 = imm8m(k);
> + if (imm12 < 0) {
> + emit_mov_i_no8m(r_scratch, k, ctx);
> + emit(ARM_TST_R(r_A, r_scratch), ctx);
> + } else {
> + emit(ARM_TST_I(r_A, imm12), ctx);
> + }
> + goto cond_jump;
> + case BPF_S_JMP_JSET_X:
> + /* pc += (A & X) ? pc->jt : pc->jf */
> + update_on_xread(ctx);
> + condt = ARM_COND_NE;
> + emit(ARM_TST_R(r_A, r_X), ctx);
> + goto cond_jump;
> + case BPF_S_RET_A:
> + emit(ARM_MOV_R(ARM_R0, r_A), ctx);
> + goto b_epilogue;
> + case BPF_S_RET_K:
> + if ((k == 0) && (ctx->ret0_fp_idx < 0))
> + ctx->ret0_fp_idx = i;
> + emit_mov_i(ARM_R0, k, ctx);
> +b_epilogue:
> + if (i != ctx->skf->len - 1)
> + emit(ARM_B(b_imm(prog->len, ctx)), ctx);
> + break;
> + case BPF_S_MISC_TAX:
> + /* X = A */
> + ctx->seen |= SEEN_X;
> + emit(ARM_MOV_R(r_X, r_A), ctx);
> + break;
> + case BPF_S_MISC_TXA:
> + /* A = X */
> + update_on_xread(ctx);
> + emit(ARM_MOV_R(r_A, r_X), ctx);
> + break;
> + case BPF_S_ANC_PROTOCOL:
> + /* A = ntohs(skb->protocol) */
> + ctx->seen |= SEEN_SKB;
> + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
> + protocol) != 2);
> + off = offsetof(struct sk_buff, protocol);
> + emit(ARM_LDRH_I(r_scratch, r_skb, off), ctx);
> + emit_swap16(r_A, r_scratch, ctx);
> + break;
> + case BPF_S_ANC_CPU:
> + /* r_scratch = current_thread_info() */
> + OP_IMM3(ARM_BIC, r_scratch, ARM_SP, THREAD_SIZE - 1, ctx);
> + /* A = current_thread_info()->cpu */
> + BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);
> + off = offsetof(struct thread_info, cpu);
> + emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
> + break;
> + case BPF_S_ANC_IFINDEX:
> + /* A = skb->dev->ifindex */
> + ctx->seen |= SEEN_SKB;
> + off = offsetof(struct sk_buff, dev);
> + emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
> +
> + emit(ARM_CMP_I(r_scratch, 0), ctx);
> + emit_err_ret(ARM_COND_EQ, ctx);
> +
> + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
> + ifindex) != 4);
> + off = offsetof(struct net_device, ifindex);
> + emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
> + break;
> + case BPF_S_ANC_MARK:
> + ctx->seen |= SEEN_SKB;
> + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
> + off = offsetof(struct sk_buff, mark);
> + emit(ARM_LDR_I(r_A, r_skb, off), ctx);
> + break;
> + case BPF_S_ANC_RXHASH:
> + ctx->seen |= SEEN_SKB;
> + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
> + off = offsetof(struct sk_buff, rxhash);
> + emit(ARM_LDR_I(r_A, r_skb, off), ctx);
> + break;
> + case BPF_S_ANC_QUEUE:
> + ctx->seen |= SEEN_SKB;
> + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
> + queue_mapping) != 2);
> + BUILD_BUG_ON(offsetof(struct sk_buff,
> + queue_mapping) > 0xff);
> + off = offsetof(struct sk_buff, queue_mapping);
> + emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
> + break;
> + default:
> + return -1;
> + }
> + }
