February 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 1 00:02:35 PST 2017
Ending: Tue Feb 28 23:42:33 PST 2017
Messages: 5845

• [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Christoffer Dall
  • [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Christoffer Dall
    • [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Jintack Lim
      • [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Christoffer Dall
      • [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Marc Zyngier
    • [RFC v2 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Marc Zyngier
• [PATCH 2/8] power: add power sequence library   Greg Kroah-Hartman
  • [PATCH 2/8] power: add power sequence library   Peter Chen
    • [PATCH 2/8] power: add power sequence library   Rafael J. Wysocki
      • [PATCH 2/8] power: add power sequence library   Peter Chen
• [PATCH 0/5] arm64: dts: r8a779[56]: EtherAVB Gigabit timing enhancements   Simon Horman
  • [PATCH 2/5] arm64: dts: r8a7795: salvator-x: Fix EthernetAVB PHY timing   Simon Horman
  • [PATCH 3/5] arm64: dts: h3ulcb: Fix EthernetAVB PHY timing   Simon Horman
  • [PATCH 4/5] arm64: dts: r8a7796: Use rgmii-txid phy-mode for EthernetAVB   Simon Horman
  • [PATCH 5/5] arm64: dts: r8a7796: salvator-x: Fix EthernetAVB PHY timing   Simon Horman
  • [PATCH 0/5] arm64: dts: r8a779[56]: EtherAVB Gigabit timing enhancements   Simon Horman
• [PATCH 1/5] arm64: dts: r8a7795: Use rgmii-txid phy-mode for EthernetAVB   Simon Horman
• [PATCH v3 1/2] dt-bindings: gpu: Add Mali Utgard bindings   Maxime Ripard
  • [PATCH v3 1/2] dt-bindings: gpu: Add Mali Utgard bindings   Rob Herring
    • [PATCH v3 1/2] dt-bindings: gpu: Add Mali Utgard bindings   Maxime Ripard
• [PATCH v3 2/2] ARM: sun8i: dt: Add mali node   Maxime Ripard
  • [PATCH v3 2/2] ARM: sun8i: dt: Add mali node   Chen-Yu Tsai
• [PATCH] ARM: dts: armada-38x add node labels   Chris Packham
  • [PATCH] ARM: dts: armada-38x add node labels   Gregory CLEMENT
• [PATCH] crypto: arm64/crc32 - detect crc32 support in assembler   Ard Biesheuvel
  • [PATCH] crypto: arm64/crc32 - detect crc32 support in assembler   Ard Biesheuvel
    • [PATCH] crypto: arm64/crc32 - detect crc32 support in assembler   Alexander Graf
      • [PATCH] crypto: arm64/crc32 - detect crc32 support in assembler   Ard Biesheuvel
• [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
  • [PATCH v3 00/24] i.MX Media Driver   Philipp Zabel
    • [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v3 00/24] i.MX Media Driver   Philipp Zabel
      • [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
    • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
      • [PATCH v3 00/24] i.MX Media Driver   Laurent Pinchart
      • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
  • [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
    • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
    • [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
      • [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
      • [PATCH v3 00/24] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
  • [PATCH v3 00/24] i.MX Media Driver   Steve Longerbeam
    • [PATCH v3 00/24] i.MX Media Driver   Philipp Zabel
• [PATCH v2] initramfs: finish fput() before accessing any binary from initramfs   Lokesh Vutla
  • [PATCH v2] initramfs: finish fput() before accessing any binary from initramfs   Al Viro
    • [PATCH v2] initramfs: finish fput() before accessing any binary from initramfs   Lokesh Vutla
• [GIT PULL] Ux500 devicetree changes for v4.11   Linus Walleij
  • [GIT PULL] Ux500 devicetree changes for v4.11   Arnd Bergmann
    • [GIT PULL] Ux500 devicetree changes for v4.11   Linus Walleij
  • [GIT PULL] Ux500 devicetree changes for v4.11   Arnd Bergmann
• [PATCH v6 1/5] dt-bindings: clarify compatible property for rockchip timers   Heiko Stuebner
• [PATCH v6 2/5] ARM: dts: rockchip: update compatible property for rk322x timer   Heiko Stuebner
• [PATCH v6 4/5] ARM: dts: rockchip: add timer entries to rk3188 SoC   Heiko Stuebner
• [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Archit Taneja
  • Re:?==?utf-8?q? [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Peter Senna Tschudin
    • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Daniel Vetter
      • Re:?==?utf-8?q? [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Peter Senna Tschudin
      • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Archit Taneja
      • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Emil Velikov
      • Re:?==?utf-8?q? [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Peter Senna Tschudin
      • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Emil Velikov
      • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Daniel Vetter
      • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Emil Velikov
      • [PATCH V7 3/4] drm/bridge: Add driver for GE B850v3 LVDS/DP++ Bridge   Daniel Vetter
• [PATCH] arm64: Improve parking of stopped CPUs   Jayachandran C
  • [PATCH] arm64: Improve parking of stopped CPUs   Will Deacon
    • [PATCH] arm64: Improve parking of stopped CPUs   Suzuki K Poulose
      • [PATCH] arm64: Improve parking of stopped CPUs   Will Deacon
      • [PATCH] arm64: Improve parking of stopped CPUs   Jayachandran C
• [PATCH v6 5/5] ARM: dts: rockchip: disable arm-global-timer for rk3188   Heiko Stuebner
• [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   David Howells
  • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   Ard Biesheuvel
    • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   David Howells
      • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   Ard Biesheuvel
      • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   David Howells
      • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   Ard Biesheuvel
      • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   Matt Fleming
      • [PATCH 6/7] efi: Handle secure boot from UEFI-2.6 [ver #7]   Ard Biesheuvel
• [RFC v2 05/10] KVM: arm/arm64: Initialize the emulated EL1 physical timer   Marc Zyngier
• [PATCH 3/7] arm64: arm_arch_timer: remove fsl-a008585 parameter   Daniel Lezcano
• [PATCH 4/7] arm64: arch_timer: introduce generic errata handling infrastructure   Daniel Lezcano
  • [PATCH 4/7] arm64: arch_timer: introduce generic errata handling infrastructure   Daniel Lezcano
• [PATCH] KVM: arm/arm64: Remove kvm_vgic_inject_mapped_irq   Christoffer Dall
  • [PATCH] KVM: arm/arm64: Remove kvm_vgic_inject_mapped_irq   Marc Zyngier
  • [PATCH] KVM: arm/arm64: Remove kvm_vgic_inject_mapped_irq   Andre Przywara
• [PATCH] arm64: dts: apq8016-sbc: Add ramoops   Bjorn Andersson
  • [PATCH] arm64: dts: apq8016-sbc: Add ramoops   Stephen Boyd
• [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Gerd Hoffmann
  • [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Gerd Hoffmann
    • [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Michael Zoran
      • [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Stefan Wahren
      • [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Michael Zoran
    • [RESENT PATCH] ARM: bcm2835: Add devicetree for the Raspberry Pi 3, for arm (32)   Eric Anholt
• [PATCH v3 0/3] ARM: !MMU: v7-A support, dynamic vectors base handling   Vladimir Murzin
  • [PATCH v3 0/3] ARM: !MMU: v7-A support, dynamic vectors base handling   Afzal Mohammed
• [PATCH 3/4] drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)   Archit Taneja
  • [PATCH 3/4] drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)   Peter Senna Tschudin
    • [PATCH 3/4] drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)   Archit Taneja
• [PATCH v1] ASoC: bcm2835: Remove redundant channel checking code in hw_params   Mark Brown
  • [alsa-devel] [PATCH v1] ASoC: bcm2835: Remove redundant channel checking code in hw_params   Mark Brown
• [PATCH 1/4] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
  • [PATCH 1/4] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Rob Herring
    • [PATCH 1/4] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
• [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Arnd Bergmann
  • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Arnd Bergmann
    • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Linus Walleij
      • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Arnd Bergmann
  • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Rob Herring
    • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Linus Walleij
  • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Linus Walleij
  • [PATCH 1/4] PCI: add DT bindings for Cortina Gemini PCI Host Bridge   Linus Walleij
• [PATCH net-next 5/6] drivers: net: xgene-v2: Add transmit and receive   David Laight
  • [PATCH net-next 5/6] drivers: net: xgene-v2: Add transmit and receive   Iyappan Subramanian
  • [PATCH net-next 5/6] drivers: net: xgene-v2: Add transmit and receive   Iyappan Subramanian
• [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Arnd Bergmann
  • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Linus Walleij
    • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Arnd Bergmann
      • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Linus Walleij
  • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Hans Ulli Kroll
    • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Linus Walleij
  • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Linus Walleij
    • [PATCH 2/4] PCI: add driver for Cortina Gemini Host Bridge   Bjorn Helgaas
• [PATCH v2] ARM: dts: r8a7791: link DU to VSPDs   Magnus Damm
  • [PATCH v2] ARM: dts: r8a7791: link DU to VSPDs   Sergei Shtylyov
    • [PATCH v2] ARM: dts: r8a7791: link DU to VSPDs   Magnus Damm
      • [PATCH v2] ARM: dts: r8a7791: link DU to VSPDs   Sergei Shtylyov
• [STLinux Kernel] [PATCH 3/8] serial: st-asc: Read in all Pinctrl states   Peter Griffin
  • [STLinux Kernel] [PATCH 3/8] serial: st-asc: Read in all Pinctrl states   Lee Jones
• [PATCH] efi: arm: remove pointless dummy .reloc section   Ard Biesheuvel
• [PATCH] staging: bcm2835-audio: use | instead of || otherwise result is just boolean 1   Colin King
• [PATCH v3 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31   Mark Brown
  • [PATCH v3 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31   Mylene Josserand
  • [PATCH v3 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31   Rob Herring
• [PATCH] virtio: Try to untangle DMA coherency   Robin Murphy
  • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
    • [PATCH] virtio: Try to untangle DMA coherency   Rob Herring
  • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
  • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
    • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
      • [PATCH] virtio: Try to untangle DMA coherency   Robin Murphy
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Marc Zyngier
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Ard Biesheuvel
      • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Will Deacon
      • [PATCH] virtio: Try to untangle DMA coherency   Alexander Graf
      • [PATCH] virtio: Try to untangle DMA coherency   Michael S. Tsirkin
      • [PATCH] virtio: Try to untangle DMA coherency   Alexander Graf
• [PATCH V6 1/5] LIB: Indirect ISA/LPC port IO introduced   Gabriele Paoloni
  • [PATCH V6 1/5] LIB: Indirect ISA/LPC port IO introduced   zhichang.yuan
    • [PATCH V6 1/5] LIB: Indirect ISA/LPC port IO introduced   Alexander Graf
  • [PATCH V6 1/5] LIB: Indirect ISA/LPC port IO introduced   zhichang.yuan
    • [PATCH V6 1/5] LIB: Indirect ISA/LPC port IO introduced   Alexander Graf
• [PATCH 00/37] PCI: Support for configurable PCI endpoint   Kishon Vijay Abraham I
  • [PATCH 00/37] PCI: Support for configurable PCI endpoint   Bjorn Helgaas
    • [PATCH 00/37] PCI: Support for configurable PCI endpoint   Kishon Vijay Abraham I
• [PATCH v31 00/12] add kdump support   AKASHI Takahiro
  • [PATCH v31 01/12] memblock: add memblock_cap_memory_range()   AKASHI Takahiro
  • [PATCH v31 02/12] arm64: limit memory regions based on DT property, usable-memory-range   AKASHI Takahiro
    • [PATCH v31 02/12] arm64: limit memory regions based on DT property, usable-memory-range   Mark Rutland
      • [PATCH v31 02/12] arm64: limit memory regions based on DT property, usable-memory-range   AKASHI Takahiro
  • [PATCH v31 03/12] arm64: kdump: reserve memory for crash dump kernel   AKASHI Takahiro
    • [PATCH v31 03/12] arm64: kdump: reserve memory for crash dump kernel   Mark Rutland
      • [PATCH v31 03/12] arm64: kdump: reserve memory for crash dump kernel   AKASHI Takahiro
      • [PATCH v31 03/12] arm64: kdump: reserve memory for crash dump kernel   Mark Rutland
      • [PATCH v31 03/12] arm64: kdump: reserve memory for crash dump kernel   AKASHI Takahiro
  • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   AKASHI Takahiro
    • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   Mark Rutland
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   AKASHI Takahiro
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   Mark Rutland
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   AKASHI Takahiro
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   Mark Rutland
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   AKASHI Takahiro
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   AKASHI Takahiro
      • [PATCH v31 04/12] arm64: mm: allow for unmapping part of kernel mapping   Mark Rutland
  • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
    • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   James Morse
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
      • [PATCH v31 05/12] arm64: kdump: protect crash dump kernel memory   Mark Rutland
  • [PATCH v31 06/12] arm64: hibernate: preserve kdump image around hibernation   AKASHI Takahiro
  • [PATCH v31 07/12] arm64: kdump: implement machine_crash_shutdown()   AKASHI Takahiro
  • [PATCH v31 08/12] arm64: kdump: add VMCOREINFO's for user-space tools   AKASHI Takahiro
  • [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file   AKASHI Takahiro
    • [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file   Mark Rutland
      • [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file   AKASHI Takahiro
      • [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file   Mark Rutland
      • [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file   Mark Rutland
      • [PATCH v31 09/12] arm64: kdump: provide /proc/vmcore file   AKASHI Takahiro
  • [PATCH v31 10/12] arm64: kdump: enable kdump in defconfig   AKASHI Takahiro
  • [PATCH v31 11/12] Documentation: kdump: describe arm64 port   AKASHI Takahiro
  • [PATCH v31 12/12] Documentation: dt: chosen properties for arm64 kdump   AKASHI Takahiro
• [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Arnd Bergmann
  • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Arnd Bergmann
  • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Robin Murphy
    • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Scott Wood
    • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Roy Pledge
      • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Russell King - ARM Linux
      • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Roy Pledge
      • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Robin Murphy
      • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Roy Pledge
  • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Russell King - ARM Linux
    • [PATCH 06/10] soc/qbman: Add ARM equivalent for flush_dcache_range()   Roy Pledge
• [PATCH 2/3] pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions   Linus Walleij
  • [PATCH 2/3] pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions   Krzysztof Kozlowski
• [PATCH] PCI: ACPI: Fix ThunderX PEM initialization   Vadim Lomovtsev
  • [PATCH] PCI: ACPI: Fix ThunderX PEM initialization   Bjorn Helgaas
    • [PATCH] PCI: ACPI: Fix ThunderX PEM initialization   Vadim Lomovtsev
• [PATCH] dmaengine: pl330: Fix race in residue reporting   Sjoerd Simons
• [PATCH] MAINTAINERS: Add include/dt-bindings/mfd to MFD entry   Lee Jones
  • [PATCH] MAINTAINERS: Add include/dt-bindings/mfd to MFD entry   Greg KH
    • [PATCH] MAINTAINERS: Add include/dt-bindings/mfd to MFD entry   Lee Jones
      • [PATCH] MAINTAINERS: Add include/dt-bindings/mfd to MFD entry   Greg KH
  • [STLinux Kernel] [PATCH] MAINTAINERS: Add include/dt-bindings/mfd to MFD entry   Peter Griffin
• arch: arm: bpf: Converting cBPF to eBPF for arm 32 bit   Shubham Bansal
  • arch: arm: bpf: Converting cBPF to eBPF for arm 32 bit   Shubham Bansal
    • arch: arm: bpf: Converting cBPF to eBPF for arm 32 bit   nick viljoen
  • arch: arm: bpf: Converting cBPF to eBPF for arm 32 bit   Shubham Bansal
  • arch: arm: bpf: Converting cBPF to eBPF for arm 32 bit   Kees Cook
• [Resend PATCH v2 0/3] STM32F4 Clock binding fix & update   gabriel.fernandez at st.com
  • [Resend PATCH v2 1/3] dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro   gabriel.fernandez at st.com
    • [Resend PATCH v2 1/3] dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro   Lee Jones
  • [Resend PATCH v2 2/3] dt-bindings: mfd: stm32f4: Add missing binding definition   gabriel.fernandez at st.com
    • [Resend PATCH v2 2/3] dt-bindings: mfd: stm32f4: Add missing binding definition   Lee Jones
      • [Resend PATCH v2 2/3] dt-bindings: mfd: stm32f4: Add missing binding definition   Gabriel Fernandez
    • [Resend PATCH v2 2/3] dt-bindings: mfd: stm32f4: Add missing binding definition   Lee Jones
  • [Resend PATCH v2 3/3] ARM: dts: stm32: Use clock DT binding definition on stm32f429 family   gabriel.fernandez at st.com
• [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ard Biesheuvel
  • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Leif Lindholm
    • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ard Biesheuvel
  • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Mark Rutland
  • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Riku Voipio
• [PATCH v2 5/8] mfd: exynos-lpass: Remove pad retention control   Rob Herring
  • [PATCH v2 5/8] mfd: exynos-lpass: Remove pad retention control   Lee Jones
• [PATCH v2 6/8] mfd: exynos-lpass: Add support for clocks   Rob Herring
  • [PATCH v2 6/8] mfd: exynos-lpass: Add support for clocks   Lee Jones
• [PATCH v4 1/3] dt-bindings: Document Broadcom iProc mailbox controller driver   Rob Herring
• [PATCH 1/5] DT: mfd: axp20x: Add AXP806 to list of current AXP20x family members   Rob Herring
• [PATCH 2/5] DT: mfd: axp20x: Add binding for the AXP808   Rob Herring
  • [PATCH 2/5] DT: mfd: axp20x: Add binding for the AXP808   Chen-Yu Tsai
• [PATCH 1/2] ARM: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>   Masahiro Yamada
• [PATCH 2/2] ARM: cache-uniphier: clean up active way setup code   Masahiro Yamada
• [PATCH v2] ARM: dts: imx: Pass 'chosen' and 'memory' nodes   Stefan Wahren
  • [PATCH v2] ARM: dts: imx: Pass 'chosen' and 'memory' nodes   Stefan Wahren
    • [PATCH v2] ARM: dts: imx: Pass 'chosen' and 'memory' nodes   Fabio Estevam
      • [PATCH v2] ARM: dts: imx: Pass 'chosen' and 'memory' nodes   Arnd Bergmann
• [PATCH 2/2] arm64/dma-mapping: validate dma_masks against IORT defined limits   Robin Murphy
  • [PATCH 2/2] arm64/dma-mapping: validate dma_masks against IORT defined limits   Lorenzo Pieralisi
    • [PATCH 2/2] arm64/dma-mapping: validate dma_masks against IORT defined limits   Robin Murphy
      • [PATCH 2/2] arm64/dma-mapping: validate dma_masks against IORT defined limits   Arnd Bergmann
      • [PATCH 2/2] arm64/dma-mapping: validate dma_masks against IORT defined limits   Robin Murphy
• [PATCH/RFC] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Magnus Damm
  • [PATCH/RFC] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Robin Murphy
    • [PATCH/RFC] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Simon Horman
    • [PATCH/RFC] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Geert Uytterhoeven
  • [PATCH/RFC] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Geert Uytterhoeven
• [PATCH v3] initramfs: finish fput() before accessing any binary from initramfs   Lokesh Vutla
  • [PATCH v3] initramfs: finish fput() before accessing any binary from initramfs   Andrew Morton
    • [PATCH v3] initramfs: finish fput() before accessing any binary from initramfs   Tero Kristo
• [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line   Lee Jones
  • [PATCH v2 01/10] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled   Lee Jones
  • [PATCH v2 02/10] serial: st-asc: Provide RTS functionality   Lee Jones
  • [PATCH v2 03/10] serial: st-asc: Read in all Pinctrl states   Lee Jones
    • [STLinux Kernel] [PATCH v2 03/10] serial: st-asc: Read in all Pinctrl states   Peter Griffin
  • [PATCH v2 04/10] serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles   Lee Jones
  • [PATCH v2 05/10] serial: st-asc: Use generic DT binding for announcing RTS/CTS lines   Lee Jones
    • [STLinux Kernel] [PATCH v2 05/10] serial: st-asc: Use generic DT binding for announcing RTS/CTS lines   Peter Griffin
  • [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description   Lee Jones
    • [STLinux Kernel] [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description   Peter Griffin
    • [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description   Rob Herring
  • [PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line   Lee Jones
    • [STLinux Kernel] [PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line   Peter Griffin
  • [PATCH v2 08/10] ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control   Lee Jones
  • [PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups   Lee Jones
    • [STLinux Kernel] [PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups   Peter Griffin
  • [PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control   Lee Jones
    • [STLinux Kernel] [PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control   Peter Griffin
  • [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line   Lee Jones
    • [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line   Greg KH
      • [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line   Lee Jones
  • [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line   Greg KH
    • [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line   Lee Jones
• [PATCH] pwm: atmel-hlcdc: Convert to the atomic PWM API   Boris Brezillon
  • [PATCH] pwm: atmel-hlcdc: Convert to the atomic PWM API   Nicolas Ferre
• [PATCH 2/8] pinctrl: stm32: use gpio-ranges to declare bank range   Linus Walleij
• [PATCH 3/8] Documentation: dt: Add bindings for STM32 pinctrl   Rob Herring
  • [PATCH 3/8] Documentation: dt: Add bindings for STM32 pinctrl   Linus Walleij
• [PATCH 6/8] Documentation: dt: Add new compatible to STM32 pinctrl driver bindings   Rob Herring
  • [PATCH 6/8] Documentation: dt: Add new compatible to STM32 pinctrl driver bindings   Alexandre Torgue
    • [PATCH 6/8] Documentation: dt: Add new compatible to STM32 pinctrl driver bindings   Linus Walleij
      • [PATCH 6/8] Documentation: dt: Add new compatible to STM32 pinctrl driver bindings   Alexandre Torgue
• [PATCH 0/8] ADD STM32H743 MCU and STM32H743i-Eval board supports   Linus Walleij
  • [PATCH 0/8] ADD STM32H743 MCU and STM32H743i-Eval board supports   Alexandre Torgue
• [PATCH] crypto: arm64/crc32 - merge CRC32 and PMULL instruction based drivers   Ard Biesheuvel
  • [PATCH] crypto: arm64/crc32 - merge CRC32 and PMULL instruction based drivers   Matthias Brugger
  • [PATCH] crypto: arm64/crc32 - merge CRC32 and PMULL instruction based drivers   Herbert Xu
• [PATCH RESEND 4/5] mtd: nand: atmel: Document the new DT bindings   Rob Herring
  • [PATCH RESEND 4/5] mtd: nand: atmel: Document the new DT bindings   Boris Brezillon
    • [PATCH RESEND 4/5] mtd: nand: atmel: Document the new DT bindings   Boris Brezillon
      • [PATCH RESEND 4/5] mtd: nand: atmel: Document the new DT bindings   Rob Herring
      • [PATCH RESEND 4/5] mtd: nand: atmel: Document the new DT bindings   Boris Brezillon
  • [PATCH RESEND 4/5] mtd: nand: atmel: Document the new DT bindings   Nicolas Ferre
• [PATCH v2 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Rob Herring
  • [PATCH v2 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Lucas Stach
    • [PATCH v2 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Shawn Guo
      • [PATCH v2 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Lucas Stach
      • [PATCH v2 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Shawn Guo
      • [PATCH v2 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Lucas Stach
• [PATCH v2 2/3] arm64: kvm: reuse existing cache type/info related macros   Marc Zyngier
  • [PATCH v2 2/3] arm64: kvm: reuse existing cache type/info related macros   Christoffer Dall
• [PATCH 1/4] Documentation/devicetree/bindings/video/bridge: megachips-stdpxxxx-ge-b850v3-fw   Rob Herring
• [RFC] ARM: l2c: Adding L310_AUX_CTRL_FULL_LINE_ZERO broke my system   Chris Brandt
  • [RFC] ARM: l2c: Adding L310_AUX_CTRL_FULL_LINE_ZERO broke my system   Russell King - ARM Linux
    • [RFC] ARM: l2c: Adding L310_AUX_CTRL_FULL_LINE_ZERO broke my system   Chris Brandt
• [PATCH v2 3/4] soc/imx: add new GPC driver   Andrey Smirnov
• [PATCH] pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function   Chen-Yu Tsai
  • [PATCH] pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function   Maxime Ripard
  • [PATCH] pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function   Linus Walleij
• [PATCH v2 3/3] arm64: kvm: add support for the extended 64bit ccsidr   Marc Zyngier
  • [PATCH v2 3/3] arm64: kvm: add support for the extended 64bit ccsidr   Sudeep Holla
• [PATCH 1/3 v2] watchdog: add DT bindings for Cortina Gemini   Rob Herring
• [PATCH] staging: bcm2835-v4l: remove incorrect include path   Arnd Bergmann
• [PATCH] pinctrl: samsung: mark PM functions as __maybe_unused   Arnd Bergmann
  • [PATCH] pinctrl: samsung: mark PM functions as __maybe_unused   Marek Szyprowski
  • [PATCH] pinctrl: samsung: mark PM functions as __maybe_unused   Linus Walleij
• [PATCH] staging: bcm2835-audio: remove incorrect include path   Arnd Bergmann
• [PATCH 04/10] arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2   Marc Zyngier
  • [PATCH 04/10] arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2   Mark Rutland
• [PATCH] staging: bcm2835-audio: fix empty-body warning   Arnd Bergmann
• [PATCH 0/2] pinctrl: sunxi: Merge A31s pinctrl driver with A31   Chen-Yu Tsai
  • [PATCH 1/2] pinctrl: sunxi: Support A31/A31s with pinctrl variants   Chen-Yu Tsai
    • [PATCH 1/2] pinctrl: sunxi: Support A31/A31s with pinctrl variants   Linus Walleij
  • [PATCH 2/2] pinctrl: sunxi: Remove redundant A31s pinctrl driver   Chen-Yu Tsai
    • [PATCH 2/2] pinctrl: sunxi: Remove redundant A31s pinctrl driver   Linus Walleij
  • [PATCH 0/2] pinctrl: sunxi: Merge A31s pinctrl driver with A31   Maxime Ripard
    • [PATCH 0/2] pinctrl: sunxi: Merge A31s pinctrl driver with A31   Linus Walleij
      • [PATCH 0/2] pinctrl: sunxi: Merge A31s pinctrl driver with A31   Maxime Ripard
      • [PATCH 0/2] pinctrl: sunxi: Merge A31s pinctrl driver with A31   Linus Walleij
• [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Christopher Covington
  • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Will Deacon
    • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Catalin Marinas
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Will Deacon
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Catalin Marinas
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Catalin Marinas
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Will Deacon
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Catalin Marinas
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Will Deacon
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Catalin Marinas
      • [PATCH v4 2/4] arm64: Work around Falkor erratum 1003   Christopher Covington
• [PATCH 03/10] arm64: KVM: Save/restore the host SPE state when entering/leaving a VM   Marc Zyngier
  • [PATCH 03/10] arm64: KVM: Save/restore the host SPE state when entering/leaving a VM   Will Deacon
    • [PATCH 03/10] arm64: KVM: Save/restore the host SPE state when entering/leaving a VM   Marc Zyngier
• [PATCH 3/5] Documentation: dt: iio: document stm32 exti trigger   Rob Herring
  • [PATCH 3/5] Documentation: dt: iio: document stm32 exti trigger   Fabrice Gasnier
    • [PATCH 3/5] Documentation: dt: iio: document stm32 exti trigger   Rob Herring
      • [PATCH 3/5] Documentation: dt: iio: document stm32 exti trigger   Fabrice Gasnier
  • [PATCH 3/5] Documentation: dt: iio: document stm32 exti trigger   Linus Walleij
• [PATCH] mfd: stm32-timers: fix driver removal   Fabrice Gasnier
  • [PATCH] mfd: stm32-timers: fix driver removal   Benjamin Gaignard
  • [PATCH] mfd: stm32-timers: fix driver removal   Lee Jones
• [PATCH] usb: gadget: udc: atmel: fix debug output   Arnd Bergmann
  • [PATCH] usb: gadget: udc: atmel: fix debug output   Alexandre Belloni
    • [PATCH] usb: gadget: udc: atmel: fix debug output   Nicolas Ferre
• [PATCH v8 01/16] FDT: introduce global phandle allocation   André Przywara
  • [PATCH v8 01/16] FDT: introduce global phandle allocation   Marc Zyngier
    • [PATCH v8 01/16] FDT: introduce global phandle allocation   Andre Przywara
• [PATCH v2] PCI: Add information about describing PCI in ACPI   Bjorn Helgaas
• [PATCH v3 01/18] drivers/fsi: Add empty fsi bus definitions   Christopher Bostic
  • [PATCH v3 01/18] drivers/fsi: Add empty fsi bus definitions   Geert Uytterhoeven
    • [PATCH v3 01/18] drivers/fsi: Add empty fsi bus definitions   Jeremy Kerr
• [PATCH v3 02/18] drivers/fsi: Add device & driver definitions   Christopher Bostic
• [PATCH v3 03/18] drivers/fsi: add driver to device matches   Christopher Bostic
• [PATCH v3 04/18] drivers/fsi: Add fsi master definition   Christopher Bostic
  • [PATCH v3 04/18] drivers/fsi: Add fsi master definition   Greg KH
• [PATCH v3 05/18] drivers/fsi: Add slave definition   Christopher Bostic
• [PATCH v3 07/18] drivers/fsi: Add FSI crc calculators to library   Christopher Bostic
• [PATCH v3 08/18] drivers/fsi: Kick off master scan via sysfs   Christopher Bostic
• [PATCH v3 09/18] drivers/fsi: Implement slave initialisation   Christopher Bostic
• [PATCH v3 10/18] drivers/fsi: scan slaves & register devices   Christopher Bostic
• [PATCH v3 12/18] drivers/fsi: Set up links for slave communication   Christopher Bostic
• [PATCH v3 13/18] drivers/fsi: Set slave SMODE to init communication   Christopher Bostic
• [PATCH v3 14/18] drivers/fsi: Remove all scanned devices during master unregister   Christopher Bostic
• [PATCH v3 15/18] drivers/fsi: Add FSI bus documentation   Christopher Bostic
  • [PATCH v3 15/18] drivers/fsi: Add FSI bus documentation   Rob Herring
• [PATCH v3 16/18] drivers/fsi: Add documentation for GPIO based FSI master   Christopher Bostic
  • [PATCH v3 16/18] drivers/fsi: Add documentation for GPIO based FSI master   Rob Herring
• [PATCH v3 17/18] drivers/fsi: Document FSI master sysfs files in ABI   Christopher Bostic
• [PATCH v3 18/18] drivers/fsi: Add GPIO based FSI master   Christopher Bostic
• [PATCH v2 0/3] i.MX7 PCI support   Andrey Smirnov
  • [PATCH v2 1/3] PCI: imx6: Fix a typo in error message   Andrey Smirnov
  • [PATCH v2 2/3] PCI: imx6: Allow probe deferal by reset GPIO   Andrey Smirnov
    • [PATCH v2 2/3] PCI: imx6: Allow probe deferal by reset GPIO   Lucas Stach
  • [PATCH v2 3/3] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
    • [PATCH v2 3/3] PCI: imx6: Add code to support i.MX7D   Lucas Stach
      • [PATCH v2 3/3] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
• [PATCH 1/2] watchdog: sama5d4: Cache MR instead of a partial config   Alexandre Belloni
  • [PATCH 1/2] watchdog: sama5d4: Cache MR instead of a partial config   Guenter Roeck
• Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Laura Abbott
  • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
    • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Joe Perches
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Joe Perches
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Joe Perches
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Peter Zijlstra
    • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Laura Abbott
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Laura Abbott
      • Build failure with v4.9-rc1 and GCC trunk -- compiler weirdness   Ard Biesheuvel
• [PATCH v3 00/18] FSI device driver introduction   Christopher Bostic
  • [PATCH v3 00/18] FSI device driver introduction   Christopher Bostic
    • [PATCH v3 06/18] drivers/fsi: Add empty master scan   Christopher Bostic
    • [PATCH v3 11/18] drivers/fsi: Add device read/write/peek functions   Christopher Bostic
• [PATCH v4 3/4] arm64: Use __tlbi() macros in KVM code   Punit Agrawal
  • [PATCH v4 3/4] arm64: Use __tlbi() macros in KVM code   Will Deacon
    • [PATCH v4 3/4] arm64: Use __tlbi() macros in KVM code   Punit Agrawal
• [PATCH v2 15/18] drivers/fsi: Add documentation for GPIO based FSI master   Christopher Bostic
  • [PATCH v2 15/18] drivers/fsi: Add documentation for GPIO based FSI master   Christopher Bostic
• [PATCH 1/4] power: reset: Add Gemini poweroff DT bindings   Rob Herring
• [PATCH V8 00/10] Add UEFI 2.6 and ACPI 6.1 updates for RAS on ARM64   Tyler Baicar
  • [PATCH V8 02/10] ras: acpi/apei: cper: generic error data entry v3 per ACPI 6.1   Tyler Baicar
  • [PATCH V8 03/10] efi: parse ARM processor error   Tyler Baicar
  • [PATCH V8 04/10] arm64: exception: handle Synchronous External Abort   Tyler Baicar
    • [PATCH V8 04/10] arm64: exception: handle Synchronous External Abort   James Morse
      • [PATCH V8 04/10] arm64: exception: handle Synchronous External Abort   Baicar, Tyler
  • [PATCH V8 05/10] acpi: apei: handle SEA notification type for ARMv8   Tyler Baicar
    • [PATCH V8 05/10] acpi: apei: handle SEA notification type for ARMv8   kbuild test robot
    • [PATCH V8 05/10] acpi: apei: handle SEA notification type for ARMv8   James Morse
      • [PATCH V8 05/10] acpi: apei: handle SEA notification type for ARMv8   Baicar, Tyler
    • [PATCH V8 05/10] acpi: apei: handle SEA notification type for ARMv8   Zhengqiang
      • [PATCH V8 05/10] acpi: apei: handle SEA notification type for ARMv8   Baicar, Tyler
  • [PATCH V8 06/10] acpi: apei: panic OS with fatal error status block   Tyler Baicar
    • [PATCH V8 06/10] acpi: apei: panic OS with fatal error status block   James Morse
      • [PATCH V8 06/10] acpi: apei: panic OS with fatal error status block   Baicar, Tyler
      • [PATCH V8 06/10] acpi: apei: panic OS with fatal error status block   James Morse
      • [PATCH V8 06/10] acpi: apei: panic OS with fatal error status block   Baicar, Tyler
  • [PATCH V8 07/10] efi: print unrecognized CPER section   Tyler Baicar
  • [PATCH V8 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Tyler Baicar
    • [PATCH V8 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   kbuild test robot
    • [PATCH V8 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Steven Rostedt
      • [PATCH V8 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Baicar, Tyler
      • [PATCH V8 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Steven Rostedt
      • [PATCH V8 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Baicar, Tyler
  • [PATCH V8 09/10] trace, ras: add ARM processor error trace event   Tyler Baicar
    • [PATCH V8 09/10] trace, ras: add ARM processor error trace event   kbuild test robot
    • [PATCH V8 09/10] trace, ras: add ARM processor error trace event   Steven Rostedt
      • [PATCH V8 09/10] trace, ras: add ARM processor error trace event   Baicar, Tyler
  • [PATCH V8 10/10] arm/arm64: KVM: add guest SEA support   Tyler Baicar
• [PATCH V8 01/10] acpi: apei: read ack upon ghes record consumption   Tyler Baicar
• [PATCH v3 5/9] Documentation: DT: add entries for I2SE boards   Rob Herring
  • [PATCH v3 5/9] Documentation: DT: add entries for I2SE boards   Michael Heimpold
    • [PATCH v3 5/9] Documentation: DT: add entries for I2SE boards   Rob Herring
• [PATCH v3 13/24] drm/rockchip: dw-mipi-dsi: fix escape clock rate   John Keeping
• [Patch v6 0/2] Support ARM SMCC SoC vendor quirks   Andy Gross
  • [Patch v6 1/2] arm: kernel: Add SMC structure parameter   Andy Gross
  • [Patch v6 2/2] firmware: qcom: scm: Fix interrupted SCM calls   Andy Gross
• [PATCH v3 5/8] ASoC: codecs: Add sun8i-a33 binding documentation   Rob Herring
• [PATCH 3/8] Documentation: dt-bindings: Add STM32 pinctrl driver DT bindings   Rob Herring
  • [PATCH 3/8] Documentation: dt-bindings: Add STM32 pinctrl driver DT bindings   Rob Herring
  • [PATCH 3/8] Documentation: dt-bindings: Add STM32 pinctrl driver DT bindings   Linus Walleij
• [PATCH 0/9] irqchip/gic-v3-its: Implement ITS nodes as kernel devices and use CMA   Robert Richter
  • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Robert Richter
    • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Marc Zyngier
      • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Robert Richter
      • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Shanker Donthineni
      • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Robert Richter
      • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Marc Zyngier
      • [PATCH 1/9] irqchip/gic-v3-its: Fix command buffer allocation   Marc Zyngier
  • [PATCH 4/9] irqchip/gic-v3-its: Split probing from its node initialization   Robert Richter
  • [PATCH 5/9] irqchip/gic-v3-its: Decouple its initialization from gic   Robert Richter
• [PATCH 2/9] irqchip/gic-v3-its: Initialize its nodes in probe order   Robert Richter
• [PATCH 3/9] irqchip/gic-v3-its: Initialize MSIs with subsys_initcalls   Robert Richter
• [PATCH 6/9] irqchip/gic-v3-its: Prevent its init ordering dependencies   Robert Richter
• [PATCH 7/9] irqchip/gic-v3-its: Initialize its nodes later   Robert Richter
• [PATCH 8/9] irqchip/gic-v3-its: Handle its nodes as kernel devices   Robert Richter
• [PATCH 9/9] irqchip, gicv3-its, cma: Use CMA for allocation of large device tables   Robert Richter
• [GIT PULL] STM32 DT changes for v4.11 #2   Alexandre Torgue
  • [GIT PULL] STM32 DT changes for v4.11 #2   Arnd Bergmann
• [RFC v3 00/10] Provide the EL1 physical timer to the VM   Jintack Lim
  • [RFC v3 01/10] KVM: arm/arm64: Abstract virtual timer context into separate structure   Jintack Lim
  • [RFC v3 02/10] KVM: arm/arm64: Move cntvoff to each timer context   Jintack Lim
    • [RFC v3 02/10] KVM: arm/arm64: Move cntvoff to each timer context   Christoffer Dall
  • [RFC v3 03/10] KVM: arm/arm64: Decouple kvm timer functions from virtual timer   Jintack Lim
    • [RFC v3 03/10] KVM: arm/arm64: Decouple kvm timer functions from virtual timer   Christoffer Dall
