[PATCH v5 3/4] clk: introduce the common clock framework
Turquette, Mike
mturquette at ti.com
Tue Mar 13 19:43:57 EDT 2012
On Tue, Mar 13, 2012 at 4:24 AM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> On Sat, Mar 03, 2012 at 12:29:00AM -0800, Mike Turquette wrote:
>> The common clock framework defines a common struct clk useful across
>> most platforms as well as an implementation of the clk api that drivers
>> can use safely for managing clocks.
>>
>> The net result is consolidation of many different struct clk definitions
>> and platform-specific clock framework implementations.
>>
>> This patch introduces the common struct clk, struct clk_ops and an
>> implementation of the well-known clock api in include/clk/clk.h.
>> Platforms may define their own hardware-specific clock structure and
>> their own clock operation callbacks, so long as it wraps an instance of
>> struct clk_hw.
>>
>> See Documentation/clk.txt for more details.
>>
>> This patch is based on the work of Jeremy Kerr, which in turn was based
>> on the work of Ben Herrenschmidt.
>>
>> Signed-off-by: Mike Turquette <mturquette at linaro.org>
>> Signed-off-by: Mike Turquette <mturquette at ti.com>
>> Cc: Jeremy Kerr <jeremy.kerr at canonical.com>
>> Cc: Thomas Gleixner <tglx at linutronix.de>
>> Cc: Arnd Bergman <arnd.bergmann at linaro.org>
>> Cc: Paul Walmsley <paul at pwsan.com>
>> Cc: Shawn Guo <shawn.guo at freescale.com>
>> Cc: Richard Zhao <richard.zhao at linaro.org>
>> Cc: Saravana Kannan <skannan at codeaurora.org>
>> Cc: Magnus Damm <magnus.damm at gmail.com>
>> Cc: Rob Herring <rob.herring at calxeda.com>
>> Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
>> Cc: Linus Walleij <linus.walleij at stericsson.com>
>> Cc: Stephen Boyd <sboyd at codeaurora.org>
>> Cc: Amit Kucheria <amit.kucheria at linaro.org>
>> Cc: Deepak Saxena <dsaxena at linaro.org>
>> Cc: Grant Likely <grant.likely at secretlab.ca>
>> Cc: Andrew Lunn <andrew at lunn.ch>
>> ---
>> drivers/clk/Kconfig | 28 +
>> drivers/clk/Makefile | 1 +
>> drivers/clk/clk.c | 1323 ++++++++++++++++++++++++++++++++++++++++++
>> include/linux/clk-private.h | 68 +++
>> include/linux/clk-provider.h | 169 ++++++
>> include/linux/clk.h | 68 ++-
>> 6 files changed, 1652 insertions(+), 5 deletions(-)
>> create mode 100644 drivers/clk/clk.c
>> create mode 100644 include/linux/clk-private.h
>> create mode 100644 include/linux/clk-provider.h
>>
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 3912576..18eb8c2 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -11,3 +11,31 @@ config HAVE_MACH_CLKDEV
>>
>> config HAVE_CLK_PREPARE
>> bool
>> +
>> +menuconfig COMMON_CLK
>> + bool "Common Clock Framework"
>> + select HAVE_CLK_PREPARE
>> + ---help---
>> + The common clock framework is a single definition of struct
>> + clk, useful across many platforms, as well as an
>> + implementation of the clock API in include/linux/clk.h.
>> + Architectures utilizing the common struct clk should select
>> + this automatically, but it may be necessary to manually select
>> + this option for loadable modules requiring the common clock
>> + framework.
>> +
>> + If in doubt, say "N".
>> +
>> +if COMMON_CLK
>> +
>> +config COMMON_CLK_DEBUG
>> + bool "DebugFS representation of clock tree"
>> + depends on COMMON_CLK
>> + ---help---
>> + Creates a directory hierchy in debugfs for visualizing the clk
>> + tree structure. Each directory contains read-only members
>> + that export information specific to that clk node: clk_rate,
>> + clk_flags, clk_prepare_count, clk_enable_count &
>> + clk_notifier_count.