> +
> + /* compute offsets only during the first pass */
> + if (ctx->target == NULL)
> + ctx->offsets[i] = ctx->idx * 4;
> +
> + return 0;
> +}
> +
> +
> +void bpf_jit_compile(struct sk_filter *fp)
> +{
> + struct jit_ctx ctx;
> + unsigned tmp_idx;
> + unsigned alloc_size;
> +
> + if (!bpf_jit_enable)
> + return;
> +
> + memset(&ctx, 0, sizeof(ctx));
> + ctx.skf = fp;
> + ctx.ret0_fp_idx = -1;
> +
> + ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1));
> + if (ctx.offsets == NULL)
> + return;
> +
> + /* fake pass to fill in the ctx->seen */
> + if (unlikely(build_body(&ctx)))
> + goto out;
> +
> + tmp_idx = ctx.idx;
> + build_prologue(&ctx);
> + ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
> +
> +#if __LINUX_ARM_ARCH__ < 7
> + tmp_idx = ctx.idx;
> + build_epilogue(&ctx);
> + ctx.epilogue_bytes = (ctx.idx - tmp_idx) * 4;
> +
> + ctx.idx += ctx.imm_count;
> + if (ctx.imm_count) {
> + ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count);
> + if (ctx.imms == NULL)
> + goto out;
> + }
> +#else
> + /* there's nothing after the epilogue on ARMv7 */
> + build_epilogue(&ctx);
> +#endif
> +
> + alloc_size = 4 * ctx.idx;
> + ctx.target = module_alloc(max(sizeof(struct work_struct),
> + alloc_size));
> + if (unlikely(ctx.target == NULL))
> + goto out;
> +
> + ctx.idx = 0;
> + build_prologue(&ctx);
> + build_body(&ctx);
> + build_epilogue(&ctx);
> +
> + flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
> +
> +#if __LINUX_ARM_ARCH__ < 7
> + if (ctx.imm_count)
> + kfree(ctx.imms);
> +#endif
> +
> + if (bpf_jit_enable > 1)
> + print_hex_dump(KERN_INFO, "BPF JIT code: ",
> + DUMP_PREFIX_ADDRESS, 16, 4, ctx.target,
> + alloc_size, false);
> +
> + fp->bpf_func = (void *)ctx.target;
> +out:
> + kfree(ctx.offsets);
> + return;
> +}
> +
> +static void bpf_jit_free_worker(struct work_struct *work)
> +{
> + module_free(NULL, work);
> +}
> +
> +void bpf_jit_free(struct sk_filter *fp)
> +{
> + struct work_struct *work;
> +
> + if (fp->bpf_func != sk_run_filter) {
> + work = (struct work_struct *)fp->bpf_func;
> +
> + INIT_WORK(work, bpf_jit_free_worker);
> + schedule_work(work);
> + }
> +}
> +
> diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
> new file mode 100644
> index 0000000..99ae5e3
> --- /dev/null
> +++ b/arch/arm/net/bpf_jit_32.h
> @@ -0,0 +1,190 @@
> +/*
> + * Just-In-Time compiler for BPF filters on 32bit ARM
> + *
> + * Copyright (c) 2011 Mircea Gherzan <mgherzan at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2 of the License.
> + */
> +
> +#ifndef PFILTER_OPCODES_ARM_H
> +#define PFILTER_OPCODES_ARM_H
> +
> +#define ARM_R0 0
> +#define ARM_R1 1
> +#define ARM_R2 2
> +#define ARM_R3 3
> +#define ARM_R4 4
> +#define ARM_R5 5
> +#define ARM_R6 6
> +#define ARM_R7 7
> +#define ARM_R8 8
> +#define ARM_R9 9
> +#define ARM_R10 10
> +#define ARM_FP 11