  • [RFC v3 04/10] KVM: arm/arm64: Add the EL1 physical timer context   Jintack Lim
    • [RFC v3 04/10] KVM: arm/arm64: Add the EL1 physical timer context   Christoffer Dall
  • [RFC v3 05/10] KVM: arm/arm64: Initialize the emulated EL1 physical timer   Jintack Lim
    • [RFC v3 05/10] KVM: arm/arm64: Initialize the emulated EL1 physical timer   Christoffer Dall
  • [RFC v3 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Jintack Lim
    • [RFC v3 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Christoffer Dall
  • [RFC v3 07/10] KVM: arm/arm64: Set a background timer to the earliest timer expiration   Jintack Lim
    • [RFC v3 07/10] KVM: arm/arm64: Set a background timer to the earliest timer expiration   Christoffer Dall
  • [RFC v3 08/10] KVM: arm/arm64: Set up a background timer for the physical timer emulation   Jintack Lim
    • [RFC v3 08/10] KVM: arm/arm64: Set up a background timer for the physical timer emulation   Christoffer Dall
  • [RFC v3 09/10] KVM: arm64: Add the EL1 physical timer access handler   Jintack Lim
    • [RFC v3 09/10] KVM: arm64: Add the EL1 physical timer access handler   Christoffer Dall
  • [RFC v3 10/10] KVM: arm/arm64: Emulate the EL1 phys timer registers   Jintack Lim
    • [RFC v3 10/10] KVM: arm/arm64: Emulate the EL1 phys timer registers   Christoffer Dall
  • [RFC v3 00/10] Provide the EL1 physical timer to the VM   Christoffer Dall
    • [RFC v3 00/10] Provide the EL1 physical timer to the VM   Jintack Lim
      • [RFC v3 00/10] Provide the EL1 physical timer to the VM   Christoffer Dall
      • [RFC v3 00/10] Provide the EL1 physical timer to the VM   Christoffer Dall
      • [RFC v3 00/10] Provide the EL1 physical timer to the VM   Jintack Lim
      • [RFC v3 00/10] Provide the EL1 physical timer to the VM   Christoffer Dall
• [GIT PULL] EFI urgent fix for v4.10   Ard Biesheuvel
  • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ard Biesheuvel
    • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Leif Lindholm
    • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ingo Molnar
      • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ard Biesheuvel
      • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ingo Molnar
    • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Jeffrey Hugo
      • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Jeffrey Hugo
      • [PATCH] efi: fdt: avoid FDT manipulation after ExitBootServices()   Ard Biesheuvel
• [PATCH] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported   Rob Herring
  • [PATCH] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported   Andreas Färber
• [RFC PATCH 1/5] regulator: Extend the power-management APIs   Mark Brown
  • [RFC PATCH 1/5] regulator: Extend the power-management APIs   Boris Brezillon
• [PATCH] iommu/dma: Remove bogus dma_supported() implementation   Robin Murphy
  • [PATCH] iommu/dma: Remove bogus dma_supported() implementation   Joerg Roedel
• [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function   Sean Paul
  • [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function   Chris Zhong
    • [PATCH v3 3/5] drm/rockchip/dsi: remove mode_valid function   Mark yao
• [PATCH 1/2] ARM: dts: add XOADC and IIO HWMON to MSM8660/APQ8060   Bjorn Andersson
• [PATCH 2/2] ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor   Bjorn Andersson
  • [PATCH 2/2] ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor   Linus Walleij
    • [PATCH 2/2] ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor   Bjorn Andersson
      • [PATCH 2/2] ARM: dts: Qualcomm APQ8060 DragonBoard ALS sensor   Linus Walleij
• [PATCH v3 18/24] media: imx: Add SMFC subdev driver   Russell King - ARM Linux
  • [PATCH v3 18/24] media: imx: Add SMFC subdev driver   Steve Longerbeam
• [PATCH v4 2/6] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Sean Paul
• [PATCH v4 3/6] drm/rockchip/dsi: dw-mipi: correct the coding style   Sean Paul
• [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Lorenzo Pieralisi
  • [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Sinan Kaya
  • [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Nate Watterson
    • [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Hanjun Guo
    • [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Sricharan
• [PATCH 12/22 v2] ARM: dts: add top-level DT bindings for Cortina Gemini   Linus Walleij
  • [PATCH 12/22 v2] ARM: dts: add top-level DT bindings for Cortina Gemini   Alexandre Belloni
  • [PATCH 12/22 v2] ARM: dts: add top-level DT bindings for Cortina Gemini   Rob Herring
• [PATCH v5 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Markus Mayer
  • [PATCH v5 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Stephen Boyd
    • [PATCH v5 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Florian Fainelli
      • [PATCH v5 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Stephen Boyd
      • [PATCH v5 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Florian Fainelli
      • [PATCH v5 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Stephen Boyd
• [PATCH] MAINTAINERS: extend Raspberry Pi entry   Eric Anholt
• [PATCH 4/6] bus: add driver for the Technologic Systems NBUS   Sebastien Bourdelin
  • [PATCH 4/6] bus: add driver for the Technologic Systems NBUS   Linus Walleij
    • [PATCH 4/6] bus: add driver for the Technologic Systems NBUS   Sebastien Bourdelin
• [PATCH v8] perf: add qcom l2 cache perf events driver   Leeder, Neil
  • [PATCH v8] perf: add qcom l2 cache perf events driver   Mark Rutland
• [PATCH 0/2] [media] exynos-gsc: Fix support for NV21 and NV61 formats   Javier Martinez Canillas
  • [PATCH 2/2] [media] exynos-gsc: Add support for NV{16, 21, 61}M pixel formats   Javier Martinez Canillas
    • [PATCH 2/2] [media] exynos-gsc: Add support for NV{16,21,61}M pixel formats   Sylwester Nawrocki
  • [PATCH 0/2] [media] exynos-gsc: Fix support for NV21 and NV61 formats   Javier Martinez Canillas
    • [PATCH 0/2] [media] exynos-gsc: Fix support for NV21 and NV61 formats   Sylwester Nawrocki
      • [PATCH 0/2] [media] exynos-gsc: Fix support for NV21 and NV61 formats   Javier Martinez Canillas
• [PATCH 1/2] [media] exynos-gsc: Do not swap cb/cr for semi planar formats   Javier Martinez Canillas
  • [PATCH 1/2] [media] exynos-gsc: Do not swap cb/cr for semi planar formats   Sylwester Nawrocki
• irq_work_run called from armv8pmu_handle_irq   Sodagudi Prasad
  • irq_work_run called from armv8pmu_handle_irq   Will Deacon
• [PATCH] [linux-next] arm64: defconfig: resynchronize the defconfig   Timur Tabi
• [PATCH] arm64: kconfig: allow support for memory failure handling   Tyler Baicar
  • [PATCH] arm64: kconfig: allow support for memory failure handling   Punit Agrawal
    • [PATCH] arm64: kconfig: allow support for memory failure handling   Baicar, Tyler
      • [PATCH] arm64: kconfig: allow support for memory failure handling   Punit Agrawal
• [PATCH v2 2/4] net: phy: Initialize mdio clock at probe function   Florian Fainelli
• [PATCH v2] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported   Martin Blumenstingl
  • [PATCH v2] Documentation: devicetree: meson-ir: "linux,rc-map-name" is supported   Martin Blumenstingl
    • [PATCH v2] Documentation: devicetree: meson-ir: "linux,rc-map-name" is supported   Sean Young
    • [PATCH v2] Documentation: devicetree: meson-ir: "linux,rc-map-name" is supported   Andreas Färber
• [PATCH] MAINTAINERS: Update for the current location of the bcm2835 tree.   Florian Fainelli
• [PATCH] arm64: hwpoison: add VM_FAULT_HWPOISON[_LARGE] handling   Tyler Baicar
  • [PATCH] arm64: hwpoison: add VM_FAULT_HWPOISON[_LARGE] handling   Punit Agrawal
    • [PATCH] arm64: hwpoison: add VM_FAULT_HWPOISON[_LARGE] handling   Punit Agrawal
• [PATCH v2] ARM: dts: i.MX25: add AIPS control registers   Martin Kaiser
  • [PATCH v2] ARM: dts: i.MX25: add AIPS control registers   Sascha Hauer
• [PATCH] arm64: make use of for_each_node_by_type()   Dmitry Torokhov
• [PATCH v6 0/2] cpufreq: brcmstb-cpufreq: CPUfreq driver for older Broadcom STB SoCs   Markus Mayer
  • [PATCH v6 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Markus Mayer
    • [PATCH v6 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Rob Herring
      • [PATCH v6 1/2] dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div   Markus Mayer
  • [PATCH v6 2/2] cpufreq: brcmstb-cpufreq: CPUfreq driver for older Broadcom STB SoCs   Markus Mayer
• [PATCH] ASoC: bcm2835: Increase channels_max to 8   Matt Flax
  • [PATCH] ASoC: bcm2835: Increase channels_max to 8   Mark Brown
    • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Florian Kauer
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Mark Brown
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Mark Brown
      • [alsa-devel] [PATCH] ASoC: bcm2835: Increase channels_max to 8   Matt Flax
• [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Russell King - ARM Linux
  • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
  • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
    • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Russell King - ARM Linux
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
      • [PATCH v3 21/24] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
• [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Petr Cvek
  • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Andrew F. Davis
    • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Petr Cvek
      • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Guenter Roeck
      • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Petr Cvek
      • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Guenter Roeck
      • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Petr Cvek
      • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Guenter Roeck
      • [RFC] w1: regression, remove need for ida and use PLATFORM_DEVID_AUTO   Andrew F. Davis
• [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Florian Fainelli
  • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Florian Fainelli
    • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Arnd Bergmann
      • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Florian Fainelli
      • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Arnd Bergmann
      • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Eric Anholt
      • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Arnd Bergmann
      • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Florian Fainelli
      • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Eric Anholt
  • [GIT PULL 1/2] Broadcom dts changes for 4.11 (part 2)   Florian Fainelli
• [GIT PULL 2/2] Broadcom maintainers changes for 4.11   Florian Fainelli
  • [GIT PULL 2/2] Broadcom maintainers changes for 4.11   Arnd Bergmann
• [PATCH] [media] exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT   Shuah Khan
  • [PATCH] [media] exynos-gsc: Avoid spamming the log on VIDIOC_TRY_FMT   Javier Martinez Canillas
• [PATCH v3 3/3] reset: zx2967: add reset controller driver for ZTE's zx2967 family   Paul Gortmaker
• [PATCH v2 1/2] Documentation: mtk-quadspi: update DT bindings   Guochun Mao
• [PATCH V9] thermal: bcm2835: add thermal driver for bcm2835 soc   Eduardo Valentin
  • [PATCH V9] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
    • [PATCH V9] thermal: bcm2835: add thermal driver for bcm2835 soc   Eduardo Valentin
      • [PATCH V9] thermal: bcm2835: add thermal driver for bcm2835 soc   kernel at martin.sperl.org
  • [PATCH V9] thermal: bcm2835: add thermal driver for bcm2835 soc   Stefan Wahren
• [PATCH 0/6] Broadcom SBA RAID support   Anup Patel
  • [PATCH 1/6] mailbox: Add new API mbox_channel_device() for clients   Anup Patel
    • [PATCH 1/6] mailbox: Add new API mbox_channel_device() for clients   Jassi Brar
      • [PATCH 1/6] mailbox: Add new API mbox_channel_device() for clients   Anup Patel
  • [PATCH 2/6] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position   Anup Patel
  • [PATCH 3/6] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
    • [PATCH 3/6] async_tx: Handle DMA devices having support for fewer PQ coefficients   Dan Williams
      • [PATCH 3/6] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
      • [PATCH 3/6] async_tx: Handle DMA devices having support for fewer PQ coefficients   Dan Williams
      • [PATCH 3/6] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
  • [PATCH 4/6] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()   Anup Patel
  • [PATCH 5/6] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
    • [PATCH 5/6] dmaengine: Add Broadcom SBA RAID driver   Vinod Koul
      • [PATCH 5/6] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
      • [PATCH 5/6] dmaengine: Add Broadcom SBA RAID driver   Vinod Koul
      • [PATCH 5/6] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
  • [PATCH 6/6] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver   Anup Patel
• [PATCH v5 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Eduardo Valentin
• [PATCH v5 1/3] dt: bindings: add documentation for zx2967 family thermal sensor   Eduardo Valentin
• [PATCH v2 3/4] phy: Add USB3 PHY support for Broadcom NSP SoC   Rafał Miłecki
  • [PATCH v2 3/4] phy: Add USB3 PHY support for Broadcom NSP SoC   Jon Mason
• [PATCH 03/11] [media] s5p-mfc: Use min scratch buffer size   Andrzej Hajda
  • [PATCH 03/11] [media] s5p-mfc: Use min scratch buffer size   Smitha T Murthy
• [PATCH 3/5] mfd: axp20x: Add support for the AXP808 PMIC   Chen-Yu Tsai
  • [PATCH 3/5] mfd: axp20x: Add support for the AXP808 PMIC   Rask Ingemann Lambertsen
• [PATCH 4/5] regulator: axp20x: Add support for the AXP808 PMIC   Chen-Yu Tsai
• [PATCH 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Chen-Yu Tsai
  • [PATCH 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Rask Ingemann Lambertsen
• [RFC PATCH v2 4/4] crypto: aes - add generic time invariant AES for CTR/CCM/GCM   Eric Biggers
  • [RFC PATCH v2 4/4] crypto: aes - add generic time invariant AES for CTR/CCM/GCM   Ard Biesheuvel
    • [RFC PATCH v2 4/4] crypto: aes - add generic time invariant AES for CTR/CCM/GCM   Ard Biesheuvel
• [PATCH 09/33] Input: sun4i-lradc-keys - Drop unnecessary call to platform_set_drvdata and other changes   Chen-Yu Tsai
• [PATCH 05/11] [media] s5p-mfc: Add support for HEVC decoder   Andrzej Hajda
  • [PATCH 05/11] [media] s5p-mfc: Add support for HEVC decoder   Andrzej Hajda
    • [PATCH 05/11] [media] s5p-mfc: Add support for HEVC decoder   Smitha T Murthy
  • [PATCH 05/11] [media] s5p-mfc: Add support for HEVC decoder   Smitha T Murthy
• [PATCH 04/11] [media] s5p-mfc: Support MFCv10.10 buffer requirements   Andrzej Hajda
  • [PATCH 04/11] [media] s5p-mfc: Support MFCv10.10 buffer requirements   Smitha T Murthy
• [PATCH 06/11] [media] videodev2.h: Add v4l2 definition for HEVC   Andrzej Hajda
  • [PATCH 06/11] [media] videodev2.h: Add v4l2 definition for HEVC   Smitha T Murthy
• [PATCH 08/11] [media] s5p-mfc: Add VP9 decoder support   Andrzej Hajda
  • [PATCH 08/11] [media] s5p-mfc: Add VP9 decoder support   Smitha T Murthy
• [PATCH 09/11] [media] s5p-mfc: Add support for HEVC encoder   Andrzej Hajda
  • [PATCH 09/11] [media] s5p-mfc: Add support for HEVC encoder   Smitha T Murthy
• [PATCH v7 1/3] dt: bindings: add documentation for zx2967 family watchdog controller   Baoyou Xie
  • [PATCH v7 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Baoyou Xie
• [PATCH V2] Add devicetree for the Raspberry Pi 3, for arm (32)   Michael Zoran
  • [PATCH V2] Add devicetree for the Raspberry Pi 3, for arm (32)   Eric Anholt
• [PATCH v7 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Baoyou Xie
  • [PATCH v7 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Mathieu Poirier
• [PATCH v4 0/8] Add sun8i A33 audio driver   Mylène Josserand
  • [PATCH v4 5/8] ASoC: codecs: Add sun8i-a33 binding documentation   Mylène Josserand
    • Applied "ASoC: codecs: Add sun8i-a33 binding documentation" to the asoc tree   Mark Brown
  • [PATCH v4 6/8] ARM: dts: sun8i: Add audio codec, dai and card for A33   Mylène Josserand
    • [PATCH v4 6/8] ARM: dts: sun8i: Add audio codec, dai and card for A33   kbuild test robot
  • [PATCH v4 7/8] ARM: dts: sun8i: parrot: Enable audio nodes   Mylène Josserand
  • [PATCH v4 8/8] ARM: dts: sun8i: sinlinx: Enable audio nodes   Mylène Josserand
  • [PATCH v4 0/8] Add sun8i A33 audio driver   Maxime Ripard
• [PATCH v4 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31   Mylène Josserand
  • [PATCH v4 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31   Mylene Josserand
    • [PATCH v4 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31   Mark Brown
  • Applied "ASoC: sun4i-i2s: Update binding documentation to include A31" to the asoc tree   Mark Brown
• [PATCH v4 2/8] ASoC: sun4i-i2s: Add quirks to handle a31 compatible   Mylène Josserand
• [PATCH v4 3/8] ASoC: Add sun8i digital audio codec   Mylène Josserand
  • Applied "ASoC: Add sun8i digital audio codec" to the asoc tree   Mark Brown
  • [PATCH v4 3/8] ASoC: Add sun8i digital audio codec   Chen-Yu Tsai
    • [PATCH v4 3/8] ASoC: Add sun8i digital audio codec   Mylene Josserand
• [PATCH v4 4/8] ASoC: sun8i-codec-analog: Add amplifier event to fix first delay   Mylène Josserand
  • [PATCH v4 4/8] ASoC: sun8i-codec-analog: Add amplifier event to fix first delay   Chen-Yu Tsai
    • [PATCH v4 4/8] ASoC: sun8i-codec-analog: Add amplifier event to fix first delay   Mark Brown
• [PATCH 1 4/4] PCI: rcar: Use of_device_get_match_data() to simplify probe   Simon Horman
• [PATCH 0/2] drm: meson: Fixup driver and module name   Neil Armstrong
  • [PATCH 1/2] drm: meson: rename module name to meson-drm   Neil Armstrong
  • [PATCH 2/2] drm: meson: rename driver name to meson-drm   Neil Armstrong
    • [PATCH 2/2] drm: meson: rename driver name to meson-drm   Daniel Vetter
      • [PATCH 2/2] drm: meson: rename driver name to meson-drm   Neil Armstrong
      • [PATCH 2/2] drm: meson: rename driver name to meson-drm   Daniel Vetter
• [PATCH v3 22/24] media: imx: Add MIPI CSI-2 OV5640 sensor subdev driver   Laurent Pinchart
  • [PATCH v3 22/24] media: imx: Add MIPI CSI-2 OV5640 sensor subdev driver   Steve Longerbeam
• [PATCH] [media] staging: bcm2835: mark all symbols as 'static'   Arnd Bergmann
  • [PATCH] [media] staging: bcm2835: mark all symbols as 'static'   Arnd Bergmann
    • [PATCH] [media] staging: bcm2835: mark all symbols as 'static'   Arnd Bergmann
      • [PATCH] [media] staging: bcm2835: mark all symbols as 'static'   Greg Kroah-Hartman
      • [PATCH] [media] staging: bcm2835: mark all symbols as 'static'   Arnd Bergmann
• [PATCH] ARM: orion5x: fix Makefile for linkstation-lschl.dtb   Arnd Bergmann
  • [PATCH] ARM: orion5x: fix Makefile for linkstation-lschl.dtb   Roger Shimizu
  • [PATCH] ARM: orion5x: fix Makefile for linkstation-lschl.dtb   Gregory CLEMENT
    • [PATCH] ARM: orion5x: fix Makefile for linkstation-lschl.dtb   Arnd Bergmann
• [PATCH 1/2] crypto: arm64/aes - don't use IV buffer to return final keystream block   Ard Biesheuvel
  • [PATCH 2/2] crypto: arm/aes - don't use IV buffer to return final keystream block   Ard Biesheuvel
    • [PATCH 2/2] crypto: arm/aes - don't use IV buffer to return final keystream block   Herbert Xu
  • [PATCH 1/2] crypto: arm64/aes - don't use IV buffer to return final keystream block   Herbert Xu
• [PATCH] staging: bcm2835: don't mark 'bcm2835_v4l2_debug' as static   Arnd Bergmann
• [PATCH v3 1/3] nvmem: sunxi-sid: read NVMEM size from device compatible   Icenowy Zheng
  • [PATCH v3 2/3] nvmem: sunxi-sid: add support for H3's SID controller   Icenowy Zheng
    • [PATCH v3 2/3] nvmem: sunxi-sid: add support for H3's SID controller   Maxime Ripard
      • [PATCH v3 2/3] nvmem: sunxi-sid: add support for H3's SID controller   Icenowy Zheng
      • [PATCH v3 2/3] nvmem: sunxi-sid: add support for H3's SID controller   Maxime Ripard
      • [PATCH v3 2/3] nvmem: sunxi-sid: add support for H3's SID controller   Icenowy Zheng
      • [PATCH v3 2/3] nvmem: sunxi-sid: add support for H3's SID controller   Maxime Ripard
  • [PATCH v3 3/3] ARM: dts: sun8i: enable SID on Allwinner H3 SoC   Icenowy Zheng
  • [PATCH v3 1/3] nvmem: sunxi-sid: read NVMEM size from device compatible   Maxime Ripard
• [PATCH v3] arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU   Robin Murphy
  • [PATCH v3] arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU   Geert Uytterhoeven
• [GIT PULL 1/4] DaVinci driver updates   Sekhar Nori
  • [GIT PULL 1/4] DaVinci driver updates   Sekhar Nori
    • [GIT PULL 1/4] DaVinci driver updates   Sekhar Nori
      • [GIT PULL 1/4] DaVinci driver updates   Arnd Bergmann
      • [GIT PULL 1/4] DaVinci driver updates   Sekhar Nori
    • [GIT PULL 1/4] DaVinci driver updates   Arnd Bergmann
  • [GIT PULL 1/4] DaVinci driver updates   Sekhar Nori
• [GIT PULL 2/4]: DaVinci SoC support updates (part 2)   Sekhar Nori
  • [GIT PULL 2/4]: DaVinci SoC support updates (part 2)   Arnd Bergmann
• [GIT PULL 3/4] DaVinci device-tree updates (part 2)   Sekhar Nori
  • [GIT PULL 3/4] DaVinci device-tree updates (part 2)   Arnd Bergmann
• [GIT PULL 4/4] DaVinci defconfig updates (part 2)   Sekhar Nori
  • [GIT PULL 4/4] DaVinci defconfig updates (part 2)   Arnd Bergmann
• [PATCH v3 2/3] crypto: brcm: Add Broadcom SPU driver   Herbert Xu
  • [PATCH v3 2/3] crypto: brcm: Add Broadcom SPU driver   Rob Rice
• [PATCH] iommu: mtk: remove bogus 'select' statements   Arnd Bergmann
  • [PATCH] iommu: mtk: remove bogus 'select' statements   Joerg Roedel
• [PATCH] clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i   Arnd Bergmann
  • [PATCH] clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i   Chen-Yu Tsai
  • [PATCH] clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i   Maxime Ripard
  • [PATCH] clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i   Stephen Boyd
• [PATCH 00/13] ARM: at91; pm: cleanup   Alexandre Belloni
  • [PATCH 01/13] ARM: at91: pm: cleanup headers   Alexandre Belloni
  • [PATCH 02/13] ARM: at91: pm: move at91_ramc_read/write to pm.c   Alexandre Belloni
  • [PATCH 03/13] ARM: at91: pm: Move global variables into at91_pm_data   Alexandre Belloni
  • [PATCH 04/13] ARM: at91: pm: use struct at91_pm_data in pm_suspend.S   Alexandre Belloni
  • [PATCH 05/13] ARM: at91: pm: use struct members directly   Alexandre Belloni
  • [PATCH 06/13] ARM: at91: pm: simplify at91rm9200_standby   Alexandre Belloni
  • [PATCH 07/13] ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.   Alexandre Belloni
  • [PATCH 08/13] ARM: at91: pm: tie the memory controller type to the ramc id   Alexandre Belloni
  • [PATCH 09/13] ARM: at91: pm: tie the USB clock mask to the pmc   Alexandre Belloni
  • [PATCH 10/13] ARM: at91: pm: merge all at91sam9*_pm_init   Alexandre Belloni
  • [PATCH 11/13] ARM: at91: pm: remove at91_pm_set_standby   Alexandre Belloni
  • [PATCH 12/13] ARM: at91: pm: use C functions for standby   Alexandre Belloni
  • [PATCH 13/13] ARM: at91: pm: Allow PM even if SRAM allocation failed   Alexandre Belloni
• [PATCH 3/3 v4] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC   Linus Walleij
  • [PATCH 3/3 v4] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC   Jonathan Cameron
    • [PATCH 3/3 v4] iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC   Linus Walleij
• [PATCH 0/5] Implement SMMU passthrough using the default domain   Rob Clark
  • [PATCH 0/5] Implement SMMU passthrough using the default domain   Will Deacon
    • [PATCH 0/5] Implement SMMU passthrough using the default domain   Rob Clark
  • [PATCH 0/5] Implement SMMU passthrough using the default domain   Sricharan
    • [PATCH 0/5] Implement SMMU passthrough using the default domain   Will Deacon
      • [PATCH 0/5] Implement SMMU passthrough using the default domain   Sricharan
• [PATCH v2 1/2] ARM: davinci: Allocate extra interrupts   Sekhar Nori
  • [PATCH v2 1/2] ARM: davinci: Allocate extra interrupts   David Lechner
• [PATCH v6 1/3] dt: bindings: add documentation for zx2967 family thermal sensor   Baoyou Xie
  • [PATCH v6 2/3] MAINTAINERS: add zx2967 thermal drivers to ARM ZTE architecture   Baoyou Xie
  • [PATCH v6 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v6 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Eduardo Valentin
    • [PATCH v6 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Mathieu Poirier
• [PATCH v3 08/10] dmaengine: sun6i: allow build on ARM64 platforms (sun50i)   Icenowy Zheng
  • [PATCH v3 08/10] dmaengine: sun6i: allow build on ARM64 platforms (sun50i)   Vinod Koul
• [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   Thomas Petazzoni
  • [PATCHv3 net-next 05/12] net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'   Thomas Petazzoni
  • [PATCHv3 net-next 06/12] net: mvpp2: drop useless fields in mvpp2_bm_pool and related code   Thomas Petazzoni
  • [PATCHv3 net-next 07/12] net: mvpp2: simplify mvpp2_bm_bufs_add()   Thomas Petazzoni
  • [PATCHv3 net-next 08/12] net: mvpp2: remove unused register definitions   Thomas Petazzoni
  • [PATCHv3 net-next 09/12] net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT   Thomas Petazzoni
  • [PATCHv3 net-next 10/12] net: mvpp2: simplify MVPP2_PRS_RI_* definitions   Thomas Petazzoni
  • [PATCHv3 net-next 11/12] net: mvpp2: switch to build_skb() in the RX path   Thomas Petazzoni
    • [PATCHv3 net-next 11/12] net: mvpp2: switch to build_skb() in the RX path   Marcin Wojtas
  • [PATCHv3 net-next 12/12] net: mvpp2: enable building on 64-bit platforms   Thomas Petazzoni
  • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   Thomas Petazzoni
  • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   Russell King - ARM Linux
    • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   Thomas Petazzoni
      • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   David Miller
      • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   Thomas Petazzoni
      • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   David Miller
      • [PATCHv3 net-next 00/12] net: mvpp2: misc improvements and preparation patches   Thomas Petazzoni
• [PATCHv3 net-next 01/12] net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set   Thomas Petazzoni
• [PATCHv3 net-next 02/12] net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()   Thomas Petazzoni
• [PATCHv3 net-next 03/12] net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()   Thomas Petazzoni
• [PATCHv3 net-next 04/12] net: mvpp2: release reference to txq_cpu[] entry after unmapping   Thomas Petazzoni
• [PATCHv2 net-next 02/11] net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()   Thomas Petazzoni
• [PATCHv2 net-next 09/11] net: mvpp2: simplify MVPP2_PRS_RI_* definitions   Thomas Petazzoni
• [PATCHv2 net-next 00/11] net: mvpp2: misc improvements and preparation patches   Thomas Petazzoni
• [kvmtool PATCH v9 00/15] kvmtool: arm: ITS emulation and GSI routing support   Andre Przywara
  • [kvmtool PATCH v9 01/15] FDT: use static phandles   Andre Przywara
  • [kvmtool PATCH v9 02/15] arm: use static DT phandle for the GIC   Andre Przywara
  • [kvmtool PATCH v9 03/15] irq: move IRQ routing into irq.c   Andre Przywara
  • [kvmtool PATCH v9 04/15] MSI-X: update GSI routing after changed MSI-X configuration   Andre Przywara
  • [kvmtool PATCH v9 05/15] virtio: fix endianness check for vhost support   Andre Przywara
  • [kvmtool PATCH v9 06/15] PCI: Only allocate IRQ routing entry when available   Andre Przywara
  • [kvmtool PATCH v9 07/15] update public Linux headers for GICv3 ITS emulation   Andre Przywara
  • [kvmtool PATCH v9 08/15] arm: allow vGICv3 emulation   Andre Przywara
  • [kvmtool PATCH v9 09/15] arm: allow creation of an MSI register frame region   Andre Przywara
  • [kvmtool PATCH v9 10/15] arm: FDT: create MSI controller DT node   Andre Przywara
  • [kvmtool PATCH v9 11/15] add kvm__check_vm_capability   Andre Przywara
  • [kvmtool PATCH v9 12/15] PCI: inject PCI device ID on MSI injection   Andre Przywara
  • [kvmtool PATCH v9 13/15] arm: setup SPI IRQ routing tables   Andre Przywara
  • [kvmtool PATCH v9 14/15] extend GSI IRQ routing to take a device ID   Andre Przywara
  • [kvmtool PATCH v9 15/15] arm64: enable GICv3-ITS emulation   Andre Przywara
• [PATCH v2 1/2] virtio: Make ARM SMMU workaround more specific   Robin Murphy
• [PATCH v2 2/2] virtio: Document DMA coherency   Robin Murphy
  • [PATCH v2 2/2] virtio: Document DMA coherency   Will Deacon
  • [PATCH v2 2/2] virtio: Document DMA coherency   Rob Herring
• [PATCHv2 net-next 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support   Thomas Petazzoni
  • [PATCHv2 net-next 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support   Thomas Petazzoni
    • [PATCHv2 net-next 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support   Russell King - ARM Linux
      • [PATCHv2 net-next 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support   Thomas Petazzoni
      • [PATCHv2 net-next 01/16] dt-bindings: net: update Marvell PPv2 binding for PPv2.2 support   Thomas Petazzoni
• [PATCH] dt-bindings: net: remove reference to fixed link support   Thomas Petazzoni
  • [PATCH] dt-bindings: net: remove reference to fixed link support   David Miller
    • [PATCH] dt-bindings: net: remove reference to fixed link support   Rob Herring
• [PATCH] log2: make order_base_2() behave correctly on const input value zero   Ard Biesheuvel
  • [PATCH] log2: make order_base_2() behave correctly on const input value zero   kbuild test robot
  • [PATCH] log2: make order_base_2() behave correctly on const input value zero   kbuild test robot
  • [PATCH] log2: make order_base_2() behave correctly on const input value zero   Linus Torvalds
    • [PATCH] log2: make order_base_2() behave correctly on const input value zero   Ard Biesheuvel
• [PATCH] ARM: dts: Add EMAC AXI settings for Arria10   thor.thayer at linux.intel.com
  • [PATCH] ARM: dts: Add EMAC AXI settings for Arria10   Dinh Nguyen
• [PATCH V2 0/3] iommu/arm-smmu: Add runtime pm/sleep support   Sricharan R
  • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Sricharan R
    • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Mark Rutland
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Sricharan
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Mark Rutland
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Sricharan
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Robin Murphy
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Sricharan
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Mark Rutland
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Robin Murphy
      • [PATCH V2 1/3] iommu/arm-smmu: Add pm_runtime/sleep ops   Sricharan
  • [PATCH V2 2/3] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device   Sricharan R
  • [PATCH V2 3/3] iommu/arm-smmu: Add the device_link between masters and smmu   Sricharan R
• [PATCH 1/2] arm64: fix erroneous __raw_read_system_reg() cases   Mark Rutland
  • [PATCH 2/2] arm64: ensure __raw_read_system_reg() is self-consistent   Mark Rutland
• [PATCH v4] efi: arm64: Add vmlinux debug link to the Image binary   Ard Biesheuvel
  • [PATCH v4] efi: arm64: Add vmlinux debug link to the Image binary   Will Deacon
    • [PATCH v4] efi: arm64: Add vmlinux debug link to the Image binary   Ard Biesheuvel
      • [PATCH v4] efi: arm64: Add vmlinux debug link to the Image binary   Ard Biesheuvel
      • [PATCH v4] efi: arm64: Add vmlinux debug link to the Image binary   Will Deacon
      • [PATCH v4] efi: arm64: Add vmlinux debug link to the Image binary   Ard Biesheuvel
• [PATCH V6 2/5] PCI: Adapt pci_register_io_range() for indirect-IO and PCI I/O translation   John Garry
  • [PATCH V6 2/5] PCI: Adapt pci_register_io_range() for indirect-IO and PCI I/O translation   Rafael J. Wysocki
  • [PATCH V6 2/5] PCI: Adapt pci_register_io_range() for indirect-IO and PCI I/O translation   John Garry
• [GIT PULL] Reset controller changes for v4.11, part 2   Philipp Zabel
  • [GIT PULL] Reset controller changes for v4.11, part 2   Arnd Bergmann
• [PATCH v2 3/3] arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7   Krzysztof Kozlowski
• [GIT PULL] ARM: mvebu: fixes for v4.10 (#1)   Gregory CLEMENT
  • [GIT PULL] ARM: mvebu: fixes for v4.10 (#1)   Arnd Bergmann
• [PATCH v3 1/2] arm64: dts: exynos: Add USB 3.0 controller node for Exynos7   Krzysztof Kozlowski
• [PATCH v3 2/2] arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost   Krzysztof Kozlowski
• [PATCH v3 1/7] soc: smasung: pmu: Add register defines for pad retention control   Krzysztof Kozlowski
• [PATCH v2] log2: make order_base_2() behave correctly on const input value zero   Ard Biesheuvel
• [GIT PULL 0/4] ARM: exynos: Third (last) round for v4.11   Krzysztof Kozlowski
  • [GIT PULL 2/4] soc: samsung: pmu for v4.11, third round   Krzysztof Kozlowski
    • [GIT PULL 2/4] soc: samsung: pmu for v4.11, third round   Arnd Bergmann
  • [GIT PULL 3/4] ARM: dts: exynos: DT for v4.11, third round   Krzysztof Kozlowski
    • [GIT PULL 3/4] ARM: dts: exynos: DT for v4.11, third round   Arnd Bergmann
  • [GIT PULL 4/4] arm64: dts: exynos: DT64 for v4.11, third round   Krzysztof Kozlowski
    • [GIT PULL 4/4] arm64: dts: exynos: DT64 for v4.11, third round   Arnd Bergmann
      • [GIT PULL 4/4] arm64: dts: exynos: DT64 for v4.11, third round   Krzysztof Kozlowski
      • [GIT PULL 4/4] arm64: dts: exynos: DT64 for v4.11, third round   Sylwester Nawrocki
      • [GIT PULL 4/4] arm64: dts: exynos: DT64 for v4.11, third round   Krzysztof Kozlowski
      • [GIT PULL 4/4] arm64: dts: exynos: DT64 for v4.11, third round   Arnd Bergmann
• [GIT PULL 1/4] soc: samsung: pm_domains for v4.11   Krzysztof Kozlowski
  • [GIT PULL 1/4] soc: samsung: pm_domains for v4.11   Arnd Bergmann
• [PATCH 0/4] phy/mfd/soc: exynos: Header cleanup   Krzysztof Kozlowski
• [PATCH 5/7] arm64: arch_timer: work around Hisilicon erratum 161010101   Mark Rutland
  • [PATCH 5/7] arm64: arch_timer: work around Hisilicon erratum 161010101   Daniel Lezcano
• Unhandled fault: alignment fault (0x92000061) at un-aligned address   Rajasekhar Pulluru
• [PATCH] ARM: dts: at91: sama5d2: add sfrbu   Alexandre Belloni
• [PATCH 01/23] sama5d2.dtsi: workaround SPI DMA   Alexandre Belloni
  • [PATCH 02/23] PMC backup   Alexandre Belloni
  • [PATCH 03/23] IRQ backup   Alexandre Belloni
  • [PATCH 04/23] TCB backup   Alexandre Belloni
  • [PATCH 05/23] ARM: at91: sama5d2 backup   Alexandre Belloni
  • [PATCH 06/23] tty/serial: atmel: ensure state is restored after suspending   Alexandre Belloni
  • [PATCH 07/23] pinctrl: at91-pio4: handle suspend to ram   Alexandre Belloni
  • [PATCH 01/23] sama5d2.dtsi: workaround SPI DMA   Alexandre Belloni
• [PATCH] ARM: dts: at91: sama5d2_xplained: enable RTC wakeup   Alexandre Belloni
• [PATCH v2 2/4] crypto: ccm - switch to separate cbcmac driver   Ard Biesheuvel
• [PATCH RESEND] ARM: ep93xx: Disable TS-72xx watchdog before uncompressing   Florian Fainelli
  • [PATCH RESEND] ARM: ep93xx: Disable TS-72xx watchdog before uncompressing   Hartley Sweeten
    • [PATCH RESEND] ARM: ep93xx: Disable TS-72xx watchdog before uncompressing   Arnd Bergmann
  • [PATCH RESEND] ARM: ep93xx: Disable TS-72xx watchdog before uncompressing   Afzal Mohammed
    • [PATCH RESEND] ARM: ep93xx: Disable TS-72xx watchdog before uncompressing   Lokesh Vutla
• [PATCH 4/7] efi: Get the secure boot status [ver #7]   Matt Fleming
• [arm-soc:to-build 8/8] mm/nommu.c:1647:8: error: too few arguments to function 'do_munmap'   kbuild test robot
• [PATCH] efi: libstub: Make file I/O chunking x86-specific   Matt Fleming
• [PATCH] arm64: cache: Skip an unnecessary data cache clean PoU operation   Shanker Donthineni
• [PATCHv2] ARM: dts: Add EMAC AXI settings for Arria10   thor.thayer at linux.intel.com
  • [PATCHv2] ARM: dts: Add EMAC AXI settings for Arria10   Dinh Nguyen
• [PATCH V11 3/3] irqchip: qcom: Add IRQ combiner driver   Agustin Vega-Frias
• [PATCH 11/14] serial: 8250_dw: simplify optional reset handling   Andy Shevchenko
  • [PATCH 11/14] serial: 8250_dw: simplify optional reset handling   Philipp Zabel
  • [PATCH 11/14] serial: 8250_dw: simplify optional reset handling   Philipp Zabel
• [PATCH v3 20/24] media: imx: Add Camera Interface subdev driver   Russell King - ARM Linux
  • [PATCH v3 20/24] media: imx: Add Camera Interface subdev driver   Steve Longerbeam
• [PATCH V10 2/3] ACPI: Add support for ResourceSource/IRQ domain mapping   Agustin Vega-Frias
• [PATCH v3 16/24] media: Add i.MX media core driver   Russell King - ARM Linux
  • [PATCH v3 16/24] media: Add i.MX media core driver   Russell King - ARM Linux
    • [PATCH v3 16/24] media: Add i.MX media core driver   Steve Longerbeam
• [PATCH V12 0/3] irqchip: qcom: Add IRQ combiner driver   Agustin Vega-Frias
  • [PATCH V12 1/3] ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan   Agustin Vega-Frias
    • [PATCH V12 1/3] ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan   Lorenzo Pieralisi
  • [PATCH V12 2/3] ACPI: Add support for ResourceSource/IRQ domain mapping   Agustin Vega-Frias
    • [PATCH V12 2/3] ACPI: Add support for ResourceSource/IRQ domain mapping   Lorenzo Pieralisi
  • [PATCH V12 3/3] irqchip: qcom: Add IRQ combiner driver   Agustin Vega-Frias
  • [PATCH V12 0/3] irqchip: qcom: Add IRQ combiner driver   Hanjun Guo
• [PATCH] ARM: dts: imx6q-bx50v3/imx6q-b450v3/imx6q-b650v3: change pca953x GPIO default settings   Ken Lin
• Memory Incoherence Issue   Doug Berger
  • Memory Incoherence Issue   Will Deacon
    • Memory Incoherence Issue   Doug Berger
• [PATCH v8 15/15] irqchip: mbigen: Add ACPI support   Hanjun Guo
• [PATCH] KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twice   Shanker Donthineni
  • [PATCH] KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twice   Auger Eric
  • [PATCH] KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twice   Christoffer Dall
• [PATCH v8 1/3] dt: bindings: add documentation for zx2967 family watchdog controller   Baoyou Xie
  • [PATCH v8 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v8 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v8 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Mathieu Poirier
      • [PATCH v8 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Guenter Roeck
      • [PATCH v8 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Mathieu Poirier
• [PATCH 0/4] Updates for Marvell Switch SoCs   Chris Packham
  • [PATCH 0/4] Updates for Marvell Switch SoCs   Chris Packham
    • [PATCH 1/4] ARM: dts: armada-xp-98dx3236: combine dfx server nodes   Chris Packham
    • [PATCH 3/4] ARM: mvebu: Add mv98dx3236-soc-id   Chris Packham
    • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Stephen Boyd
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Stephen Boyd
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Arnd Bergmann
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
      • [PATCH 4/4] clk: mvebu: Expand mv98dx3236-core-clock support   Stephen Boyd