>> +
>> +endif
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index 07613fa..ff362c4 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -1,2 +1,3 @@
>>
>> obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
>> +obj-$(CONFIG_COMMON_CLK) += clk.o
>> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
>> new file mode 100644
>> index 0000000..b979d74
>> --- /dev/null
>> +++ b/drivers/clk/clk.c
>> @@ -0,0 +1,1323 @@
>> +/*
>> + * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr at canonical.com>
>> + * Copyright (C) 2011-2012 Linaro Ltd <mturquette at linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * Standard functionality for the common clock API. See Documentation/clk.txt
>> + */
>> +
>> +#include <linux/clk-private.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/err.h>
>> +#include <linux/list.h>
>> +#include <linux/slab.h>
>> +
>> +static DEFINE_SPINLOCK(enable_lock);
>> +static DEFINE_MUTEX(prepare_lock);
>> +
>> +static HLIST_HEAD(clk_root_list);
>> +static HLIST_HEAD(clk_orphan_list);
>> +static LIST_HEAD(clk_notifier_list);
>> +
>> +/*** debugfs support ***/
>> +
>> +#ifdef CONFIG_COMMON_CLK_DEBUG
>> +#include <linux/debugfs.h>
>> +
>> +static struct dentry *rootdir;
>> +static struct dentry *orphandir;
>> +static int inited = 0;
>> +
>> +/* caller must hold prepare_lock */
>> +static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry)
>> +{
>> + struct dentry *d;
>> + int ret = -ENOMEM;
>> +
>> + if (!clk || !pdentry) {
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + d = debugfs_create_dir(clk->name, pdentry);
>> + if (!d)
>> + goto out;
>> +
>> + clk->dentry = d;
>> +
>> + d = debugfs_create_u32("clk_rate", S_IRUGO, clk->dentry,
>> + (u32 *)&clk->rate);
>> + if (!d)
>> + goto err_out;
>> +
>> + d = debugfs_create_x32("clk_flags", S_IRUGO, clk->dentry,
>> + (u32 *)&clk->flags);
>> + if (!d)
>> + goto err_out;
>> +
>> + d = debugfs_create_u32("clk_prepare_count", S_IRUGO, clk->dentry,
>> + (u32 *)&clk->prepare_count);
>> + if (!d)
>> + goto err_out;
>> +
>> + d = debugfs_create_u32("clk_enable_count", S_IRUGO, clk->dentry,
>> + (u32 *)&clk->enable_count);
>> + if (!d)
>> + goto err_out;
>> +
>> + d = debugfs_create_u32("clk_notifier_count", S_IRUGO, clk->dentry,
>> + (u32 *)&clk->notifier_count);
>> + if (!d)
>> + goto err_out;
>> +
>> + ret = 0;
>> + goto out;
>> +
>> +err_out:
>> + debugfs_remove(clk->dentry);
>> +out:
>> + return ret;
>> +}
>> +
>> +/* caller must hold prepare_lock */
>> +static int clk_debug_create_subtree(struct clk *clk, struct dentry *pdentry)
>> +{
>> + struct clk *child;
>> + struct hlist_node *tmp;
>> + int ret = -EINVAL;;
>> +
>> + if (!clk || !pdentry)
>> + goto out;
>> +
>> + ret = clk_debug_create_one(clk, pdentry);
>> +
>> + if (ret)
>> + goto out;
>> +
>> + hlist_for_each_entry(child, tmp, &clk->children, child_node)
>> + clk_debug_create_subtree(child, clk->dentry);
>> +
>> + ret = 0;
>> +out:
>> + return ret;
>> +}
>> +
>> +/**
>> + * clk_debug_register - add a clk node to the debugfs clk tree
>> + * @clk: the clk being added to the debugfs clk tree
>> + *
>> + * Dynamically adds a clk to the debugfs clk tree if debugfs has been
>> + * initialized. Otherwise it bails out early since the debugfs clk tree
>> + * will be created lazily by clk_debug_init as part of a late_initcall.
>> + *
>> + * Caller must hold prepare_lock. Only clk_init calls this function (so
>> + * far) so this is taken care.
>> + */
>> +static int clk_debug_register(struct clk *clk)
>> +{
>> + struct clk *parent;
>> + struct dentry *pdentry;
>> + int ret = 0;
>> +
>> + if (!inited)
>> + goto out;
>> +
>> + parent = clk->parent;
>> +
>> + /*
>> + * Check to see if a clk is a root clk. Also check that it is
>> + * safe to add this clk to debugfs
>> + */
>> + if (!parent)
>> + if (clk->flags & CLK_IS_ROOT)
>> + pdentry = rootdir;
>> + else
>> + pdentry = orphandir;
>> + else
>> + if (parent->dentry)
>> + pdentry = parent->dentry;
>> + else
>> + goto out;
>> +
>> + ret = clk_debug_create_subtree(clk, pdentry);
>> +
>> +out:
>> + return ret;
>> +}
>> +
>> +/**
>> + * clk_debug_init - lazily create the debugfs clk tree visualization
>> + *
>> + * clks are often initialized very early during boot before memory can
>> + * be dynamically allocated and well before debugfs is setup.
>> + * clk_debug_init walks the clk tree hierarchy while holding
>> + * prepare_lock and creates the topology as part of a late_initcall,
>> + * thus insuring that clks initialized very early will still be
>> + * represented in the debugfs clk tree. This function should only be
>> + * called once at boot-time, and all other clks added dynamically will
>> + * be done so with clk_debug_register.