> +#define ARM_IP 12
> +#define ARM_SP 13
> +#define ARM_LR 14
> +#define ARM_PC 15
> +
> +#define ARM_COND_EQ 0x0
> +#define ARM_COND_NE 0x1
> +#define ARM_COND_CS 0x2
> +#define ARM_COND_HS ARM_COND_CS
> +#define ARM_COND_CC 0x3
> +#define ARM_COND_LO ARM_COND_CC
> +#define ARM_COND_MI 0x4
> +#define ARM_COND_PL 0x5
> +#define ARM_COND_VS 0x6
> +#define ARM_COND_VC 0x7
> +#define ARM_COND_HI 0x8
> +#define ARM_COND_LS 0x9
> +#define ARM_COND_GE 0xa
> +#define ARM_COND_LT 0xb
> +#define ARM_COND_GT 0xc
> +#define ARM_COND_LE 0xd
> +#define ARM_COND_AL 0xe
> +
> +/* register shift types */
> +#define SRTYPE_LSL 0
> +#define SRTYPE_LSR 1
> +#define SRTYPE_ASR 2
> +#define SRTYPE_ROR 3
> +
> +#define ARM_INST_ADD_R 0x00800000
> +#define ARM_INST_ADD_I 0x02800000
> +
> +#define ARM_INST_AND_R 0x00000000
> +#define ARM_INST_AND_I 0x02000000
> +
> +#define ARM_INST_BIC_R 0x01c00000
> +#define ARM_INST_BIC_I 0x03c00000
> +
> +#define ARM_INST_B 0x0a000000
> +#define ARM_INST_BX 0x012FFF10
> +#define ARM_INST_BLX_R 0x012fff30
> +
> +#define ARM_INST_CMP_R 0x01500000
> +#define ARM_INST_CMP_I 0x03500000
> +
> +#define ARM_INST_LDRB_I 0x05d00000
> +#define ARM_INST_LDRB_R 0x07d00000
> +#define ARM_INST_LDRH_I 0x01d000b0
> +#define ARM_INST_LDR_I 0x05900000
> +
> +#define ARM_INST_LDM 0x08900000
> +
> +#define ARM_INST_LSL_I 0x01a00000
> +#define ARM_INST_LSL_R 0x01a00010
> +
> +#define ARM_INST_LSR_I 0x01a00020
> +#define ARM_INST_LSR_R 0x01a00030
> +
> +#define ARM_INST_MOV_R 0x01a00000
> +#define ARM_INST_MOV_I 0x03a00000
> +#define ARM_INST_MOVW 0x03000000
> +#define ARM_INST_MOVT 0x03400000
> +
> +#define ARM_INST_MUL 0x00000090
> +
> +#define ARM_INST_POP 0x08bd0000
> +#define ARM_INST_PUSH 0x092d0000
> +
> +#define ARM_INST_ORR_R 0x01800000
> +#define ARM_INST_ORR_I 0x03800000
> +
> +#define ARM_INST_REV 0x06bf0f30
> +#define ARM_INST_REV16 0x06bf0fb0
> +
> +#define ARM_INST_RSB_I 0x02600000
> +
> +#define ARM_INST_SUB_R 0x00400000
> +#define ARM_INST_SUB_I 0x02400000
> +
> +#define ARM_INST_STR_I 0x05800000
> +
> +#define ARM_INST_TST_R 0x01100000
> +#define ARM_INST_TST_I 0x03100000
> +
> +#define ARM_INST_UDIV 0x0730f010
> +
> +#define ARM_INST_UMULL 0x00800090
> +
> +/* register */
> +#define _AL3_R(op, rd, rn, rm) ((op ## _R) | (rd) << 12 | (rn) << 16 | (rm))
> +/* immediate */
> +#define _AL3_I(op, rd, rn, imm) ((op ## _I) | (rd) << 12 | (rn) << 16 | (imm))
> +
> +#define ARM_ADD_R(rd, rn, rm) _AL3_R(ARM_INST_ADD, rd, rn, rm)
> +#define ARM_ADD_I(rd, rn, imm) _AL3_I(ARM_INST_ADD, rd, rn, imm)
> +
> +#define ARM_AND_R(rd, rn, rm) _AL3_R(ARM_INST_AND, rd, rn, rm)
> +#define ARM_AND_I(rd, rn, imm) _AL3_I(ARM_INST_AND, rd, rn, imm)
> +
> +#define ARM_BIC_R(rd, rn, rm) _AL3_R(ARM_INST_BIC, rd, rn, rm)
> +#define ARM_BIC_I(rd, rn, imm) _AL3_I(ARM_INST_BIC, rd, rn, imm)