• [PATCH 2/4] ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236   Chris Packham
• modversions: redefine kcrctab entries as 32-bit values   Jessica Yu
  • modversions: redefine kcrctab entries as 32-bit values   Jessica Yu
    • modversions: redefine kcrctab entries as 32-bit values   Ard Biesheuvel
• v4.9 to v4.10 regression: oops when USB cable is plugged in.   Pavel Machek
  • v4.9 to v4.10 regression: oops when USB cable is plugged in.   Tony Lindgren
    • v4.9 to v4.10 regression: oops when USB cable is plugged in.   Pavel Machek
• [PATCH 8/9] mfd: wm97xx-core: core support for wm97xx Codec   Robert Jarzmik
• [PATCH v8 0/3] Support qcom's HSIC USB and rewrite USB2 HS support   Peter Chen
• [RFC PATCH v6 2/7] dma: Add simple dma_noop_mmap   Alexandre TORGUE
  • [RFC PATCH v6 2/7] dma: Add simple dma_noop_mmap   Alexandre Torgue
• [RFC PATCH v6 3/7] drivers: dma-coherent: Account dma_pfn_offset when used with device tree   Alexandre TORGUE
• [GIT PULL] ARM: mvebu: dt64 for v4.11 (#3)   Gregory CLEMENT
  • [GIT PULL] ARM: mvebu: dt64 for v4.11 (#3)   Arnd Bergmann
• [PATCH v5 0/3] modversions: redefine kcrctab entries as 32-bit values   Ard Biesheuvel
  • [PATCH v5 1/3] kbuild: modversions: add infrastructure for emitting relative CRCs   Ard Biesheuvel
  • [PATCH v5 2/3] modversions: treat symbol CRCs as 32 bit quantities   Ard Biesheuvel
  • [PATCH v5 3/3] module: unify absolute krctab definitions for 32-bit and 64-bit   Ard Biesheuvel
  • [PATCH v5 0/3] modversions: redefine kcrctab entries as 32-bit values   Linus Torvalds
• [PATCH v7 1/3] dt: bindings: add documentation for zx2967 family thermal sensor   Baoyou Xie
  • [PATCH v7 2/3] MAINTAINERS: add zx2967 thermal drivers to ARM ZTE architecture   Baoyou Xie
  • [PATCH v7 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v7 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Mathieu Poirier
• [PATCH v3 00/12] crypto: atmel-authenc: add support to authenc(hmac(shaX),Y(aes)) modes   Herbert Xu
• [PATCH v3 00/10] crypto - AES for ARM/arm64 updates for v4.11 (round #2)   Herbert Xu
• [PATCH v4 00/10] serial: st-asc: Allow handling of RTS lin   Lee Jones
  • [PATCH v4 01/10] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled   Lee Jones
  • [PATCH v4 02/10] serial: st-asc: Provide RTS functionality   Lee Jones
  • [PATCH v4 03/10] serial: st-asc: Read in all Pinctrl states   Lee Jones
  • [PATCH v4 04/10] serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles   Lee Jones
  • [PATCH v4 05/10] serial: st-asc: Use generic DT binding for announcing RTS/CTS lines   Lee Jones
  • [PATCH v4 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description   Lee Jones
    • [PATCH v4 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description   Rob Herring
  • [PATCH v4 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line   Lee Jones
  • [PATCH v4 08/10] ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control   Lee Jones
  • [PATCH v4 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups   Lee Jones
  • [PATCH v4 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control   Lee Jones
• [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   He Kuang
  • [PATCH v2 3/3] perf tools: Add missing newline in debug messages   He Kuang
  • [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   Will Deacon
    • [PATCH v3] perf tools arm64: Add support for generating bpf prologue   He Kuang
    • [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   Hekuang
      • [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   Will Deacon
      • [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   Masami Hiramatsu
      • [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   Will Deacon
      • [PATCH v2 1/3] perf tools: Use offset instead of dwarfnum in register table.   Masami Hiramatsu
• [PATCH v2 2/3] perf tools: Enable bpf prologue for arm64   He Kuang
• [PATCH v4] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
  • [PATCH v4] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Marc Zyngier
    • [PATCH v4] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
      • [PATCH v4] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Marc Zyngier
      • [PATCH v4] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
• [PATCH 2/2 v2] perf tools: Enable bpf prologue for arm64   Hekuang
• Applied "ASoC: sun8i-codec-analog: Add amplifier event to fix first delay" to the asoc tree   Mark Brown
• [PATCH v2 0/8] mmc: bcm2835: Add new driver for the sdhost controller   Gerd Hoffmann
  • [PATCH v2 1/8] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
  • [PATCH v2 2/8] mmc: bcm2835: Add new driver for the sdhost controller.   Gerd Hoffmann
    • [PATCH v2 2/8] mmc: bcm2835: Add new driver for the sdhost controller.   Stefan Wahren
      • [PATCH v2 2/8] mmc: bcm2835: Add new driver for the sdhost controller.   Gerd Hoffmann
      • [PATCH v2 2/8] mmc: bcm2835: Add new driver for the sdhost controller.   Stefan Wahren
      • [PATCH v2 2/8] mmc: bcm2835: Add new driver for the sdhost controller.   Stefan Wahren
  • [PATCH v2 3/8] mmc: bcm2835: add sdhost controller to devicetree   Gerd Hoffmann
    • [PATCH v2 3/8] mmc: bcm2835: add sdhost controller to devicetree   Eric Anholt
  • [PATCH v2 4/8] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig   Gerd Hoffmann
    • [PATCH v2 4/8] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig   Eric Anholt
  • [PATCH v2 5/8] arm: set CONFIG_MMC_BCM2835=y in multi_v7_defconfig   Gerd Hoffmann
  • [PATCH v2 6/8] arm64: set CONFIG_MMC_BCM2835=y in defconfig   Gerd Hoffmann
  • [PATCH v2 7/8] ARM: dts: bcm283x: switch from &sdhci to &sdhost   Gerd Hoffmann
  • [PATCH v2 8/8] ARM: dts: bcm2837: add &sdhci and &sdhost   Gerd Hoffmann
• [PATCH v3] ARM: dts: i.MX25: add AIPS control registers   Martin Kaiser
  • [PATCH v3] ARM: dts: i.MX25: add AIPS control registers   Sascha Hauer
• [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Marek Szyprowski
  • [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Vinod Koul
  • [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Vinod Koul
    • [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Marek Szyprowski
      • [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Ulf Hansson
      • [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Marek Szyprowski
      • [PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback   Vinod Koul
• [GIT PULL 2/5] i.MX cleanups for 4.11   Shawn Guo
• [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   Thomas Petazzoni
  • [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   Robin Murphy
    • [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   Thomas Petazzoni
      • [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   Robin Murphy
    • [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   Russell King - ARM Linux
      • [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   Thomas Petazzoni
      • [PATCHv2 net-next 05/16] net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors   David Laight
• [xlnx:master 117/172] drivers/mtd/spi-nor/spi-nor.c:1423: warning: unused variable 'is_dual'   kbuild test robot
• [RFC 01/13] KVM: arm/arm64: Add vITS save/restore API documentation   Peter Maydell
  • [RFC 01/13] KVM: arm/arm64: Add vITS save/restore API documentation   Marc Zyngier
• [RESEND PATCH] KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twice   Shanker Donthineni
• [PATCH v3 0/3] crypto: time invariant AES for CCM (and CMAC/XCBC)   Ard Biesheuvel
  • [PATCH v3 1/3] crypto: testmgr - add test cases for cbcmac(aes)   Ard Biesheuvel
  • [PATCH v3 2/3] crypto: ccm - switch to separate cbcmac driver   Ard Biesheuvel
    • [PATCH v3 2/3] crypto: ccm - switch to separate cbcmac driver   Ard Biesheuvel
  • [PATCH v3 3/3] crypto: arm64/aes - add NEON/Crypto Extensions CBCMAC/CMAC/XCBC driver   Ard Biesheuvel
  • [PATCH v3 0/3] crypto: time invariant AES for CCM (and CMAC/XCBC)   Herbert Xu
  • [PATCH v3 0/3] crypto: time invariant AES for CCM (and CMAC/XCBC)   Ard Biesheuvel
• [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Sinan Kaya
  • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Marc Zyngier
    • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Sinan Kaya
      • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Marc Zyngier
      • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Sinan Kaya
      • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Lorenzo Pieralisi
      • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Sinan Kaya
  • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Lorenzo Pieralisi
    • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Hanjun Guo
      • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Lorenzo Pieralisi
  • [PATCH v8 00/15] ACPI platform MSI support and its example mbigen   Hanjun Guo
• [PATCH v2 0/5] Support userspace irqchip with arch timers   Christoffer Dall
  • [PATCH v2 1/5] KVM: arm/arm64: Cleanup the arch timer code's irqchip checking   Christoffer Dall
  • [PATCH v2 2/5] KVM: arm/arm64: Add ARM user space interrupt signaling ABI   Christoffer Dall
    • [PATCH v2 2/5] KVM: arm/arm64: Add ARM user space interrupt signaling ABI   Peter Maydell
      • [PATCH v2 2/5] KVM: arm/arm64: Add ARM user space interrupt signaling ABI   Christoffer Dall
  • [PATCH v2 3/5] KVM: arm/arm64: Support arch timers with a userspace gic   Christoffer Dall
  • [PATCH v2 4/5] KVM: arm/arm64: Report PMU overflow interrupts to userspace irqchip   Christoffer Dall
  • [PATCH v2 5/5] KVM: arm/arm64: Advertise support for KVM_CAP_ARM_USER_IRQ   Christoffer Dall
• [PATCHv2 0/3] drivers/perf: arm_pmu: rework IRQ management   Mark Rutland
  • [PATCHv2 1/3] drivers/perf: arm_pmu: rework per-cpu allocation   Mark Rutland
  • [PATCHv2 2/3] drivers/perf: arm_pmu: manage interrupts per-cpu   Mark Rutland
  • [PATCHv2 3/3] drivers/perf: arm_pmu: split irq request from enable   Mark Rutland
• [xlnx:master 2262/2699] drivers/staging/mali/DX910-SW-99002-r5p1-01rel0/driver/src/devicedrv/mali/linux/mali_osk_low_level_mem.c:36:26: error: implicit declaration of function 'ioremap_nocache'   kbuild test robot
• [PATCH v3] arm64: mm: Fix NOMAP page initialization   Robert Richter
  • [PATCH v3] arm64: mm: Fix NOMAP page initialization   Will Deacon
• [PATCH 08/10] iommu/mediatek: Make use of iommu_device_register interface   Joerg Roedel
  • [PATCH 08/10] iommu/mediatek: Make use of iommu_device_register interface   Joerg Roedel
    • [PATCH 08/10] iommu/mediatek: Make use of iommu_device_register interface   kbuild test robot
• [PATCH 09/10] iommu/exynos: Make use of iommu_device_register interface   Joerg Roedel
  • [PATCH 09/10] iommu/exynos: Make use of iommu_device_register interface   Joerg Roedel
    • [PATCH 09/10] iommu/exynos: Make use of iommu_device_register interface   kbuild test robot
    • [PATCH 09/10] iommu/exynos: Make use of iommu_device_register interface   Marek Szyprowski
      • [PATCH 09/10] iommu/exynos: Make use of iommu_device_register interface   Joerg Roedel
      • [PATCH 09/10] iommu/exynos: Make use of iommu_device_register interface   Marek Szyprowski
• [PATCH 10/10] iommu: Remove iommu_register_instance interface   Joerg Roedel
  • [PATCH 10/10] iommu: Remove iommu_register_instance interface   Joerg Roedel
• [RFC v4 00/10] Provide the EL1 physical timer to the VM   Jintack Lim
  • [RFC v4 02/10] KVM: arm/arm64: Move cntvoff to each timer context   Jintack Lim
  • [RFC v4 03/10] KVM: arm/arm64: Decouple kvm timer functions from virtual timer   Jintack Lim
  • [RFC v4 04/10] KVM: arm/arm64: Add the EL1 physical timer context   Jintack Lim
  • [RFC v4 05/10] KVM: arm/arm64: Initialize the emulated EL1 physical timer   Jintack Lim
  • [RFC v4 06/10] KVM: arm/arm64: Update the physical timer interrupt level   Jintack Lim
  • [RFC v4 07/10] KVM: arm/arm64: Set a background timer to the earliest timer expiration   Jintack Lim
  • [RFC v4 08/10] KVM: arm/arm64: Set up a background timer for the physical timer emulation   Jintack Lim
  • [RFC v4 09/10] KVM: arm64: Add the EL1 physical timer access handler   Jintack Lim
  • [RFC v4 10/10] KVM: arm/arm64: Emulate the EL1 phys timer registers   Jintack Lim
  • [RFC v4 00/10] Provide the EL1 physical timer to the VM   Marc Zyngier
    • [RFC v4 00/10] Provide the EL1 physical timer to the VM   Jintack Lim
      • [RFC v4 00/10] Provide the EL1 physical timer to the VM   Marc Zyngier
• [RFC v4 01/10] KVM: arm/arm64: Abstract virtual timer context into separate structure   Jintack Lim
• [GIT PULL] SoCFPGA DTS updates for v4.11, part 2   Dinh Nguyen
  • [GIT PULL] SoCFPGA DTS updates for v4.11, part 2   Arnd Bergmann
• [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2"   Lukasz Majewski
  • [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2"   Dave Gerlach
  • [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2"   Viresh Kumar
• [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Lukasz Majewski
  • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Nishanth Menon
    • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Lukasz Majewski
      • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Nishanth Menon
  • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Dave Gerlach
    • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Lukasz Majewski
      • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Nishanth Menon
      • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Lukasz Majewski
    • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Lukasz Majewski
      • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Dave Gerlach
      • [PATCH 2/2] DTS: dra7: Add "opp_high" opp node to support 1.5 GHz SoC operation   Lukasz Majewski
• [PATCH] MAINTAINERS: socfpga: update email for Dinh Nguyen   Dinh Nguyen
  • [PATCH] MAINTAINERS: socfpga: update email for Dinh Nguyen   Arnd Bergmann
• [PATCH V8 00/11] IOMMU probe deferral support   Sricharan R
  • [PATCH V8 02/11] iommu/of: Prepare for deferred IOMMU configuration   Sricharan R
  • [PATCH V8 03/11] of: dma: Move range size workaround to of_dma_get_range()   Sricharan R
  • [PATCH V8 04/11] of: dma: Make of_dma_deconfigure() public   Sricharan R
  • [PATCH V8 05/11] ACPI/IORT: Add function to check SMMUs drivers presence   Sricharan R
  • [PATCH V8 06/11] of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices   Sricharan R
  • [PATCH V8 07/11] iommu: of: Handle IOMMU lookup failure with deferred probing or error   Sricharan R
  • [PATCH V8 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Sricharan R
    • [PATCH V8 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Sricharan
      • [PATCH V8 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Robin Murphy
      • [PATCH V8 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error   Sricharan
  • [PATCH V8 09/11] arm64: dma-mapping: Remove the notifier trick to handle early setting of dma_ops   Sricharan R
  • [PATCH V8 10/11] iommu/arm-smmu: Clean up early-probing workarounds   Sricharan R
  • [PATCH V8 11/11] ACPI/IORT: Remove linker section for IORT entries probing   Sricharan R
• [PATCH V8 01/11] iommu/of: Refactor of_iommu_configure() for error handling   Sricharan R
• [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   Ard Biesheuvel
  • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   David Howells
    • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   Ard Biesheuvel
      • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   David Howells
      • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   David Howells
      • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   Ard Biesheuvel
      • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   Ard Biesheuvel
      • [PATCH 7/7] efi: Print the secure boot status in x86 setup_arch() [ver #7]   David Howells
• [PATCH] staging: bcm2835-audio: fix spacing of macro   Hendrik v. Raven
  • [PATCH] staging: bcm2835-audio: fix spacing of macro   Joe Perches
    • [PATCH] staging: bcm2835-audio: remove unused macro   Hendrik v. Raven
      • [PATCH] staging: bcm2835-audio: remove unused macro   Greg Kroah-Hartman
      • [PATCH v2] staging: bcm2835-audio: remove unused macro   Hendrik v. Raven
• [PATCH] ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in   Arnd Bergmann
  • [PATCH] ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in   Arnd Bergmann
    • [PATCH] ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in   Robert Jarzmik
• [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver   Dave Gerlach
  • [PATCH v5 1/4] PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API   Dave Gerlach
  • [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq   Dave Gerlach
    • [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq   Rob Herring
      • [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq   Dave Gerlach
      • [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq   Rafael J. Wysocki
      • [PATCH v5 2/4] Documentation: dt: add bindings for ti-cpufreq   Dave Gerlach
    • [PATCH v6 2/4] Documentation: dt: add bindings for ti-cpufreq   Dave Gerlach
      • [PATCH v6 2/4] Documentation: dt: add bindings for ti-cpufreq   Rob Herring
      • [PATCH v6 2/4] Documentation: dt: add bindings for ti-cpufreq   Rafael J. Wysocki
      • [PATCH v6 2/4] Documentation: dt: add bindings for ti-cpufreq   Viresh Kumar
      • [PATCH v6 2/4] Documentation: dt: add bindings for ti-cpufreq   Rafael J. Wysocki
      • [PATCH v6 2/4] Documentation: dt: add bindings for ti-cpufreq   Dave Gerlach
  • [PATCH v5 3/4] cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime   Dave Gerlach
  • [PATCH v5 4/4] cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms   Dave Gerlach
  • [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver   Lukasz Majewski
  • [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver   Dave Gerlach
    • [PATCH v5 0/4] cpufreq: Introduce TI CPUFreq/OPP Driver   Dave Gerlach
• [PATCHv2 0/2] Hardening configs refactor/rename   Laura Abbott
  • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Laura Abbott
    • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Mark Rutland
    • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Kees Cook
      • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Russell King - ARM Linux
      • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Kees Cook
      • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Russell King - ARM Linux
      • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Kees Cook
      • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Laura Abbott
      • [PATCHv2 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Pavel Machek
  • [PATCHv2 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Laura Abbott
    • [PATCHv2 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Mark Rutland
    • [PATCHv2 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Kees Cook
      • [PATCHv2 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Laura Abbott
      • [PATCHv2 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Kees Cook
• [PATCH v4 0/3] Add Broadcom SPU Crypto Driver   Rob Rice
  • [PATCH v4 1/3] crypto: brcm: DT documentation for Broadcom SPU hardware   Rob Rice
  • [PATCH v4 3/3] arm64: dts: ns2: Add Broadcom SPU driver DT entry.   Rob Rice
  • [PATCH v4 0/3] Add Broadcom SPU Crypto Driver   Herbert Xu
    • [PATCH v4 0/3] Add Broadcom SPU Crypto Driver   Jon Mason
      • [PATCH v4 0/3] Add Broadcom SPU Crypto Driver   Florian Fainelli
• [PATCH net-next 0/8] ARM: Alpine: Ethernet support   Antoine Tenart
  • [PATCH net-next 1/8] alpine: add I/O fabric interrupt controller (iofic) helpers   Antoine Tenart
  • [PATCH net-next 2/8] soc: alpine: add udma helpers   Antoine Tenart
  • [PATCH net-next 3/8] pci: add Annapurna Labs PCI id   Antoine Tenart
  • [PATCH net-next 5/8] net: ethernet: annapurna: add statistics helper   Antoine Tenart
    • [PATCH net-next 5/8] net: ethernet: annapurna: add statistics helper   Florian Fainelli
    • [PATCH net-next 5/8] net: ethernet: annapurna: add statistics helper   kbuild test robot
  • [PATCH net-next 6/8] net: ethernet: annapurna: add wol helpers to the Alpine driver   Antoine Tenart
    • [PATCH net-next 6/8] net: ethernet: annapurna: add wol helpers to the Alpine driver   Sergei Shtylyov
      • [PATCH net-next 6/8] net: ethernet: annapurna: add wol helpers to the Alpine driver   David Laight
      • [PATCH net-next 6/8] net: ethernet: annapurna: add wol helpers to the Alpine driver   Sergei Shtylyov
      • [PATCH net-next 6/8] net: ethernet: annapurna: add wol helpers to the Alpine driver   Antoine Tenart
  • [PATCH net-next 7/8] net: ethernet: annapurna: add eee helpers to the Alpine driver   Antoine Tenart
    • [PATCH net-next 7/8] net: ethernet: annapurna: add eee helpers to the Alpine driver   Florian Fainelli
  • [PATCH net-next 8/8] net: ethernet: annapurna: add the coalesce helpers to the Alpine driver   Antoine Tenart
  • [PATCH net-next 4/8] net: ethernet: add the Alpine Ethernet driver   Andrew Lunn
• [PATCH 1/2] arm: dts: qcom: msm8974: Add RPMCC DT node   Georgi Djakov
  • [PATCH 1/2] arm: dts: qcom: msm8974: Add RPMCC DT node   Bjorn Andersson
• [PATCH 2/2] ARM: dts: qcom: Add msm8974 CoreSight components   Georgi Djakov
  • [PATCH 2/2] ARM: dts: qcom: Add msm8974 CoreSight components   Mathieu Poirier
    • [PATCH 2/2] ARM: dts: qcom: Add msm8974 CoreSight components   Georgi Djakov
• [GIT PULL] Amlogic 64-bit DT updates for v4.11, round 2   Kevin Hilman
  • [GIT PULL] Amlogic 64-bit DT updates for v4.11, round 2   Arnd Bergmann
• [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Linus Walleij
  • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Jonathan Cameron
    • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Linus Walleij
    • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Jonathan Cameron
    • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Fabrice Gasnier
      • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Jonathan Cameron
      • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Fabrice Gasnier
      • [PATCH v2 4/5] iio: trigger: add support for STM32 EXTI triggers   Jonathan Cameron
• [PATCH v2 0/6] Add board support for TS-4600   Sebastien Bourdelin
  • [PATCH v2 2/6] ARM: dts: TS-4600: add basic device tree   Sebastien Bourdelin
  • [PATCH v2 4/6] bus: add driver for the Technologic Systems NBUS   Sebastien Bourdelin
    • [PATCH v2 4/6] bus: add driver for the Technologic Systems NBUS   Linus Walleij
      • [PATCH v2 4/6] bus: add driver for the Technologic Systems NBUS   Sebastien Bourdelin
  • [PATCH v2 6/6] watchdog: ts4600: add driver for TS-4600 watchdog   Sebastien Bourdelin
    • [v2,6/6] watchdog: ts4600: add driver for TS-4600 watchdog   Guenter Roeck
    • [PATCH v2 6/6] watchdog: ts4600: add driver for TS-4600 watchdog   Rob Herring
• [PATCH v2 1/6] of: documentation: add bindings documentation for TS-4600   Sebastien Bourdelin
• [PATCH v2 3/6] dt-bindings: bus: Add documentation for the Technologic Systems NBUS   Sebastien Bourdelin
  • [PATCH v2 3/6] dt-bindings: bus: Add documentation for the Technologic Systems NBUS   Rob Herring
• [PATCH v2 5/6] ARM: dts: TS-4600: add NBUS support   Sebastien Bourdelin
• [GIT PULL] Allwinner clock changes for 4.11   Stephen Boyd
• [PATCH 1/2] clk: uniphier: add NAND clock for all UniPhier SoCs   Stephen Boyd
• [PATCH 2/2] clk: uniphier: add eMMC clock for LD11 and LD20 SoCs   Stephen Boyd
• [PATCH 2/3 v3] watchdog: add DT bindings for Cortina Gemini   Linus Walleij
• [PATCH] phy: meson8b-usb2: fix offsets for some of the registers   Martin Blumenstingl
  • [PATCH] phy: meson8b-usb2: fix offsets for some of the registers   Jerome Brunet
• [PATCH 1 0/4] PCI: Use of_device_get_match_data() to simplify probe   Bjorn Helgaas
• [PATCH v9] perf: add qcom l2 cache perf events driver   Neil Leeder
  • [PATCH v9] perf: add qcom l2 cache perf events driver   Mark Rutland
    • [PATCH v9] perf: add qcom l2 cache perf events driver   Leeder, Neil
      • [PATCH v9] perf: add qcom l2 cache perf events driver   Mark Rutland
• [PATCH] One coding style correction.   Victor Vaschenko
  • [PATCH] One coding style correction.   Greg KH
  • [PATCH] One coding style correction.   Victor Vaschenko
    • [PATCH] One coding style correction.   Greg KH
  • [PATCH] One coding style correction.   Victor Vaschenko
• [PATCH] tty/serial: atmel: ensure state is restored after suspending   Alexandre Belloni
  • [PATCH] tty/serial: atmel: ensure state is restored after suspending   Nicolas Ferre
  • [PATCH] tty/serial: atmel: ensure state is restored after suspending   Richard Genoud
• [PATCH] clocksource: arm_arch_timer: print timer value at init time   Olof Johansson
  • [PATCH] clocksource: arm_arch_timer: print timer value at init time   Daniel Lezcano
    • [PATCH] clocksource: arm_arch_timer: print timer value at init time   Mark Rutland
• [PATCH v9 1/3] dt: bindings: add documentation for zx2967 family watchdog controller   Baoyou Xie
  • [PATCH v9 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Baoyou Xie
    • [PATCH v9 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Guenter Roeck
      • [PATCH v9 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Shawn Guo
      • [PATCH v9 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Guenter Roeck
      • [PATCH v9 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture   Shawn Guo
  • [PATCH v9 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v9 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Guenter Roeck
    • [PATCH v9 3/3] watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family   Mathieu Poirier
  • [PATCH v9 1/3] dt: bindings: add documentation for zx2967 family watchdog controller   Guenter Roeck
• [PATCH v8 1/3] dt: bindings: add documentation for zx2967 family thermal sensor   Baoyou Xie
  • [PATCH v8 2/3] MAINTAINERS: add zx2967 thermal drivers to ARM ZTE architecture   Baoyou Xie
  • [PATCH v8 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v8 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Mathieu Poirier
• [PATCH v3 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Shawn Guo
• [Update][PATCH v8 15/15] irqchip: mbigen: Add ACPI support   Hanjun Guo
• [PATCH 3/7] IIO: add bindings for STM32 DFSDM ADC driver   Jonathan Cameron
• [PATCH 6/7] ASoC: add bindings for STM32 DFSDM driver   Jonathan Cameron
• [PATCH 2/7] MFD: add STM32 DFSDM support   Jonathan Cameron
• [PATCH V5 5/5] LPC: Add the ACPI LPC support   John Garry
• [PATCH] bcm2835-audio: One coding style correction in bcm2835-ctl.c.   Victor Vaschenko
  • [PATCH] bcm2835-audio: One coding style correction in bcm2835-ctl.c.   Greg KH
• [PATCH] ARM: imx6: add ZII RDU2 boards   Chris Healy
• [PATCH RESEND 0/3] arm64: Add ARCH_THUNDER2   Jayachandran C
  • [PATCH RESEND 1/3] arm64: add THUNDER2 processor family   Jayachandran C
    • [PATCH RESEND 1/3] arm64: add THUNDER2 processor family   Will Deacon
      • [PATCH RESEND 1/3] arm64: add THUNDER2 processor family   Arnd Bergmann
      • [PATCH RESEND 1/3] arm64: add THUNDER2 processor family   Jayachandran C
      • [PATCH RESEND 1/3] arm64: add THUNDER2 processor family   Arnd Bergmann
      • [PATCH RESEND 1/3] arm64: add THUNDER2 processor family   Jayachandran C
  • [PATCH RESEND 2/3] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
  • [PATCH RESEND 3/3] arm64: add ARCH_THUNDER2 to defconfig   Jayachandran C
• [PATCH] somedriver: remove the initialization of static pointers.   AbdAllah-MEZITI
  • [PATCH] somedriver: remove the initialization of static pointers.   Greg Kroah-Hartman
    • [PATCH] somedriver: remove the initialization of static pointers.   AbdAllah MEZITI
      • [PATCH] somedriver: remove the initialization of static pointers.   Mathieu Poirier
• [PATCH] ARM: dts: Configure regulators for droid 4   Tony Lindgren
• [PATCH] ARM: dts: Add keypad support for droid 4   Tony Lindgren
• [PATCH net-next v5 0/4] net: dsa: Support for pdata in dsa2   Florian Fainelli
  • [PATCH net-next v5 0/4] net: dsa: Support for pdata in dsa2   Florian Fainelli
    • [PATCH net-next v5 1/4] net: dsa: Rename and export dev_to_net_device()   Florian Fainelli
    • [PATCH net-next v5 2/4] net: dsa: Add support for platform data   Florian Fainelli
    • [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices   Florian Fainelli
      • [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices   Andrew Lunn
      • [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices   Florian Fainelli
      • [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices   Andrew Lunn
      • [PATCH net-next v5 3/4] net: phy: Allow pre-declaration of MDIO devices   Florian Fainelli
    • [PATCH net-next v5 4/4] ARM: orion: Register DSA switch as a MDIO device   Florian Fainelli
  • [PATCH net-next v5 0/4] net: dsa: Support for pdata in dsa2   David Miller
• [PATCH 0/2] scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
  • [PATCH 0/2] scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Neil Armstrong
    • [PATCH 0/2] scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
  • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
    • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Kevin Hilman
      • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
      • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Michał Zegan
      • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
      • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Michał Zegan
      • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Neil Armstrong
      • [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
• [PATCH 2/2] cpufreq: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
• [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Marek Vasut
  • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Fabio Estevam
    • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Clemens Gruber
      • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Marek Vasut
    • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Marek Vasut
      • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Fabio Estevam
      • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Marek Vasut
      • [PATCH] serial: imx: Only enable UART DMA on i.MX6Q and i.MX53   Fabio Estevam
• [PATCH 10/22 v2] mtd: physmap_of: add a hook for Gemini flash probing   Marek Vasut
  • [PATCH 10/22 v2] mtd: physmap_of: add a hook for Gemini flash probing   Brian Norris
• [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Robert Jarzmik
  • [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Petr Cvek
  • [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Petr Cvek
    • [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Robert Jarzmik
      • [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Petr Cvek
      • [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Robert Jarzmik
      • [BUG] usb: gadget: Kernel oops with UVC USB gadget and configfs   Laurent Pinchart
• [PATCH 2/2] watchdog: sama5d4: Implement resume hook   Guenter Roeck
• [RFCv2 PATCH 4/5] drm/bridge: add dw-hdmi cec driver using Hans Verkuil's CEC code   Pierre-Hugues Husson
• [RFCv2 PATCH 3/5] drm/bridge: dw_hdmi: add HDMI notifier support   Pierre-Hugues Husson
• [PATCH v2 0/5] Add Cavium ARCH_THUNDER2 platform   Jayachandran C
  • [PATCH v2 1/5] arm64: add THUNDER2 processor family   Jayachandran C
    • [PATCH v2 1/5] arm64: add THUNDER2 processor family   Arnd Bergmann
  • [PATCH v2 2/5] MAINTAINERS: Add Cavium ThunderX2 entry   Jayachandran C
    • [PATCH v2 2/5] MAINTAINERS: Add Cavium ThunderX2 entry   Arnd Bergmann
  • [PATCH v2 3/5] arm64: dts: add device trees for ARCH_THUNDER2   Jayachandran C
  • [PATCH v2 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
  • [PATCH v2 5/5] arm64: add ARCH_THUNDER2 to defconfig   Jayachandran C
    • [PATCH v2 5/5] arm64: add ARCH_THUNDER2 to defconfig   Arnd Bergmann
  • [PATCH v2 0/5] Add Cavium ARCH_THUNDER2 platform   Florian Fainelli
    • [PATCH v2 0/5] Add Cavium ARCH_THUNDER2 platform   Jayachandran C
• [PATCH v5 0/6] Rockchip dw-mipi-dsi driver   Chris Zhong
  • [PATCH v5 1/6] dt-bindings: add rk3399 support for dw-mipi-rockchip   Chris Zhong
  • [PATCH v5 2/6] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Chris Zhong
    • [PATCH v5 2/6] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Sean Paul
  • [PATCH v5 3/6] drm/rockchip/dsi: dw-mipi: correct the coding style   Chris Zhong
  • [PATCH v5 4/6] drm/rockchip/dsi: remove mode_valid function   Chris Zhong
  • [PATCH v5 5/6] dt-bindings: add power domain node for dw-mipi-rockchip   Chris Zhong
  • [PATCH v5 6/6] drm/rockchip/dsi: add dw-mipi power domain support   Chris Zhong
• [PATCH v2 2/2] arm: dts: mt2701: add nor flash node   Guochun Mao
  • [PATCH v2 2/2] arm: dts: mt2701: add nor flash node   Boris Brezillon
    • [PATCH v2 2/2] arm: dts: mt2701: add nor flash node   Matthias Brugger
      • [PATCH v2 2/2] arm: dts: mt2701: add nor flash node   Guochun Mao
• [PATCH 2/2] staging: vchip_shim: Remove unneeded stddef.h include   Stafford Horne
• [PATCH 1/2] drm/rockchip: support mode_valid for crtc   Mark Yao
  • [PATCH 1/2] drm/rockchip: support mode_valid for crtc   Sean Paul
    • [PATCH 1/2] drm/rockchip: support mode_valid for crtc   Mark yao
      • [PATCH 1/2] drm/rockchip: support mode_valid for crtc   Daniel Vetter
• [PATCH 2/2] drm/rockchip: dw_hdmi: check display mode with crtc mode valid   Mark Yao
• [PATCH v17 0/7] drm/rockchip: Add CDN DP driver   Chris Zhong
  • [PATCH v17 1/7] drm/rockchip: cdn-dp: add cdn DP support for rk3399   Chris Zhong
  • [PATCH v17 2/7] drm/rockchip: cdn-dp: Load firmware if no monitor connected   Chris Zhong
  • [PATCH v17 3/7] drm/rockchip: cdn-dp: Do not run worker while suspended   Chris Zhong
  • [PATCH v17 4/7] drm/rockchip: cdn-dp: do not use drm_helper_hpd_irq_event   Chris Zhong
  • [PATCH v17 5/7] drm/rockchip: cdn-dp: Move mutex_init to probe   Chris Zhong
  • [PATCH v17 6/7] drm/rockchip: cdn-dp: retry to check sink count   Chris Zhong
  • [PATCH v17 7/7] drm/rockchip: cdn-dp: don't configure hardware in mode_set   Chris Zhong
  • [PATCH v17 0/7] drm/rockchip: Add CDN DP driver   Mark yao
• [PATCH 14/22] ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B   Hans Ulli Kroll
  • [PATCH 14/22] ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B   Linus Walleij
    • [PATCH 14/22] ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B   Hans Ulli Kroll
      • [PATCH 14/22] ARM: dts: add a devicetree for Raidsonic NAS IB-4220-B   Linus Walleij
• [PATCH v2 1/5] Documentation: dt: iio: document stm32 adc trigger polarity   Jonathan Cameron
• [PATCH 4/4] ARM: dts: add PCI to the Gemini DTSI   Hans Ulli Kroll
  • [PATCH 4/4] ARM: dts: add PCI to the Gemini DTSI   Linus Walleij
    • [PATCH 4/4] ARM: dts: add PCI to the Gemini DTSI   Hans Ulli Kroll
      • [PATCH 4/4] ARM: dts: add PCI to the Gemini DTSI   Arnd Bergmann
      • [PATCH 4/4] ARM: dts: add PCI to the Gemini DTSI   Linus Walleij
• [PATCH v3 06/24] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors   Laurent Pinchart
  • [PATCH v3 06/24] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors   Laurent Pinchart
    • [PATCH v3 06/24] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors   Russell King - ARM Linux
• [PATCH v3 12/24] add mux and video interface bridge entity functions   Laurent Pinchart
  • [PATCH v3 12/24] add mux and video interface bridge entity functions   Philipp Zabel
• [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Laurent Pinchart
  • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Hans Verkuil
    • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Laurent Pinchart
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Steve Longerbeam
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Laurent Pinchart
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Philipp Zabel
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Laurent Pinchart
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Benoit Parrot
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Sakari Ailus
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Laurent Pinchart
  • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Sakari Ailus
    • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Philipp Zabel
      • [PATCH v3 13/24] platform: add video-multiplexer subdevice driver   Laurent Pinchart
• [PATCH v3 15/24] media: Add userspace header file for i.MX   Laurent Pinchart
• [PATCH -next v2] pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()   Wei Yongjun
  • [PATCH -next v2] pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()   Krzysztof Kozlowski
  • [PATCH -next v2] pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()   Linus Walleij
    • [PATCH -next v2] pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()   Marek Szyprowski
      • [PATCH -next v2] pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()   Tomasz Figa
      • [PATCH -next v2] pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()   Krzysztof Kozlowski
• [PATCH -next] usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()   Wei Yongjun
• [PATCH -next v2] ARM: hisi: fix error return code in hip04_smp_init()   Wei Yongjun
• [PATCH 0/9] ARM: sun5i: Cleanup and reorganisation of the DTSI   Maxime Ripard
  • [PATCH 1/9] ARM: sun5i: A10s: Switch the EMAC pins indices   Maxime Ripard
    • [PATCH 1/9] ARM: sun5i: A10s: Switch the EMAC pins indices   Chen-Yu Tsai
  • [PATCH 2/9] ARM: sun5i: a10s: switch simple framebuffer indices   Maxime Ripard
    • [PATCH 2/9] ARM: sun5i: a10s: switch simple framebuffer indices   Chen-Yu Tsai
  • [PATCH 3/9] ARM: sunxi: Rename pwm0_pins to match our usual pattern   Maxime Ripard
    • [PATCH 3/9] ARM: sunxi: Rename pwm0_pins to match our usual pattern   Chen-Yu Tsai
      • [PATCH 3/9] ARM: sunxi: Rename pwm0_pins to match our usual pattern   Maxime Ripard
  • [PATCH 4/9] ARM: sun5i: Add UART2 pin group   Maxime Ripard
    • [PATCH 4/9] ARM: sun5i: Add UART2 pin group   Chen-Yu Tsai
      • [PATCH 4/9] ARM: sun5i: Add UART2 pin group   Maxime Ripard
  • [PATCH 5/9] ARM: sun5i: Rename UART3 flow control pins   Maxime Ripard
    • [PATCH 5/9] ARM: sun5i: Rename UART3 flow control pins   Chen-Yu Tsai
• [PATCH 6/9] ARM: sun5i: a13: Merge common controllers into the common DTSI   Maxime Ripard
  • [PATCH 6/9] ARM: sun5i: a13: Merge common controllers into the common DTSI   Chen-Yu Tsai
• [PATCH 7/9] ARM: sun5i: a10s: Merge common controllers into the common DTSI   Maxime Ripard
  • [PATCH 7/9] ARM: sun5i: a10s: Merge common controllers into the common DTSI   Chen-Yu Tsai
• [PATCH 8/9] ARM: sun5i: r8: Merge common controllers into the common DTSI   Maxime Ripard