>> + */
>> +static int __init clk_debug_init(void)
>> +{
>> + struct clk *clk;
>> + struct hlist_node *tmp;
>> +
>> + rootdir = debugfs_create_dir("clk", NULL);
>> +
>> + if (!rootdir)
>> + return -ENOMEM;
>> +
>> + orphandir = debugfs_create_dir("orphans", rootdir);
>> +
>> + if (!orphandir)
>> + return -ENOMEM;
>> +
>> + mutex_lock(&prepare_lock);
>> +
>> + hlist_for_each_entry(clk, tmp, &clk_root_list, child_node)
>> + clk_debug_create_subtree(clk, rootdir);
>> +
>> + hlist_for_each_entry(clk, tmp, &clk_orphan_list, child_node)
>> + clk_debug_create_subtree(clk, orphandir);
>> +
>> + inited = 1;
>> +
>> + mutex_unlock(&prepare_lock);
>> +
>> + return 0;
>> +}
>> +late_initcall(clk_debug_init);
>> +#else
>> +static inline int clk_debug_register(struct clk *clk) { return 0; }
>> +#endif /* CONFIG_COMMON_CLK_DEBUG */
>> +
>> +/*** helper functions ***/
>> +
>> +inline const char *__clk_get_name(struct clk *clk)
>> +{
>> + return !clk ? NULL : clk->name;
>> +}
>> +
>> +inline struct clk_hw *__clk_get_hw(struct clk *clk)
>> +{
>> + return !clk ? NULL : clk->hw;
>> +}
>> +
>> +inline u8 __clk_get_num_parents(struct clk *clk)
>> +{
>> + return !clk ? -EINVAL : clk->num_parents;
>> +}
>> +
>> +inline struct clk *__clk_get_parent(struct clk *clk)
>> +{
>> + return !clk ? NULL : clk->parent;
>> +}
>> +
>> +inline unsigned long __clk_get_rate(struct clk *clk)
>> +{
>> + return !clk ? -EINVAL : clk->rate;
>> +}
>> +
>> +inline unsigned long __clk_get_flags(struct clk *clk)
>> +{
>> + return !clk ? -EINVAL : clk->flags;
>> +}
>> +
>> +static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk)
>> +{
>> + struct clk *child;
>> + struct clk *ret;
>> + struct hlist_node *tmp;
>> +
>> + if (!strcmp(clk->name, name))
>> + return clk;
>> +
>> + hlist_for_each_entry(child, tmp, &clk->children, child_node) {
>> + ret = __clk_lookup_subtree(name, child);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +struct clk *__clk_lookup(const char *name)
>> +{
>> + struct clk *root_clk;
>> + struct clk *ret;
>> + struct hlist_node *tmp;
>> +
>
> This should have a check for NULL pointers. NULL pointers can happen
> here if a mux has holes in it. In this case the parent name array would
> look like this:
>
> { "parentclk1", "parentclk2", NULL /* reserved */, "parentclk3" }
>
> Without checking for NULL pointers we dereference the NULL pointer here.
I will add the check. I had not considered having NULL as one of the
parent names. It seems to me that the only time this would happen is
if we are wiring up discrete devices. For instance:
Device A has a fixed-rate clock named "dpll"
Device B has a mux clock named "leaf" with parent_names = { "32k",
"oscillator", "clkin" }
On a given board, leaf's "pll" parent might map to the output of the
dpll clock. I had considered that DT would step in here by creating
an intermediate clock with no functional clk_ops that would "connect"
these two clocks. The benefit of this is that it is easier to match
up clock names when staring at some data sheets. It is common for a
downstream device's data sheets to assign names to the external inputs
originating from some unknown device; unsurprisingly the data sheet
for the device supplying the external upstream clocks often has
different names for the output signals than the one in the downstream
device's data sheet. Using the method described above it is easy for
a person with both data sheets to see how the devices are wired up
since all of the clock names are represented by nodes in the clock
tree. In short, the final outcome would looking something like:
dpll (device a's driver registered this clock)
|
clkin (one of device b's possible parents)
| (it is a dummy clock from DT since it is board-level topology)
|
leaf (device b's driver registered this clock)
clkin would have a single parent named "dpll" in this case, and again,
it would have no meaningful clk_ops.
A caveat to the above scenario is that parent_names shouldn't have
holes in it, but a null pointer check is reasonable anyways.
What do you think? Even if we allow for muxes to have holes in
parent_names we'll still have to solve these sort of device
integration issues and DT will likely play a roll here. I'll roll in
the null pointer check regardless.
Also, do you forsee needing hole in parent_names for any reason other
than described above?
Thanks,
Mike
>
>> +
>> +/**
>> + * __clk_round_rate - round the given rate for a clk
>> + * @clk: round the rate of this clock
>> + *
>> + * Caller must hold prepare_lock. Useful for clk_ops such as .set_rate
>> + */
>> +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
>> +{
>> + if (!clk && !clk->ops->round_rate)
>> + return -EINVAL;
>
> This should return the parents rate if the clock itself does not
> have a round_rate function. Also, must be || instead of &&
>
>> +
>> + return clk->ops->round_rate(clk->hw, rate, NULL);
>> +}
>> +
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list