> +
> +#define ARM_B(imm24) (ARM_INST_B | ((imm24) & 0xffffff))
> +#define ARM_BX(rm) (ARM_INST_BX | (rm))
> +#define ARM_BLX_R(rm) (ARM_INST_BLX_R | (rm))
> +
> +#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
> +#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
> +
> +#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
> + | (off))
> +#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
> + | (off))
> +#define ARM_LDRB_R(rt, rn, rm) (ARM_INST_LDRB_R | (rt) << 12 | (rn) << 16 \
> + | (rm))
> +#define ARM_LDRH_I(rt, rn, off) (ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \
> + | (((off) & 0xf0) << 4) | ((off) & 0xf))
> +
> +#define ARM_LDM(rn, regs) (ARM_INST_LDM | (rn) << 16 | (regs))
> +
> +#define ARM_LSL_R(rd, rn, rm) (_AL3_R(ARM_INST_LSL, rd, 0, rn) | (rm) << 8)
> +#define ARM_LSL_I(rd, rn, imm) (_AL3_I(ARM_INST_LSL, rd, 0, rn) | (imm) << 7)
> +
> +#define ARM_LSR_R(rd, rn, rm) (_AL3_R(ARM_INST_LSR, rd, 0, rn) | (rm) << 8)
> +#define ARM_LSR_I(rd, rn, imm) (_AL3_I(ARM_INST_LSR, rd, 0, rn) | (imm) << 7)
> +
> +#define ARM_MOV_R(rd, rm) _AL3_R(ARM_INST_MOV, rd, 0, rm)
> +#define ARM_MOV_I(rd, imm) _AL3_I(ARM_INST_MOV, rd, 0, imm)
> +
> +#define ARM_MOVW(rd, imm) \
> + (ARM_INST_MOVW | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff))
> +
> +#define ARM_MOVT(rd, imm) \
> + (ARM_INST_MOVT | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff))
> +
> +#define ARM_MUL(rd, rm, rn) (ARM_INST_MUL | (rd) << 16 | (rm) << 8 | (rn))
> +
> +#define ARM_POP(regs) (ARM_INST_POP | (regs))
> +#define ARM_PUSH(regs) (ARM_INST_PUSH | (regs))
> +
> +#define ARM_ORR_R(rd, rn, rm) _AL3_R(ARM_INST_ORR, rd, rn, rm)
> +#define ARM_ORR_I(rd, rn, imm) _AL3_I(ARM_INST_ORR, rd, rn, imm)
> +#define ARM_ORR_S(rd, rn, rm, type, rs) \
> + (ARM_ORR_R(rd, rn, rm) | (type) << 5 | (rs) << 7)
> +
> +#define ARM_REV(rd, rm) (ARM_INST_REV | (rd) << 12 | (rm))
> +#define ARM_REV16(rd, rm) (ARM_INST_REV16 | (rd) << 12 | (rm))
> +
> +#define ARM_RSB_I(rd, rn, imm) _AL3_I(ARM_INST_RSB, rd, rn, imm)
> +
> +#define ARM_SUB_R(rd, rn, rm) _AL3_R(ARM_INST_SUB, rd, rn, rm)
> +#define ARM_SUB_I(rd, rn, imm) _AL3_I(ARM_INST_SUB, rd, rn, imm)
> +
> +#define ARM_STR_I(rt, rn, off) (ARM_INST_STR_I | (rt) << 12 | (rn) << 16 \
> + | (off))
> +
> +#define ARM_TST_R(rn, rm) _AL3_R(ARM_INST_TST, 0, rn, rm)
> +#define ARM_TST_I(rn, imm) _AL3_I(ARM_INST_TST, 0, rn, imm)
> +
> +#define ARM_UDIV(rd, rn, rm) (ARM_INST_UDIV | (rd) << 16 | (rn) | (rm) << 8)
> +
> +#define ARM_UMULL(rd_lo, rd_hi, rn, rm) (ARM_INST_UMULL | (rd_hi) << 16 \
> + | (rd_lo) << 12 | (rm) << 8 | rn)
> +
> +#endif /* PFILTER_OPCODES_ARM_H */
Updated in the patch tracking system as 7259/3. Hopefully it's not too
late for the inclusion in 3.4.
Thanks,
Mircea
More information about the linux-arm-kernel
mailing list