  • [PATCH 8/9] ARM: sun5i: r8: Merge common controllers into the common DTSI   Chen-Yu Tsai
• [PATCH 9/9] ARM: sun5i: gr8: Use common sun5i DTSI   Maxime Ripard
  • [PATCH 9/9] ARM: sun5i: gr8: Use common sun5i DTSI   Chen-Yu Tsai
    • [PATCH 9/9] ARM: sun5i: gr8: Use common sun5i DTSI   Maxime Ripard
• [PATCH 3.10 059/319] arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO   Willy Tarreau
• [v5,3/7] rtc: ac100: Add RTC driver for X-Powers AC100   Rask Ingemann Lambertsen
  • [v5,3/7] rtc: ac100: Add RTC driver for X-Powers AC100   Chen-Yu Tsai
    • [v5,3/7] rtc: ac100: Add RTC driver for X-Powers AC100   Rask Ingemann Lambertsen
• [PATCH V2 0/2] Add support for RK3288 Tinker board   Eddie Cai
  • [PATCH V2 1/2] dt-bindings: add Asus Tinker board   Eddie Cai
    • [PATCH V2 1/2] dt-bindings: add Asus Tinker board   Rob Herring
  • [PATCH V2 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Eddie Cai
    • [PATCH V2 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Andrew Lunn
      • [PATCH V2 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Eddie Cai
    • [PATCH V2 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Heiko Stuebner
      • [PATCH V2 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Eddie Cai
    • [PATCH V2 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Andy Yan
• [PATCH] irqchip/gicv3: Fix GICR_WAKE & GICD_IGROUPR accesses from non-secure   Shanker Donthineni
  • [PATCH] irqchip/gicv3: Fix GICR_WAKE & GICD_IGROUPR accesses from non-secure   Marc Zyngier
    • [PATCH] irqchip/gicv3: Fix GICR_WAKE & GICD_IGROUPR accesses from non-secure   Shanker Donthineni
• [PATCH v1 0/2] clk: rockchip: describe clk_gmac2io and clk_gmac2phy on rk3328   Elaine Zhang
  • [PATCH v1 1/2] rockchip: clk: rk3328: add clk_mac2io_ext ID   Elaine Zhang
  • [PATCH v1 2/2] clk: rockchip: describe clk_gmac using the new muxgrf type on rk3328   Elaine Zhang
    • [PATCH v1 2/2] clk: rockchip: describe clk_gmac using the new muxgrf type on rk3328   Heiko Stuebner
• [PATCH v4 1/3] dt: bindings: add documentation for zx2967 family i2c controller   Baoyou Xie
  • [PATCH v4 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Shawn Guo
    • [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Jun Nie
    • [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Andy Shevchenko
• [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver   Horng-Shyang Liao
  • [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver   Horng-Shyang Liao
  • [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver   Jassi Brar
    • [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver   Horng-Shyang Liao
      • [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver   Jassi Brar
      • [PATCH v20 2/4] mailbox: mediatek: Add Mediatek CMDQ driver   Horng-Shyang Liao
• [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
  • [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Marc Zyngier
    • [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
      • [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Marc Zyngier
      • [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
      • [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Marc Zyngier
      • [PATCH v5] PCI: Xilinx NWL: Modifying irq chip for legacy interrupts   Bharat Kumar Gogada
• [PATCH 2/6] usb: mtu3: add reference clock   Chunfeng Yun
• [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock   Chunfeng Yun
• [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC   Quentin Schulz
  • [PATCH v9 3/3] iio: adc: add support for Allwinner SoCs ADC   Jonathan Cameron
• [PATCH 1/2] staging: bcm2835-audio: Removed spaces before ')'   Abhijit Naik
  • [PATCH 2/2] staging: bcm2835-audio: Removed space after '('   Abhijit Naik
  • [PATCH 1/2] staging: bcm2835-audio: Removed spaces before ')'   Greg KH
• [RFC PATCH v6 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Benjamin Gaignard
  • [RFC PATCH v6 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Vladimir Murzin
  • [RFC PATCH v6 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Alexandre Torgue
    • [RFC PATCH v6 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Vladimir Murzin
  • [RFC PATCH v6 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Alexandre Torgue
    • [RFC PATCH v6 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Vladimir Murzin
• [PATCH 02/11] [media] s5p-mfc: Adding initial support for MFC v10.10   Smitha T Murthy
• [PATCH 1/8] include: dt-bindings: Add STM32H7 pinctrl DT bindings   Linus Walleij
• [PATCH 2/8] pinctrl: stm32: Add STM32H743 MCU support   Linus Walleij
• [PATCH] ARM: shmobile: r7s72100: Enable L2 cache   Geert Uytterhoeven
  • [PATCH] ARM: shmobile: r7s72100: Enable L2 cache   Chris Brandt
    • [PATCH] ARM: shmobile: r7s72100: Enable L2 cache   Geert Uytterhoeven
      • [PATCH] ARM: shmobile: r7s72100: Enable L2 cache   Chris Brandt
• [PATCH v2 2/2] mtd: nand: Update dependency of IFC for LS1021A   Boris Brezillon
  • [PATCH v2 2/2] mtd: nand: Update dependency of IFC for LS1021A   Alison Wang
• [PATCH v12 0/9] power: add power sequence library   Peter Chen
  • [PATCH v12 1/9] binding-doc: power: pwrseq-generic: add binding doc for generic power sequence library   Peter Chen
  • [PATCH v12 2/9] power: add power sequence library   Peter Chen
  • [PATCH v12 3/9] usb: separate out sysdev pointer from usb_bus   Peter Chen
    • [PATCH v12 3/9] usb: separate out sysdev pointer from usb_bus   Vivek Gautam
      • [PATCH v12 3/9] usb: separate out sysdev pointer from usb_bus   Peter Chen
  • [PATCH v12 4/9] usb: chipidea: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v12 5/9] usb: ehci: fsl: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
    • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Vivek Gautam
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
    • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Jack Pham
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Vivek Gautam
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Roger Quadros
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Roger Quadros
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Vivek Gautam
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
      • [PATCH v12 6/9] usb: xhci: use bus->sysdev for DMA configuration   Vivek Gautam
  • [PATCH v12 7/9] usb: ehci: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v12 8/9] binding-doc: usb: usb-device: add optional properties for power sequence   Peter Chen
  • [PATCH v12 9/9] usb: core: add power sequence handling for USB devices   Peter Chen
• [PATCH v2 1/6] usb: mtu3: get resources that cause deferred probe earlier   Chunfeng Yun
  • [PATCH v2 2/6] usb: mtu3: add reference clock   Chunfeng Yun
  • [PATCH v2 3/6] usb: xhci-mtk: add reference clock   Chunfeng Yun
  • [PATCH v2 4/6] arm64: dts: mt8173: add reference clock for usb   Chunfeng Yun
  • [PATCH v2 5/6] dt-bindings: mt8173-xhci: add reference clock   Chunfeng Yun
  • [PATCH v2 6/6] dt-bindings: mt8173-mtu3: add reference clock   Chunfeng Yun
    • [PATCH v2 6/6] dt-bindings: mt8173-mtu3: add reference clock   Chunfeng Yun
• [PATCH] ARM64: dts: meson-gxbb: set reset for ethernet   Neil Armstrong
  • [PATCH] ARM64: dts: meson-gxbb: set reset for ethernet   Heiner Kallweit
    • [PATCH] ARM64: dts: meson-gxbb: set reset for ethernet   Neil Armstrong
• [PATCH] mmc: meson-gx: add support for HS400 mode   Neil Armstrong
  • [PATCH] mmc: meson-gx: add support for HS400 mode   Heiner Kallweit
• [RFC PATCH] Memory hotplug support for arm64 platform   Andrea Reale
  • [RFC PATCH] Memory hotplug support for arm64 platform   Scott Branden
• Fractional divider on the Atmel USART controller   Romain Izard
  • Fractional divider on the Atmel USART controller   Ludovic Desroches
    • Fractional divider on the Atmel USART controller   Richard Genoud
      • Fractional divider on the Atmel USART controller   Ludovic Desroches
      • Fractional divider on the Atmel USART controller   Ludovic Desroches
    • Fractional divider on the Atmel USART controller   Romain Izard
      • Fractional divider on the Atmel USART controller   Romain Izard
  • Fractional divider on the Atmel USART controller   Richard Genoud
• IRQ masking hierarchy with GIC as the root   Lucas Stach
  • IRQ masking hierarchy with GIC as the root   Marc Zyngier
• [PATCH] Staging: bcm2835-audio: Fixed that open brace should be on previous line error in bcm2835-ctl.c   Victor Vaschenko
• [GIT PULL] Allwinner DT changes for 4.11, part 2   Maxime Ripard
  • [GIT PULL] Allwinner DT changes for 4.11, part 2   Arnd Bergmann
• [PATCH] Signed-off-by: Ran Algawi <ran.algawi at gmail.com>   Ran Algawi
  • [PATCH] Signed-off-by: Ran Algawi <ran.algawi at gmail.com>   Greg Kroah-Hartman
• [PATCH 2/2] arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA   Robert Richter
• [GIT PULL] ACPI IORT fixes for v4.10-rc8   Lorenzo Pieralisi
  • [GIT PULL] ACPI IORT fixes for v4.10-rc8   Will Deacon
• [PATCH v1 1/3] clk: zte: add i2s clocks for zx296718   Baoyou Xie
  • [PATCH v1 2/3] dt: Document for the ZTE zx296718 I2S controller   Baoyou Xie
    • [PATCH v1 2/3] dt: Document for the ZTE zx296718 I2S controller   Mark Brown
    • [PATCH v1 2/3] dt: Document for the ZTE zx296718 I2S controller   Rob Herring
  • [PATCH v1 3/3] ASoC: zx-i2s: support zx296718 SoC for ZTE's i2s controller driver   Baoyou Xie
    • [PATCH v1 3/3] ASoC: zx-i2s: support zx296718 SoC for ZTE's i2s controller driver   Mark Brown
• [PATCH] arm64: do not trace atomic operations   Pratyush Anand
• [xlnx:master 2187/2699] grep: include/linux/mali/mali_utgard_uk_types.h: No such file or directory   kbuild test robot
• [PATCH] i2c: at91: ensure state is restored after suspending   Ludovic Desroches
  • [PATCH] i2c: at91: ensure state is restored after suspending   Alexandre Belloni
• [PATCH 10/11] [media] v4l2: Add v4l2 control IDs for HEVC encoder   Andrzej Hajda
  • [PATCH 10/11] [media] v4l2: Add v4l2 control IDs for HEVC encoder   Smitha T Murthy
• [PATCH] arm64: Revert "arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y"   Ard Biesheuvel
  • [PATCH] arm64: Revert "arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y"   Will Deacon
• [PATCH] soc/imx: Add GPCv2 power gating driver   Andrey Smirnov
  • [PATCH] soc/imx: Add GPCv2 power gating driver   Rob Herring
    • [PATCH] soc/imx: Add GPCv2 power gating driver   Andrey Smirnov
• [PATCH] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
  • [PATCH] reset: Add i.MX7 SRC reset driver   Rob Herring
    • [PATCH] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
• [PATCH v3 0/3] i.MX7 PCI support   Andrey Smirnov
  • [PATCH v3 1/3] PCI: imx6: Fix a typo in error message   Andrey Smirnov
  • [PATCH v3 2/3] PCI: imx6: Allow probe deferal by reset GPIO   Andrey Smirnov
  • [PATCH v3 3/3] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
    • [PATCH v3 3/3] PCI: imx6: Add code to support i.MX7D   Lucas Stach
      • [PATCH v3 3/3] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
• [PATCH -next] ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()   Wei Yongjun
  • [PATCH -next] ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()   Maxime Ripard
  • Applied "ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()" to the asoc tree   Mark Brown
• [PATCH -next] clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()   Wei Yongjun
  • [PATCH -next] clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()   Stephen Boyd
• [PATCH] i2c: busses: constify i2c_algorithm structures   Ludovic Desroches
  • [PATCH] i2c: busses: constify i2c_algorithm structures   Wolfram Sang
• [PATCH -next] soc: zte: pm_domains: Remove redundant dev_err call in zx2967_pd_probe()   Wei Yongjun
• [PATCH -next] soc: zte: pm_domains: Remove .owner field for driver   Wei Yongjun
• [PATCH 0/7] arm64: efi: PE/COFF cleanup/hardening   Ard Biesheuvel
  • [PATCH 1/7] include: pe.h: allow for use in assembly   Ard Biesheuvel
    • [PATCH 1/7] include: pe.h: allow for use in assembly   Mark Rutland
      • [PATCH 1/7] include: pe.h: allow for use in assembly   Ard Biesheuvel
  • [PATCH 2/7] include: pe.h: add some missing definitions   Ard Biesheuvel
  • [PATCH 3/7] arm64: efi: move EFI header and related data to a separate .S file   Ard Biesheuvel
    • [PATCH 3/7] arm64: efi: move EFI header and related data to a separate .S file   Mark Rutland
      • [PATCH 3/7] arm64: efi: move EFI header and related data to a separate .S file   Ard Biesheuvel
  • [PATCH 4/7] arm64: efi: ensure that the PE/COFF header pointer appears at offset 0x3c   Ard Biesheuvel
    • [PATCH 4/7] arm64: efi: ensure that the PE/COFF header pointer appears at offset 0x3c   Mark Rutland
  • [PATCH 5/7] arm64: efi: remove pointless dummy .reloc section   Ard Biesheuvel
    • [PATCH 5/7] arm64: efi: remove pointless dummy .reloc section   Mark Rutland
    • [PATCH 5/7] arm64: efi: remove pointless dummy .reloc section   Peter Jones
  • [PATCH 6/7] arm64: efi: replace open coded constants with symbolic ones   Ard Biesheuvel
    • [PATCH 6/7] arm64: efi: replace open coded constants with symbolic ones   Mark Rutland
  • [PATCH 7/7] arm64: efi: split Image code and data into separate PE/COFF sections   Ard Biesheuvel
• [PATCH v2] irqchip/gicv3: Fix GICR_WAKE & GICD_IGROUPR accesses from non-secure   Shanker Donthineni
• [GIT PULL] arch timer updates for v4.11   Mark Rutland
  • [PATCH 1/4] arm64: arch_timer: add dt binding for hisilicon-161010101 erratum   Mark Rutland
  • [PATCH 2/4] arm64: arm_arch_timer: remove fsl-a008585 parameter   Mark Rutland
  • [PATCH 3/4] arm64: arch_timer: introduce generic errata handling infrastructure   Mark Rutland
  • [PATCH 4/4] arm64: arch_timer: work around Hisilicon erratum 161010101   Mark Rutland
  • [GIT PULL] arch timer updates for v4.11   Daniel Lezcano
• [GIT PULL] few omap late dts changes for v4.11 merge window   Tony Lindgren
  • [GIT PULL] few omap late dts changes for v4.11 merge window   Tony Lindgren
• [xlnx:master 2695/2699] drivers/fpga/zynqmp-fpga.c:60:2: error: implicit declaration of function '__flush_cache_user_range'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 136/148] lib/libio.c:27:21: error: dereferencing pointer to incomplete type   kbuild test robot
• [PATCH] drm/atmel-hlcdc: Simplify the HLCDC layer logic   Boris Brezillon
  • [PATCH] drm/atmel-hlcdc: Simplify the HLCDC layer logic   Daniel Vetter
  • [PATCH] drm/atmel-hlcdc: Simplify the HLCDC layer logic   Nicolas Ferre
• [hisi:topic-lpc-4.10-libio 136/148] lib/libio.c:80:13: error: dereferencing pointer to incomplete type 'struct acpi_resource'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 1/2] drivers/atm/iphase.h:127:0: warning: "isprint" redefined   kbuild test robot
• [hisi:topic-lpc-4.10-libio 1/2] arch/x86/boot/compressed/../ctype.h:4:19: error: redefinition of 'isdigit'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 139/148] drivers/of/address.c:330:3: error: implicit declaration of function 'address_to_pio'   kbuild test robot
• [PATCH v21 00/13] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer   fu.wei at linaro.org
  • [PATCH v21 01/13] clocksource: arm_arch_timer: introduce two functions to get the frequency from mmio and sysreg.   fu.wei at linaro.org
  • [PATCH v21 02/13] clocksource: arm_arch_timer: separate out device-tree code from arch_timer_detect_rate   fu.wei at linaro.org
  • [PATCH v21 03/13] clocksource: arm_arch_timer: remove arch_timer_detect_rate   fu.wei at linaro.org
  • [PATCH v21 04/13] clocksource: arm_arch_timer: split arch_timer_rate for different types of timer   fu.wei at linaro.org
  • [PATCH v21 05/13] clocksource: arm_arch_timer: refactor arch_timer_needs_probing   fu.wei at linaro.org
  • [PATCH v21 06/13] clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call   fu.wei at linaro.org
  • [PATCH v21 07/13] clocksource: arm_arch_timer: introduce some new structs to prepare for GTDT   fu.wei at linaro.org
  • [PATCH v21 08/13] clocksource: arm_arch_timer: refactor MMIO timer probing.   fu.wei at linaro.org
  • [PATCH v21 09/13] acpi/arm64: Add GTDT table parse driver   fu.wei at linaro.org
  • [PATCH v21 10/13] clocksource: arm_arch_timer: simplify ACPI support code.   fu.wei at linaro.org
  • [PATCH v21 11/13] acpi/arm64: Add memory-mapped timer support in GTDT driver   fu.wei at linaro.org
  • [PATCH v21 12/13] clocksource: arm_arch_timer: add GTDT support for memory-mapped timer   fu.wei at linaro.org
  • [PATCH v21 13/13] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver   fu.wei at linaro.org
  • [PATCH v21 00/13] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer   Fu Wei
• [hisi:topic-lpc-4.10-libio 137/148] lib/libio.c:94:36: error: passing argument 1 of 'acpi_libio_supported_resource' from incompatible pointer type   kbuild test robot
• [hisi:topic-lpc-4.10-libio 143/148] drivers/of/address.c:327:3: error: implicit declaration of function 'register_io_range_cpu'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 139/148] include/linux/list.h:463:43: error: dereferencing pointer to incomplete type 'struct io_range'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 134/148] arch/blackfin/kernel/module.c:7:40: error: 'mod' undeclared   kbuild test robot
• [hisi:topic-lpc-4.10-libio 48/148] drivers/scsi/hisi_sas/hisi_sas_main.c:459:4: warning: this 'if' clause does not guard...   kbuild test robot
• [hisi:topic-lpc-4.10-libio 138/148] undefined reference to `libio_inb'   kbuild test robot
• [PATCH 0/3] mtd: nand: sunxi: Perfs improvements   Boris Brezillon
• [xlnx:master 120/172] drivers/media/i2c/ad9389b.c:950:28: error: 'struct ad9389b_state' has no member named 'work_queue'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 137/148] drivers/bus/hisi_lpc.c:597:10: error: implicit declaration of function 'acpi_set_libio_resource'   kbuild test robot
• [PATCH linux-next] fixup! usb: gadget: udc: atmel: Update endpoint allocation scheme   cristian.birsan at microchip.com
  • [PATCH linux-next] fixup! usb: gadget: udc: atmel: Update endpoint allocation scheme   Greg KH
• [hisi:topic-lpc-4.10-libio 138/148] drivers/tty/serial/8250/8250_port.c:420: undefined reference to `libio_outb'   kbuild test robot
• [hisi:topic-lpc-4.10-libio 143/148] drivers/bus/hisi_lpc.c:569:8: error: implicit declaration of function 'register_io_range_bus'   kbuild test robot
• [RFC][PATCH 1/2] remoteproc: Reduce asynchronous request_firmware to auto-boot only   Bjorn Andersson
  • [RFC][PATCH 1/2] remoteproc: Reduce asynchronous request_firmware to auto-boot only   Sarangdhar Joshi
• [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
  • [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Mark Brown
    • [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matthias Reichl
      • [alsa-devel] [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matthias Reichl
    • [alsa-devel] [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
  • [PATCH v2] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
    • [PATCH v2] ASoC: bcm2835: Add 8 channel (multitrack) capability   Eric Anholt
    • [alsa-devel] [PATCH v2] ASoC: bcm2835: Add 8 channel (multitrack) capability   Charles Keepax
      • [alsa-devel] [PATCH v2] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
    • [PATCH v3] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH v3] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
    • [PATCH v4] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [PATCH v4] ASoC: bcm2835: Add 8 channel (multitrack) capability   Charles Keepax
      • [PATCH v4] ASoC: bcm2835: Add 8 channel (multitrack) capability   Florian Kauer
      • [PATCH v4] ASoC: bcm2835: Add 8 channel (multitrack) capability   Eric Anholt
  • [PATCH v5] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
  • [PATCH v5] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
  • [PATCH v6] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
    • [alsa-devel] [PATCH v6] ASoC: bcm2835: Add 8 channel (multitrack) capability   kbuild test robot
    • [PATCH v6] ASoC: bcm2835: Add 8 channel (multitrack) capability   Mark Brown
      • [alsa-devel] [PATCH v6] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH v6] ASoC: bcm2835: Add 8 channel (multitrack) capability   Mark Brown
  • [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
    • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matthias Reichl
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matthias Reichl
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matthias Reichl
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Emmanuel Fusté
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
      • [alsa-devel] [PATCH v8] ASoC: bcm2835: Add 8 channel (multitrack) capability   Matt Flax
• [PATCHv3 0/2] Hardening configs refactor/rename   Laura Abbott
  • [PATCHv3 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Laura Abbott
    • [PATCHv3 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Ingo Molnar
    • [PATCHv3 1/2] arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common   Heiko Carstens
  • [PATCHv3 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Laura Abbott
    • arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Jessica Yu
    • [PATCHv3 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Pavel Machek
      • [PATCHv3 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Kees Cook
      • [PATCHv3 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Helge Deller
      • [PATCHv3 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Mark Rutland
      • [PATCHv3 2/2] arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX   Ingo Molnar
  • [PATCHv3 0/2] Hardening configs refactor/rename   Kees Cook
• [PATCH v9 1/3] dt: bindings: add documentation for zx2967 family thermal sensor   Baoyou Xie
  • [PATCH v9 2/3] MAINTAINERS: add zx2967 thermal drivers to ARM ZTE architecture   Baoyou Xie
    • [PATCH v9 2/3] MAINTAINERS: add zx2967 thermal drivers to ARM ZTE architecture   Eduardo Valentin
      • [PATCH v9 2/3] MAINTAINERS: add zx2967 thermal drivers to ARM ZTE architecture   Shawn Guo
  • [PATCH v9 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v9 3/3] thermal: zx2967: add thermal driver for ZTE's zx2967 family   Mathieu Poirier
• [RFC/PATCH] arm64: Rename macro arguments to silence sparse   Stephen Boyd
  • [RFC/PATCH] arm64: Rename macro arguments to silence sparse   Stephen Boyd
    • [RFC/PATCH] arm64: Rename macro arguments to silence sparse   Luc Van Oostenryck
      • [RFC/PATCH] arm64: Rename macro arguments to silence sparse   Stephen Boyd
      • [RFC/PATCH] arm64: Rename macro arguments to silence sparse   Van Oostenryck Luc
• [PATCH] drm/rockchip: cdn-dp: fix cdn-dp complie warning   Mark Yao
  • [PATCH] drm/rockchip: cdn-dp: fix cdn-dp complie warning   Sean Paul
• [PATCH v2 1/3] clk: zte: add i2s clocks for zx296718   Baoyou Xie
  • [PATCH v2 2/3] dt: ASoC: zx-i2s: Document for the ZTE zx296718 I2S controller   Baoyou Xie
    • [PATCH v2 2/3] dt: ASoC: zx-i2s: Document for the ZTE zx296718 I2S controller   Shawn Guo
    • [PATCH v2 2/3] dt: ASoC: zx-i2s: Document for the ZTE zx296718 I2S controller   Mark Brown
  • [PATCH v2 3/3] ASoC: zx-i2s: support zx296718 SoC for ZTE's i2s controller driver   Baoyou Xie
    • [PATCH v2 3/3] ASoC: zx-i2s: support zx296718 SoC for ZTE's i2s controller driver   Shawn Guo
  • [PATCH v2 1/3] clk: zte: add i2s clocks for zx296718   Shawn Guo
• [PATCH 1/2] remoteproc: Introduce rproc_{start,stop}() functions   Sarangdhar Joshi
• [PATCH v3 1/2] irqchip/gicv3: Fix GICR_WAKE & GICD_IGROUPR accesses from non-secure   Shanker Donthineni
• [PATCH v3 2/2] irqchip/gicv3: Don't register PM notifier if GIC security is enabled   Shanker Donthineni
• [PATCH] arm64: dts: mediatek: add mt8176 device tree   Yidi Lin
  • [PATCH] arm64: dts: mediatek: add mt8176 device tree   Matthias Brugger
  • [PATCH v2 1/2] arm64: dts: mediatek: Factor out mt817x family device tree   Daniel Kurtz
    • [PATCH 2/2] arm64: dts: mediatek: Add mt8176 device tree   Daniel Kurtz
• [PATCH 0/4] drm/rockchip: switch to drm_mm for support arm64 iommu   Mark Yao
  • [PATCH 4/4] drm/rockchip: gem: fixup iommu_map_sg error path   Mark Yao
• [PATCH 1/4] drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain   Mark Yao
  • [PATCH 1/4] drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain   Tomasz Figa
    • [PATCH 1/4] drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain   Mark yao
• [PATCH 2/4] drm/rockchip: Use common IOMMU API to attach devices   Mark Yao
• [PATCH 3/4] drm/rockchip: gem: add mutex lock for drm mm   Mark Yao
• [PATCH -next 1/3] arm64: dts: mt8173: add reference clock for usb   Chunfeng Yun
  • [PATCH -next 3/3] usb: xhci-mtk: make the reference clock optional   Chunfeng Yun
• [PATCH -next 2/3] usb: mtu3: make the reference clock optional   Chunfeng Yun
• [PATCH v2, 6/6] dt-bindings: phy-mt65xx-usb: add support for new version phy   Chunfeng Yun
• [hisi:topic-lpc-4.10-libio 134/148] include/linux/list.h:463:43: error: dereferencing pointer to incomplete type 'struct acpi_device'   kbuild test robot
• [PATCH v4 1/2] perf tools arm64: Add support for generating bpf prologue   He Kuang
  • [PATCH v4 2/2] perf tools: Add missing newline in debug messages   He Kuang
  • [PATCH v4 1/2] perf tools arm64: Add support for generating bpf prologue   Will Deacon
    • [PATCH v4 1/2] perf tools arm64: Add support for generating bpf prologue   Arnaldo Carvalho de Melo
  • [PATCH v4 1/2] perf tools arm64: Add support for generating bpf prologue   Masami Hiramatsu
• [PATCH] [media] mtk-vcodec: fix build errors without DEBUG   Minghsiu Tsai
  • [PATCH] [media] mtk-vcodec: fix build errors without DEBUG   Daniel Kurtz
    • [PATCH] [media] mtk-vcodec: fix build errors without DEBUG   Minghsiu Tsai
• [PATCH v32 00/13] arm64: add kdump support   AKASHI Takahiro
  • [PATCH v32 01/13] memblock: add memblock_clear_nomap()   AKASHI Takahiro
  • [PATCH v32 02/13] memblock: add memblock_cap_memory_range()   AKASHI Takahiro
  • [PATCH v32 03/13] arm64: limit memory regions based on DT property, usable-memory-range   AKASHI Takahiro
  • [PATCH v32 04/13] arm64: kdump: reserve memory for crash dump kernel   AKASHI Takahiro
  • [PATCH v32 05/13] arm64: mm: allow for unmapping part of kernel mapping   AKASHI Takahiro
  • [PATCH v32 06/13] arm64: kdump: protect crash dump kernel memory   AKASHI Takahiro
    • [PATCH v32 06/13] arm64: kdump: protect crash dump kernel memory   James Morse
  • [PATCH v32 07/13] arm64: hibernate: preserve kdump image around hibernation   AKASHI Takahiro
    • [PATCH v32 07/13] arm64: hibernate: preserve kdump image around hibernation   James Morse
      • [PATCH v32 07/13] arm64: hibernate: preserve kdump image around hibernation   AKASHI Takahiro
  • [PATCH v32 08/13] arm64: kdump: implement machine_crash_shutdown()   AKASHI Takahiro
  • [PATCH v32 09/13] arm64: kdump: add VMCOREINFO's for user-space tools   AKASHI Takahiro
  • [PATCH v32 10/13] arm64: kdump: provide /proc/vmcore file   AKASHI Takahiro
  • [PATCH v32 11/13] arm64: kdump: enable kdump in defconfig   AKASHI Takahiro
  • [PATCH v32 12/13] Documentation: kdump: describe arm64 port   AKASHI Takahiro
  • [PATCH v32 13/13] Documentation: dt: chosen properties for arm64 kdump   AKASHI Takahiro
  • [PATCH v32 00/13] arm64: add kdump support   Pratyush Anand
• [PATCH] arm64: dts: Enable ir-spi in the tm2 and tm2e boards   Andi Shyti
  • [PATCH] arm64: dts: Enable ir-spi in the tm2 and tm2e boards   Krzysztof Kozlowski
• [PATCH v2 0/5] Broadcom SBA RAID support   Anup Patel
  • [PATCH v2 1/5] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position   Anup Patel
  • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
    • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Dan Williams
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Vinod Koul
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Dan Williams
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Dan Williams
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Dan Williams
      • [PATCH v2 2/5] async_tx: Handle DMA devices having support for fewer PQ coefficients   Anup Patel
  • [PATCH v2 3/5] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()   Anup Patel
  • [PATCH v2 4/5] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
  • [PATCH v2 5/5] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver   Anup Patel
• [PATCH v2 0/7] drm/rockchip: switch to drm_mm for support arm64 iommu   Mark Yao
  • [PATCH v2 2/7] drm/rockchip: Use common IOMMU API to attach devices   Mark Yao
  • [PATCH v2 4/7] drm/rockchip: gem: fixup iommu_map_sg error path   Mark Yao
  • [PATCH v2 6/7] drm/rockchip: Respect page offset in IOMMU mmap   Mark Yao
    • [PATCH v2 6/7] drm/rockchip: Respect page offset in IOMMU mmap   Thierry Reding
  • [PATCH v2 7/7] drm/rockchip: Call drm_gem_object_release() to destroy GEM base   Mark Yao
    • [PATCH v2 7/7] drm/rockchip: Call drm_gem_object_release() to destroy GEM base   Thierry Reding
      • [PATCH v2 7/7] drm/rockchip: Call drm_gem_object_release() to destroy GEM base   Tomasz Figa
  • [PATCH v2 0/7] drm/rockchip: switch to drm_mm for support arm64 iommu   Thierry Reding
    • [PATCH v2 0/7] drm/rockchip: switch to drm_mm for support arm64 iommu   Mark yao
  • [PATCH v2 0/7] drm/rockchip: switch to drm_mm for support arm64 iommu   Heiko Stübner
• [PATCH v2 1/7] drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain   Mark Yao
• [PATCH v2 3/7] drm/rockchip: gem: add mutex lock for drm mm   Mark Yao
  • [PATCH v2 3/7] drm/rockchip: gem: add mutex lock for drm mm   Thierry Reding
    • [PATCH v2 3/7] drm/rockchip: gem: add mutex lock for drm mm   Mark yao
• [PATCH v2 5/7] drm/rockchip: Fix the call to drm_gem_put_pages()   Mark Yao
• [PATCH] KVM: arm64: Increase number of memslots to 512   Linu Cherian
  • [PATCH] KVM: arm64: Increase number of memslots to 512   Marc Zyngier
  • [PATCH] KVM: arm64: Increase number of memslots to 512   Auger Eric
    • [PATCH] KVM: arm64: Increase number of memslots to 512   Linu Cherian
      • [PATCH 0/2] get rid of immrbar_virt_to_phys()   Christophe Leroy
      • [PATCH 0/2] get rid of immrbar_virt_to_phys()   Christophe Leroy
      • [PATCH 2/2] soc/fsl/qe: get rid of immrbar_virt_to_phys()   Christophe Leroy
      • [PATCH 2/2] soc/fsl/qe: get rid of immrbar_virt_to_phys()   Li Yang
      • [PATCH 0/2] get rid of immrbar_virt_to_phys()   David Miller
• [PATCH 1/2] net: ethernet: ucc_geth: fix MEM_PART_MURAM mode   Christophe Leroy
  • [PATCH 1/2] net: ethernet: ucc_geth: fix MEM_PART_MURAM mode   Christophe LEROY
  • [PATCH 1/2] net: ethernet: ucc_geth: fix MEM_PART_MURAM mode   Li Yang
• [hisi:topic-lpc-4.10-libio 1/2] arch/x86/boot/compressed/../ctype.h:14:9: sparse: Trying to use reserved word 'if' as identifier   kbuild test robot
• [PATCH] ARM: Kconfig: select GENERIC_CLOCKEVENTS_BROADCAST also on UP   Russell King - ARM Linux
• [PATCH v2 3/3] gpiolib: Add GPIO initialization   Uwe Kleine-König
  • [PATCH v2 3/3] gpiolib: Add GPIO initialization   Lothar Waßmann
    • [PATCH v2 3/3] gpiolib: Add GPIO initialization   Uwe Kleine-König
• [PATCH] staging: vc04_services: remove unused functions   Alexander Alemayhu
  • [PATCH] staging: vc04_services: remove unused functions   Dan Carpenter
    • [PATCH] staging: vc04_services: remove unused functions   Alexander Alemayhu
    • [PATCH] staging: vc04_services: remove unused functions   Eric Anholt
      • [PATCH] staging: vc04_services: remove unused functions   Dan Carpenter
      • [PATCH] staging: vc04_services: remove unused functions   Michael Zoran
    • [PATCH] staging: vc04_services: remove unused functions   Arnd Bergmann
      • [PATCH] staging: vc04_services: remove unused functions   Dan Carpenter
• [PATCH] arm64: uaccess: consistently check object sizes   Mark Rutland
  • [PATCH] arm64: uaccess: consistently check object sizes   Kees Cook
    • [PATCH] arm64: uaccess: consistently check object sizes   Mark Rutland
      • [PATCH] arm64: uaccess: consistently check object sizes   Kees Cook
• [PATCH 0/2] imx: Fix power-up on RTC alarm   Guy Shapiro
  • [PATCH 1/2] power: reset: syscon-poweroff: add a mask property   Guy Shapiro
    • [PATCH 2/2] ARM: dts: imx: update snvs-poweroff mask   Guy Shapiro
    • [PATCH 1/2] power: reset: syscon-poweroff: add a mask property   Rob Herring
• [PATCH 4.9 04/66] efi/fdt: Avoid FDT manipulation after ExitBootServices()   Greg Kroah-Hartman
• [xlnx:master 238/266] drivers/gpu/drm/xilinx/xilinx_drm_crtc.c:503:33: warning: comparison of constant '-517' with boolean expression is always false   kbuild test robot
• Tegra baseline test results for v4.10-rc7   Jon Hunter
• [PULL v2] ARM: DTS: Fix broken GICv2 register maps   Arnd Bergmann
• [GIT PULL] ARM: mvebu: dt for v4.11 (#3)   Arnd Bergmann
  • [GIT PULL] ARM: mvebu: dt for v4.11 (#3)   Gregory CLEMENT
  • [GIT PULL] ARM: mvebu: dt for v4.11 (#3)   Andrew Lunn
• [PATCH 00/10][v2] staging: fsl-mc: fixes and cleanups   laurentiu.tudor at nxp.com
  • [PATCH 01/10] staging: fsl-mc: drop root dprc counting   laurentiu.tudor at nxp.com
  • [PATCH 02/10] staging: fsl-mc: fix device ref counting   laurentiu.tudor at nxp.com
  • [PATCH 03/10] staging: fsl-mc: add device release callback   laurentiu.tudor at nxp.com
  • [PATCH 04/10] staging: fsl-mc: don't use devres api for refcounted objects   laurentiu.tudor at nxp.com
  • [PATCH 05/10] staging: fsl-mc: remove slab cache for mc devices   laurentiu.tudor at nxp.com
  • [PATCH 06/10] staging: fsl-mc: dpmcp: drop unused APIs   laurentiu.tudor at nxp.com
  • [PATCH 07/10] staging: fsl-mc: dpmng: drop unused prototype   laurentiu.tudor at nxp.com
  • [PATCH 08/10] staging: fsl-mc: dpbp: drop unused APIs   laurentiu.tudor at nxp.com
  • [PATCH 09/10] staging: fsl-mc: dpbp: add a few missing EXPORT_SYMBOL()s   laurentiu.tudor at nxp.com
  • [PATCH 10/10] staging: fsl-mc: dprc: drop unused APIs   laurentiu.tudor at nxp.com
  • [PATCH 00/10][v2] staging: fsl-mc: fixes and cleanups   Stuart Yoder
• i.MX7 clock support broken   Sascha Hauer
  • i.MX7 clock support broken   Shawn Guo
  • i.MX7 clock support broken   A.S. Dong
    • i.MX7 clock support broken   Frank Li
    • i.MX7 clock support broken   Andy Duan
      • i.MX7 clock support broken   Andrew Lunn
      • i.MX7 clock support broken   Sascha Hauer
      • i.MX7 clock support broken   A.S. Dong
    • i.MX7 clock support broken   Sascha Hauer
      • i.MX7 clock support broken   A.S. Dong
• [PATCH] ARM: ux500: cut some platform data   Arnd Bergmann
  • [PATCH] ARM: ux500: cut some platform data   Olof Johansson
    • [PATCH] ARM: ux500: cut some platform data   Linus Walleij
• [GIT PULL] Allwinner DT changes for 4.11   Arnd Bergmann
• [PATCH -next] [media] mtk-vcodec: remove redundant return value check of platform_get_resource()   Wei Yongjun
  • [PATCH -next] [media] mtk-vcodec: remove redundant return value check of platform_get_resource()   Tiffany Lin
• [GIT PULL] ARM: mvebu: soc for v4.11 (#2)   Arnd Bergmann
• [GIT PULL] Allwinner core changes for 4.11   Arnd Bergmann
• [PATCH v4] arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU   Geert Uytterhoeven
  • [PATCH v4] arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU   Robin Murphy
• [PATCH v3 00/10] staging: fsl-mc: fixes and cleanups   laurentiu.tudor at nxp.com
  • [PATCH v3 01/10] staging: fsl-mc: drop root dprc counting   laurentiu.tudor at nxp.com
  • [PATCH v3 02/10] staging: fsl-mc: fix device ref counting   laurentiu.tudor at nxp.com
  • [PATCH v3 03/10] staging: fsl-mc: add device release callback   laurentiu.tudor at nxp.com
  • [PATCH v3 04/10] staging: fsl-mc: don't use devres api for refcounted objects   laurentiu.tudor at nxp.com
  • [PATCH v3 05/10] staging: fsl-mc: remove slab cache for mc devices   laurentiu.tudor at nxp.com
  • [PATCH v3 06/10] staging: fsl-mc: dpmcp: drop unused APIs   laurentiu.tudor at nxp.com
  • [PATCH v3 07/10] staging: fsl-mc: dpmng: drop unused prototype   laurentiu.tudor at nxp.com
  • [PATCH v3 08/10] staging: fsl-mc: dpbp: drop unused APIs   laurentiu.tudor at nxp.com
  • [PATCH v3 09/10] staging: fsl-mc: dpbp: add a few missing EXPORT_SYMBOL()s   laurentiu.tudor at nxp.com
  • [PATCH v3 10/10] staging: fsl-mc: dprc: drop unused APIs   laurentiu.tudor at nxp.com
  • [PATCH v3 00/10] staging: fsl-mc: fixes and cleanups   Stuart Yoder
• [PATCH v4 0/3] i.MX7 PCI support   Andrey Smirnov
  • [PATCH v4 1/3] PCI: imx6: Fix a typo in error message   Andrey Smirnov
  • [PATCH v4 2/3] PCI: imx6: Allow probe deferal by reset GPIO   Andrey Smirnov
    • [PATCH v4 2/3] PCI: imx6: Allow probe deferal by reset GPIO   kbuild test robot
  • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
    • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Lucas Stach
    • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Lee Jones
    • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Rob Herring
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Bjorn Helgaas
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Rob Herring
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Bjorn Helgaas
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Lucas Stach
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Lucas Stach
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Rob Herring
      • [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D   Lucas Stach
  • [PATCH v4 0/3] i.MX7 PCI support   Bjorn Helgaas
• [linux-sunxi] Re: [PATCH v3 04/10] clk: sunxi-ng: add support for Allwinner H5 SoC   Maxime Ripard
• [PATCH -next] cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()   Wei Yongjun
  • [PATCH -next] cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()   Viresh Kumar
• [GIT PULL] Allwinner defconfig changes for 4.11   Arnd Bergmann
• [PATCH] media: imx: csi: fix crop rectangle reset in sink set_fmt   Philipp Zabel
• [PATCH 00/10] ARM: davinci: add vpif display support   Bartosz Golaszewski
  • [PATCH 01/10] media: dt-bindings: vpif: fix whitespace errors   Bartosz Golaszewski
    • [PATCH 01/10] media: dt-bindings: vpif: fix whitespace errors   Rob Herring
  • [PATCH 02/10] ARM: dts: da850-evm: fix whitespace errors   Bartosz Golaszewski
    • [PATCH 02/10] ARM: dts: da850-evm: fix whitespace errors   Kevin Hilman
    • [PATCH 02/10] ARM: dts: da850-evm: fix whitespace errors   Kevin Hilman
      • [PATCH 02/10] ARM: dts: da850-evm: fix whitespace errors   Kevin Hilman
      • [PATCH 02/10] ARM: dts: da850-evm: fix whitespace errors   Sekhar Nori
  • [PATCH 03/10] media: dt-bindings: vpif: extend the example with an output port   Bartosz Golaszewski
    • [PATCH 03/10] media: dt-bindings: vpif: extend the example with an output port   Rob Herring
    • [PATCH 03/10] media: dt-bindings: vpif: extend the example with an output port   Rob Herring
