[PATCH v5 2/2] Regulator: Add Anatop regulator driver
Ying-Chun Liu (PaulLiu)
paul.liu at linaro.org
Thu Mar 1 04:10:52 EST 2012
From: "Ying-Chun Liu (PaulLiu)" <paul.liu at linaro.org>
Anatop is an integrated regulator inside i.MX6 SoC.
There are 3 digital regulators which controls PU, CORE (ARM), and SOC.
And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB).
This patch adds the Anatop regulator driver.
Signed-off-by: Nancy Chen <Nancy.Chen at freescale.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu at linaro.org>
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg at ti.com>
Cc: Samuel Ortiz <sameo at linux.intel.com>
Cc: Shawn Guo <shawn.guo at linaro.org>
---
.../bindings/regulator/anatop-regulator.txt | 28 +++
drivers/regulator/Kconfig | 6 +
drivers/regulator/Makefile | 1 +
drivers/regulator/anatop-regulator.c | 203 ++++++++++++++++++++
include/linux/regulator/anatop-regulator.h | 40 ++++
5 files changed, 278 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/anatop-regulator.txt
create mode 100644 drivers/regulator/anatop-regulator.c
create mode 100644 include/linux/regulator/anatop-regulator.h
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
new file mode 100644
index 0000000..9ed7326
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -0,0 +1,28 @@
+Anatop Voltage regulators
+
+Required properties:
+- compatible: Must be "fsl,anatop-regulator"
+- vol-bit-shift: Bit shift for the register
+- vol-bit-size: Number of bits used in the register
+- min-bit-val: Minimum value of this register
+- min-voltage: Minimum voltage of this regulator
+- max-voltage: Maximum voltage of this regulator
+
+Any property defined as part of the core regulator
+binding, defined in regulator.txt, can also be used.
+
+Example:
+
+ reg_vddpu: regulator-vddpu at 140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ reg = <0x140>;
+ vol-bit-shift = <9>;
+ vol-bit-size = <5>;
+ min-bit-val = <1>;
+ min-voltage = <725000>;
+ max-voltage = <1300000>;
+ };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7a61b17..5fbcda2 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -335,5 +335,11 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
+config REGULATOR_ANATOP
+ tristate "ANATOP LDO regulators"
+ depends on MFD_ANATOP
+ help
+ Say y here to support ANATOP LDOs regulators.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 503bac8..8440871 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -48,5 +48,6 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
+obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
new file mode 100644
index 0000000..1f3a878
--- /dev/null
+++ b/drivers/regulator/anatop-regulator.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/anatop-regulator.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regulator/of_regulator.h>
+
+static int anatop_set_voltage(struct regulator_dev *reg, int min_uV,
+ int max_uV, unsigned *selector)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ u32 val, sel;
+ int uv;
+
+ uv = min_uV;
+ dev_dbg(®->dev, "%s: uv %d, min %d, max %d\n", __func__,
+ uv, anatop_reg->min_voltage,
+ anatop_reg->max_voltage);
+
+ if (uv < anatop_reg->min_voltage) {
+ if (max_uV > anatop_reg->min_voltage)
+ uv = anatop_reg->min_voltage;
+ else
+ return -EINVAL;
+ }
+
+ if (anatop_reg->control_reg) {
+ sel = (uv - anatop_reg->min_voltage) / 25000;
+ if (sel * 25000 + anatop_reg->min_voltage
+ > anatop_reg->max_voltage)
+ return -EINVAL;
+ val = anatop_reg->min_bit_val + sel;
+ *selector = sel;
+ dev_dbg(®->dev, "%s: calculated val %d\n", __func__, val);
+ anatop_set_bits(anatop_reg->mfd,
+ anatop_reg->control_reg,
+ anatop_reg->vol_bit_shift,
+ anatop_reg->vol_bit_size,
+ val);
+ return 0;
+ } else {
+ return -ENOTSUPP;
+ }
+}
+
+static int anatop_get_voltage_sel(struct regulator_dev *reg)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ int selector;
+
+ if (anatop_reg->control_reg) {
+ u32 val = anatop_get_bits(anatop_reg->mfd,
