[PATCH 3/4] ARM: kirkwood: convert rtc-mv to fdt.

[Grant Likely]

On Thu,  1 Mar 2012 18:20:54 +0000, Jason Cooper <jason at lakedaemon.net> wrote:
> The comment at mach-kirkwood/common.c:469, says this device is in every
> kirkwood board.  So, it is placed in kirkwood.dtsi.
> 
> Signed-off-by: Jason Cooper <jason at lakedaemon.net>
> ---
>  arch/arm/boot/dts/kirkwood.dtsi   |    6 ++++++
>  arch/arm/mach-kirkwood/board-dt.c |    1 -
>  arch/arm/mach-kirkwood/common.c   |    2 +-
>  arch/arm/mach-kirkwood/common.h   |    1 -
>  drivers/rtc/rtc-mv.c              |   19 +++++++++++++++++++
>  5 files changed, 26 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 771c6bb..5fb185c 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -2,5 +2,11 @@
>  
>  / {
>  	compatible = "marvell,kirkwood";
> +
> +	rtc at f1010300 {
> +		compatible = "marvell,rtc";
> +		reg = <0xf1010300 0x1f>;
> +		interrupts = <53>;
> +	};
>  };
>  
> diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
> index a0cc28b..6fc41ae 100644
> --- a/arch/arm/mach-kirkwood/board-dt.c
> +++ b/arch/arm/mach-kirkwood/board-dt.c
> @@ -135,7 +135,6 @@ static void __init kirkwood_dt_init(void)
>  #endif
>  
>  	/* internal devices that every board has */
> -	kirkwood_rtc_init();
>  	kirkwood_wdt_init();
>  	kirkwood_xor0_init();
>  	kirkwood_xor1_init();
> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
> index 167b6c8..0c0375f 100644
> --- a/arch/arm/mach-kirkwood/common.c
> +++ b/arch/arm/mach-kirkwood/common.c
> @@ -163,7 +163,7 @@ void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
>  /*****************************************************************************
>   * SoC RTC
>   ****************************************************************************/
> -void __init kirkwood_rtc_init(void)
> +static void __init kirkwood_rtc_init(void)

This undoes the code changed in the previous patch.  If you reorder the patches then
this change goes away in both.

>  {
>  	orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
>  }
> diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
> index c382447..ca08826 100644
> --- a/arch/arm/mach-kirkwood/common.h
> +++ b/arch/arm/mach-kirkwood/common.h
> @@ -53,7 +53,6 @@ void kirkwood_restart(char, const char *);
>  
>  char *kirkwood_id(void);
>  void kirkwood_l2_init(void);
> -void kirkwood_rtc_init(void);
>  void kirkwood_wdt_init(void);
>  void kirkwood_xor0_init(void);
>  void kirkwood_xor1_init(void);
> diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
> index 768e2ed..38abbf7 100644
> --- a/drivers/rtc/rtc-mv.c
> +++ b/drivers/rtc/rtc-mv.c
> @@ -12,6 +12,8 @@
>  #include <linux/bcd.h>
>  #include <linux/io.h>
>  #include <linux/platform_device.h>
> +#include <linux/of_address.h>
> +#include <linux/of.h>
>  #include <linux/delay.h>
>  #include <linux/gfp.h>
>  #include <linux/module.h>
> @@ -218,10 +220,15 @@ static int __devinit mv_rtc_probe(struct platform_device *pdev)
>  {
>  	struct resource *res;
>  	struct rtc_plat_data *pdata;
> +	struct device_node *np = pdev->dev.of_node;
>  	resource_size_t size;
>  	u32 rtc_time;
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> +	if (np)
> +		of_address_to_resource(np, 0, res);
> +

This should not be needed.  The of_platform_populate() code should have
filled the platform_device with mem resources.

>  	if (!res)
>  		return -ENODEV;
>  
> @@ -257,6 +264,8 @@ static int __devinit mv_rtc_probe(struct platform_device *pdev)
>  
>  	pdata->irq = platform_get_irq(pdev, 0);
>  
> +	of_property_read_u32(np, "interrupts", &pdata->irq);
> +

Definitely don't do this.  Same as with memory regions, the irq will be
pre-populated in the platform device resource table.  platform_get_irq()
should already work.

>  	platform_set_drvdata(pdev, pdata);
>  
>  	if (pdata->irq >= 0) {
> @@ -294,11 +303,21 @@ static int __exit mv_rtc_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_OF
> +static struct of_device_id rtc_mv_of_match_table[] = {
> +	{ .compatible = "marvell,rtc", },
> +	{}
> +};
> +#else
> +#define rtc_mv_of_match_table NULL
> +#endif
> +
>  static struct platform_driver mv_rtc_driver = {
>  	.remove		= __exit_p(mv_rtc_remove),
>  	.driver		= {
>  		.name	= "rtc-mv",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = rtc_mv_of_match_table,

should be:
		.of_match_table = of_match_ptr(rtc_mv_of_match_table),

that would get rid of the #else clause above.

>  	},
>  };
>  
> -- 
> 1.7.3.4
> 

-- 
email sent from notmuch.vim plugin