      • [PATCH 03/10] media: dt-bindings: vpif: extend the example with an output port   Laurent Pinchart
      • [PATCH 03/10] media: dt-bindings: vpif: extend the example with an output port   Bartosz Golaszewski
  • [PATCH 04/10] ARM: dts: da850-evm: add the output port to the vpif node   Bartosz Golaszewski
  • [PATCH 05/10] ARM: dts: da850: add vpif video display pins   Bartosz Golaszewski
  • [PATCH 06/10] ARM: davinci_all_defconfig: enable VPIF display modules   Bartosz Golaszewski
  • [PATCH 07/10] ARM: davinci: fix a whitespace error   Bartosz Golaszewski
    • [PATCH 07/10] ARM: davinci: fix a whitespace error   Kevin Hilman
      • [PATCH 07/10] ARM: davinci: fix a whitespace error   Kevin Hilman
  • [PATCH 08/10] ARM: davinci: fix the DT boot on da850-evm   Bartosz Golaszewski
    • [PATCH 08/10] ARM: davinci: fix the DT boot on da850-evm   Kevin Hilman
      • [PATCH 08/10] ARM: davinci: fix the DT boot on da850-evm   Sekhar Nori
      • [PATCH 08/10] ARM: davinci: fix the DT boot on da850-evm   Bartosz Golaszewski
      • [PATCH 08/10] ARM: davinci: fix the DT boot on da850-evm   Kevin Hilman
  • [PATCH 09/10] media: vpif: use a configurable i2c_adapter_id for vpif display   Bartosz Golaszewski
    • [PATCH 09/10] media: vpif: use a configurable i2c_adapter_id for vpif display   Kevin Hilman
  • [PATCH 10/10] ARM: davinci: add pdata-quirks for da850-evm vpif display   Bartosz Golaszewski
    • [PATCH 10/10] ARM: davinci: add pdata-quirks for da850-evm vpif display   Kevin Hilman
      • [PATCH 10/10] ARM: davinci: add pdata-quirks for da850-evm vpif display   Bartosz Golaszewski
    • [PATCH 10/10] ARM: davinci: add pdata-quirks for da850-evm vpif display   Kevin Hilman
  • [PATCH 00/10] ARM: davinci: add vpif display support   Sekhar Nori
    • [PATCH 00/10] ARM: davinci: add vpif display support   Bartosz Golaszewski
• [PATCH v2 0/3] ARM: l2c: add l2c support for RZ/A1   Chris Brandt
  • [PATCH v2 1/3] ARM: l2c: add pl310-no-sideband option   Chris Brandt
    • [PATCH v2 1/3] ARM: l2c: add pl310-no-sideband option   Rob Herring
      • [PATCH v2 1/3] ARM: l2c: add pl310-no-sideband option   Chris Brandt
  • [PATCH v2 2/3] ARM: shmobile: r7s72100: Enable L2 cache   Chris Brandt
  • [PATCH v2 3/3] ARM: dts: r7s72100: add l2 cache   Chris Brandt
• [PATCH] Add the Allwinner A31/A31s PWM driver.   lis8215 at gmail.com
• [PATCH v2 0/4] Add the Allwinner A31/A31s PWM driver   lis8215 at gmail.com
  • [PATCH v2 1/4] ARM: pwm: sun4i: unification of register operations for support sun6i.   lis8215 at gmail.com
    • [PATCH v2 1/4] ARM: pwm: sun4i: unification of register operations for support sun6i.   Maxime Ripard
      • [PATCH v2 1/4] ARM: pwm: sun4i: unification of register operations for support sun6i.   Maxime Ripard
  • [PATCH v2 2/4] ARM: pwm: sun4i: selectable prescaler table for support sun6i.   lis8215 at gmail.com
  • [PATCH v2 3/4] ARM: pwm: sun6i: add support the Allwinner A31 PWM.   lis8215 at gmail.com
    • [PATCH v2 3/4] ARM: pwm: sun6i: add support the Allwinner A31 PWM.   Maxime Ripard
    • [PATCH v2 3/4] ARM: pwm: sun6i: add support the Allwinner A31 PWM.   Rob Herring
  • [PATCH v2 4/4] ARM: dts: sun6i: Add the PWM block to the A31/A31s.   lis8215 at gmail.com
• [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
  • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Ard Biesheuvel
    • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Ard Biesheuvel
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   AKASHI, Takahiro
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Ard Biesheuvel
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   AKASHI, Takahiro
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Timur Tabi
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Timur Tabi
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
  • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
    • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
    • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Timur Tabi
      • [PATCH] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
• [PATCH v10] perf: add qcom l2 cache perf events driver   Neil Leeder
  • [PATCH v10] perf: add qcom l2 cache perf events driver   Mark Rutland
• [PATCH v4 0/9] Allwinner H5 and Orange Pi PC2 support   Icenowy Zheng
  • [PATCH v4 1/9] arm64: allwinner: Kconfig: add essential pinctrl driver for H5   Icenowy Zheng
  • [PATCH v4 2/9] clk: sunxi-ng: rename sun8i-h3 driver to sunxi-h3-h5   Icenowy Zheng
    • [PATCH v4 2/9] clk: sunxi-ng: rename sun8i-h3 driver to sunxi-h3-h5   Maxime Ripard
  • [PATCH v4 3/9] clk: sunxi-ng: add support for Allwinner H5 SoC   Icenowy Zheng
    • [PATCH v4 3/9] clk: sunxi-ng: add support for Allwinner H5 SoC   Maxime Ripard
  • [PATCH v4 4/9] ARM: dts: sun8i: convert H3 dtsi to use new sunxi-h3-h5 binding header   Icenowy Zheng
  • [PATCH v4 5/9] dt-bindings: remove transitional headers for Allwinner H3 CCU   Icenowy Zheng
    • [PATCH v4 5/9] dt-bindings: remove transitional headers for Allwinner H3 CCU   Maxime Ripard
  • [PATCH v4 6/9] arm: dts: sun8i: split Allwinner H3 .dtsi   Icenowy Zheng
  • [PATCH v4 7/9] ASoC: sunxi: allow the analog codec driver to be built on ARM64   Icenowy Zheng
  • [PATCH v4 8/9] arm64: dts: allwinner: add Allwinner H5 .dtsi   Icenowy Zheng
  • [PATCH v4 9/9] arm64: dts: sunxi: add support for the Orange Pi PC 2 board   Icenowy Zheng
• [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties   Sylvain Lemieux
  • [PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties   Rob Herring
• [PATCH] ARM: dts: imx6sx-udoo-neo: Fix reboot hang   Fabio Estevam
• [PATCHv2] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
  • [PATCHv2] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Jean-Jacques Hiblot
• [PATCH 0/3] A/C and Sound device tree nodes for LEGO MINDSTORMS EV3   David Lechner
  • [PATCH 1/3] ARM: da850-lego-ev3: Add device tree node for A/DC   David Lechner
  • [PATCH 3/3] ARM: da850-lego-ev3: Add device tree node for sound   David Lechner
  • [PATCH 0/3] A/C and Sound device tree nodes for LEGO MINDSTORMS EV3   Sekhar Nori
• [PATCH 2/3] ARM: davinci_all_defconfig: Enable TI ADS7950   David Lechner
• [PATCH 1/3] kprobes: introduce weak variant of kprobe_exceptions_notify   Naveen N. Rao
  • [PATCH 2/3] arm: kprobes: remove kprobe_exceptions_notify   Naveen N. Rao
  • [PATCH 3/3] powerpc: kprobes: remove kprobe_exceptions_notify()   Naveen N. Rao
    • [3/3] powerpc: kprobes: remove kprobe_exceptions_notify()   Michael Ellerman
  • [PATCH 1/3] kprobes: introduce weak variant of kprobe_exceptions_notify   Masami Hiramatsu
  • [PATCH 1/3] kprobes: introduce weak variant of kprobe_exceptions_notify   Michael Ellerman
    • [PATCH 1/3] kprobes: introduce weak variant of kprobe_exceptions_notify   Ingo Molnar
    • [PATCH 1/3] kprobes: introduce weak variant of kprobe_exceptions_notify   Naveen N. Rao
  • [1/3] kprobes: introduce weak variant of kprobe_exceptions_notify   Michael Ellerman
• [PATCH v2 0/6] Updates for Marvell Switch SoCs   Chris Packham
  • [PATCH v2 3/6] ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236   Chris Packham
  • [PATCH v2 6/6] clk: mvebu: Expand mv98dx3236-core-clock support   Chris Packham
    • [PATCH v2 6/6] clk: mvebu: Expand mv98dx3236-core-clock support   Stephen Boyd
  • [PATCH v2 0/6] Updates for Marvell Switch SoCs   Chris Packham
    • [PATCH v3 1/6] ARM: dts: Fix typo in armada-xp-98dx4251   Chris Packham
      • [PATCH v3 1/6] ARM: dts: Fix typo in armada-xp-98dx4251   Rob Herring
    • [PATCH v3 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes   Chris Packham
      • [PATCH v3 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes   Rob Herring
    • [PATCH v3 3/6] ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236   Chris Packham
    • [PATCH v3 5/6] ARM: mvebu: Add driver for mv98dx3236-soc-id   Chris Packham
      • [PATCH v3 5/6] ARM: mvebu: Add driver for mv98dx3236-soc-id   Arnd Bergmann
      • [PATCH v3 5/6] ARM: mvebu: Add driver for mv98dx3236-soc-id   Chris Packham
      • [PATCH v3 5/6] ARM: mvebu: Add driver for mv98dx3236-soc-id   Arnd Bergmann
      • [PATCH v3 5/6] ARM: mvebu: Add driver for mv98dx3236-soc-id   Chris Packham
    • [PATCH v3 6/6] ARM: dts: mvebu: Move mv98dx3236 clock bindings   Chris Packham
      • [PATCH v3 6/6] ARM: dts: mvebu: Move mv98dx3236 clock bindings   Rob Herring
• [PATCH v2 1/6] ARM: dts: Fix typo in armada-xp-98dx4251   Chris Packham
  • [PATCH v2 1/6] ARM: dts: Fix typo in armada-xp-98dx4251   Gregory CLEMENT
• [PATCH v2 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes   Chris Packham
  • [PATCH v2 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes   Rob Herring
• [PATCH v2 4/6] ARM: mvebu: Add mv98dx3236-soc-id   Chris Packham
  • [PATCH v2 4/6] ARM: mvebu: Add mv98dx3236-soc-id   Gregory CLEMENT
• [PATCH v2 5/6] ARM: dts: mvebu: Move mv98dx3236 clock bindings   Chris Packham
  • [PATCH v2 5/6] ARM: dts: mvebu: Move mv98dx3236 clock bindings   Rob Herring
• [PATCH] ARM: dts: imx6q-cm-fx6: add analog audio support   christopher.spinrath at rwth-aachen.de
  • [PATCH] ARM: dts: imx6q-cm-fx6: add analog audio support   Fabio Estevam
  • [PATCH] ARM: dts: imx6q-cm-fx6: add analog audio support   Christopher Spinrath
• [PATCH 1/3] dt-bindings: Document the dmas and dma-names properties for VC4 HDMI   Eric Anholt
  • [PATCH 2/3] drm/vc4: Add HDMI audio support   Eric Anholt
    • [PATCH 2/3] drm/vc4: Add HDMI audio support   Boris Brezillon
  • [PATCH 1/3] dt-bindings: Document the dmas and dma-names properties for VC4 HDMI   Rob Herring
• [PATCH 3/3] ARM: dts: bcm283x: Add HDMI audio related properties   Eric Anholt
• [RFC][PATCH] treewide: Move set_memory_* functions away from cacheflush.h   Laura Abbott
  • [RFC][PATCH] treewide: Move set_memory_* functions away from cacheflush.h   Kees Cook
    • [RFC][PATCH] treewide: Move set_memory_* functions away from cacheflush.h   Will Deacon
  • [RFC][PATCH] treewide: Move set_memory_* functions away from cacheflush.h   Ingo Molnar
  • [RFC][PATCH] treewide: Move set_memory_* functions away from cacheflush.h   Heiko Carstens
• [PATCH] ARM: dts: imx6ul-14x14-evk: Remove unnecessary node   Fabio Estevam
• [PATCH v2] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
  • [PATCH v2] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
  • [PATCH v2] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Robin Murphy
  • [PATCH v2] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Mark Rutland
    • [PATCH v2] efi/libstub/arm*: Set default address and size cells values for an empty dtb   Jeffrey Hugo
• [PATCH v3 0/5] Add Cavium ARCH_THUNDER2 platform   Jayachandran C
  • [PATCH v3 1/5] arm64: add THUNDER2 processor family   Jayachandran C
  • [PATCH v3 2/5] MAINTAINERS: Add Cavium ThunderX2 entry   Jayachandran C
  • [PATCH v3 3/5] arm64: dts: add device tree for ARCH_THUNDER2   Jayachandran C
  • [PATCH v3 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
    • [PATCH v3 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Rob Herring
      • [PATCH v3 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
      • [PATCH v3 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Arnd Bergmann
      • [PATCH v3 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
      • [PATCH v4 3/5] arm64: dts: add device tree for ARCH_THUNDER2   Jayachandran C
      • [PATCH v4 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
      • [PATCH v4 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Rob Herring
      • [PATCH v4 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
      • [PATCH v4 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Rob Herring
      • [PATCH v4 4/5] dt-bindings: arm64 ARCH_THUNDER2 platform documentation   Jayachandran C
  • [PATCH v3 5/5] arm64: add ARCH_THUNDER2 to defconfig   Jayachandran C
• [PATCH 12/22 v3] ARM: dts: add top-level DT bindings for Cortina Gemini   Linus Walleij
  • [PATCH 12/22 v3] ARM: dts: add top-level DT bindings for Cortina Gemini   Rob Herring
• [PATCH v2] somedriver: remove the initialization of static pointers.   AbdAllah-MEZITI
  • [PATCH v2] somedriver: remove the initialization of static pointers.   Florian Fainelli
• [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
  • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Jean-Jacques Hiblot
    • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Russell King - ARM Linux
  • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Russell King - ARM Linux
    • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Steven Rostedt
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Russell King - ARM Linux
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Steven Rostedt
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Steven Rostedt
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
    • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
    • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Jean-Jacques Hiblot
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Jean-Jacques Hiblot
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Russell King - ARM Linux
      • [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS   Abel Vesa
• [PATCH v3] staging: bcm2835-audio: Remove the initialization of static pointers.   AbdAllah-MEZITI
  • [PATCH v3] staging: bcm2835-audio: Remove the initialization of static pointers.   Greg KH
• [PATCH v6] arm64: Work around Falkor erratum 1003   Christopher Covington
  • [PATCH v6] arm64: Work around Falkor erratum 1003   Catalin Marinas
    • [PATCH v6] arm64: Work around Falkor erratum 1003   Christopher Covington
• [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
  • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
    • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
  • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Robin Murphy
    • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Mark Rutland
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Marc Zyngier
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
      • [PATCH 1/2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
• [PATCH 2/2] tty: pl011: Work around QDF2400 E44 for earlycon   Christopher Covington
  • [PATCH 2/2] tty: pl011: Work around QDF2400 E44 for earlycon   Timur Tabi
    • [PATCH 2/2] tty: pl011: Work around QDF2400 E44 for earlycon   Shanker Donthineni
      • [PATCH 2/2] tty: pl011: Work around QDF2400 E44 for earlycon   Christopher Covington
• [PATCH 0/9] arm64: dts: rockchip: support Google Kevin   Heiko Stuebner
  • [PATCH 0/9] arm64: dts: rockchip: support Google Kevin   Brian Norris
• linux-next: manual merge of the kspp tree with the arm-soc tree   Stephen Rothwell
• [PATCH v2] [media] mtk-vcodec: fix build errors without DEBUG   Minghsiu Tsai
• [PATCH v2 0/4] leds: add leds-mt6323 support on MT7623 SoC   sean.wang at mediatek.com
  • [PATCH v2 1/4] Documentation: devicetree: Add document bindings for leds-mt6323   sean.wang at mediatek.com
    • [PATCH v2 1/4] Documentation: devicetree: Add document bindings for leds-mt6323   Andrew Lunn
  • [PATCH v2 2/4] Documentation: devicetree: Add LED subnode binding for MT6323 PMIC   sean.wang at mediatek.com
    • [PATCH v2 2/4] Documentation: devicetree: Add LED subnode binding for MT6323 PMIC   Lee Jones
  • [PATCH v2 3/4] leds: Add LED support for MT6323 PMIC   sean.wang at mediatek.com
    • [PATCH v2 3/4] leds: Add LED support for MT6323 PMIC   Jacek Anaszewski
      • [PATCH v2 3/4] leds: Add LED support for MT6323 PMIC   Sean Wang
      • [PATCH v2 3/4] leds: Add LED support for MT6323 PMIC   Pavel Machek
      • [PATCH v2 3/4] leds: Add LED support for MT6323 PMIC   Jacek Anaszewski
  • [PATCH v2 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver   sean.wang at mediatek.com
    • [PATCH v2 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver   Lee Jones
• [PATCH v6 0/6] Rockchip dw-mipi-dsi driver   Chris Zhong
  • [PATCH v6 1/6] dt-bindings: add rk3399 support for dw-mipi-rockchip   Chris Zhong
  • [PATCH v6 2/6] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Chris Zhong
    • [PATCH v6 2/6] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Sean Paul
  • [PATCH v6 3/6] drm/rockchip/dsi: dw-mipi: correct the coding style   Chris Zhong
  • [PATCH v6 4/6] drm/rockchip/dsi: remove mode_valid function   Chris Zhong
  • [PATCH v6 5/6] dt-bindings: add power domain node for dw-mipi-rockchip   Chris Zhong
  • [PATCH v6 6/6] drm/rockchip/dsi: add dw-mipi power domain support   Chris Zhong
  • [PATCH v6 0/6] Rockchip dw-mipi-dsi driver   Sean Paul
• [PATCH v3 1/3] clk: zte: add i2s clocks for zx296718   Baoyou Xie
  • [PATCH v3 2/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Baoyou Xie
    • [PATCH v3 2/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Rob Herring
      • [PATCH v3 2/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Shawn Guo
      • [PATCH v3 2/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Mark Brown
      • [PATCH v3 2/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Rob Herring
  • [PATCH v3 3/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Baoyou Xie
    • [PATCH v3 3/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Shawn Guo
• [PATCH] thermal: mt8173: minor mtk_thermal.c cleanups   Dawei Chien
  • [PATCH] thermal: mt8173: minor mtk_thermal.c cleanups   Matthias Brugger
    • [PATCH] thermal: mt8173: minor mtk_thermal.c cleanups   Dawei Chien
      • [PATCH] thermal: mt8173: minor mtk_thermal.c cleanups   Eduardo Valentin
      • [PATCH] thermal: mt8173: minor mtk_thermal.c cleanups   Matthias Brugger
• [PATCH 1/2 v2] cpufreq: qoriq: added arm64 socs support   yuantian.tang at nxp.com
  • [PATCH 2/2 v2] cpufreq: qoriq: Don't look at clock implementation details   yuantian.tang at nxp.com
    • [PATCH 2/2 v2] cpufreq: qoriq: Don't look at clock implementation details   kbuild test robot
  • [PATCH 1/2 v2] cpufreq: qoriq: added arm64 socs support   kbuild test robot
    • [PATCH 1/2 v2] cpufreq: qoriq: added arm64 socs support   Rafael J. Wysocki
• [PATCH V2 0/2] KVM: arm64: Increase number of user memslots   linucherian at gmail.com
  • [PATCH V2 1/2] KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64   linucherian at gmail.com
    • [PATCH V2 1/2] KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64   Christoffer Dall
      • [PATCH V2 1/2] KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64   Linu Cherian
  • [PATCH V2 2/2] KVM: arm64: Increase number of user memslots to 508   linucherian at gmail.com
    • [PATCH V2 2/2] KVM: arm64: Increase number of user memslots to 508   Christoffer Dall
      • [PATCH V2 2/2] KVM: arm64: Increase number of user memslots to 508   Linu Cherian
• i.MX7 pinctrl driver writing to non existent registers   Sascha Hauer
  • i.MX7 pinctrl driver writing to non existent registers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v5 1/3] dt: bindings: add documentation for zx2967 family i2c controller   Baoyou Xie
• [PATCH v5 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v5 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v5 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Andy Shevchenko
• [PATCH v2 02/25] mfd: axp20x: correct name of temperature data ADC registers   Lee Jones
• [PATCH 1/8] dt-bindings: fix for Allwinner H5 pinctrl's compatible   Icenowy Zheng
  • [PATCH 2/8] dt: bindings: add binding for Allwinner A64 R_PIO pinctrl   Icenowy Zheng
    • [linux-sunxi] [PATCH 2/8] dt: bindings: add binding for Allwinner A64 R_PIO pinctrl   Chen-Yu Tsai
  • [PATCH 3/8] pinctrl: sunxi: Add A64 R_PIO controller support   Icenowy Zheng
    • [PATCH 3/8] pinctrl: sunxi: Add A64 R_PIO controller support   Linus Walleij
    • [linux-sunxi] [PATCH 3/8] pinctrl: sunxi: Add A64 R_PIO controller support   Chen-Yu Tsai
  • [PATCH 4/8] arm64: allwinner: select A64 R_PIO driver   Icenowy Zheng
  • [PATCH 5/8] arm64: dts: allwinner: add R_PIO node   Icenowy Zheng
    • [PATCH 5/8] arm64: dts: allwinner: add R_PIO node   Maxime Ripard
      • [PATCH 5/8] arm64: dts: allwinner: add R_PIO node   Icenowy Zheng
      • [PATCH 5/8] arm64: dts: allwinner: add R_PIO node   Maxime Ripard
  • [PATCH 6/8] arm64: dts: allwinner: add device node for R_PWM   Icenowy Zheng
    • [PATCH 6/8] arm64: dts: allwinner: add device node for R_PWM   Maxime Ripard
  • [PATCH 7/8] arm64: dts: allwinner: add pinmux for A64's r_pwm   Icenowy Zheng
  • [PATCH 8/8] arm64: dts: allwinner: add PWM node to A64 dtsi   Icenowy Zheng
    • [PATCH 8/8] arm64: dts: allwinner: add PWM node to A64 dtsi   Maxime Ripard
  • [linux-sunxi] [PATCH 1/8] dt-bindings: fix for Allwinner H5 pinctrl's compatible   Chen-Yu Tsai
• [PATCH] ARM: dts: imx53-qsb: Provide the TVE DAC regulators   Philipp Zabel
  • [PATCH] ARM: dts: imx53-qsb: Provide the TVE DAC regulators   Fabio Estevam
• [PATCH v2 7/8] mfd: exynos-lpass: Add missing remove() function   Lee Jones
• [PATCH v2 8/8] mfd: exynos-lpass: Add runtime PM support   Lee Jones
• [PATCH 0/3] ARM initrd updates   Russell King - ARM Linux
  • [PATCH 1/3] ARM: mm: move initrd init code out of arm_memblock_init()   Russell King
  • [PATCH 2/3] ARM: mm: clean up initrd initialisation   Russell King
  • [PATCH 3/3] ARM: mm: round the initrd reservation to page boundaries   Russell King
• [RFC v2 00/19] vITS save/restore   Eric Auger
  • [RFC v2 05/19] KVM: arm64: ITS: Implement vgic_its_has_attr_regs and attr_regs_access   Andre Przywara
    • [RFC v2 05/19] KVM: arm64: ITS: Implement vgic_its_has_attr_regs and attr_regs_access   Auger Eric
      • [RFC v2 05/19] KVM: arm64: ITS: Implement vgic_its_has_attr_regs and attr_regs_access   Andre Przywara
      • [RFC v2 05/19] KVM: arm64: ITS: Implement vgic_its_has_attr_regs and attr_regs_access   Auger Eric
  • [RFC v2 18/19] KVM: arm64: ITS: Device table save/restore   Auger Eric
• [PATCH v3 0/7] Pad retentions support for Exynos5433   Lee Jones
  • [PATCH v3 0/7] Pad retentions support for Exynos5433   Marek Szyprowski
• [PATCH v2 00/14] arm64+ARM: efi: PE/COFF cleanup/hardening   Ard Biesheuvel
• [PATCH v2 01/14] include: pe.h: allow for use in assembly   Ard Biesheuvel
• [PATCH v2 02/14] include: pe.h: add some missing definitions   Ard Biesheuvel
• [PATCH v2 03/14] arm64: efi: move EFI header and related data to a separate .S file   Ard Biesheuvel
  • [PATCH v2 03/14] arm64: efi: move EFI header and related data to a separate .S file   Mark Rutland
• [PATCH v2 04/14] arm64: efi: clean up Image header after PE header has been split off   Ard Biesheuvel
  • [PATCH v2 04/14] arm64: efi: clean up Image header after PE header has been split off   Mark Rutland
    • [PATCH v2 04/14] arm64: efi: clean up Image header after PE header has been split off   Ard Biesheuvel
• [PATCH v2 05/14] arm64: efi: remove forbidden values from the PE/COFF header   Ard Biesheuvel
  • [PATCH v2 05/14] arm64: efi: remove forbidden values from the PE/COFF header   Mark Rutland
    • [PATCH v2 05/14] arm64: efi: remove forbidden values from the PE/COFF header   Ard Biesheuvel
• [PATCH v2 06/14] arm64: efi: remove pointless dummy .reloc section   Ard Biesheuvel
• [PATCH v2 07/14] arm64: efi: replace open coded constants with symbolic ones   Ard Biesheuvel
  • [PATCH v2 07/14] arm64: efi: replace open coded constants with symbolic ones   Mark Rutland
• [PATCH v2 08/14] arm64: efi: split Image code and data into separate PE/COFF sections   Ard Biesheuvel
  • [PATCH v2 08/14] arm64: efi: split Image code and data into separate PE/COFF sections   Mark Rutland
    • [PATCH v2 08/14] arm64: efi: split Image code and data into separate PE/COFF sections   Ard Biesheuvel
• [PATCH v2 09/14] arm: compressed: put zImage header and EFI header in dedicated section   Ard Biesheuvel
• [PATCH v2 10/14] arm: efi: remove forbidden values from the PE/COFF header   Ard Biesheuvel
• [PATCH v2 11/14] arm: efi: remove pointless dummy .reloc section   Ard Biesheuvel
• [PATCH v2 12/14] arm: efi: replace open coded constants with symbolic ones   Ard Biesheuvel
• [PATCH v2 13/14] arm: efi: split zImage code and data into separate PE/COFF sections   Ard Biesheuvel
• [PATCH v2 14/14] arm: efi: add PE/COFF debug table to EFI header   Ard Biesheuvel
• [PATCH 1/4] phy: exynos4: Remove duplicated defines of PHY register defines   Lee Jones
• [PATCH 4/4] phy: exynos: Use one define for enable bit   Lee Jones
• [PATCH 2/4] phy: exynos5: Remove duplicated defines of PHY register defines   Lee Jones
• [PATCH] ARM: dts: imx53-qsb: Constrain the TVE DAC voltage   Fabio Estevam
• [PATCH net] net: thunderx: Fix PHY autoneg for SGMII QLM mode   sunil.kovvuri at gmail.com
  • [PATCH net] net: thunderx: Fix PHY autoneg for SGMII QLM mode   David Miller
• [PATCH] arm64: Add support for VMID aware PIPT instruction cache cache   Shanker Donthineni
• [PATCH] security/keys: add CONFIG_KEYS_COMPAT to Kconfig   Bilal Amarni
  • [PATCH] security/keys: add CONFIG_KEYS_COMPAT to Kconfig   Arnd Bergmann
• [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform   Hans Ulli Kroll
  • [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform   Linus Walleij
  • [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform   Linus Walleij
    • [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform   Hans Ulli Kroll
      • [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform   John Feng-Hsin Chiang(江峰興)
      • [PATCH 00/22] Conversion of ARMv4 Gemini to DT and multiplatform   Hans Ulli Kroll
• [PATCH] crypto: arm/aes-ce: assign err return conditionally   Nicholas Mc Guire
  • [PATCH] crypto: arm/aes-ce: assign err return conditionally   Herbert Xu
    • [PATCH] crypto: arm/aes-ce: assign err return conditionally   Nicholas Mc Guire
• [PATCH 2/2 v3] irqchip: add a driver for Cortina Gemini   Marc Zyngier
• imx6: enet: clock selection (ref/ptp)   Stephan Bauroth
  • imx6: enet: clock selection (ref/ptp)   Andy Duan
• [BUGFIX PATCH tip/master 2/3] kprobes/arm64: Fix a possible deadlock case in kretprobe   Will Deacon
  • [BUGFIX PATCH tip/master 2/3] kprobes/arm64: Fix a possible deadlock case in kretprobe   Masami Hiramatsu
• [PATCH -next] reset: uniphier: fix non static symbol warnings   Wei Yongjun
  • [PATCH -next] reset: uniphier: fix non static symbol warnings   Masahiro Yamada
    • [PATCH -next] reset: uniphier: fix non static symbol warnings   Philipp Zabel
• [PATCH v3 06/10] arm64: efi: add EFI stub   Timur Tabi
  • [PATCH v3 06/10] arm64: efi: add EFI stub   Ard Biesheuvel
    • [PATCH v3 06/10] arm64: efi: add EFI stub   Timur Tabi
      • [PATCH v3 06/10] arm64: efi: add EFI stub   Mark Rutland
      • [PATCH v3 06/10] arm64: efi: add EFI stub   Jeffrey Hugo
      • [PATCH v3 06/10] arm64: efi: add EFI stub   Jeffrey Hugo
      • [PATCH v3 06/10] arm64: efi: add EFI stub   Mark Rutland
      • [PATCH v3 06/10] arm64: efi: add EFI stub   Ard Biesheuvel
• [PATCH 0/2] PM / Domains: Updates to IRQ safe PM domains   Lina Iyer
• [PATCH] PM / Domains: Fix compatible for domain idle state   Lina Iyer
  • [PATCH] PM / Domains: Fix compatible for domain idle state   Lina Iyer
• [PATCH 1/2] PM / Domains: Ignore domain-idle-states that are not compatible   Lina Iyer
  • [PATCH 1/2] PM / Domains: Ignore domain-idle-states that are not compatible   Ulf Hansson
• [PATCH 2/2] PM / Domains: Support in context powering off parent domain   Lina Iyer
  • [PATCH 2/2] PM / Domains: Support in context powering off parent domain   Ulf Hansson
    • [PATCH 2/2] PM / Domains: Support in context powering off parent domain   Ulf Hansson
• [GIT PULL] ARM: SoC fixes   Arnd Bergmann
• [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Chris Brandt
  • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Russell King - ARM Linux
    • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Geert Uytterhoeven
      • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Russell King - ARM Linux
      • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Geert Uytterhoeven
      • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Russell King - ARM Linux
    • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Chris Brandt
      • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Russell King - ARM Linux
      • [PATCH] ARM: xip: disable PATCH_PHYS_VIRT for ARCH_MULTIPLATFORM when XIP   Chris Brandt
• next-20170208 build: 1 failures 16 warnings (next-20170208)   Mark Brown
  • next-20170208 build: 1 failures 16 warnings (next-20170208)   Luis R. Rodriguez
• [V2] PCI: enable extended tags support for PCIe devices   Sinan Kaya
• Applied "ASoC: sunxi: allow the analog codec driver to be built on ARM64" to the asoc tree   Mark Brown
• [QUESTION] Early Write Acknowledge for PCIe configuration space   Lorenzo Pieralisi
  • [QUESTION] Early Write Acknowledge for PCIe configuration space   Will Deacon
  • [QUESTION] Early Write Acknowledge for PCIe configuration space   Gabriele Paoloni
    • [QUESTION] Early Write Acknowledge for PCIe configuration space   Lorenzo Pieralisi
      • [QUESTION] Early Write Acknowledge for PCIe configuration space   Gabriele Paoloni
• [PATCH 09/22 v2] mtd: add DT bindings for the Cortina Systems Gemini Flash   Brian Norris
• [PATCH v2] ARM: dts: sun8i: Add dts file for NanoPi NEO Air   Jelle van der Waa
  • [PATCH v2] ARM: dts: sun8i: Add dts file for NanoPi NEO Air   Maxime Ripard
• [PATCH v7] arm64: Work around Falkor erratum 1003   Christopher Covington
  • [PATCH v7] arm64: Work around Falkor erratum 1003   Catalin Marinas
• [PATCH 0/2] ARM: dts: BCM5301X: bugfixes   Jon Mason
  • [PATCH 1/2] ARM: dts: BCM5301X: Fix UARTs on bcm953012k   Jon Mason
  • [PATCH 2/2] ARM: dts: BCM5301X: Fix memory start address   Jon Mason
• [PATCH v2] ARM: dts: imx6q-cm-fx6: add analog audio support   christopher.spinrath at rwth-aachen.de
• [PATCH 0/2] ARM: dts: BCM5301X: QSPI and NAND   Jon Mason
  • [PATCH 1/2] ARM: dts: BCM5301X: Add NAND entries to bcm953012k   Jon Mason
    • [PATCH 1/2] ARM: dts: BCM5301X: Add NAND entries to bcm953012k   Florian Fainelli
  • [PATCH 2/2] ARM: dts: BCM5301X: convert to iProc QSPI   Jon Mason
• [PATCH] PCI: iproc: fix resource allocation for BCMA PCIe   Bjorn Helgaas
  • [PATCH] PCI: iproc: fix resource allocation for BCMA PCIe   Abylay Ospan
    • [PATCH] PCI: iproc: fix resource allocation for BCMA PCIe   Bjorn Helgaas
      • [PATCH] PCI: iproc: fix resource allocation for BCMA PCIe   Abylay Ospan
• [PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation   Shanker Donthineni
  • [PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation   Catalin Marinas
    • [PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation   Will Deacon
• [PATCH] [net-next] ARM: orion: remove unused wnr854t_switch_plat_data   Arnd Bergmann
  • [PATCH] [net-next] ARM: orion: remove unused wnr854t_switch_plat_data   Florian Fainelli
  • [PATCH] [net-next] ARM: orion: remove unused wnr854t_switch_plat_data   David Miller
• [PATCH v4 1/2] irqchip/gicv3: Fix GICR_WAKE & GICD_IGROUPR accesses from non-secure   Shanker Donthineni
  • [PATCH v4 2/2] irqchip/gicv3: Don't register PM notifier if GIC security is enabled   Shanker Donthineni
• [PATCH 0/2] PCI: iproc: MPS fix and quirks   Bjorn Helgaas
  • [PATCH 0/2] PCI: iproc: MPS fix and quirks   Jon Mason
• [PATCH 1/4] ARM: sunxi_defconfig: Enable AC100 RTC driver   Rask Ingemann Lambertsen
  • [PATCH 2/4] ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-in   Rask Ingemann Lambertsen
    • [PATCH 2/4] ARM: multi_v7_defconfig: Switch sunxi RSB driver from module to built-in   Maxime Ripard
  • [PATCH 3/4] ARM: multi_v7_defconfig: Enable AC100 RTC driver   Rask Ingemann Lambertsen
    • [PATCH 3/4] ARM: multi_v7_defconfig: Enable AC100 RTC driver   Maxime Ripard
  • [PATCH 4/4] ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in   Rask Ingemann Lambertsen
    • [PATCH 4/4] ARM: multi_v7_defconfig: Switch AXP20x driver from module to built-in   Maxime Ripard
  • [PATCH 1/4] ARM: sunxi_defconfig: Enable AC100 RTC driver   Maxime Ripard
• [PATCH v1 0/3] PCI: Configure PCIe MPS settings   Bjorn Helgaas
  • [PATCH v1 1/3] PCI: xilinx: Configure PCIe MPS settings   Bjorn Helgaas
  • [PATCH v1 2/3] PCI: versatile: Configure PCIe MPS settings   Bjorn Helgaas
  • [PATCH v1 3/3] PCI: xgene: Configure PCIe MPS settings   Bjorn Helgaas
  • [PATCH v1 0/3] PCI: Configure PCIe MPS settings   Bjorn Helgaas
    • [PATCH v1 1/3] PCI: xilinx: Configure PCIe MPS settings   Bjorn Helgaas
      • [PATCH v1 1/3] PCI: xilinx: Configure PCIe MPS settings   Christoph Hellwig
      • [PATCH v1 1/3] PCI: xilinx: Configure PCIe MPS settings   Bjorn Helgaas
    • [PATCH v1 2/3] PCI: versatile: Configure PCIe MPS settings   Bjorn Helgaas
    • [PATCH v1 3/3] PCI: xgene: Configure PCIe MPS settings   Bjorn Helgaas
    • [PATCH v1 0/3] PCI: Configure PCIe MPS settings   KY Srinivasan
    • [PATCH v1 0/3] PCI: Configure PCIe MPS settings   Bjorn Helgaas
      • [PATCH v1 0/3] PCI: Configure PCIe MPS settings   Dexuan Cui
      • [PATCH v1 0/3] PCI: Configure PCIe MPS settings   Bjorn Helgaas
      • [PATCH v1 0/3] PCI: Configure PCIe MPS settings   Dexuan Cui
• [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v3)   Eric Anholt
• [PATCH 04/10] clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock   Daniel Lezcano
• [PATCH 06/10] clocksource/drivers/ostm: Add renesas-ostm timer driver   Daniel Lezcano
• [PATCH 08/10] clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter   Daniel Lezcano
• [PATCH 09/10] clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure   Daniel Lezcano
• [PATCH 10/10] clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101   Daniel Lezcano
• [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Jon Mason
  • [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Rafał Miłecki
    • [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Jon Mason
      • [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Rafał Miłecki
      • [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Jon Mason
      • [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Florian Fainelli
      • [PATCH] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Rafał Miłecki
• [PATCH v2 0/5] arm: sun9i: Support AXP808 PMIC and Sunchip CX-A99 board   Rask Ingemann Lambertsen
  • [PATCH v2 1/5] dts: mfd: axp20x: Add AXP806 to list of current AXP20x family members   Rask Ingemann Lambertsen
  • [PATCH v2 2/5] dts: mfd: axp20x: Add binding for the AXP808   Rask Ingemann Lambertsen
  • [PATCH v2 3/5] mfd: axp20x: Add support for the AXP808 PMIC   Rask Ingemann Lambertsen
  • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Rask Ingemann Lambertsen
    • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Maxime Ripard
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Chen-Yu Tsai
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Rask Ingemann Lambertsen
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Rask Ingemann Lambertsen
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Maxime Ripard
      • AXP808 vs. AXP806 debugged, no difference? (Was: [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board)   Rask Ingemann Lambertsen
      • AXP808 vs. AXP806 debugged, no difference? (Was: [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board)   Chen-Yu Tsai
      • AXP808 vs. AXP806 debugged, no difference? (Was: [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board)   Rask Ingemann Lambertsen
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Rask Ingemann Lambertsen
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Chen-Yu Tsai
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Maxime Ripard
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Rask Ingemann Lambertsen
      • [PATCH v6 5/5] ARM: dts: sun9i: Initial support for the Sunchip CX-A99 board   Maxime Ripard
  • [RESEND PATCH v2 4/5] regulator: axp20x: Add support for the AXP808 PMIC   Rask Ingemann Lambertsen
• [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Rafał Miłecki
  • [PATCH for-4.11 2/2] Revert "dt-bindings: phy: Add documentation for NSP USB3 PHY"   Rafał Miłecki
    • [PATCH for-4.11 2/2] Revert "dt-bindings: phy: Add documentation for NSP USB3 PHY"   Jon Mason
    • [PATCH for-4.11 2/2] Revert "dt-bindings: phy: Add documentation for NSP USB3 PHY"   Rob Herring
  • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Florian Fainelli
  • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Jon Mason
  • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Rafał Miłecki
    • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Florian Fainelli
      • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Rafał Miłecki
      • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Florian Fainelli
      • [PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"   Jon Mason
• [PATCH v2] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Jon Mason
  • [PATCH v2] MAINTAINERS: Add Jon Mason to BCM5301X maintainers   Hauke Mehrtens
• [PATCH -next] rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()   Wei Yongjun
  • [PATCH -next] rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()   Maxime Ripard
  • [PATCH -next] rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()   Alexandre Belloni
• [PATCH] ARM: dts: socfpga: sodia: enable qspi   Nobuhiro Iwamatsu
  • [PATCH] ARM: dts: socfpga: sodia: enable qspi   Dinh Nguyen
• [PATCH] arm64: use linux/sizes.h for constants   Miles Chen
• [PATCH v6 3/3] arm: dts: mt2701: Add node for Mediatek JPEG Decoder   Rick Chang
  • [PATCH v6 3/3] arm: dts: mt2701: Add node for Mediatek JPEG Decoder   Hans Verkuil
• [PATCH] arm64: use is_vmalloc_addr   Miles Chen
  • [PATCH] arm64: use is_vmalloc_addr   kbuild test robot
    • [PATCH] arm64: use is_vmalloc_addr   Miles Chen
• [PATCH 1/2 v3] cpufreq: qoriq: added arm64 socs support   yuantian.tang at nxp.com
  • [PATCH 2/2 v3] cpufreq: qoriq: Don't look at clock implementation details   yuantian.tang at nxp.com
• [PATCH v4 1/3] clk: zte: add i2s clocks for zx296718   Baoyou Xie
  • [PATCH v4 2/3] ASoC: zx-i2s: Add the info of pclk to the binding document for zx2967 family   Baoyou Xie
    • [PATCH v4 2/3] ASoC: zx-i2s: Add the info of pclk to the binding document for zx2967 family   Mark Brown
      • [PATCH v4 2/3] ASoC: zx-i2s: Add the info of pclk to the binding document for zx2967 family   Shawn Guo
    • Applied "ASoC: zx-i2s: Add the info of pclk to the binding document for zx2967 family" to the asoc tree   Mark Brown
  • [PATCH v4 3/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Baoyou Xie
    • [PATCH v4 3/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Shawn Guo
    • [PATCH v4 3/3] ASoC: zx-i2s: introduce pclk for zx2967 family   Jun Nie
    • Applied "ASoC: zx-i2s: introduce pclk for zx2967 family" to the asoc tree   Mark Brown
  • [PATCH v4 1/3] clk: zte: add i2s clocks for zx296718   Shawn Guo
  • [PATCH v4 1/3] clk: zte: add i2s clocks for zx296718   Stephen Boyd
