[PATCH 02/10] ARM: OMAP2+: SmartReflex: move the platform specific macros in plat-omap
jean.pihet at newoldbits.com
jean.pihet at newoldbits.com
Thu Mar 15 12:43:57 EDT 2012
From: Jean Pihet <j-pihet at ti.com>
Move the platform specific macros from the smartreflex header file
(arch/arm/mach-omap2/smartreflex.h) in a new header file in plat-omap
(arch/arm/plat-omap/include/plat/smartreflex.h).
This change makes the SmartReflex implementation ready for the move
to drivers/.
Signed-off-by: Jean Pihet <j-pihet at ti.com>
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 3 +-
arch/arm/mach-omap2/smartreflex.h | 42 ----------------
arch/arm/mach-omap2/sr_device.c | 2 +-
arch/arm/plat-omap/include/plat/smartreflex.h | 65 +++++++++++++++++++++++++
5 files changed, 68 insertions(+), 47 deletions(-)
create mode 100644 arch/arm/plat-omap/include/plat/smartreflex.h
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 0cc6a40..1f681e8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -26,10 +26,9 @@
#include <plat/mcbsp.h>
#include <plat/mcspi.h>
#include <plat/dmtimer.h>
+#include <plat/smartreflex.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
#include "wd_timer.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 48e5834..a1e359f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,10 +30,9 @@
#include <plat/mmc.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
+#include <plat/smartreflex.h>
#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index 5809141..cb8d98a 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -152,14 +152,6 @@ struct omap_sr_pmic_data {
void (*sr_pmic_init) (void);
};
-/**
- * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
- *
- * @sensor_voltdm_name: Name of voltdomain of SR instance
- */
-struct omap_smartreflex_dev_attr {
- const char *sensor_voltdm_name;
-};
#ifdef CONFIG_OMAP_SMARTREFLEX
/*
@@ -194,40 +186,6 @@ struct omap_sr_class_data {
u8 class_type;
};
-/**
- * struct omap_sr_nvalue_table - Smartreflex n-target value info
- *
- * @efuse_offs: The offset of the efuse where n-target values are stored.
- * @nvalue: The n-target value.
- */
-struct omap_sr_nvalue_table {
- u32 efuse_offs;
- u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type: Smartreflex IP type.
- * @senp_mod: SENPENABLE value for the sr
- * @senn_mod: SENNENABLE value for sr
- * @nvalue_count: Number of distinct nvalues in the nvalue table
- * @enable_on_init: whether this sr module needs to enabled at
- * boot up or not.
- * @nvalue_table: table containing the efuse offsets and nvalues
- * corresponding to them.
- * @voltdm: Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
- int ip_type;
- u32 senp_mod;
- u32 senn_mod;
- int nvalue_count;
- bool enable_on_init;
- struct omap_sr_nvalue_table *nvalue_table;
- struct voltagedomain *voltdm;
-};
-
/* Smartreflex module enable/disable interface */
void omap_sr_enable(struct voltagedomain *voltdm);
void omap_sr_disable(struct voltagedomain *voltdm);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e..dad1473 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,8 +23,8 @@
#include <linux/io.h>
#include <plat/omap_device.h>
+#include <plat/smartreflex.h>
-#include "smartreflex.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
new file mode 100644
index 0000000..baa296f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/smartreflex.h
@@ -0,0 +1,65 @@
+/*
+ * OMAP Platform Smartreflex Defines and Routines
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Jean Pihet <j-pihet at ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970 at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_PLATOMAP_SMARTREFLEX_H
+#define __ASM_ARM_PLATOMAP_SMARTREFLEX_H
+
+#include "voltage.h"
+
+/**
+ * struct omap_sr_nvalue_table - Smartreflex n-target value info
+ *
+ * @efuse_offs: The offset of the efuse where n-target values are stored.
+ * @nvalue: The n-target value.
+ */
+struct omap_sr_nvalue_table {
+ u32 efuse_offs;
+ u32 nvalue;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @ip_type: Smartreflex IP type.
+ * @senp_mod: SENPENABLE value for the sr
+ * @senn_mod: SENNENABLE value for sr
+ * @nvalue_count: Number of distinct nvalues in the nvalue table
+ * @enable_on_init: whether this sr module needs to enabled at
+ * boot up or not.
+ * @nvalue_table: table containing the efuse offsets and nvalues
+ * corresponding to them.
+ * @voltdm: Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+ int ip_type;
+ u32 senp_mod;
+ u32 senn_mod;
+ int nvalue_count;
+ bool enable_on_init;
+ struct omap_sr_nvalue_table *nvalue_table;
+ struct voltagedomain *voltdm;
+};
+
+/**
+ * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
+ *
+ * @sensor_voltdm_name: Name of voltdomain of SR instance
+ */
+struct omap_smartreflex_dev_attr {
+ const char *sensor_voltdm_name;
+};
+
+#endif
--
1.7.5.4
More information about the linux-arm-kernel
mailing list