+ anatop_reg->control_reg,
+ anatop_reg->vol_bit_shift,
+ anatop_reg->vol_bit_size);
+ selector = val - anatop_reg->min_bit_val;
+ return selector;
+ } else {
+ return -ENOTSUPP;
+ }
+}
+
+static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ int uv;
+
+ uv = anatop_reg->min_voltage + selector * 25000;
+ dev_dbg(®->dev, "vddio = %d, selector = %u\n", uv, selector);
+
+ return uv;
+}
+
+static struct regulator_ops anatop_rops = {
+ .set_voltage = anatop_set_voltage,
+ .get_voltage_sel = anatop_get_voltage_sel,
+ .list_voltage = anatop_list_voltage,
+};
+
+int anatop_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct regulator_desc *rdesc;
+ struct regulator_dev *rdev;
+ struct anatop_regulator *sreg;
+ struct regulator_init_data *initdata;
+ struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
+ const __be32 *rval;
+ u64 ofsize;
+
+ initdata = of_get_regulator_init_data(dev, dev->of_node);
+ sreg = devm_kzalloc(dev, sizeof(struct anatop_regulator), GFP_KERNEL);
+ if (!sreg)
+ return -EINVAL;
+ rdesc = devm_kzalloc(dev, sizeof(struct regulator_desc), GFP_KERNEL);
+ if (!rdesc)
+ return -EINVAL;
+ sreg->initdata = initdata;
+ sreg->regulator = rdesc;
+ memset(rdesc, 0, sizeof(struct regulator_desc));
+ rdesc->name = kstrdup(of_get_property(np, "regulator-name", NULL),
+ GFP_KERNEL);
+ rdesc->ops = &anatop_rops;
+ rdesc->type = REGULATOR_VOLTAGE;
+ rdesc->owner = THIS_MODULE;
+ sreg->name = rdesc->name;
+ sreg->mfd = anatopmfd;
+ rval = of_get_address(np, 0, &ofsize, NULL);
+ if (rval)
+ sreg->control_reg = be32_to_cpu(*rval);
+ rval = of_get_property(np, "vol-bit-size", NULL);
+ if (rval)
+ sreg->vol_bit_size = be32_to_cpu(*rval);
+ rval = of_get_property(np, "vol-bit-shift", NULL);
+ if (rval)
+ sreg->vol_bit_shift = be32_to_cpu(*rval);
+ rval = of_get_property(np, "min-bit-val", NULL);
+ if (rval)
+ sreg->min_bit_val = be32_to_cpu(*rval);
+ rval = of_get_property(np, "min-voltage", NULL);
+ if (rval)
+ sreg->min_voltage = be32_to_cpu(*rval);
+ rval = of_get_property(np, "max-voltage", NULL);
+ if (rval)
+ sreg->max_voltage = be32_to_cpu(*rval);
+
+ /* register regulator */
+ rdev = regulator_register(rdesc, &pdev->dev,
+ initdata, sreg, pdev->dev.of_node);
+ platform_set_drvdata(pdev, rdev);
+
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ rdesc->name);
+ kfree(rdesc->name);
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+int anatop_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ regulator_unregister(rdev);
+ return 0;
+}
+
+struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = {
+ { .compatible = "fsl,anatop-regulator", },
+ { /* end */ }
+};
+
+struct platform_driver anatop_regulator = {
+ .driver = {
+ .name = "anatop_regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_anatop_regulator_match_tbl,
+ },
+ .probe = anatop_regulator_probe,
+ .remove = anatop_regulator_remove,
+};
+
+int anatop_regulator_init(void)
+{
+ return platform_driver_register(&anatop_regulator);
+}
+postcore_initcall(anatop_regulator_init);
+
+void anatop_regulator_exit(void)
+{
+ platform_driver_unregister(&anatop_regulator);
+}
+module_exit(anatop_regulator_exit);
+
+MODULE_DESCRIPTION("ANATOP Regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/anatop-regulator.h b/include/linux/regulator/anatop-regulator.h
new file mode 100644
index 0000000..7a9a05b
--- /dev/null
+++ b/include/linux/regulator/anatop-regulator.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __ANATOP_REGULATOR_H
+#define __ANATOP_REGULATOR_H
+
+#include <linux/regulator/driver.h>
+#include <linux/mfd/anatop.h>
+
+struct anatop_regulator {
+ struct regulator_desc *regulator;
+ struct regulator_init_data *initdata;
+ const char *name;
+ u32 control_reg;
+ struct anatop *mfd;
+ int vol_bit_shift;
+ int vol_bit_size;
+ int min_bit_val;
+ int min_voltage;
+ int max_voltage;
+};
+
+#endif /* __ANATOP_REGULATOR_H */
--
1.7.9
More information about the linux-arm-kernel
mailing list