• irqchip/gic: avoid magic irq number   Mars Cheng
• [PATCH 0/2] ARM: ARMv7 (with MMU) XIP without ARCH_MULTIPLATFORM   Chris Brandt
  • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Chris Brandt
    • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Florian Fainelli
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Chris Brandt
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Florian Fainelli
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Chris Brandt
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Arnd Bergmann
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Chris Brandt
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Arnd Bergmann
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Russell King - ARM Linux
      • [PATCH 1/2] ARM: add ARM_SINGLE_ARMV7 as config option   Arnd Bergmann
  • [PATCH 2/2] ARM: shmobile: add renesas soc as a top level selection   Chris Brandt
• [PATCH 1/2] arm64: dts: added ecc register address to sata node on ls1043a   yuantian.tang at nxp.com
  • [PATCH 2/2] arm64: dts: added ecc register address to sata node on ls1046a   yuantian.tang at nxp.com
• [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Jiancheng Xue
  • [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Rob Herring
    • [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Jiancheng Xue
      • [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Rob Herring
  • [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Jiancheng Xue
  • [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Andreas Färber
    • [PATCH] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Jiancheng Xue
• [PATCH v4 0/9] ARM: dts: support I2SE Duckbill devices   Michael Heimpold
  • [PATCH v4 2/9] ARM: dts: imx28: rename mmc2_sck_cfg   Michael Heimpold
  • [PATCH v4 3/9] ARM: dts: imx28: add alternative muxing for mmc2_sck_cfg   Michael Heimpold
  • [PATCH v4 5/9] dt-bindings: arm: add entries for I2SE boards   Michael Heimpold
    • [PATCH v4 5/9] dt-bindings: arm: add entries for I2SE boards   Rob Herring
  • [PATCH v4 6/9] ARM: dts: add support for I2SE Duckbill 2 boards   Michael Heimpold
  • [PATCH v4 7/9] ARM: dts: add support for I2SE Duckbill 2 485   Michael Heimpold
  • [PATCH v4 8/9] ARM: dts: add support for I2SE Duckbill 2 EnOcean   Michael Heimpold
  • [PATCH v4 9/9] ARM: dts: add support for I2SE Duckbill 2 SPI   Michael Heimpold
  • [PATCH v4 0/9] ARM: dts: support I2SE Duckbill devices   Stefan Wahren
• [PATCH v4 1/9] ARM: dts: imx28: add alternative pinmuxing for mmc2   Michael Heimpold
• [PATCH v4 4/9] ARM: dts: imx28-duckbill: update to match vendor distributed DT   Michael Heimpold
• [PATCH v2 0/9] Fix issues and factorize arm/arm64 capacity information code   Juri Lelli
  • [PATCH v2 2/9] Documentation/ABI: add information about cpu_capacity   Juri Lelli
  • [PATCH v2 3/9] arm: fix return value of parse_cpu_capacity   Juri Lelli
  • [PATCH v2 4/9] arm: remove wrong CONFIG_PROC_SYSCTL ifdef   Juri Lelli
  • [PATCH v2 5/9] arm64: remove wrong CONFIG_PROC_SYSCTL ifdef   Juri Lelli
  • [PATCH v2 6/9] arm, arm64: factorize common cpu capacity default code   Juri Lelli
    • [PATCH v2 6/9] arm, arm64: factorize common cpu capacity default code   Greg KH
      • [PATCH v2 6/9] arm, arm64: factorize common cpu capacity default code   Rob Herring
      • [PATCH v2 6/9] arm, arm64: factorize common cpu capacity default code   Greg KH
  • [PATCH v2 7/9] arm,arm64,drivers: reduce scope of cap_parsing_failed   Juri Lelli
  • [PATCH v2 8/9] arm,arm64,drivers: move externs in a new header file   Juri Lelli
  • [PATCH v2 9/9] arm, arm64, drivers: add a prefix to drivers arch_topology interfaces   Juri Lelli
• [PATCH v2 1/9] Documentation: arm: fix wrong reference number in DT definition   Juri Lelli
• [PATCH v6 1/3] dt: bindings: add documentation for zx2967 family i2c controller   Baoyou Xie
  • [PATCH v6 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Andy Shevchenko
    • [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Jun Nie
      • [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Andy Shevchenko
• Aarch64 kernel with 32bit userspace question   Marek Vasut
  • Aarch64 kernel with 32bit userspace question   Jisheng Zhang
    • Aarch64 kernel with 32bit userspace question   Marek Vasut
      • Aarch64 kernel with 32bit userspace question   Jisheng Zhang
  • Aarch64 kernel with 32bit userspace question   Ard Biesheuvel
    • Aarch64 kernel with 32bit userspace question   Marek Vasut
      • Aarch64 kernel with 32bit userspace question   Ard Biesheuvel
      • Aarch64 kernel with 32bit userspace question   Russell King - ARM Linux
      • Aarch64 kernel with 32bit userspace question   Marek Vasut
      • Aarch64 kernel with 32bit userspace question   Arnd Bergmann
      • Aarch64 kernel with 32bit userspace question   Marek Vasut
• [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
  • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
  • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Jeffrey Hugo
    • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Jeffrey Hugo
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Jeffrey Hugo
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Jeffrey Hugo
      • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
  • [PATCH] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ruigrok, Richard
• [PATCH 0/2] ARM: shmobile: Remove ARCH_SHMOBILE_MULTI   Geert Uytterhoeven
  • [PATCH 1/2] ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS   Geert Uytterhoeven
  • [PATCH 0/2] ARM: shmobile: Remove ARCH_SHMOBILE_MULTI   Simon Horman
    • [PATCH 0/2] ARM: shmobile: Remove ARCH_SHMOBILE_MULTI   Chris Brandt
      • [PATCH 0/2] ARM: shmobile: Remove ARCH_SHMOBILE_MULTI   Simon Horman
• [PATCH 2/2] ARM: shmobile: Remove ARCH_SHMOBILE_MULTI   Geert Uytterhoeven
• [PATCH 1/3] dt-bindings: clockgen: Add compatible string for LS1088A   Harninder Rai
  • [PATCH 1/3] dt-bindings: clockgen: Add compatible string for LS1088A   Rob Herring
• [PATCH 2/3] Documentation: DT: Add entry for FSL LS1088A RDB, QDS boards   Harninder Rai
  • [PATCH 2/3] Documentation: DT: Add entry for FSL LS1088A RDB, QDS boards   Rob Herring
    • [PATCH 2/3] Documentation: DT: Add entry for FSL LS1088A RDB, QDS boards   Harninder Rai
• [PATCH 3/3] arm64: dts: Add support for FSL's LS1088A SoC   Harninder Rai
• [PATCH 09/11] iommu/mediatek: Make use of iommu_device_register interface   Joerg Roedel
• [PATCH 10/11] iommu/exynos: Make use of iommu_device_register interface   Joerg Roedel
  • [PATCH 10/11] iommu/exynos: Make use of iommu_device_register interface   Marek Szyprowski
    • [PATCH 10/11] iommu/exynos: Make use of iommu_device_register interface   Joerg Roedel
• [PATCH 11/11] iommu: Remove iommu_register_instance interface   Joerg Roedel
• [PATCH v2] arm64: use is_vmalloc_addr   Miles Chen
  • [PATCH v2] arm64: use is_vmalloc_addr   Andreas Färber
    • [PATCH v2] arm64: use is_vmalloc_addr   Miles Chen
• [PATCH 0/4] kuser updates for ARM-only vs Thumb   Russell King - ARM Linux
  • [PATCH 1/4] ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support   Russell King
    • [PATCH 1/4] ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support   Stephen Boyd
  • [PATCH 2/4] ARM: kuser: split out kuser code   Russell King
  • [PATCH 3/4] ARM: kuser: simplify kuser_cmpxchg* preprocessor conditionals   Russell King
  • [PATCH 4/4] ARM: kuser: split the kuser support for Thumb-capable and ARM-only   Russell King
    • [PATCH 4/4] ARM: kuser: split the kuser support for Thumb-capable and ARM-only   Nicolas Pitre
  • [PATCH 0/4] kuser updates for ARM-only vs Thumb   Martin Kaiser
    • [PATCH 0/4] kuser updates for ARM-only vs Thumb   Russell King - ARM Linux
• [RFC PATCH v1] iommu/io-pgtable-arm: Check for leaf entry right after finding it   Oleksandr Tyshchenko
  • [RFC PATCH v1] iommu/io-pgtable-arm: Check for leaf entry right after finding it   Oleksandr Tyshchenko
    • [RFC PATCH v1] iommu/io-pgtable-arm: Check for leaf entry right after finding it   Will Deacon
      • [RFC PATCH v1] iommu/io-pgtable-arm: Check for leaf entry right after finding it   Oleksandr Tyshchenko
      • [RFC PATCH v1] iommu/io-pgtable-arm: Check for leaf entry right after finding it   Will Deacon
• [PATCH v8 0/3] DMA Engine: switch PL330 driver to non-irq-safe runtime PM   Marek Szyprowski
  • [PATCH v8 2/3] dmaengine: pl330: remove pdata based initialization   Marek Szyprowski
  • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Marek Szyprowski
    • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Vinod Koul
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Marek Szyprowski
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Ulf Hansson
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Vinod Koul
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Ulf Hansson
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Marek Szyprowski
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Vinod Koul
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Vinod Koul
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Ulf Hansson
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Vinod Koul
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Marek Szyprowski
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Ulf Hansson
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Marek Szyprowski
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Marek Szyprowski
      • [PATCH v8 3/3] dmaengine: pl330: Don't require irq-safe runtime PM   Ulf Hansson
• [PATCH v8 1/3] dmaengine: Add new device_{set, release}_slave callbacks   Marek Szyprowski
  • [PATCH v8 1/3] dmaengine: Add new device_{set,release}_slave callbacks   Vinod Koul
    • [PATCH v8 1/3] dmaengine: Add new device_{set,release}_slave callbacks   Marek Szyprowski
      • [PATCH v8 1/3] dmaengine: Add new device_{set,release}_slave callbacks   Vinod Koul
      • [PATCH v8 1/3] dmaengine: Add new device_{set,release}_slave callbacks   Marek Szyprowski
• [GIT PULL] KVM/ARM updates for 4.11   Marc Zyngier
  • [PATCH 01/25] KVM: arm/arm64: Remove struct vgic_irq pending field   Marc Zyngier
  • [PATCH 02/25] KVM: arm/arm64: vgic: Add debugfs vgic-state file   Marc Zyngier
  • [PATCH 03/25] KVM: arm/arm64: vgic: Implement support for userspace access   Marc Zyngier
  • [PATCH 04/25] KVM: arm/arm64: vgic: Add distributor and redistributor access   Marc Zyngier
  • [PATCH 05/25] KVM: arm/arm64: vgic: Introduce find_reg_by_id()   Marc Zyngier
  • [PATCH 06/25] irqchip/gic-v3: Add missing system register definitions   Marc Zyngier
  • [PATCH 07/25] KVM: arm/arm64: vgic: Introduce VENG0 and VENG1 fields to vmcr struct   Marc Zyngier
  • [PATCH 08/25] KVM: arm/arm64: vgic: Implement VGICv3 CPU interface access   Marc Zyngier
  • [PATCH 09/25] KVM: arm/arm64: vgic: Implement KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO ioctl   Marc Zyngier
  • [PATCH 10/25] KVM: arm/arm64: Documentation: Update arm-vgic-v3.txt   Marc Zyngier
  • [PATCH 11/25] arm/arm64: KVM: Enforce unconditional flush to PoC when mapping to stage-2   Marc Zyngier
  • [PATCH 12/25] arm/arm64: KVM: Stop propagating cacheability status of a faulted page   Marc Zyngier
  • [PATCH 13/25] arm/arm64: KVM: Get rid of KVM_MEMSLOT_INCOHERENT   Marc Zyngier
  • [PATCH 14/25] KVM: arm/arm64: Remove kvm_vgic_inject_mapped_irq   Marc Zyngier
  • [PATCH 15/25] KVM: arm/arm64: vgic: Stop injecting the MSI occurrence twice   Marc Zyngier
  • [PATCH 16/25] KVM: arm/arm64: Abstract virtual timer context into separate structure   Marc Zyngier
  • [PATCH 17/25] KVM: arm/arm64: Move cntvoff to each timer context   Marc Zyngier
  • [PATCH 18/25] KVM: arm/arm64: Decouple kvm timer functions from virtual timer   Marc Zyngier
  • [PATCH 19/25] KVM: arm/arm64: Add the EL1 physical timer context   Marc Zyngier
  • [PATCH 20/25] KVM: arm/arm64: Initialize the emulated EL1 physical timer   Marc Zyngier
  • [PATCH 21/25] KVM: arm/arm64: Update the physical timer interrupt level   Marc Zyngier
  • [PATCH 22/25] KVM: arm/arm64: Set a background timer to the earliest timer expiration   Marc Zyngier
  • [PATCH 23/25] KVM: arm/arm64: Set up a background timer for the physical timer emulation   Marc Zyngier
  • [PATCH 24/25] KVM: arm64: Add the EL1 physical timer access handler   Marc Zyngier
  • [PATCH 25/25] KVM: arm/arm64: Emulate the EL1 phys timer registers   Marc Zyngier
  • [GIT PULL] KVM/ARM updates for 4.11   Paolo Bonzini
• [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Arnd Bergmann
  • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Andrew Lunn
    • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Arnd Bergmann
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Andrew Lunn
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Florian Fainelli
  • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Andrew Lunn
  • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Florian Fainelli
    • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Arnd Bergmann
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Florian Fainelli
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Arnd Bergmann
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Florian Fainelli
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Arnd Bergmann
      • [PATCH] [net-next] ARM: orion: fix PHYLIB dependency   Arnd Bergmann
• [GIT PULL] Allwinner arm64 changes for 4.11   Arnd Bergmann
• [GIT PULL] Qualcomm ARM64 DT Updates for v4.11 Part 2   Arnd Bergmann
• [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Rob Herring
  • [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Russell King - ARM Linux
  • [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Russell King - ARM Linux
    • [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Rob Herring
      • [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Stephen Boyd
  • [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Frank Rowand
    • [PATCH v3 1/3] of: Support parsing phandle argument lists through a nexus node   Frank Rowand
• [PATCH 0/4] arm64: correctly and consistently handle Xt == XZR   Mark Rutland
  • [PATCH 3/4] arm64: cpufeature: correctly handle MRS to XZR   Mark Rutland
  • [PATCH 4/4] arm64/kprobes: consistently handle MRS/MSR with XZR   Mark Rutland
• [PATCH 1/4] arm64: ptrace: add XZR-safe regs accessors   Mark Rutland
• [PATCH 2/4] arm64: traps: correctly handle MRS/MSR with XZR   Mark Rutland
• [PATCH] ARM: dts: armada-385-linksys: fix DSA compatible property   Ralph Sennhauser
  • [PATCH] ARM: dts: armada-385-linksys: fix DSA compatible property   Andrew Lunn
    • [PATCH] ARM: dts: armada-385-linksys: fix DSA compatible property   Gregory CLEMENT
• [RESEND PATCH 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform   Wolfram Sang
• [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Maxime Ripard
  • [PATCH 2/8] dt-bindings: gpu: mali: Add optional memory-region   Maxime Ripard
    • [PATCH 2/8] dt-bindings: gpu: mali: Add optional memory-region   Rob Herring
    • [PATCH 2/8] dt-bindings: gpu: mali: Add optional memory-region   Maxime Ripard
  • [PATCH 3/8] mm: cma: Export a few symbols   Maxime Ripard
    • [PATCH 3/8] mm: cma: Export a few symbols   Michal Hocko
      • [PATCH 3/8] mm: cma: Export a few symbols   Maxime Ripard
      • [PATCH 3/8] mm: cma: Export a few symbols   Michal Hocko
      • [PATCH 3/8] mm: cma: Export a few symbols   Maxime Ripard
  • [PATCH 4/8] drm/sun4i: Grab reserved memory region   Maxime Ripard
    • [PATCH 4/8] drm/sun4i: Grab reserved memory region   Maxime Ripard
  • [PATCH 5/8] ARM: sun8i: a33: Add shared display memory pool   Maxime Ripard
  • [PATCH 6/8] dt-bindings: gpu: mali: Add optional OPPs   Maxime Ripard
    • [PATCH 6/8] dt-bindings: gpu: mali: Add optional OPPs   Rob Herring
    • [PATCH 6/8] dt-bindings: gpu: mali: Add optional OPPs   Maxime Ripard
  • [PATCH 7/8] ARM: sunxi: Select PM_OPP   Maxime Ripard
    • [PATCH 7/8] ARM: sunxi: Select PM_OPP   Maxime Ripard
  • [PATCH 8/8] ARM: sun8i: a33: Add the Mali OPPs   Maxime Ripard
    • [PATCH 8/8] ARM: sun8i: a33: Add the Mali OPPs   Rob Herring
      • [PATCH 8/8] ARM: sun8i: a33: Add the Mali OPPs   Maxime Ripard
  • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Emil Velikov
    • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Maxime Ripard
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Emil Velikov
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Maxime Ripard
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Emil Velikov
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Rask Ingemann Lambertsen
  • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Maxime Ripard
    • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Tobias Jakobi
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Emil Velikov
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Alexandre Belloni
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Tobias Jakobi
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Rob Herring
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Maxime Ripard
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Thierry Reding
      • [PATCH 0/8] ARM: sun8i: a33: Mali improvements   Maxime Ripard
• [PATCH 1/8] ARM: sun8i: Fix the mali clock rate   Maxime Ripard
  • [PATCH 1/8] ARM: sun8i: Fix the mali clock rate   Maxime Ripard
• [stericsson:mmc-no-NULL 30/34] drivers/mmc/core/mmc_test.c:856:15: error: too many arguments to function 'mmc_start_areq'   kbuild test robot
• [PATCH next 0/2] crypto: atmel-sha: fix error management   Cyrille Pitchen
  • [PATCH next 1/2] crypto: atmel-sha: fix missing "return" instructions   Cyrille Pitchen
  • [PATCH next 2/2] crypto: atmel-sha: fix error management in atmel_sha_start()   Cyrille Pitchen
  • [PATCH next 0/2] crypto: atmel-sha: fix error management   Herbert Xu
• [PATCH v2 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board   Sudeep Holla
  • [PATCH v2 1/3] ARM: dts: Add support for phyCORE-AM335x PCM-953 carrier board   Tony Lindgren
• [PATCH] arm64: arch_timer: document Hisilicon erratum 161010101   Mark Rutland
• [stericsson:mmc-no-NULL 32/34] drivers/mmc/core/queue.h:13:4: note: in expansion of macro 'req_op'   kbuild test robot
• [stericsson:mmc-no-NULL 33/34] ERROR: "mmc_blk_rw_done_success" [drivers/mmc/core/mmc_core.ko] undefined!   kbuild test robot
• [stericsson:mmc-no-NULL 30/34] drivers/mmc/core/mmc_test.c:856:43: sparse: too many arguments for function mmc_start_areq   kbuild test robot
• [PATCH 0/4] [media] Fixes for colorspace logic in exynos-gsc and s5p-mfc drivers   Thibault Saunier
  • [PATCH 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Thibault Saunier
  • [PATCH 2/4] [media] exynos-gsc: Respect userspace colorspace setting   Thibault Saunier
  • [PATCH 3/4] [media] s5p-mfc: Set colorspace in VIDIO_{G,TRY}_FMT   Thibault Saunier
  • [PATCH 4/4] [media] s5p-mfc: Always check and set 'v4l2_pix_format:field' field   Thibault Saunier
    • [PATCH 4/4] [media] s5p-mfc: Always check and set 'v4l2_pix_format:field' field   kbuild test robot
    • [PATCH 4/4] [media] s5p-mfc: Always check and set 'v4l2_pix_format:field' field   kbuild test robot
    • [PATCH 4/4] [media] s5p-mfc: Always check and set 'v4l2_pix_format:field' field   kbuild test robot
• [PATCH v2 0/4] [media] Fixes for colorspace logic in exynos-gsc and s5p-mfc drivers   Thibault Saunier
  • [PATCH v2 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Thibault Saunier
    • [PATCH v2 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Andrzej Hajda
    • [PATCH v2 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Russell King - ARM Linux
      • [PATCH v2 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Hans Verkuil
  • [PATCH v2 2/4] [media] exynos-gsc: Respect userspace colorspace setting   Thibault Saunier
    • [PATCH v2 2/4] [media] exynos-gsc: Respect userspace colorspace setting   Andrzej Hajda
  • [PATCH v2 3/4] [media] s5p-mfc: Set colorspace in VIDIO_{G,TRY}_FMT   Thibault Saunier
    • [PATCH v2 3/4] [media] s5p-mfc: Set colorspace in VIDIO_{G, TRY}_FMT   Andrzej Hajda
  • [PATCH v2 4/4] [media] s5p-mfc: Always check and set 'v4l2_pix_format:field' field   Thibault Saunier
    • [PATCH v2 4/4] [media] s5p-mfc: Always check and set 'v4l2_pix_format:field' field   Andrzej Hajda
• [PATCH] ARM: multi_v7_defconfig: enable pstore configs   Brian Norris
  • [PATCH] ARM: multi_v7_defconfig: enable pstore configs   Arnd Bergmann
• [PATCH v2 1/2] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
  • [PATCH v2 2/2] efi: arm-stub: Round up FDT allocation to mapping size   Ard Biesheuvel
    • [PATCH v2 2/2] efi: arm-stub: Round up FDT allocation to mapping size   Ard Biesheuvel
    • [PATCH v2 2/2] efi: arm-stub: Round up FDT allocation to mapping size   Jeffrey Hugo
      • [PATCH v2 2/2] efi: arm-stub: Round up FDT allocation to mapping size   Ard Biesheuvel
  • [PATCH v2 1/2] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ruigrok, Richard
    • [PATCH v2 1/2] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
      • [PATCH v2 1/2] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Mark Rutland
      • [PATCH v2 1/2] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Ard Biesheuvel
  • [PATCH v2 1/2] efi: arm-stub: Correct FDT and initrd allocation rules for arm64   Jeffrey Hugo
• [PATCH] Do not initialise statics to NULL   William Stevenson
  • [PATCH] Do not initialise statics to NULL   Greg Kroah-Hartman
• [PATCH] media: fix s5p_mfc_set_dec_frame_buffer_v6() to print buf size in hex   Shuah Khan
  • [PATCH] media: fix s5p_mfc_set_dec_frame_buffer_v6() to print buf size in hex   Nicolas Dufresne
  • [PATCH] media: fix s5p_mfc_set_dec_frame_buffer_v6() to print buf size in hex   Andrzej Hajda
• [PATCH] media: s5p_mfc - remove unneeded io_modes initialzation in s5p_mfc_open()   Shuah Khan
  • [PATCH] media: s5p_mfc - remove unneeded io_modes initialzation in s5p_mfc_open()   Andrzej Hajda
• [PATCH] ARM: dts: imx25-pdk: Allow USB OTG to work in host mode   Fabio Estevam
• [PATCH v2 0/6] arm64: dts: rockchip: support Google Kevin   Brian Norris
  • [PATCH v2 1/6] arm64: dts: Add symlinks for cros-ec-keyboard and cros-ec-sbs   Brian Norris
    • [PATCH v2 1/6] arm64: dts: Add symlinks for cros-ec-keyboard and cros-ec-sbs   Olof Johansson
      • [PATCH v2 1/6] arm64: dts: Add symlinks for cros-ec-keyboard and cros-ec-sbs   Heiko Stuebner
  • [PATCH v2 2/6] arm64: dts: rockchip: support dwc3 USB for rk3399   Brian Norris
    • [PATCH v2 2/6] arm64: dts: rockchip: support dwc3 USB for rk3399   Heiko Stuebner
  • [PATCH v2 3/6] dt-bindings: Document rk3399 Gru/Kevin   Brian Norris
    • [PATCH v2 3/6] dt-bindings: Document rk3399 Gru/Kevin   Rob Herring
  • [PATCH v2 4/6] arm64: dts: rockchip: add Gru/Kevin DTS   Brian Norris
    • [PATCH v2 4/6] arm64: dts: rockchip: add Gru/Kevin DTS   Heiko Stuebner
      • [PATCH v2 4/6] arm64: dts: rockchip: add Gru/Kevin DTS   Doug Anderson
  • [PATCH v2 5/6] arm64: dts: rockchip: describe Gru/Kevin OPPs + CPU regulators   Brian Norris
  • [PATCH v2 6/6] arm64: dts: rockchip: sort rk3399 by unit address   Brian Norris
    • [PATCH v2 6/6] arm64: dts: rockchip: sort rk3399 by unit address   Heiko Stuebner
• [GIT PULL 00/32] perf/core improvements and fixes   Arnaldo Carvalho de Melo
  • [PATCH 02/32] perf bpf: Add missing newline in debug messages   Arnaldo Carvalho de Melo
  • [GIT PULL 00/32] perf/core improvements and fixes   Ingo Molnar
• [PATCH 01/32] perf tools arm64: Add support for generating bpf prologue   Arnaldo Carvalho de Melo
• [RFC] syscalls: Restore address limit after a syscall   Andy Lutomirski
  • [RFC] syscalls: Restore address limit after a syscall   Russell King - ARM Linux
    • [RFC] syscalls: Restore address limit after a syscall   Kees Cook
      • [RFC] syscalls: Restore address limit after a syscall   Russell King - ARM Linux
• [PATCH] ARM: dts: sun5i-gr8: Rename pwm0_pins_a to pwm0_pins   Chen-Yu Tsai
  • [PATCH] ARM: dts: sun5i-gr8: Rename pwm0_pins_a to pwm0_pins   Maxime Ripard
  • [PATCH] ARM: dts: sun5i-gr8: Rename pwm0_pins_a to pwm0_pins   kbuild test robot
• [PATCH v14 0/6] Enable PMUs in ACPI systems   Ganapatrao Kulkarni
• [PATCH v3 0/2] drm/rockchip: switch to drm_mm for support arm64 iommu   Mark Yao
  • [PATCH v3 1/2] drm/rockchip: Do not use DMA mapping API if attached to IOMMU domain   Mark Yao
  • [PATCH v3 2/2] drm/rockchip: Use common IOMMU API to attach devices   Mark Yao
• [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Hanjun Guo
  • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Alexander Graf
    • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Daniel Lezcano
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Alexander Graf
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Ding Tianhong
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Sanil Kumar
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Daniel Lezcano
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Hanjun Guo
  • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Marc Zyngier
  • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Marc Zyngier
    • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Hanjun Guo
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Marc Zyngier
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Alexander Graf
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Marc Zyngier
      • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Hanjun Guo
    • [PATCH 2/2] arch_timer: acpi: add hisi timer erratum data   Ding Tianhong
• [PATCH 0/4] Move DP phy switch to PHY driver   Chris Zhong
  • [PATCH 1/4] Documentation: bindings: add uphy-dp-sel for Rockchip USB Type-C PHY   Chris Zhong
    • [PATCH 1/4] Documentation: bindings: add uphy-dp-sel for Rockchip USB Type-C PHY   Rob Herring
      • [PATCH 1/4] Documentation: bindings: add uphy-dp-sel for Rockchip USB Type-C PHY   Chris Zhong
  • [PATCH 2/4] arm64: dts: rockchip: add rockchip, uphy-dp-sel for Type-C phy   Chris Zhong
  • [PATCH 3/4] phy: rockchip-typec: support DP phy switch   Chris Zhong
  • [PATCH 4/4] drm/rockchip: cdn-dp: remove the DP phy switch   Chris Zhong
• [PATCH v4 3/3] USB3/DWC3: Enable undefined length INCR burst type   Jerry Huang
  • [PATCH v4 3/3] USB3/DWC3: Enable undefined length INCR burst type   Felipe Balbi
    • [PATCH v4 3/3] USB3/DWC3: Enable undefined length INCR burst type   Jerry Huang
    • [PATCH v4 3/3] USB3/DWC3: Enable undefined length INCR burst type   Jerry Huang
• [PATCH v3 0/4] Broadcom SBA RAID support   Anup Patel
  • [PATCH v3 1/4] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position   Anup Patel
  • [PATCH v3 2/4] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()   Anup Patel
  • [PATCH v3 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
    • [PATCH v3 3/4] dmaengine: Add Broadcom SBA RAID driver   Dan Williams
      • [PATCH v3 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
      • [PATCH v3 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
      • [PATCH v3 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
  • [PATCH v3 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver   Anup Patel
• [PATCH] ARM: sun7i: Enable audio codec on A20-OLinuXino-Micro   Jonathan Liu
  • [PATCH] ARM: sun7i: Enable audio codec on A20-OLinuXino-Micro   Maxime Ripard
• [PATCH 0/4] ASoC: sun8i-codec: Clean-up   Mylène Josserand
  • [PATCH 2/4] ASoC: sun8i-codec: Update mixer to use SOC_DAPM_DOUBLE   Mylène Josserand
    • [PATCH 2/4] ASoC: sun8i-codec: Update mixer to use SOC_DAPM_DOUBLE   Chen-Yu Tsai
  • [PATCH 4/4] ASoC: sun8i-codec: Convert to use SND_SOC_DAPM_AIF_IN   Mylène Josserand
• [PATCH 1/4] ASoC: sun8i-codec: Remove analog "HP" widget   Mylène Josserand
  • [PATCH 1/4] ASoC: sun8i-codec: Remove analog "HP" widget   Chen-Yu Tsai
• [PATCH 3/4] ASoC: sun8i-codec: Convert to SOC_MIXER_ARRAY   Mylène Josserand
  • [PATCH 3/4] ASoC: sun8i-codec: Convert to SOC_MIXER_ARRAY   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 5/8] arm64: dts: allwinner: add R_PIO node   Chen-Yu Tsai
• [PATCH RESEND] ASoC: sun4i-i2s: Update binding documentation to include A31   Mylène Josserand
• [PATCH 0/2] meson-gxbb: Add mali-450 support   Neil Armstrong
  • [PATCH 1/2] clk: meson-gxbb: Add MALI clocks and fix GP0 pll support   Neil Armstrong
  • [PATCH 2/2] ARM64: dts: meson-gxbb: Add Mali node   Neil Armstrong
• [PATCH 0/3] drivers/perf: arm_pmu: rework IRQ management   Mark Rutland
  • [PATCH 3/3] drivers/perf: arm_pmu: split irq request from enable   Mark Rutland
• [PATCH 1/3] drivers/perf: arm_pmu: rework per-cpu allocation   Mark Rutland
• [PATCH 2/3] drivers/perf: arm_pmu: manage interrupts per-cpu   Mark Rutland
• [PATCH] staging: bcm2835-audio: Fixed initialization of global to "false"   Abhijit Naik
• [PATCH] ARM: dts: am335x-pcm953: Fix legacy wakeup source binding   Teresa Remmet
  • [PATCH] ARM: dts: am335x-pcm953: Fix legacy wakeup source binding   Tony Lindgren
• [PATCH net-next v3 06/10] net: dsa: Migrate to device_find_class()   Greg KH
  • [PATCH net-next v3 06/10] net: dsa: Migrate to device_find_class()   Florian Fainelli
    • [PATCH net-next v3 06/10] net: dsa: Migrate to device_find_class()   Greg KH
• [PATCH v3 0/4] Fixes for colorspace logic in exynos-gsc and s5p-mfc drivers   Thibault Saunier
  • [PATCH v3 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Thibault Saunier
    • [PATCH v3 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Hans Verkuil
      • [PATCH v3 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Thibault Saunier
      • [PATCH v3 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Hans Verkuil
  • [PATCH v3 2/4] [media] exynos-gsc: Respect userspace colorspace setting in try_fmt   Thibault Saunier
  • [PATCH v3 3/4] [media] s5p-mfc: Set colorspace in VIDIO_{G,TRY}_FMT   Thibault Saunier
    • [PATCH v3 3/4] [media] s5p-mfc: Set colorspace in VIDIO_{G,TRY}_FMT   Hans Verkuil
  • [PATCH v3 4/4] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Thibault Saunier
• [PATCH v1 0/2] clk: imx7d: correct enet clock CCGR register offset   Andy Duan
  • [PATCH v1 1/2] clk: imx7d: correct enet clock CCGR register offset   Andy Duan
  • [PATCH v1 2/2] ARM: dts: imx7d: correct enet ipg and enet_out clock   Andy Duan
• [PATCH v2 0/9] STM32 LCD-TFT display controller   Yannick Fertre
  • [PATCH v2 5/9] drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H   Yannick Fertre
  • [PATCH v2 6/9] ARM: dts: stm32: Add ltdc support on stm32f429 MCU   Yannick Fertre
  • [PATCH v2 7/9] ARM: dts: stm32: Add ltdc support on stm32f429 MCU   Yannick Fertre
• [PATCH v2 1/9] dt-bindings: display: add STM32 LTDC driver   Yannick Fertre
• [PATCH v2 2/9] drm/st: Add STM32 LTDC driver   Yannick Fertre
• [PATCH v2 3/9] drm/st: Add STM32 LTDC driver   Yannick Fertre
• [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Yannick Fertre
  • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Rob Herring
    • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Yannick FERTRE
      • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Rob Herring
      • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Yannick FERTRE
      • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Rob Herring
      • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Yannick FERTRE
      • [PATCH v2 4/9] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Rob Herring
• [PATCH v2 8/9] ARM: dts: stm32: Enable ltdc & simple panel on stm32f429-Eval board   Yannick Fertre
• [PATCH v2 9/9] ARM: configs: stm32: ADD LDTC support   Yannick Fertre
• [PATCH v3 2/3] USB3/DWC3: Add property "snps, incr-burst-type-adjustment" for INCR burst type   Jerry Huang
• [PATCH v2 0/7] STM32 LCD-TFT display controller   Yannick Fertre
  • [PATCH v2 1/7] dt-bindings: display: add STM32 LTDC driver   Yannick Fertre
    • [PATCH v2 1/7] dt-bindings: display: add STM32 LTDC driver   Rob Herring
      • [PATCH v2 1/7] dt-bindings: display: add STM32 LTDC driver   Yannick FERTRE
  • [PATCH v2 2/7] drm/st: Add STM32 LTDC driver   Yannick Fertre
• [PATCH v2 3/7] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Yannick Fertre
• [PATCH v2 4/7] drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H   Yannick Fertre
• [PATCH v2 5/7] ARM: dts: stm32: Add ltdc support on stm32f429 MCU   Yannick Fertre
• [PATCH v2 6/7] ARM: dts: stm32: Enable ltdc & simple panel on stm32f429-Eval board   Yannick Fertre
• [PATCH v2 7/7] ARM: configs: stm32: ADD LDTC support   Yannick Fertre
  • [PATCH v2 7/7] ARM: configs: stm32: ADD LDTC support   Alexandre Torgue
• [PATCH] atmel_serial: Use the fractional divider when possible   Romain Izard
  • [PATCH] atmel_serial: Use the fractional divider when possible   Ludovic Desroches
    • [PATCH] atmel_serial: Use the fractional divider when possible   Richard Genoud
• Enable DMA for daVinci SPI controller   Frode Isaksen
  • [PATCH 1/8] spi: davinci: Use SPI framework to handle DMA mapping   Frode Isaksen
    • [PATCH 1/8] spi: davinci: Use SPI framework to handle DMA mapping   Mark Brown
  • [PATCH 2/8] spi: davinci: enable DMA when channels are defined in DT   Frode Isaksen
    • [PATCH 2/8] spi: davinci: enable DMA when channels are defined in DT   Mark Brown
  • [PATCH 3/8] spi: davinci: limit the transfer size if DMA enabled   Frode Isaksen
    • [PATCH 3/8] spi: davinci: limit the transfer size if DMA enabled   Kevin Hilman
    • [PATCH 3/8] spi: davinci: limit the transfer size if DMA enabled   Sekhar Nori
      • [PATCH 3/8] spi: davinci: limit the transfer size if DMA enabled   Frode Isaksen
      • [PATCH 3/8] spi: davinci: limit the transfer size if DMA enabled   Sekhar Nori
      • [PATCH 3/8] spi: davinci: limit the transfer size if DMA enabled   Frode Isaksen
  • [PATCH 4/8] spi: davinci: flush caches when performing DMA   Frode Isaksen
  • [PATCH 5/8] spi: davinci: do not use DMA if transfer length is less than 16   Frode Isaksen
  • [PATCH 6/8] spi: loopback-test: set HW loopback mode if loopback set   Frode Isaksen
  • [PATCH 7/8] spi: loopback-test: add option to use vmalloc'ed buffers   Frode Isaksen
  • [PATCH 8/8] spi: loopback-test: limit length to spi_max_transfer_size()   Frode Isaksen
• [PATCH v2] ARM: imx6: add ZII RDU2 boards   Lucas Stach
  • [PATCH v2] ARM: imx6: add ZII RDU2 boards   Chris Healy
• [PATCH v2] media: s5p_mfc print buf pointer in hex constistently   Shuah Khan
  • [PATCH v2] media: s5p_mfc print buf pointer in hex constistently   Joe Perches
• [PATCH] arm: MAINTAINERS: transfer maintainership for the EZX platform   Stefan Schmidt
  • [PATCH] arm: MAINTAINERS: transfer maintainership for the EZX platform   Robert Jarzmik
    • [PATCH] arm: MAINTAINERS: transfer maintainership for the EZX platform   Stefan Schmidt
• [PATCH] staging: bcm2835-audio: fix trailing statements   AbdAllah-MEZITI
  • [PATCH] staging: bcm2835-audio: fix trailing statements   Joe Perches
• [PATCH 0/4] arm64: mmu: avoid writeable-executable mappings   Ard Biesheuvel
  • [PATCH 1/4] arm: kvm: move kvm_vgic_global_state out of .text section   Ard Biesheuvel
    • [PATCH 1/4] arm: kvm: move kvm_vgic_global_state out of .text section   Marc Zyngier
  • [PATCH 2/4] arm64: alternatives: apply boot time fixups via the linear mapping   Ard Biesheuvel
    • [PATCH 2/4] arm64: alternatives: apply boot time fixups via the linear mapping   Kees Cook
    • [PATCH 2/4] arm64: alternatives: apply boot time fixups via the linear mapping   Suzuki K Poulose
      • [PATCH 2/4] arm64: alternatives: apply boot time fixups via the linear mapping   Ard Biesheuvel
  • [PATCH 3/4] arm64: mmu: map .text as read-only from the outset   Ard Biesheuvel
    • [PATCH 3/4] arm64: mmu: map .text as read-only from the outset   Kees Cook
  • [PATCH 4/4] arm64: mmu: apply strict permissions to .init.text and .init.data   Ard Biesheuvel
    • [PATCH 4/4] arm64: mmu: apply strict permissions to .init.text and .init.data   Kees Cook
  • [PATCH 0/4] arm64: mmu: avoid writeable-executable mappings   Laura Abbott
• [PATCH v3 21/24] drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded   John Keeping
• [PATCH] usb: gadget: udc: atmel: Endpoint allocation scheme fixes   cristian.birsan at microchip.com
  • [PATCH] usb: gadget: udc: atmel: Endpoint allocation scheme fixes   Greg KH
• [PATCH v2] staging: bcm2835-audio: fix trailing statements   AbdAllah-MEZITI
  • [PATCH v2] staging: bcm2835-audio: fix trailing statements   AbdAllah-MEZITI
• [PATCH] PCI: Xilinx NWL: Remove mask for messages not supported by AXI   Bjorn Helgaas
  • [PATCH] PCI: Xilinx NWL: Remove mask for messages not supported by AXI   Bharat Kumar Gogada
    • [PATCH] PCI: Xilinx NWL: Remove mask for messages not supported by AXI   Michal Simek
• [PATCH INTERNAL 0/2] Add support for ARM CCN-502 interconnect   Velibor Markovski
  • [PATCH INTERNAL 2/2] bus: arm-ccn: Enable stats for CCN-502 interconnect   Velibor Markovski
    • [PATCH INTERNAL 2/2] bus: arm-ccn: Enable stats for CCN-502 interconnect   Velibor Markovski
• [PATCH INTERNAL 1/2] dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string   Velibor Markovski
  • [PATCH INTERNAL 1/2] dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string   Velibor Markovski
• [PATCH 0/2] Add support for ARM CCN-502 interconnect   Velibor Markovski
  • [PATCH 0/2] Add support for ARM CCN-502 interconnect   Velibor Markovski
    • [PATCH 1/2] dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string   Velibor Markovski
      • [PATCH 1/2] dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string   Mark Rutland
      • [PATCH 1/2] dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string   Pawel Moll
    • [PATCH 2/2] bus: arm-ccn: Enable stats for CCN-502 interconnect   Velibor Markovski
• [PATCH] serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'   Christophe JAILLET
  • [PATCH] serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'   Uwe Kleine-König
• [PATCH] Add Master Sample Data Mode for SPI   Vinicius Maciel
  • [linux-sunxi] [PATCH] Add Master Sample Data Mode for SPI   Siarhei Siamashka
    • [linux-sunxi] [PATCH] Add Master Sample Data Mode for SPI   Siarhei Siamashka
• [PATCH] PCI:MSI Return -ENOSPC when requested vectors is not enough   Bjorn Helgaas
• [PATCH v3] PCI: exynos: refactor exynos pcie driver   Bjorn Helgaas
  • [PATCH v3] PCI: exynos: refactor exynos pcie driver   Jingoo Han
  • [PATCH v3] PCI: exynos: refactor exynos pcie driver   Bjorn Helgaas
• [PATCH] pinctrl: qcom: add get_direction function   Timur Tabi
  • [PATCH] pinctrl: qcom: add get_direction function   Stephen Boyd
    • [PATCH] pinctrl: qcom: add get_direction function   Timur Tabi
      • [PATCH] pinctrl: qcom: add get_direction function   Linus Walleij
    • [PATCH] pinctrl: qcom: add get_direction function   Linus Walleij
• [PATCH] [v2] pinctrl: qcom: add get_direction function   Timur Tabi
