linux-next: manual merge of the arm-soc tree with the omap_dss2 tree
Stephen Rothwell
sfr at canb.auug.org.au
Thu Mar 8 00:51:16 EST 2012
Hi all,
Today's linux-next merge of the arm-soc tree got a conflict in
arch/arm/mach-omap1/board-ams-delta.c between commit ddba6c7f7ec6
("OMAP1: pass LCD config with omapfb_set_lcd_config()") from the
omap_dss2 tree and commits 5ca6180fa6d7 ("ARM: OMAP1: ams-delta:
supersede custom led device by leds-gpio") and 2e3ee9f45b3c ("ARM: OMAP1:
Move most of plat/io.h into local iomap.h") from the arm-soc tree.
I fixed it up (see below) and can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr at canb.auug.org.au
diff --cc arch/arm/mach-omap1/board-ams-delta.c
index e0e8245,c847597..0000000
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@@ -20,7 -21,7 +21,8 @@@
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
+#include <linux/omapfb.h>
+ #include <linux/io.h>
#include <media/soc_camera.h>
@@@ -170,6 -162,117 +163,113 @@@ static struct omap_usb_config ams_delta
.pins[0] = 2,
};
-static struct omap_board_config_kernel ams_delta_config[] __initdata = {
- { OMAP_TAG_LCD, &ams_delta_lcd_config },
-};
-
+ #define LATCH1_GPIO_BASE 232
+ #define LATCH1_NGPIO 8
+
+ static struct resource latch1_resources[] __initconst = {
+ [0] = {
+ .name = "dat",
+ .start = LATCH1_PHYS,
+ .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+
+ static struct bgpio_pdata latch1_pdata __initconst = {
+ .base = LATCH1_GPIO_BASE,
+ .ngpio = LATCH1_NGPIO,
+ };
+
+ static struct platform_device latch1_gpio_device = {
+ .name = "basic-mmio-gpio",
+ .id = 0,
+ .resource = latch1_resources,
+ .num_resources = ARRAY_SIZE(latch1_resources),
+ .dev = {
+ .platform_data = &latch1_pdata,
+ },
+ };
+
+ static struct resource latch2_resources[] __initconst = {
+ [0] = {
+ .name = "dat",
+ .start = LATCH2_PHYS,
+ .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+ .flags = IORESOURCE_MEM,
+ },
+ };
+
+ static struct bgpio_pdata latch2_pdata __initconst = {
+ .base = AMS_DELTA_LATCH2_GPIO_BASE,
+ .ngpio = AMS_DELTA_LATCH2_NGPIO,
+ };
+
+ static struct platform_device latch2_gpio_device = {
+ .name = "basic-mmio-gpio",
+ .id = 1,
+ .resource = latch2_resources,
+ .num_resources = ARRAY_SIZE(latch2_resources),
+ .dev = {
+ .platform_data = &latch2_pdata,
+ },
+ };
+
+ static struct gpio latch_gpios[] __initconst = {
+ {
+ .gpio = LATCH1_GPIO_BASE + 6,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit1",
+ },
+ {
+ .gpio = LATCH1_GPIO_BASE + 7,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit2",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_rstin",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_cmdvcc",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_nreset",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_codec",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash1",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash2",
+ },
+ };
+
+ void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
+ {
+ int bit = 0;
+ u16 bitpos = 1 << bit;
+
+ for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
+ if (!(mask & bitpos))
+ continue;
+ gpio_set_value(base + bit, (value & bitpos) != 0);
+ }
+ }
+ EXPORT_SYMBOL(ams_delta_latch_write);
+
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120308/0dd7fc49/attachment.sig>
More information about the linux-arm-kernel
mailing list