[PATCH v2 1/4] mmc: omap_hsmmc: Convert hsmmc driver to use device tree
Rajendra Nayak
rnayak at ti.com
Wed Mar 7 22:46:01 EST 2012
Hi Rob/Grant,
On Thursday 23 February 2012 05:31 PM, Rajendra Nayak wrote:
> Define dt bindings for the ti-omap-hsmmc, and adapt
> the driver to extract data (which was earlier passed as
> platform_data) from device tree.
Any comments on these bindings for omap hsmmc? All the dependent
patches/series on which this series was based have now made it to
the respective -next of Mark and Chris.
regards,
Rajendra
>
> Signed-off-by: Rajendra Nayak<rnayak at ti.com>
> ---
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 31 +++++++++
> drivers/mmc/host/omap_hsmmc.c | 68 ++++++++++++++++++++
> 2 files changed, 99 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> new file mode 100644
> index 0000000..e4fa8f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -0,0 +1,31 @@
> +* TI Highspeed MMC host controller for OMAP
> +
> +The Highspeed MMC Host Controller on TI OMAP family
> +provides an interface for MMC, SD, and SDIO types of memory cards.
> +
> +Required properties:
> +- compatible:
> + Should be "ti,omap2-hsmmc", for OMAP2/3 controllers
> + Should be "ti,omap4-hsmmc", for OMAP4 controllers
> +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
> +- reg : should contain hsmmc registers location and length
> +
> +Optional properties:
> +ti,dual-volt: boolean, supports dual voltage cards
> +<supply-name>-supply: phandle to the regulator device tree node
> +"supply-name" examples are "vmmc", "vmmc_aux" etc
> +ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
> +cd-gpios: GPIOs for card detection
> +wp-gpios: GPIOs for write protection
> +ti,non-removable: non-removable slot (like eMMC)
> +
> +Example:
> + mmc1: mmc at 0x4809c000 {
> + compatible = "ti,omap4-hsmmc";
> + reg =<0x4809c000 0x400>;
> + ti,hwmods = "mmc1";
> + ti,dual-volt;
> + ti,bus-width =<4>;
> + vmmc-supply =<&vmmc>; /* phandle to regulator node */
> + ti,non-removable;
> + };
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 35f6dc1..0c93d58 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -26,6 +26,9 @@
> #include<linux/platform_device.h>
> #include<linux/timer.h>
> #include<linux/clk.h>
> +#include<linux/of.h>
> +#include<linux/of_gpio.h>
> +#include<linux/of_device.h>
> #include<linux/mmc/host.h>
> #include<linux/mmc/core.h>
> #include<linux/mmc/mmc.h>
> @@ -1718,6 +1721,46 @@ static void omap_hsmmc_debugfs(struct mmc_host *mmc)
>
> #endif
>
> +#ifdef CONFIG_OF
> +static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
> +{
> + struct omap_mmc_platform_data *pdata;
> + struct device_node *np = dev->of_node;
> + u32 bus_width;
> +
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return NULL; /* out of memory */
> +
> + if (of_find_property(np, "ti,dual-volt", NULL))
> + pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
> +
> + /* This driver only supports 1 slot */
> + pdata->nr_slots = 1;
> + pdata->slots[0].switch_pin = of_get_named_gpio(np, "cd-gpios", 0);
> + pdata->slots[0].gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
> +
> + if (of_find_property(np, "ti,non-removable", NULL)) {
> + pdata->slots[0].nonremovable = true;
> + pdata->slots[0].no_regulator_off_init = true;
> + }
> + of_property_read_u32(np, "ti,bus-width",&bus_width);
> + if (bus_width == 4)
> + pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
> + else if (bus_width == 8)
> + pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA;
> + return pdata;
> +}
> +#else
> +static inline struct omap_mmc_platform_data
> + *of_get_hsmmc_pdata(struct device *dev)
> +{
> + return NULL;
> +}
> +#endif
> +
> +static const struct of_device_id omap_mmc_of_match[];
> +
> static int __init omap_hsmmc_probe(struct platform_device *pdev)
> {
> struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
> @@ -1725,6 +1768,14 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
> struct omap_hsmmc_host *host = NULL;
> struct resource *res;
> int ret, irq;
> + const struct of_device_id *match;
> +
> + match = of_match_device(omap_mmc_of_match,&pdev->dev);
> + if (match) {
> + pdata = of_get_hsmmc_pdata(&pdev->dev);
> + if (match->data)
> + pdata->reg_offset = *(u16 *)match->data;
> + }
>
> if (pdata == NULL) {
> dev_err(&pdev->dev, "Platform Data is missing\n");
> @@ -2120,12 +2171,29 @@ static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
> .runtime_resume = omap_hsmmc_runtime_resume,
> };
>
> +#if defined(CONFIG_OF)
> +static u16 omap4_reg_offset = 0x100;
> +
> +static const struct of_device_id omap_mmc_of_match[] = {
> + {
> + .compatible = "ti,omap2-hsmmc",
> + },
> + {
> + .compatible = "ti,omap4-hsmmc",
> + .data =&omap4_reg_offset,
> + },
> + {},
> +}
> +MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
> +#endif
> +
> static struct platform_driver omap_hsmmc_driver = {
> .remove = omap_hsmmc_remove,
> .driver = {
> .name = DRIVER_NAME,
> .owner = THIS_MODULE,
> .pm =&omap_hsmmc_dev_pm_ops,
> + .of_match_table = of_match_ptr(omap_mmc_of_match),
> },
> };
>
More information about the linux-arm-kernel
mailing list