  • [PATCH] [v2] pinctrl: qcom: add get_direction function   Stephen Boyd
• [PATCH] Staging: media: platform: bcm2835 - style fix   Derek Robson
• [PATCH v13 00/12] power: add power sequence library   Peter Chen
  • [PATCH v13 02/12] power: add power sequence library   Peter Chen
  • [PATCH v13 03/12] usb: separate out sysdev pointer from usb_bus   Peter Chen
  • [PATCH v13 04/12] usb: chipidea: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v13 05/12] usb: ehci: fsl: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
    • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Alexander Sverdlin
    • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Vivek Gautam
    • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Roger Quadros
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Arnd Bergmann
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Roger Quadros
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Arnd Bergmann
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Roger Quadros
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Roger Quadros
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Felipe Balbi
      • [PATCH v13 06/12] usb: xhci: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v13 07/12] usb: ehci: use bus->sysdev for DMA configuration   Peter Chen
  • [PATCH v13 08/12] binding-doc: usb: usb-device: add optional properties for power sequence   Peter Chen
  • [PATCH v13 09/12] usb: core: add power sequence handling for USB devices   Peter Chen
  • [PATCH v13 10/12] ARM: dts: imx6qdl: Enable usb node children with <reg>   Peter Chen
  • [PATCH v13 11/12] ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property   Peter Chen
  • [PATCH v13 12/12] ARM: dts: imx6q-evi: Fix onboard hub reset line   Peter Chen
  • [PATCH v13 00/12] power: add power sequence library   Rafael J. Wysocki
  • [PATCH v13 00/12] power: add power sequence library   Roger Quadros
    • [PATCH v13 00/12] power: add power sequence library   Peter Chen
• [PATCH v13 01/12] binding-doc: power: pwrseq-generic: add binding doc for generic power sequence library   Peter Chen
• [PATCH v2] ARM: spi/sun7i: Add Master Sample Data Mode for SPI   Vinicius Maciel
  • [PATCH v2] ARM: spi/sun7i: Add Master Sample Data Mode for SPI   Maxime Ripard
  • [PATCH v2] ARM: spi/sun7i: Add Master Sample Data Mode for SPI   Mark Brown
• [stericsson:mmc-no-NULL 32/34] include/linux/blk_types.h:209:8: error: dereferencing pointer to incomplete type   kbuild test robot
• ARM: dts: rockchip: fix the MiQi board's LED definition   Willy Tarreau
  • ARM: dts: rockchip: fix the MiQi board's LED definition   Heiko Stuebner
• ARM: dts: rockchip: add the MiQi board's fan definition   Willy Tarreau
  • ARM: dts: rockchip: add the MiQi board's fan definition   Heiko Stuebner
    • ARM: dts: rockchip: add the MiQi board's fan definition   Willy Tarreau
      • ARM: dts: rockchip: add the MiQi board's fan definition   Heiko Stuebner
      • ARM: dts: rockchip: add the MiQi board's fan definition   Willy Tarreau
• [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Willy Tarreau
  • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Andrew Lunn
    • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Willy Tarreau
      • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Andrew Lunn
      • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Willy Tarreau
      • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Andrew Lunn
      • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Willy Tarreau
      • [PATCH] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Thomas Petazzoni
• Allwinner A31 framebuffer fails with new CCU clock bindings   Bob Ham
  • Allwinner A31 framebuffer fails with new CCU clock bindings   Maxime Ripard
    • Allwinner A31 framebuffer fails with new CCU clock bindings   Bob Ham
      • [linux-sunxi] Re: Allwinner A31 framebuffer fails with new CCU clock bindings   Chen-Yu Tsai
• [PATCH 1/4] PCI: add DT bindings for Faraday Technology PCI Host Bridge   Linus Walleij
  • [PATCH 2/4] PCI: add driver for Faraday Technology Host Bridge   Linus Walleij
  • [PATCH 3/4] ARM: gemini: select MIGHT_HAVE_PCI   Linus Walleij
  • [PATCH 4/4] ARM: dts: add PCI to the Gemini device trees   Linus Walleij
  • [PATCH 1/4] PCI: add DT bindings for Faraday Technology PCI Host Bridge   Rob Herring
    • [PATCH 1/4] PCI: add DT bindings for Faraday Technology PCI Host Bridge   Linus Walleij
• [nomadik:gemini 28/37] pci-faraday.c:undefined reference to `pci_fixup_irqs'   kbuild test robot
• [PATCH 0/8] drm/sun4i: Add basic LVDS support for A10   Priit Laes
  • [PATCH 1/8] ARM: sunxi_defconfig: Enable simple panel   Priit Laes
    • [linux-sunxi] [PATCH 1/8] ARM: sunxi_defconfig: Enable simple panel   Chen-Yu Tsai
  • [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi.   Priit Laes
    • [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi.   Maxime Ripard
      • [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi.   Chen-Yu Tsai
      • [linux-sunxi] Re: [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi.   Priit Laes
      • [linux-sunxi] Re: [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi.   Maxime Ripard
  • [PATCH 3/8] drm/panel: simple: Add support for LG LP097x02-slq2 panel   Priit Laes
  • [PATCH 4/8] drm/sun4i: Add optional 'mode' property to TCON   Priit Laes
    • [PATCH 4/8] drm/sun4i: Add optional 'mode' property to TCON   Maxime Ripard
  • [PATCH 5/8] drm/sun4i: Add encoder type argument to sun4i_tcon0_mode_set   Priit Laes
    • [PATCH 5/8] drm/sun4i: Add encoder type argument to sun4i_tcon0_mode_set   Maxime Ripard
  • [PATCH 6/8] drm/sun4i: Add initial LVDS stub   Priit Laes
  • [PATCH 7/8] drm/sun4i: Add various bits and pieces to enable LVDS support on sun4i   Priit Laes
    • [PATCH 7/8] drm/sun4i: Add various bits and pieces to enable LVDS support on sun4i   Maxime Ripard
  • [PATCH 8/8] ARM: dts: sun4i: gemei-g9: Add LVDS display support   Priit Laes
• [PATCH] clocksource: add __ro_after_init to cyclecounter   Bhumika Goyal
  • [PATCH] clocksource: add __ro_after_init to cyclecounter   Ard Biesheuvel
    • [PATCH] clocksource: add __ro_after_init to cyclecounter   Thomas Gleixner
    • [PATCH] clocksource: add __ro_after_init to cyclecounter   Bhumika Goyal
      • [PATCH] clocksource: add __ro_after_init to cyclecounter   Thomas Gleixner
      • [PATCH] clocksource: add __ro_after_init to cyclecounter   Bhumika Goyal
      • [PATCH] clocksource: add __ro_after_init to cyclecounter   Daniel Lezcano
  • [PATCH] clocksource: add __ro_after_init to cyclecounter   Thomas Gleixner
    • [PATCH] clocksource: add __ro_after_init to cyclecounter   Bhumika Goyal
• ERROR: Recursive variable `CC_OPTION_CFLAGS' references itself (eventually). Stop.   Bhumika Goyal
  • ERROR: Recursive variable `CC_OPTION_CFLAGS' references itself (eventually). Stop.   Russell King - ARM Linux
• [PATCH] thermal: exynos: Remove parsing unused samsung, tmu_cal_mode property   Krzysztof Kozlowski
  • [PATCH] thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: dts: exynos: Use thermal fuse value for thermal zone 0 on Exynos5420   Krzysztof Kozlowski
  • [PATCH] ARM: dts: exynos: Use thermal fuse value for thermal zone 0 on Exynos5420   Anand Moon
    • [PATCH] ARM: dts: exynos: Use thermal fuse value for thermal zone 0 on Exynos5420   Krzysztof Kozlowski
      • [PATCH] ARM: dts: exynos: Use thermal fuse value for thermal zone 0 on Exynos5420   Anand Moon
  • [PATCH] ARM: dts: exynos: Use thermal fuse value for thermal zone 0 on Exynos5420   Bartlomiej Zolnierkiewicz
  • [PATCH] ARM: dts: exynos: Use thermal fuse value for thermal zone 0 on Exynos5420   Eduardo Valentin
• [PATCH v2 0/5] arm64: mmu: avoid writeable-executable mappings   Ard Biesheuvel
  • [PATCH v2 1/5] arm: kvm: move kvm_vgic_global_state out of .text section   Ard Biesheuvel
  • [PATCH v2 2/5] arm64: mmu: move TLB maintenance from callers to create_mapping_late()   Ard Biesheuvel
    • [PATCH v2 2/5] arm64: mmu: move TLB maintenance from callers to create_mapping_late()   Mark Rutland
  • [PATCH v2 3/5] arm64: alternatives: apply boot time fixups via the linear mapping   Ard Biesheuvel
    • [PATCH v2 3/5] arm64: alternatives: apply boot time fixups via the linear mapping   Mark Rutland
  • [PATCH v2 4/5] arm64: mmu: map .text as read-only from the outset   Ard Biesheuvel
    • [PATCH v2 4/5] arm64: mmu: map .text as read-only from the outset   Mark Rutland
      • [PATCH v2 4/5] arm64: mmu: map .text as read-only from the outset   Ard Biesheuvel
      • [PATCH v2 4/5] arm64: mmu: map .text as read-only from the outset   Mark Rutland
      • [PATCH v2 4/5] arm64: mmu: map .text as read-only from the outset   Ard Biesheuvel
      • [PATCH v2 4/5] arm64: mmu: map .text as read-only from the outset   Mark Rutland
  • [PATCH v2 5/5] arm64: mmu: apply strict permissions to .init.text and .init.data   Ard Biesheuvel
    • [PATCH v2 5/5] arm64: mmu: apply strict permissions to .init.text and .init.data   Mark Rutland
• [PATCH] bcm2835-audio: Fix checkpatch errors   Man Choy
  • [PATCH] bcm2835-audio: Fix checkpatch errors   Greg Kroah-Hartman
    • [PATCH] bcm2835-audio: Fix checkpatch errors   Man Choy
      • [PATCH] bcm2835-audio: Fix checkpatch errors   Greg Kroah-Hartman
      • [PATCH] bcm2835-audio: Fix checkpatch errors   Man Choy
• [PATCH] ARM: OMAP2+: Grab reference to device nodes where needed   Guenter Roeck
  • ARM: OMAP2+: Grab reference to device nodes where needed   Guenter Roeck
    • ARM: OMAP2+: Grab reference to device nodes where needed   Tony Lindgren
      • ARM: OMAP2+: Grab reference to device nodes where needed   Guenter Roeck
      • ARM: OMAP2+: Grab reference to device nodes where needed   Tony Lindgren
• [PATCH v6] clk: mediatek: Export CPU mux clocks for CPU frequency control   Daniel Kurtz
• [PATCH v2] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Willy Tarreau
• [PATCH v3] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Willy Tarreau
  • [PATCH v3] ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS   Gregory CLEMENT
• [PATCH v7 00/20] ILP32 for ARM64   Andrew Pinski
  • [PATCH v7 00/20] ILP32 for ARM64   Maxim Kuvyrkov
• [PATCH 0/2] Add support for HwaCom AmazeTV   Carlo Caione
  • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Carlo Caione
    • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Rob Herring
      • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Kevin Hilman
      • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Rob Herring
      • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Andreas Färber
      • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Rob Herring
  • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
    • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Rob Herring
      • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
      • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Andreas Färber
      • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Rob Herring
  • [PATCH 0/2] Add support for HwaCom AmazeTV   Carlo Caione
    • [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Carlo Caione
    • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
      • [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Rob Herring
• UPS courier can not deliver parcel #06184957 to you   enter2017 at s18534480.onlinehome-server.info
• [PATCH 1/2 v4] cpufreq: qoriq: added arm64 socs support   yuantian.tang at nxp.com
  • [PATCH 2/2 v4] cpufreq: qoriq: Don't look at clock implementation details   yuantian.tang at nxp.com
    • [PATCH 2/2 v4] cpufreq: qoriq: Don't look at clock implementation details   Rafael J. Wysocki
• Welcome car and truck users   Car Ads USA
• [PATCH RFC 0/3] coresight: enable debug module   Leo Yan
  • [PATCH RFC 1/3] coresight: binding for coresight debug driver   Leo Yan
    • [PATCH RFC 1/3] coresight: binding for coresight debug driver   Mark Rutland
    • [PATCH RFC 1/3] coresight: binding for coresight debug driver   Mathieu Poirier
      • [PATCH RFC 1/3] coresight: binding for coresight debug driver   Leo Yan
  • [PATCH RFC 2/3] coresight: add support for debug module   Leo Yan
    • [PATCH RFC 2/3] coresight: add support for debug module   Mark Rutland
      • [PATCH RFC 2/3] coresight: add support for debug module   Mathieu Poirier
    • [PATCH RFC 2/3] coresight: add support for debug module   Mark Rutland
      • [PATCH RFC 2/3] coresight: add support for debug module   Leo Yan
    • [PATCH RFC 2/3] coresight: add support for debug module   Mathieu Poirier
      • [PATCH RFC 2/3] coresight: add support for debug module   Leo Yan
  • [PATCH RFC 3/3] arm64: dts: register Hi6220's coresight debug module   Leo Yan
    • [PATCH RFC 3/3] arm64: dts: register Hi6220's coresight debug module   Mathieu Poirier
  • [PATCH RFC 0/3] coresight: enable debug module   Leo Yan
• [PATCH v3 1/2] mtd: ifc: Update dependency of IFC for LS1021A   Alison Wang
  • [PATCH v3 2/2] mtd: nand: Update dependency of IFC for LS1021A   Alison Wang
  • [PATCH v3 1/2] mtd: ifc: Update dependency of IFC for LS1021A   Boris Brezillon
    • [PATCH v3 1/2] mtd: ifc: Update dependency of IFC for LS1021A   Alison Wang
      • [PATCH v3 1/2] mtd: ifc: Update dependency of IFC for LS1021A   Boris Brezillon
      • [PATCH v3 1/2] mtd: ifc: Update dependency of IFC for LS1021A   Alison Wang
• Question about PTE_CONT in linux_4.10   Wangxuefeng (E)
  • Question about PTE_CONT in linux_4.10   Ard Biesheuvel
  • Question about PTE_CONT in linux_4.10   Mark Rutland
• [PATCH v1 1/3] ASoC: zx-tdm: add documentation for zte's tdm controller   Baoyou Xie
  • [PATCH v1 2/3] MAINTAINERS: add zte tdm controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v1 3/3] ASoC: zx-tdm: add zte's tdm controller driver   Baoyou Xie
    • [PATCH v1 3/3] ASoC: zx-tdm: add zte's tdm controller driver   Shawn Guo
  • [PATCH v1 1/3] ASoC: zx-tdm: add documentation for zte's tdm controller   Shawn Guo
• [PATCH 00/15] clk: ti: cleanups / fixes for preparation of clkctrl clocks   Tero Kristo
  • [PATCH 01/15] clk: ti: remove un-used definitions from public clk_hw_omap struct   Tero Kristo
  • [PATCH 02/15] clk: ti: add support for automatic clock alias generation   Tero Kristo
  • [PATCH 03/15] clk: ti: add API for creating aliases automatically for simple clock types   Tero Kristo
  • [PATCH 04/15] clk: ti: use automatic clock alias generation framework   Tero Kristo
  • [PATCH 05/15] clk: ti: add clkdm_lookup to the exported functions   Tero Kristo
  • [PATCH 06/15] clk: ti: move omap2_init_clk_clkdm under TI clock driver   Tero Kristo
  • [PATCH 07/15] clk: ti: enforce const types on string arrays   Tero Kristo
  • [PATCH 08/15] clk: ti: omap4: cleanup unnecessary clock aliases   Tero Kristo
  • [PATCH 09/15] clk: ti: drop unnecessary MEMMAP_ADDRESSING flag   Tero Kristo
  • [PATCH 10/15] clk: ti: mux: convert TI mux clock to use its internal data representation   Tero Kristo
  • [PATCH 11/15] clk: ti: divider: convert TI divider clock to use its own data representation   Tero Kristo
  • [PATCH 12/15] clk: ti: divider: add driver internal API for parsing divider data   Tero Kristo
  • [PATCH 13/15] clk: ti: gate: export gate_clk_ops locally   Tero Kristo
  • [PATCH 14/15] clk: ti: dpll44xx: fix clksel register initialization   Tero Kristo
  • [PATCH 15/15] clk: ti: convert to use proper register definition for all accesses   Tero Kristo
• [RFC PATCH 01/33] irqchip/gic-v3: Add redistributor iterator   Thomas Gleixner
  • [RFC PATCH 01/33] irqchip/gic-v3: Add redistributor iterator   Shanker Donthineni
  • [RFC PATCH 01/33] irqchip/gic-v3: Add redistributor iterator   Auger Eric
• [RFC PATCH 02/33] irqchip/gic-v3: Add VLPI/DirectLPI discovery   Thomas Gleixner
  • [RFC PATCH 02/33] irqchip/gic-v3: Add VLPI/DirectLPI discovery   Shanker Donthineni
  • [RFC PATCH 02/33] irqchip/gic-v3: Add VLPI/DirectLPI discovery   Auger Eric
• [PATCH] mtd: nand: tango: Enforce DMA direction type   Boris Brezillon
  • [PATCH] mtd: nand: tango: Enforce DMA direction type   Richard Weinberger
  • [PATCH] mtd: nand: tango: Enforce DMA direction type   Marc Gonzalez
    • [PATCH] mtd: nand: tango: Enforce DMA direction type   Boris Brezillon
      • [PATCH v2] mtd: nand: tango: Enforce DMA direction type   Marc Gonzalez
• [RFC PATCH 03/33] irqchip/gic-v3-its: Refactor command encoding   Thomas Gleixner
  • [RFC PATCH 03/33] irqchip/gic-v3-its: Refactor command encoding   Auger Eric
• [RFC PATCH 04/33] irqchip/gic-v3-its: Move LPI definitions around   Thomas Gleixner
  • [RFC PATCH 04/33] irqchip/gic-v3-its: Move LPI definitions around   Auger Eric
• [RFC PATCH 05/33] irqchip/gic-v3-its: Zero command on allocation   Thomas Gleixner
• [RFC PATCH 06/33] irqchip/gic-v3-its: Add probing for VLPI properties   Thomas Gleixner
  • [RFC PATCH 06/33] irqchip/gic-v3-its: Add probing for VLPI properties   Shanker Donthineni
  • [RFC PATCH 06/33] irqchip/gic-v3-its: Add probing for VLPI properties   Auger Eric
• [RFC PATCH 07/33] irqchip/gic-v3-its: Macro-ize its_send_single_command   Thomas Gleixner
  • [RFC PATCH 07/33] irqchip/gic-v3-its: Macro-ize its_send_single_command   Auger Eric
  • [RFC PATCH 07/33] irqchip/gic-v3-its: Macro-ize its_send_single_command   Auger Eric
• [RFC PATCH 08/33] irqchip/gic-v3-its: Implement irq_set_irqchip_state for pending state   Thomas Gleixner
  • [RFC PATCH 08/33] irqchip/gic-v3-its: Implement irq_set_irqchip_state for pending state   Auger Eric
  • [RFC PATCH 08/33] irqchip/gic-v3-its: Implement irq_set_irqchip_state for pending state   Auger Eric
• [RFC PATCH 09/33] irqchip/gic-v3-its: Split out property table allocation   Thomas Gleixner
  • [RFC PATCH 09/33] irqchip/gic-v3-its: Split out property table allocation   Auger Eric
  • [RFC PATCH 09/33] irqchip/gic-v3-its: Split out property table allocation   Prakash B
• [RFC PATCH 10/33] irqchip/gic-v4-its: Allow use of indirect VCPU tables   Thomas Gleixner
  • [RFC PATCH 10/33] irqchip/gic-v4-its: Allow use of indirect VCPU tables   Shanker Donthineni
  • [RFC PATCH 10/33] irqchip/gic-v4-its: Allow use of indirect VCPU tables   Auger Eric
• [RFC PATCH 11/33] irqchip/gic-v3-its: Split out pending table allocation   Thomas Gleixner
  • [RFC PATCH 11/33] irqchip/gic-v3-its: Split out pending table allocation   Shanker Donthineni
• [RFC PATCH 12/33] irqchip/gic-v3-its: Rework LPI freeing   Thomas Gleixner
• [RFC PATCH 13/33] irqchip/gic-v3-its: Generalize device table allocation   Thomas Gleixner
• [RFC PATCH 14/33] irqchip/gic-v3-its: Generalize LPI configuration   Thomas Gleixner
• [RFC PATCH 15/33] irqchip/gic-v4: Add management structure definitions   Thomas Gleixner
• [RFC PATCH 16/33] irqchip/gic-v3-its: Add GICv4 ITS command definitions   Thomas Gleixner
• [RFC PATCH 17/33] irqchip/gic-v3-its: Add VLPI configuration hook   Thomas Gleixner
  • [RFC PATCH 17/33] irqchip/gic-v3-its: Add VLPI configuration hook   Shanker Donthineni
• [RFC PATCH 19/33] irqchip/gic-v3-its: Add VLPI configuration handling   Thomas Gleixner
• [RFC PATCH 20/33] irqchip/gic-v3-its: Add VPE domain infrastructure   Thomas Gleixner
• [RFC PATCH 21/33] irqchip/gic-v3-its: Add VPE irq domain allocation/teardown   Thomas Gleixner
  • [RFC PATCH 21/33] irqchip/gic-v3-its: Add VPE irq domain allocation/teardown   Shanker Donthineni
• [RFC PATCH 22/33] irqchip/gic-v3-its: Add VPE irq domain [de]activation   Thomas Gleixner
• [RFC PATCH 23/33] irqchip/gic-v3-its: Add VPENDBASER/VPROPBASER accessors   Thomas Gleixner
  • [RFC PATCH 23/33] irqchip/gic-v3-its: Add VPENDBASER/VPROPBASER accessors   Shanker Donthineni
• [RFC PATCH 24/33] irqchip/gic-v3-its: Add VPE scheduling   Thomas Gleixner
  • [RFC PATCH 24/33] irqchip/gic-v3-its: Add VPE scheduling   Shanker Donthineni
  • [RFC PATCH 24/33] irqchip/gic-v3-its: Add VPE scheduling   Shanker Donthineni
• [RFC PATCH 25/33] irqchip/gic-v3-its: Add VPE invalidation hook   Thomas Gleixner
• [RFC PATCH 26/33] irqchip/gic-v3-its: Add VPE affinity changes   Thomas Gleixner
• [RFC PATCH 27/33] irqchip/gic-v3-its: Add VPE interrupt masking   Thomas Gleixner
• [PATCH 0/7] Rename RK1108 to RV1108   Andy Yan
  • [PATCH 1/7] dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108   Andy Yan
    • [PATCH 1/7] dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108   Ulf Hansson
    • [PATCH 1/7] dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108   Rob Herring
      • [PATCH 1/7] dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108   Heiko Stuebner
    • [PATCH 1/7] dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108   Heiko Stuebner
  • [PATCH 2/7] dt-bindings: rk1108-cru: rename RK1108 to RV1108   Andy Yan
    • [PATCH 2/7] dt-bindings: rk1108-cru: rename RK1108 to RV1108   Rob Herring
  • [PATCH 3/7] clk: rockchip: rename RK1108 to RV1108   Andy Yan
  • [PATCH 4/7] dt-bindings: rockchip,pinctrl: rename RK1108 to RV1108   Andy Yan
    • [PATCH 4/7] dt-bindings: rockchip,pinctrl: rename RK1108 to RV1108   Rob Herring
    • [PATCH 4/7] dt-bindings: rockchip, pinctrl: rename RK1108 to RV1108   Heiko Stuebner
  • [PATCH 5/7] pinctrl: rockchip: rename RK1108 to RV1108   Andy Yan
    • [PATCH 5/7] pinctrl: rockchip: rename RK1108 to RV1108   Heiko Stuebner
  • [PATCH 6/7] ARM: dts: rename RK1108 to RV1108   Andy Yan
  • [PATCH 7/7] ARM: rockchip: reanme RK1108 to RV1108   Andy Yan
    • [PATCH 7/7] ARM: rockchip: reanme RK1108 to RV1108   Rob Herring
  • [PATCH 0/7] Rename RK1108 to RV1108   Heiko Stuebner
    • [PATCH 0/7] Rename RK1108 to RV1108   Andy Yan
      • [PATCH 0/7] Rename RK1108 to RV1108   Linus Walleij
      • [PATCH 0/7] Rename RK1108 to RV1108   Heiko Stuebner
• [PATCH] ARM: dts: at91: Fix matrix compatible   Boris Brezillon
  • [PATCH] ARM: dts: at91: Fix matrix compatible   Alexandre Belloni
• [PATCH/RESEND] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Geert Uytterhoeven
  • [PATCH/RESEND] arm64: defconfig: Enlarge CMA alignment to 2 MiB   Will Deacon
• [RFC PATCH 28/33] irqchip/gic-v3-its: Support VPE doorbell invalidation even when !DirectLPI   Thomas Gleixner
  • [RFC PATCH 28/33] irqchip/gic-v3-its: Support VPE doorbell invalidation even when !DirectLPI   Shanker Donthineni
• [RFC PATCH 29/33] irqchip/gic-v4: Add per-VM VPE domain creation   Thomas Gleixner
• [RFC PATCH 30/33] irqchip/gic-v4: Add VPE command interface   Thomas Gleixner
• [RFC PATCH 31/33] irqchip/gic-v4: Add VLPI configuration interface   Thomas Gleixner
• [RFC PATCH 32/33] irqchip/gic-v4: Add some basic documentation   Thomas Gleixner
• [RFC PATCH 33/33] irqchip/gic-v4: Enable low-level GICv4 operations   Thomas Gleixner
• [RFC PATCH 00/33] irqchip: Core support for GICv4   Thomas Gleixner
• [PATCH] spi/sun6i: Add Master Sample Data Mode for SPI   Vinicius Maciel
  • [PATCH] spi/sun6i: Add Master Sample Data Mode for SPI   Mark Brown
    • [PATCH] spi/sun6i: Add Master Sample Data Mode for SPI   Mark Brown
• [PATCH] mm: free reserved area's memmap if possiable   Will Deacon
  • [PATCH] mm: free reserved area's memmap if possiable   Russell King - ARM Linux
  • [PATCH] mm: free reserved area's memmap if possiable   zhouxianrong at huawei.com
    • [PATCH] mm: free reserved area's memmap if possiable   zhouxianrong
    • [PATCH] mm: free reserved area's memmap if possiable   Ard Biesheuvel
      • [PATCH] mm: free reserved area's memmap if possiable   zhouxianrong
      • [PATCH] mm: free reserved area's memmap if possiable   Ard Biesheuvel
      • [PATCH] mm: free reserved area's memmap if possiable   zhouxianrong
• [PATCH v3] arm64: use is_vmalloc_addr   Miles Chen
• [PATCH 4.9 31/60] ARM: 8642/1: LPAE: catch pending imprecise abort on unmask   Greg Kroah-Hartman
• [PATCH 4.4 11/20] ARM: 8642/1: LPAE: catch pending imprecise abort on unmask   Greg Kroah-Hartman
• clk: ti: clkctrl clock support   Tero Kristo
  • [PATCH 2/6] dt-bindings: clk: add omap4 clkctrl definitions   Tero Kristo
    • [PATCH 2/6] dt-bindings: clk: add omap4 clkctrl definitions   Tero Kristo
  • [PATCH 3/6] clk: ti: omap4: add clkctrl clock data   Tero Kristo
  • [PATCH 4/6] ARM: OMAP2+: hwmod: assign hwmod-ck as main clock from DT if available   Tero Kristo
  • [PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data   Tero Kristo
  • [PATCH DO NOT MERGE 6/6] ARM: OMAP4: hwmod_data: drop a few clkctrl setups replaced with clocks   Tero Kristo
  • clk: ti: clkctrl clock support   Tony Lindgren
• [PATCH 1/6] clk: ti: add support for clkctrl clocks   Tero Kristo
• [stericsson:mmc-no-NULL 32/34] include/linux/blk_types.h:209:8: error: dereferencing pointer to incomplete type 'struct request'   kbuild test robot
• [stericsson:mmc-no-NULL 34/34] include/linux/blk-mq.h:118:2: error: unknown type name 'softirq_done_fn'   kbuild test robot
• [PATCH V6 4/5] LPC: Support the device-tree LPC host on Hip06/Hip07   zhichang.yuan
  • [PATCH V6 4/5] LPC: Support the device-tree LPC host on Hip06/Hip07   Alexander Graf
    • [PATCH V6 4/5] LPC: Support the device-tree LPC host on Hip06/Hip07   zhichang.yuan
      • [PATCH V6 4/5] LPC: Support the device-tree LPC host on Hip06/Hip07   Alexander Graf
      • [PATCH V6 4/5] LPC: Support the device-tree LPC host on Hip06/Hip07   zhichang.yuan
• [PATCH v1] nvmem: i.MX IIM driver   Sascha Hauer
  • [PATCH 1/2] nvmem: Add driver for the i.MX IIM   Sascha Hauer
    • [PATCH 1/2] nvmem: Add driver for the i.MX IIM   kbuild test robot
      • [PATCH 1/2] nvmem: Add driver for the i.MX IIM   Sascha Hauer
• [PATCH 2/2] dt-bindings: nvmem: Add i.MX IIM binding doc   Sascha Hauer
• [PATCH v2] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
  • [PATCH v2] soc/imx: Add GPCv2 power gating driver   Andrey Smirnov
  • [PATCH v2] reset: Add i.MX7 SRC reset driver   Philipp Zabel
    • [PATCH v2] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
      • [PATCH v2] reset: Add i.MX7 SRC reset driver   Philipp Zabel
      • [PATCH v2] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
      • [PATCH v2] reset: Add i.MX7 SRC reset driver   Philipp Zabel
      • [PATCH v2] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
• [PATCH] ARM: ep93xx: switch to SPARSEMEM   H Hartley Sweeten
• [RFC v2 0/7] Add STM32 DFSDM support   Arnaud Pouliquen
  • [RFC v2 1/7] iio: Add hardware consumer support   Arnaud Pouliquen
    • [RFC v2 1/7] iio: Add hardware consumer support   Jonathan Cameron
  • [RFC v2 2/7] IIO: Add bindings for simple sigma delta adc   Arnaud Pouliquen
    • [RFC v2 2/7] IIO: Add bindings for simple sigma delta adc   Rob Herring
      • [RFC v2 2/7] IIO: Add bindings for simple sigma delta adc   Arnaud Pouliquen
  • [RFC v2 3/7] IIO: ADC: add sigma delta modulator support   Arnaud Pouliquen
    • [RFC v2 3/7] IIO: ADC: add sigma delta modulator support   Jonathan Cameron
  • [RFC v2 5/7] ASoC: stm32: add DFSDM DAI support   Arnaud Pouliquen
    • [RFC v2 5/7] ASoC: stm32: add DFSDM DAI support   Mark Brown
      • [RFC v2 5/7] ASoC: stm32: add DFSDM DAI support   Arnaud Pouliquen
      • [RFC v2 5/7] ASoC: stm32: add DFSDM DAI support   Mark Brown
      • [RFC v2 5/7] ASoC: stm32: add DFSDM DAI support   Jonathan Cameron
      • [RFC v2 5/7] ASoC: stm32: add DFSDM DAI support   Arnaud Pouliquen
  • [RFC v2 6/7] IIO: add bindings for stm32 DFSDM filter   Arnaud Pouliquen
    • [RFC v2 6/7] IIO: add bindings for stm32 DFSDM filter   Jonathan Cameron
      • [RFC v2 6/7] IIO: add bindings for stm32 DFSDM filter   Arnaud Pouliquen
    • [RFC v2 6/7] IIO: add bindings for stm32 DFSDM filter   Rob Herring
      • [RFC v2 6/7] IIO: add bindings for stm32 DFSDM filter   Arnaud Pouliquen
• [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Arnaud Pouliquen
  • [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Mark Brown
    • [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Arnaud Pouliquen
      • [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Mark Brown
      • [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Arnaud Pouliquen
      • [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Mark Brown
      • [RFC v2 4/7] ASoC: dmaengine_pcm: add copy support   Arnaud Pouliquen
• [RFC v2 7/7] IIO: ADC: add stm32 DFSDM support   Arnaud Pouliquen
  • [RFC v2 7/7] IIO: ADC: add stm32 DFSDM support   Jonathan Cameron
    • [RFC v2 7/7] IIO: ADC: add stm32 DFSDM support   Arnaud Pouliquen
• [stericsson:mmc-no-NULL 29/34] ERROR: "mmc_blk_rw_done" [drivers/mmc/core/mmc_core.ko] undefined!   kbuild test robot
• [PATCH v4 0/4] Fixes for colorspace logic in exynos-gsc and s5p-mfc drivers   Thibault Saunier
  • [PATCH v4 2/4] [media] exynos-gsc: Respect userspace colorspace setting in try_fmt   Thibault Saunier
    • [PATCH v4 2/4] [media] exynos-gsc: Respect userspace colorspace setting in try_fmt   Andrzej Hajda
  • [PATCH v4 3/4] [media] s5p-mfc: Set colorspace in VIDIO_{G, TRY}_FMT if DEFAULT provided   Thibault Saunier
  • [PATCH v4 4/4] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Thibault Saunier
    • [PATCH v4 4/4] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Andrzej Hajda
• [PATCH v4 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Thibault Saunier
  • [PATCH v4 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Fabien DESSENNE
  • [PATCH v4 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Andrzej Hajda
    • [PATCH v4 1/4] [media] exynos-gsc: Use 576p instead 720p as a threshold for colorspaces   Thibault Saunier
• [PATCH 1/2] staging: bcm2835-audio: Removed error due to trailing statement   Abhijit Naik
  • [PATCH 2/2] staging: bcm2835-audio: Fixed checkpatch warning due to line spacing   Abhijit Naik
• [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
  • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
    • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Andrew F. Davis
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Andrew F. Davis
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Andrew F. Davis
      • [PATCH] ARM: omap2+: Revert omap-smp.c changes resetting cpu1 during boot   Tony Lindgren
• [PATCH] clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock   Chen-Yu Tsai
  • [PATCH] clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock   Bob Ham
    • [PATCH] clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock   Maxime Ripard
  • [PATCH] clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock   Maxime Ripard
• [RFC/PATCH] of: Mark property::value as const   Stephen Boyd
  • [RFC/PATCH] of: Mark property::value as const   Rob Herring
  • [RFC/PATCH] of: Mark property::value as const   Frank Rowand
    • [RFC/PATCH] of: Mark property::value as const   Frank Rowand
      • [RFC/PATCH] of: Mark property::value as const   Rob Herring
      • [RFC/PATCH] of: Mark property::value as const   Frank Rowand
    • [RFC/PATCH] of: Mark property::value as const   Frank Rowand
  • [RFC/PATCH] of: Mark property::value as const   Frank Rowand
    • [RFC/PATCH] of: Mark property::value as const   Frank Rowand
    • [RFC/PATCH] of: Mark property::value as const   Rob Herring
• [PATCH v3 0/3] Add Mediatek CIRQ interrupt controller   Youlin Pei
  • [PATCH v3 1/3] binding: irqchip: mtk-cirq: Add binding document   Youlin Pei
    • [PATCH v3 1/3] binding: irqchip: mtk-cirq: Add binding document   Rob Herring
  • [PATCH v3 2/3] irqchip: mtk-cirq: Add mediatek mtk-cirq implement   Youlin Pei
  • [PATCH v3 3/3] ARM: dts: mt2701: Add mtk-cirq node for mt2701   Youlin Pei
• [PATCH 0/4] ARM64: Initial Realtek RTD1295 enablement   Andreas Färber
  • [PATCH 4/4] ARM64: dts: Prepare Realtek RTD1295 and Zidoo X9S   Andreas Färber
    • [PATCH 4/4] ARM64: dts: Prepare Realtek RTD1295 and Zidoo X9S   Andreas Färber
  • [PATCH 0/4] ARM64: Initial Realtek RTD1295 enablement   Arnd Bergmann
• [PATCH 1/4] Documentation: devicetree: Add vendor prefix for Zidoo   Andreas Färber
  • [PATCH 1/4] Documentation: devicetree: Add vendor prefix for Zidoo   Rob Herring
• [PATCH 2/4] Documentation: devicetree: arm: Add Realtek RTD1295 bindings   Andreas Färber
  • [PATCH 2/4] Documentation: devicetree: arm: Add Realtek RTD1295 bindings   Rob Herring
    • [PATCH 2/4] Documentation: devicetree: arm: Add Realtek RTD1295 bindings   Andreas Färber
• [PATCH 3/4] ARM64: Prepare Realtek RTD1295   Andreas Färber
• [PATCH 0/5] clk: sunxi-ng: Add support for A83T CCU   Chen-Yu Tsai
  • [PATCH 1/5] clk: sunxi-ng: mp: Adjust parent rate for pre-dividers   Chen-Yu Tsai
    • [PATCH 1/5] clk: sunxi-ng: mp: Adjust parent rate for pre-dividers   Maxime Ripard
  • [PATCH 2/5] clk: sunxi-ng: gate: Support common pre-dividers   Chen-Yu Tsai
    • [PATCH 2/5] clk: sunxi-ng: gate: Support common pre-dividers   Maxime Ripard
  • [PATCH 3/5] clk: sunxi-ng: Add compatible string for A83T CCU to bindings   Chen-Yu Tsai
  • [PATCH 4/5] clk: sunxi-ng: Add driver for A83T CCU   Chen-Yu Tsai
    • [PATCH 4/5] clk: sunxi-ng: Add driver for A83T CCU   Maxime Ripard
      • [PATCH 4/5] clk: sunxi-ng: Add driver for A83T CCU   Chen-Yu Tsai
      • [PATCH 4/5] clk: sunxi-ng: Add driver for A83T CCU   Maxime Ripard
  • [PATCH 5/5] ARM: dts: sun8i-a83t: Add CCU device nodes   Chen-Yu Tsai
• [RESEND PATCH v4 0/2] Broadcom FlexRM ring manager support   Anup Patel
  • [RESEND PATCH v4 1/2] mailbox: Add driver for Broadcom FlexRM ring manager   Anup Patel
  • [RESEND PATCH v4 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager   Anup Patel
• [PATCH v4 0/4] Broadcom SBA RAID support   Anup Patel
  • [PATCH v4 1/4] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position   Anup Patel
  • [PATCH v4 2/4] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()   Anup Patel
  • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
    • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Dan Williams
      • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
      • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Dan Williams
      • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
      • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Dan Williams
      • [PATCH v4 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
  • [PATCH v4 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver   Anup Patel
• Debug kernel oops   Madhu K
  • Debug kernel oops   Joshua Clayton
• [bug report] mm: wire up GFP flag passing in dma_alloc_from_contiguous   Dan Carpenter
• [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Ralph Sennhauser
  • [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Imre Kaloz
  • [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Andrew Lunn
  • [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Jason Cooper
    • [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Ralph Sennhauser
  • [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Rob Herring
    • [PATCH] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Russell King - ARM Linux
• [PATCH 0/2] Add AXI address filter support for MMDC profiling   Tiberiu Breana
  • [PATCH 1/2] Fix mmdc_pmu_write_accesses event definition   Tiberiu Breana
    • [PATCH 1/2] Fix mmdc_pmu_write_accesses event definition   Zhi Li
  • [PATCH 2/2] Add AXI address filter support for MMDC profiling   Tiberiu Breana
• [PATCH 0/5] Add Spreadtrum SP9860G support   Chunyan Zhang
  • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
    • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Mark Rutland
      • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
    • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Sudeep Holla
      • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
      • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Sudeep Holla
      • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
      • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Sudeep Holla
      • [PATCH 1/5] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
  • [PATCH 2/5] Documentation: sprd: Add bindings for SP9860G   Chunyan Zhang
  • [PATCH 3/5] devicetree: bindings: revise compatible string of sprd uart   Chunyan Zhang
    • [PATCH 3/5] devicetree: bindings: revise compatible string of sprd uart   Rob Herring
  • [PATCH 4/5] sprd_serial: switch comptible string to sc-uart   Chunyan Zhang
    • [PATCH 4/5] sprd_serial: switch comptible string to sc-uart   Arnd Bergmann
      • [PATCH 4/5] sprd_serial: switch comptible string to sc-uart   Chunyan Zhang
  • [PATCH 5/5] serial: sprd: adjust TIMEOUT to a big value   Chunyan Zhang
• [PATCH v3 00/18] add support for AXP20X and AXP22X power supply drivers   Quentin Schulz
  • [PATCH v3 03/18] mfd: axp20x: correct name of temperature data ADC registers   Quentin Schulz
  • [PATCH v3 04/18] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs   Quentin Schulz
    • [PATCH v3 04/18] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs   Jonathan Cameron
      • [PATCH v3 04/18] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs   Quentin Schulz
      • [PATCH v3 04/18] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs   Jonathan Cameron
    • [PATCH v3 04/18] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs   Chen-Yu Tsai
  • [PATCH v3 05/18] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs   Quentin Schulz
    • [PATCH v3 05/18] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs   Lee Jones
      • [PATCH v3 05/18] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs   Chen-Yu Tsai
  • [PATCH v3 06/18] mfd: axp20x: add AC power supply cells for AXP22X PMICs   Quentin Schulz
  • [PATCH v3 07/18] ARM: dtsi: axp209: add AC power supply subnode   Quentin Schulz
  • [PATCH v3 08/18] ARM: dtsi: axp22x: add AC power supply subnode   Quentin Schulz
  • [PATCH v3 09/18] ARM: dts: sun8i: sina33: enable ACIN power supply subnode   Quentin Schulz
  • [PATCH v3 10/18] ARM: sun5i: chip: enable ACIN power supply subnode   Quentin Schulz
  • [PATCH v3 11/18] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding   Quentin Schulz
    • [PATCH v3 11/18] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding   Chen-Yu Tsai
      • [PATCH v3 11/18] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding   Quentin Schulz
  • [PATCH v3 12/18] mfd: axp20x: add CHRG_CTRL1/2/3 to writeable regs for AXP20X/AXP22X   Quentin Schulz
  • [PATCH v3 13/18] power: supply: add battery driver for AXP20X and AXP22X PMICs   Quentin Schulz
    • [PATCH v3 13/18] power: supply: add battery driver for AXP20X and AXP22X PMICs   Chen-Yu Tsai
      • [PATCH v3 13/18] power: supply: add battery driver for AXP20X and AXP22X PMICs   Quentin Schulz
      • [PATCH v3 13/18] power: supply: add battery driver for AXP20X and AXP22X PMICs   Chen-Yu Tsai
  • [PATCH v3 14/18] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver   Quentin Schulz
    • [PATCH v3 14/18] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver   Chen-Yu Tsai
  • [PATCH v3 15/18] ARM: dtsi: axp209: add battery power supply subnode   Quentin Schulz
    • [PATCH v3 15/18] ARM: dtsi: axp209: add battery power supply subnode   Chen-Yu Tsai
  • [PATCH v3 16/18] ARM: dtsi: axp22x: add battery power supply subnode   Quentin Schulz
    • [PATCH v3 16/18] ARM: dtsi: axp22x: add battery power supply subnode   Chen-Yu Tsai
  • [PATCH v3 17/18] ARM: dts: sun8i: sina33: enable battery power supply subnode   Quentin Schulz
    • [PATCH v3 17/18] ARM: dts: sun8i: sina33: enable battery power supply subnode   Chen-Yu Tsai
      • [PATCH v3 17/18] ARM: dts: sun8i: sina33: enable battery power supply subnode   Quentin Schulz
  • [PATCH v3 18/18] ARM: sun5i: chip: enable battery power supply subnode   Quentin Schulz
    • [PATCH v3 18/18] ARM: sun5i: chip: enable battery power supply subnode   Chen-Yu Tsai
  • [PATCH v3 00/18] add support for AXP20X and AXP22X power supply drivers   Lee Jones
• [PATCH v3 01/18] dt-bindings: power: battery: add constant-charge-current property   Quentin Schulz
  • [PATCH v3 01/18] dt-bindings: power: battery: add constant-charge-current property   Liam Breck
    • [PATCH v3 01/18] dt-bindings: power: battery: add constant-charge-current property   Quentin Schulz
      • [PATCH v3 01/18] dt-bindings: power: battery: add constant-charge-current property   Liam Breck
      • [PATCH v3 01/18] dt-bindings: power: battery: add constant-charge-current property   Chen-Yu Tsai
  • [PATCH v3 01/18] dt-bindings: power: battery: add constant-charge-current property   Rob Herring
• [PATCH v3 02/18] power: supply: power_supply_core: add constant-current-charge optional property   Quentin Schulz
• [PATCH V3 0/2] Add support for RK3288 Tinker board   Eddie Cai
  • [PATCH V3 1/2] dt-bindings: add Asus Tinker board   Eddie Cai
  • [PATCH V3 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Eddie Cai
    • [PATCH V3 2/2] ARM: dts: rockchip: add dts for RK3288-Tinker board   Wadim Egorov
  • [PATCH V3 0/2] Add support for RK3288 Tinker board   Heiko Stuebner
• [PATCH RESEND 3/5] mtd: nand: Cleanup/rework the atmel_nand driver   Nicolas Ferre
  • [PATCH RESEND 3/5] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
• [PATCHv2 net-next 11/16] net: mvpp2: handle misc PPv2.1/PPv2.2 differences   Thomas Petazzoni
• [PATCHv2 2/3] clk: mvebu: adjust clock handling for the CP110 system controller   Thomas Petazzoni
  • [PATCHv2 2/3] clk: mvebu: adjust clock handling for the CP110 system controller   Stephen Boyd
    • [PATCHv2 2/3] clk: mvebu: adjust clock handling for the CP110 system controller   Thomas Petazzoni
• [PATCH 0/4 linux-next] usb: gadget: udc: atmel: Endpoint allocation scheme fixes   cristian.birsan at microchip.com
  • [PATCH 1/4 linux-next] usb: gadget: udc: atmel: Check fifo configuration values against device tree   cristian.birsan at microchip.com
  • [PATCH 2/4 linux-next] usb: gadget: udc: atmel: Minor code cleanup   cristian.birsan at microchip.com
  • [PATCH 3/4 linux-next] usb: gadget: udc: atmel: Use dev_warn() to display EP configuration error   cristian.birsan at microchip.com
  • [PATCH 4/4 linux-next] usb: gadget: udc: atmel: Update Kconfig help for fifo_mode = 0   cristian.birsan at microchip.com
  • [PATCH 0/4 linux-next] usb: gadget: udc: atmel: Endpoint allocation scheme fixes   Nicolas Ferre
• [PATCH 1/2] ARM: dts: BCM53573: Describe Tenda AC9 PCIe card in DT   Rafał Miłecki
  • [PATCH 2/2] ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED   Rafał Miłecki
• [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3   Adam Ford
  • [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3   Tony Lindgren
    • [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3   Tony Lindgren
    • [PATCH 10/14] ARM: OMAP2+: Remove legacy data from hwmod for omap3   Adam Ford
• [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller   Gregory CLEMENT
  • [PATCH v6 01/14] clk: apn806: Add eMMC clock to system controller driver   Gregory CLEMENT
  • [PATCH v6 05/14] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c   Gregory CLEMENT
  • [PATCH v6 06/14] mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c   Gregory CLEMENT
  • [PATCH v6 07/14] dt: bindings: Add bindings for Marvell Xenon SD Host Controller   Gregory CLEMENT
    • [PATCH v6 07/14] dt: bindings: Add bindings for Marvell Xenon SD Host Controller   Rob Herring
  • [PATCH v6 08/14] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality   Gregory CLEMENT
  • [PATCH v6 09/14] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC   Gregory CLEMENT
  • [PATCH v6 10/14] mmc: sdhci-xenon: Add SoC PHY PAD voltage control   Gregory CLEMENT
  • [PATCH v6 11/14] MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers   Gregory CLEMENT
  • [PATCH v6 12/14] arm64: dts: marvell: add eMMC support for Armada 37xx   Gregory CLEMENT
  • [PATCH v6 13/14] arm64: dts: marvell: add sdhci support for Armada 7K/8K   Gregory CLEMENT
  • [PATCH v6 14/14] arm64: configs: enable SDHCI driver for Xenon   Gregory CLEMENT
  • [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller   Gregory CLEMENT
    • [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller   Ulf Hansson
      • [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller   Ziji Hu
  • [PATCH v6 00/14] mmc: Add support to Marvell Xenon SD Host Controller   Russell King - ARM Linux
• [PATCH v6 02/14] clk: apn806: Turn the eMMC clock as optional for dts backwards compatible   Gregory CLEMENT
• [PATCH v6 03/14] mmc: core: Add mmc-card dt sub-node parse in core layer   Gregory CLEMENT
• [PATCH v6 04/14] mmc: sdhci: Export sdhci_set_ios() from sdhci.c   Gregory CLEMENT
• [RESEND][PATCH v2] ata: xgene: Enable NCQ support for APM X-Gene SATA controller hardware v1.1   Rameshwar Prasad Sahu
• [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Ralph Sennhauser
  • [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)   Gregory CLEMENT
• [PATCH v3 0/5] arm64: mmu: avoid writeable-executable mappings   Ard Biesheuvel
  • [PATCH v3 1/5] arm: kvm: move kvm_vgic_global_state out of .text section   Ard Biesheuvel
  • [PATCH v3 2/5] arm64: mmu: move TLB maintenance from callers to create_mapping_late()   Ard Biesheuvel
  • [PATCH v3 3/5] arm64: alternatives: apply boot time fixups via the linear mapping   Ard Biesheuvel
  • [PATCH v3 4/5] arm64: mmu: map .text as read-only from the outset   Ard Biesheuvel
  • [PATCH v3 5/5] arm64: mmu: apply strict permissions to .init.text and .init.data   Ard Biesheuvel
• [PATCH] clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399   Douglas Anderson
  • [PATCH] clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399   Javier Martinez Canillas
    • [PATCH] clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399   Doug Anderson
    • [PATCH] clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399   Heiko Stübner
    • [PATCH] clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399   Javier Martinez Canillas
  • [PATCH] clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399   Heiko Stuebner
• [PATCH 1/1] arm64: dts: r8a7795: add IMR-LX4 support   Sergei Shtylyov
  • [PATCH 1/1] arm64: dts: r8a7795: add IMR-LX4 support   Geert Uytterhoeven
  • [PATCH 1/1] arm64: dts: r8a7795: add IMR-LX4 support   Sergei Shtylyov
    • [PATCH 1/1] arm64: dts: r8a7795: add IMR-LX4 support   Sergei Shtylyov
• [PATCH 1/2] PCI: add QCOM root port quirks for ACS   Sinan Kaya
• [PATCH 2/2] iommu: add warning when sharing groups   Sinan Kaya
  • [PATCH 2/2] iommu: add warning when sharing groups   Alex Williamson
    • [PATCH 2/2] iommu: add warning when sharing groups   okaya at codeaurora.org
      • [PATCH 2/2] iommu: add warning when sharing groups   Alex Williamson
      • [PATCH 2/2] iommu: add warning when sharing groups   Sinan Kaya
      • [PATCH 2/2] iommu: add warning when sharing groups   Sinan Kaya
• [PATCH] arm64: fix warning about swapper_pg_dir overflow   Arnd Bergmann
  • [PATCH] arm64: fix warning about swapper_pg_dir overflow   Ard Biesheuvel
    • [PATCH] arm64: fix warning about swapper_pg_dir overflow   Arnd Bergmann
  • [PATCH] arm64: fix warning about swapper_pg_dir overflow   Mark Rutland
  • [PATCH] arm64: fix warning about swapper_pg_dir overflow   Will Deacon
• [PATCH] clk: sunxi: ccu-sun5i needs nkmp   Arnd Bergmann
  • [PATCH] clk: sunxi: ccu-sun5i needs nkmp   Maxime Ripard
• [PATCH] drm/rockchip: add extcon dependency for DP   Arnd Bergmann
  • [PATCH] drm/rockchip: add extcon dependency for DP   Guenter Roeck
  • [PATCH] drm/rockchip: add extcon dependency for DP   Mark yao
  • [PATCH] drm/rockchip: add extcon dependency for DP   Sean Paul
• [PATCH] arm64: include asm/assembler.h in entry-ftrace.S   Arnd Bergmann
  • [PATCH] arm64: include asm/assembler.h in entry-ftrace.S   Mark Rutland
  • [PATCH] arm64: include asm/assembler.h in entry-ftrace.S   Will Deacon
• [PATCH] arm64: define BUG() instruction without CONFIG_BUG   Arnd Bergmann
  • [PATCH] arm64: define BUG() instruction without CONFIG_BUG   Will Deacon
    • [PATCH] arm64: define BUG() instruction without CONFIG_BUG   Arnd Bergmann
• sDMA on i.mx7d   Alexandre Belloni
  • sDMA on i.mx7d   Stefan Agner
    • sDMA on i.mx7d   Fabio Estevam
    • sDMA on i.mx7d   Alexandre Belloni
      • sDMA on i.mx7d   Stefan Agner
      • sDMA on i.mx7d   Alexandre Belloni
      • sDMA on i.mx7d   Fabio Estevam
      • sDMA on i.mx7d   Alexandre Belloni
      • sDMA on i.mx7d   Lucas Stach
      • sDMA on i.mx7d   Alexandre Belloni
      • EXT: Re: sDMA on i.mx7d   Han, Nandor (GE Healthcare)
      • EXT: Re: sDMA on i.mx7d   Fabio Estevam
      • EXT: Re: sDMA on i.mx7d   Han, Nandor (GE Healthcare)
• [PATCH 10/14] phy: meson8b-usb2: simplify optional reset handling   Martin Blumenstingl
  • [PATCH 10/14] phy: meson8b-usb2: simplify optional reset handling   Jerome Brunet
    • [PATCH 10/14] phy: meson8b-usb2: simplify optional reset handling   Philipp Zabel
• [PATCH v2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
  • [PATCH v2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
    • [PATCH v2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Mark Rutland
    • [PATCH v2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
      • [PATCH v2] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
• [PATCH] soc: bcm: brcmstb: Match additional compatible strings   Florian Fainelli
  • [PATCH] soc: bcm: brcmstb: Match additional compatible strings   Florian Fainelli
• [PATCH 0/2] coresight: Replace sprintf with scnprintf + bug fix   Olav Haugan
  • [PATCH 1/2] coresight: Replace sprintf with scnprintf   Olav Haugan
  • [PATCH 2/2] coresight: etm3x: Correctly output counter values in sysfs node   Olav Haugan
  • [PATCH 0/2] coresight: Replace sprintf with scnprintf + bug fix   Mathieu Poirier
• [PATCH v2 0/2] Add i2c DT binding and device node for Mediatek MT2701 Soc   Jun Gao
  • [PATCH v2 2/2] arm: dts: mt2701: Add i2c device node   Jun Gao
• [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform   Jun Gao
  • [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform   Rob Herring
  • [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform   Rob Herring
• [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control   Chris Zhong
  • [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control   John Keeping
    • [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control   Chris Zhong
      • [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control   John Keeping
• [PATCH v2 11/11] drm/rockchip/dsi: fix insufficient bandwidth of some panel   Chris Zhong
• [PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Chris Zhong
  • [PATCH v7 1/7] dt-bindings: add rk3399 support for dw-mipi-rockchip   Chris Zhong
  • [PATCH v7 2/7] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Chris Zhong
• [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk   yuantian.tang at nxp.com
  • [PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on ls1012a   yuantian.tang at nxp.com
    • [PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on ls1012a   Scott Wood
      • [PATCH 2/2] clk: qoriq: Separate root input clock for core PLLs on ls1012a   Y.T. Tang
  • [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk   Y.T. Tang
  • [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk   Rob Herring
    • [PATCH 1/2] dt-bindings: qoriq-clock: Add coreclk   Y.T. Tang
• <Query> Looking more details and reasons for using orig_add_limit.   Sodagudi Prasad
  • <Query> Looking more details and reasons for using orig_add_limit.   Will Deacon
  • <Query> Looking more details and reasons for using orig_add_limit.   James Morse
    • <Query> Looking more details and reasons for using orig_add_limit.   Sodagudi Prasad
      • <Query> Looking more details and reasons for using orig_add_limit.   James Morse
      • <Query> Looking more details and reasons for using orig_add_limit.   Sodagudi Prasad
      • <Query> Looking more details and reasons for using orig_add_limit.   Laurent Pinchart
      • <Query> Looking more details and reasons for using orig_add_limit.   Mauro Carvalho Chehab
      • <Query> Looking more details and reasons for using orig_add_limit.   Laurent Pinchart
      • <Query> Looking more details and reasons for using orig_add_limit.   Mauro Carvalho Chehab
• [PATCH] mfd: stm32-timers: fix max register   Fabrice Gasnier
  • [PATCH] mfd: stm32-timers: fix max register   Benjamin Gaignard
• [PATCH 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Vladimir Murzin
  • [PATCH 1/7] dma: Take into account dma_pfn_offset   Vladimir Murzin
    • [PATCH 1/7] dma: Take into account dma_pfn_offset   Robin Murphy
      • [PATCH 1/7] dma: Take into account dma_pfn_offset   Vladimir Murzin
  • [PATCH 2/7] dma: Add simple dma_noop_mmap   Vladimir Murzin
  • [PATCH 3/7] drivers: dma-coherent: Account dma_pfn_offset when used with device tree   Vladimir Murzin
    • [PATCH 3/7] drivers: dma-coherent: Account dma_pfn_offset when used with device tree   Robin Murphy
      • [PATCH 3/7] drivers: dma-coherent: Account dma_pfn_offset when used with device tree   Vladimir Murzin
      • [PATCH 3/7] drivers: dma-coherent: Account dma_pfn_offset when used with device tree   Vladimir Murzin
      • [PATCH 3/7] drivers: dma-coherent: Account dma_pfn_offset when used with device tree   Robin Murphy
  • [PATCH 4/7] drivers: dma-coherent: Introduce default DMA pool   Vladimir Murzin
  • [PATCH 5/7] ARM: NOMMU: Introduce dma operations for noMMU   Vladimir Murzin
  • [PATCH 6/7] ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus   Vladimir Murzin
    • [PATCH 6/7] ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus   Robin Murphy
      • [PATCH 6/7] ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus   Vladimir Murzin
  • [PATCH 7/7] ARM: dma-mapping: Remove traces of NOMMU code   Vladimir Murzin
  • [PATCH 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Vladimir Murzin
    • [PATCH 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Robin Murphy
      • [PATCH 0/7] ARM: Fix dma_alloc_coherent() and friends for NOMMU   Vladimir Murzin
• [PATCH v1 1/3] ASoC: zx-96p22: add documentation for zte's aud96p22 controller   Baoyou Xie
  • [PATCH v1 2/3] MAINTAINERS: add zte 96p22 controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v1 3/3] ASoC: zx-96p22: add zte's aud96p22 controller driver   Baoyou Xie
    • [PATCH v1 3/3] ASoC: zx-96p22: add zte's aud96p22 controller driver   Charles Keepax
    • [PATCH v1 3/3] ASoC: zx-96p22: add zte's aud96p22 controller driver   Shawn Guo
  • [PATCH v1 1/3] ASoC: zx-96p22: add documentation for zte's aud96p22 controller   Shawn Guo
  • [PATCH v1 1/3] ASoC: zx-96p22: add documentation for zte's aud96p22 controller   Rob Herring
• [PATCH 01/13] mmc: bcm2835: add bcm2835_read_wait_sdcmd   Jeremy McNicoll
• [PATCH v2 0/2] Add AXI address filter support for MMDC profiling   andrei-tiberiu.breana at nxp.com
  • [PATCH v2 1/2] ARM: imx: Fix mmdc_pmu_write_accesses event definition   andrei-tiberiu.breana at nxp.com
    • [PATCH v2 1/2] ARM: imx: Fix mmdc_pmu_write_accesses event definition   Zhi Li
      • [PATCH v2 1/2] ARM: imx: Fix mmdc_pmu_write_accesses event definition   Zhi Li
  • [PATCH v2 2/2] ARM: imx: Add AXI address filter support for MMDC profiling   andrei-tiberiu.breana at nxp.com
    • [PATCH v2 2/2] ARM: imx: Add AXI address filter support for MMDC profiling   Zhi Li
• [PATCH 0/2] RFC: Move efi bgrt code out of arch/x86   Bhupesh Sharma
  • [PATCH 1/2] x86/efi-bgrt: Move efi-bgrt handling out of arch/x86   Bhupesh Sharma
  • [PATCH 2/2] bgrt: Make ACPI BGRT parsing code common for ARCHs   Bhupesh Sharma
  • [PATCH 0/2] RFC: Move efi bgrt code out of arch/x86   Ard Biesheuvel
    • [PATCH 0/2] RFC: Move efi bgrt code out of arch/x86   Rafael J. Wysocki
      • [PATCH 0/2] RFC: Move efi bgrt code out of arch/x86   Bhupesh Sharma
      • [PATCH 0/2] RFC: Move efi bgrt code out of arch/x86   Ard Biesheuvel
• [PATCH] reset-socfpga: Fix nr_resets property   Rojhalat Ibrahim
  • [PATCH] reset-socfpga: Fix nr_resets property   Philipp Zabel
    • [PATCH] reset-socfpga: Fix nr_resets property   Dinh Nguyen
• [PATCH 00/10] PCI: dwc: Rework and cleanup designware driver   Kishon Vijay Abraham I
  • [PATCH 01/10] PCI: dwc: designware: Move the register defines to designware header file   Kishon Vijay Abraham I
    • [PATCH 01/10] PCI: dwc: designware: Move the register defines to designware header file   Jingoo Han
  • [PATCH 02/10] PCI: dwc: *all*: Add platform_set_drvdata   Kishon Vijay Abraham I
  • [RFT PATCH 05/10] PCI: dwc: *all*: Split *struct pcie_port* into host only and core structures   Kishon Vijay Abraham I
  • [PATCH 06/10] PCI: dwc: designware: Parse *num-lanes* property in dw_pcie_setup_rc   Kishon Vijay Abraham I
  • [PATCH 00/10] PCI: dwc: Rework and cleanup designware driver   Bjorn Helgaas
• [PATCH 03/10] PCI: dwc: *all*: Rename cfg_read/cfg_write to read/write   Kishon Vijay Abraham I
• [PATCH 04/10] PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init   Kishon Vijay Abraham I
• [PATCH 07/10] PCI: dwc: designware: Fix style errors in pcie-designware.c   Kishon Vijay Abraham I
• [PATCH 08/10] PCI: dwc: Split pcie-designware.c into host and core files   Kishon Vijay Abraham I
• [PATCH 09/10] PCI: dwc: Create a new config symbol to enable pci dwc host   Kishon Vijay Abraham I
• [PATCH 10/10] PCI: dwc: Remove dependency of designware to CONFIG_PCI   Kishon Vijay Abraham I
• [PATCH 1/2] arm64: dts: marvell: remove msi-parent from PCIe on Armada 3700   Gregory CLEMENT
  • [PATCH 1/2] arm64: dts: marvell: remove msi-parent from PCIe on Armada 3700   Thomas Petazzoni
• [PATCH 0/2] arm64: head.S cleanup   Mark Rutland
  • [PATCH 1/2] arm64: reduce el2_setup branching   Mark Rutland
  • [PATCH 2/2] arm64: move !VHE work to end of el2_setup   Mark Rutland
• [PATCH] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI   Sekhar Nori
  • [PATCH] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI   Andrew F. Davis
    • [PATCH] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI   Tony Lindgren
• [PATCH v9 2/3] fpga manager: Add cyclone-ps-spi driver for Altera FPGAs   Anatolij Gustschin
  • [PATCH v9 2/3] fpga manager: Add cyclone-ps-spi driver for Altera FPGAs   Alan Tull
    • [PATCH v9 2/3] fpga manager: Add cyclone-ps-spi driver for Altera FPGAs   Joshua Clayton
• [RFC PATCH 0/3] arm64: eliminate early RWX mappings   Ard Biesheuvel
  • [RFC PATCH 1/3] arm64: mmu: restrict permissions of early kernel mappings   Ard Biesheuvel
  • [RFC PATCH 2/3] arm64: boot: align __inittext with swapper block on relocatable kernels   Ard Biesheuvel
  • [RFC PATCH 3/3] arm64: efi: use effective text offset when allocating Image   Ard Biesheuvel
• [PATCH] ARM: ep93xx: simone: let the mmc_spi driver handle the card detect   H Hartley Sweeten
• [PATCH] btwilink: fix platform_no_drv_owner.cocci warnings   kbuild test robot
• [xlnx:master 289/322] drivers/bluetooth/btwilink.c:350:3-8: No need to set .owner here. The core will do it.   kbuild test robot
• [PATCH 00/11] ARM: Initial Actions Semi S500 and S900 enablement   Andreas Färber
  • [PATCH 02/11] Documentation: devicetree: arm: Document Actions Semi S500   Andreas Färber
  • [PATCH 04/11] ARM64: Prepare Actions Semi S900   Andreas Färber
    • [PATCH 04/11] ARM64: Prepare Actions Semi S900   Arnd Bergmann
      • [PATCH 04/11] ARM64: Prepare Actions Semi S900   Andreas Färber
      • [PATCH 04/11] ARM64: Prepare Actions Semi S900   Arnd Bergmann
  • [PATCH 07/11] Documentation: kernel-parameters: Document owl earlycon   Andreas Färber
  • [PATCH 08/11] ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar   Andreas Färber
    • [PATCH 08/11] ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar   Mark Rutland
      • [PATCH 08/11] ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar   Andreas Färber
      • [PATCH 08/11] ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar   Mark Rutland
    • [PATCH 08/11] ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar   Andreas Färber
  • [PATCH 09/11] Documentation: devicetree: Add vendor prefix for uCRobotics   Andreas Färber
  • [PATCH 10/11] Documentation: devicetree: arm: Document Actions Semi S900   Andreas Färber
    • [PATCH 10/11] Documentation: devicetree: arm: Document Actions Semi S900   Rob Herring
  • [PATCH 11/11] ARM64: dts: Prepare Actions Semi S900 and Bubblegum-96   Andreas Färber
    • [PATCH 11/11] ARM64: dts: Prepare Actions Semi S900 and Bubblegum-96   Mark Rutland
      • [PATCH 11/11] ARM64: dts: Prepare Actions Semi S900 and Bubblegum-96   Andreas Färber
      • [PATCH 11/11] ARM64: dts: Prepare Actions Semi S900 and Bubblegum-96   Mark Rutland
  • [PATCH 00/11] ARM: Initial Actions Semi S500 and S900 enablement   Arnd Bergmann
• [PATCH 01/11] Documentation: devicetree: Add vendor prefix for Actions Semi   Andreas Färber
• [PATCH 03/11] ARM: Prepare Actions Semi S500   Andreas Färber
• [PATCH 05/11] Documentation: devicetree: serial: Document Actions Semi Owl UARTs   Andreas Färber
• [PATCH 06/11] tty: serial: Add Actions Semi Owl UART earlycon   Andreas Färber
  • [PATCH 06/11] tty: serial: Add Actions Semi Owl UART earlycon   Arnd Bergmann
    • [PATCH 06/11] tty: serial: Add Actions Semi Owl UART earlycon   Andreas Färber
      • [PATCH 06/11] tty: serial: Add Actions Semi Owl UART earlycon   Arnd Bergmann
• [PATCH 0/2] iio: allow to set STM32 ADC resolution   Fabrice Gasnier
  • [PATCH 2/2] iio: adc: stm32: add dt option to set resolution   Fabrice Gasnier
    • [PATCH 2/2] iio: adc: stm32: add dt option to set resolution   Jonathan Cameron
• [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Fabrice Gasnier
  • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Jonathan Cameron
    • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Fabrice Gasnier
      • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Jonathan Cameron
      • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Fabrice Gasnier
      • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Lars-Peter Clausen
      • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Fabrice Gasnier
      • [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution   Rob Herring
• [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Ard Biesheuvel
  • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Russell King - ARM Linux
    • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Ard Biesheuvel
      • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Russell King - ARM Linux
  • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Russell King - ARM Linux
    • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Ard Biesheuvel
      • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Russell King - ARM Linux
      • [PATCH v2 0/5] ARM: add module autoloading support for crypto modules   Ard Biesheuvel
• [PATCH V9 00/10] Add UEFI 2.6 and ACPI 6.1 updates for RAS on ARM64   Tyler Baicar
  • [PATCH V9 01/10] acpi: apei: read ack upon ghes record consumption   Tyler Baicar
  • [PATCH V9 02/10] ras: acpi/apei: cper: generic error data entry v3 per ACPI 6.1   Tyler Baicar
  • [PATCH V9 03/10] efi: parse ARM processor error   Tyler Baicar
  • [PATCH V9 04/10] arm64: exception: handle Synchronous External Abort   Tyler Baicar
  • [PATCH V9 05/10] acpi: apei: handle SEA notification type for ARMv8   Tyler Baicar
    • [PATCH V9 05/10] acpi: apei: handle SEA notification type for ARMv8   kbuild test robot
  • [PATCH V9 06/10] acpi: apei: panic OS with fatal error status block   Tyler Baicar
  • [PATCH V9 07/10] efi: print unrecognized CPER section   Tyler Baicar
  • [PATCH V9 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Tyler Baicar
  • [PATCH V9 09/10] trace, ras: add ARM processor error trace event   Tyler Baicar
    • [PATCH V9 09/10] trace, ras: add ARM processor error trace event   Steven Rostedt
    • [PATCH V9 09/10] trace, ras: add ARM processor error trace event   Baicar, Tyler
  • [PATCH V9 10/10] arm/arm64: KVM: add guest SEA support   Tyler Baicar
• [PATCH v3] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
  • [PATCH v3] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Timur Tabi
  • [PATCH v3] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Mark Rutland
    • [PATCH v3] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Greg Kroah-Hartman
      • [PATCH v3] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
• [PATCH v2] reset-socfpga: Fix nr_resets property   Rojhalat Ibrahim
  • [PATCH v2] reset-socfpga: Fix nr_resets property   Philipp Zabel
• [PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules   Ard Biesheuvel
  • [PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules   Arnd Bergmann
  • [PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules   Jon Hunter
    • [PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules   Ard Biesheuvel
• [PATCH V10 00/10] Add UEFI 2.6 and ACPI 6.1 updates for RAS on ARM64   Tyler Baicar
  • [PATCH V10 01/10] acpi: apei: read ack upon ghes record consumption   Tyler Baicar
  • [PATCH V10 02/10] ras: acpi/apei: cper: generic error data entry v3 per ACPI 6.1   Tyler Baicar
    • [PATCH V10 02/10] ras: acpi/apei: cper: generic error data entry v3 per ACPI 6.1   Ard Biesheuvel
  • [PATCH V10 03/10] efi: parse ARM processor error   Tyler Baicar
    • [PATCH V10 03/10] efi: parse ARM processor error   Ard Biesheuvel
  • [PATCH V10 04/10] arm64: exception: handle Synchronous External Abort   Tyler Baicar
  • [PATCH V10 05/10] acpi: apei: handle SEA notification type for ARMv8   Tyler Baicar
    • [PATCH V10 05/10] acpi: apei: handle SEA notification type for ARMv8   Ard Biesheuvel
      • [PATCH V10 05/10] acpi: apei: handle SEA notification type for ARMv8   Baicar, Tyler
  • [PATCH V10 06/10] acpi: apei: panic OS with fatal error status block   Tyler Baicar
  • [PATCH V10 07/10] efi: print unrecognized CPER section   Tyler Baicar
    • [PATCH V10 07/10] efi: print unrecognized CPER section   Joe Perches
      • [PATCH V10 07/10] efi: print unrecognized CPER section   Baicar, Tyler
    • [PATCH V10 07/10] efi: print unrecognized CPER section   James Morse
      • [PATCH V10 07/10] efi: print unrecognized CPER section   Baicar, Tyler
      • [PATCH V10 07/10] efi: print unrecognized CPER section   Joe Perches
      • [PATCH V10 07/10] efi: print unrecognized CPER section   Russell King - ARM Linux
      • [PATCH V10 07/10] efi: print unrecognized CPER section   James Morse
  • [PATCH V10 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Tyler Baicar
  • [PATCH V10 09/10] trace, ras: add ARM processor error trace event   Tyler Baicar
  • [PATCH V10 10/10] arm/arm64: KVM: add guest SEA support   Tyler Baicar
• [PATCH] ARM: uaccess: consistently check object sizes   Kees Cook
  • [PATCH] ARM: uaccess: consistently check object sizes   Mark Rutland
• [xlnx:master 117/322] drivers/gpu/drm/xylon/xylon_crtc.c:224:3: error: implicit declaration of function 'drm_vblank_put'   kbuild test robot
• [PATCH v3] ARM: wire up HWCAP2 feature bits to the CPU modalias   Ard Biesheuvel
  • [PATCH v3] ARM: wire up HWCAP2 feature bits to the CPU modalias   Ard Biesheuvel
• [PATCH v4] tty: pl011: Work around QDF2400 E44 stuck BUSY bit   Christopher Covington
• [PATCH 0/5] Add Arria10 System Manager Reset Controller   thor.thayer at linux.intel.com
  • [PATCH 2/5] dt-bindings: Add Arria10 System Resource reset manager offsets   thor.thayer at linux.intel.com
  • [PATCH 3/5] reset: Add Altera Arria10 System Resource Reset Controller   thor.thayer at linux.intel.com
    • [PATCH 3/5] reset: Add Altera Arria10 System Resource Reset Controller   Philipp Zabel
      • [PATCH 3/5] reset: Add Altera Arria10 System Resource Reset Controller   Thor Thayer
  • [PATCH 4/5] mfd: altr_a10sr: Add Arria10 DevKit Resource Controller   thor.thayer at linux.intel.com
  • [PATCH 5/5] ARM: socfpga: dts: Add Devkit A10-SR Reset Controller   thor.thayer at linux.intel.com
    • [PATCH 5/5] ARM: socfpga: dts: Add Devkit A10-SR Reset Controller   Dinh Nguyen
      • [PATCH 5/5] ARM: socfpga: dts: Add Devkit A10-SR Reset Controller   Thor Thayer
• [PATCH 1/5] dt-bindings: mfd: Add Altera Arria10 SR Reset Controller bindings   thor.thayer at linux.intel.com
• [PATCH] Documentation: Note QDF2400 SoC Erratum 44   Christopher Covington
  • [PATCH] Documentation: Note QDF2400 SoC Erratum 44   Will Deacon
• [PATCH] ARM: uaccess: fix zeroing of 64-bit get_user()   Kees Cook
• [PATCH] arm64: print a fault message when attempting to write RO memory   Stephen Boyd
  • [PATCH] arm64: print a fault message when attempting to write RO memory   Mark Rutland
    • [PATCH] arm64: print a fault message when attempting to write RO memory   Mark Rutland
    • [PATCH] arm64: print a fault message when attempting to write RO memory   Stephen Boyd
• [PATCH v4 00/36] i.MX Media Driver   Steve Longerbeam
  • [PATCH v4 02/36] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node   Steve Longerbeam
  • [PATCH v4 03/36] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections   Steve Longerbeam
  • [PATCH v4 04/36] ARM: dts: imx6qdl: add capture-subsystem device   Steve Longerbeam
  • [PATCH v4 05/36] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround   Steve Longerbeam
  • [PATCH v4 06/36] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors   Steve Longerbeam
  • [PATCH v4 07/36] ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors   Steve Longerbeam
    • [PATCH v4 07/36] ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors   Fabio Estevam
      • [PATCH v4 07/36] ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors   Steve Longerbeam
  • [PATCH v4 08/36] ARM: dts: imx6-sabreauto: create i2cmux for i2c3   Steve Longerbeam
  • [PATCH v4 09/36] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b   Steve Longerbeam
  • [PATCH v4 10/36] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture   Steve Longerbeam
  • [PATCH v4 11/36] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder   Steve Longerbeam
  • [PATCH v4 12/36] add mux and video interface bridge entity functions   Steve Longerbeam
    • [PATCH v4 12/36] add mux and video interface bridge entity functions   Pavel Machek
      • [PATCH v4 12/36] add mux and video interface bridge entity functions   Steve Longerbeam
  • [PATCH v4 13/36] [media] v4l2: add a frame timeout event   Steve Longerbeam
  • [PATCH v4 14/36] [media] v4l2-mc: add a function to inherit controls from a pipeline   Steve Longerbeam
    • [PATCH v4 14/36] [media] v4l2-mc: add a function to inherit controls from a pipeline   Pavel Machek
  • [PATCH v4 15/36] platform: add video-multiplexer subdevice driver   Steve Longerbeam
    • [PATCH v4 15/36] platform: add video-multiplexer subdevice driver   Pavel Machek
      • [PATCH v4 15/36] platform: add video-multiplexer subdevice driver   Philipp Zabel
      • [PATCH v4 15/36] platform: add video-multiplexer subdevice driver   Pavel Machek
    • [PATCH v4 15/36] platform: add video-multiplexer subdevice driver   Rob Herring
      • [PATCH v4 15/36] platform: add video-multiplexer subdevice driver   Steve Longerbeam
  • [PATCH v4 16/36] UAPI: Add media UAPI Kbuild file   Steve Longerbeam
  • [PATCH v4 17/36] media: Add userspace header file for i.MX   Steve Longerbeam
    • [PATCH v4 17/36] media: Add userspace header file for i.MX   Philipp Zabel
      • [PATCH v4 17/36] media: Add userspace header file for i.MX   Steve Longerbeam
  • [PATCH v4 18/36] media: Add i.MX media core driver   Steve Longerbeam
    • [PATCH v4 18/36] media: Add i.MX media core driver   Russell King - ARM Linux
      • [PATCH v4 18/36] media: Add i.MX media core driver   Steve Longerbeam
    • [PATCH v4 18/36] media: Add i.MX media core driver   Philipp Zabel
      • [PATCH v4 18/36] media: Add i.MX media core driver   Russell King - ARM Linux
      • [PATCH v4 18/36] media: Add i.MX media core driver   Steve Longerbeam
      • [PATCH v4 18/36] media: Add i.MX media core driver   Philipp Zabel
  • [PATCH v4 19/36] media: imx: Add Capture Device Interface   Steve Longerbeam
  • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Steve Longerbeam
    • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Russell King - ARM Linux
      • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Russell King - ARM Linux
      • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Russell King - ARM Linux
      • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Russell King - ARM Linux
      • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Steve Longerbeam
      • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Steve Longerbeam
      • [PATCH v4 20/36] media: imx: Add CSI subdev driver   Russell King - ARM Linux
  • [PATCH v4 21/36] media: imx: Add VDIC subdev driver   Steve Longerbeam
  • [PATCH v4 22/36] media: imx: Add IC subdev drivers   Steve Longerbeam
  • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
    • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Russell King - ARM Linux
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
    • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Russell King - ARM Linux
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Philipp Zabel
      • [PATCH v4 23/36] media: imx: Add MIPI CSI-2 Receiver subdev driver   Steve Longerbeam
  • [PATCH v4 24/36] [media] add Omnivision OV5640 sensor driver   Steve Longerbeam
    • [PATCH v4 24/36] [media] add Omnivision OV5640 sensor driver   Rob Herring
      • [PATCH v4 24/36] [media] add Omnivision OV5640 sensor driver   Steve Longerbeam
  • [PATCH v4 25/36] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers   Steve Longerbeam
  • [PATCH v4 26/36] media: imx: add support for bayer formats   Steve Longerbeam
  • [PATCH v4 27/36] media: imx: csi: add support for bayer formats   Steve Longerbeam
  • [PATCH v4 28/36] media: imx: csi: fix crop rectangle changes in set_fmt   Steve Longerbeam
    • [PATCH v4 28/36] media: imx: csi: fix crop rectangle changes in set_fmt   Russell King - ARM Linux
      • [PATCH v4 28/36] media: imx: csi: fix crop rectangle changes in set_fmt   Steve Longerbeam
  • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
    • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
    • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Russell King - ARM Linux
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Russell King - ARM Linux
    • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Sakari Ailus
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Sakari Ailus
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Russell King - ARM Linux
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Steve Longerbeam
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Philipp Zabel
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Sakari Ailus
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Russell King - ARM Linux
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Sakari Ailus
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Russell King - ARM Linux
      • [PATCH v4 29/36] media: imx: mipi-csi2: enable setting and getting of frame rates   Sakari Ailus
  • [PATCH v4 30/36] media: imx: update capture dev format on IDMAC output pad set_fmt   Steve Longerbeam
    • [PATCH v4 30/36] media: imx: update capture dev format on IDMAC output pad set_fmt   Philipp Zabel
  • [PATCH v4 31/36] media: imx: csi: add __csi_get_fmt   Steve Longerbeam
  • [PATCH v4 32/36] media: imx: csi/fim: add support for frame intervals   Steve Longerbeam
    • [PATCH v4 32/36] media: imx: csi/fim: add support for frame intervals   Steve Longerbeam
  • [PATCH v4 33/36] media: imx: redo pixel format enumeration and negotiation   Steve Longerbeam
    • [PATCH v4 33/36] media: imx: redo pixel format enumeration and negotiation   Philipp Zabel
      • [PATCH v4 33/36] media: imx: redo pixel format enumeration and negotiation   Steve Longerbeam
      • [PATCH v4 33/36] media: imx: redo pixel format enumeration and negotiation   Philipp Zabel
      • [PATCH v4 33/36] media: imx: redo pixel format enumeration and negotiation   Steve Longerbeam
  • [PATCH v4 34/36] media: imx: csi: add frame skipping support   Steve Longerbeam
  • [PATCH v4 35/36] media: imx: csi: fix crop rectangle reset in sink set_fmt   Steve Longerbeam
  • [PATCH v4 36/36] media: imx: propagate sink pad formats to source pads   Steve Longerbeam
    • [PATCH v4 36/36] media: imx: propagate sink pad formats to source pads   Philipp Zabel
      • [PATCH v4 36/36] media: imx: propagate sink pad formats to source pads   Steve Longerbeam
  • [PATCH v4 00/36] i.MX Media Driver   Russell King - ARM Linux
    • [PATCH v4 00/36] i.MX Media Driver   Steve Longerbeam
  • [PATCH v4 00/36] i.MX Media Driver   Russell King - ARM Linux
    • [PATCH v4 00/36] i.MX Media Driver   Steve Longerbeam
      • [PATCH v4 00/36] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v4 00/36] i.MX Media Driver   Philipp Zabel
      • [PATCH v4 00/36] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v4 00/36] i.MX Media Driver   Philipp Zabel
      • [PATCH v4 00/36] i.MX Media Driver   Steve Longerbeam
      • [PATCH v4 00/36] i.MX Media Driver   Philipp Zabel
      • [PATCH v4 00/36] i.MX Media Driver   Sakari Ailus
      • [PATCH v4 00/36] i.MX Media Driver   Russell King - ARM Linux
      • [PATCH v4 00/36] i.MX Media Driver   Philipp Zabel
      • [PATCH v4 00/36] i.MX Media Driver   Sakari Ailus
• [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver   Steve Longerbeam
  • [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver   Philipp Zabel
    • [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver   Steve Longerbeam
  • [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver   Rob Herring
    • [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver   Steve Longerbeam
• [PATCH v3 22/24] drm/rockchip: dw-mipi-dsi: support non-burst modes   Chris Zhong
  • [PATCH v3 22/24] drm/rockchip: dw-mipi-dsi: support non-burst modes   John Keeping
• [alsa-devel] [PATCH 0/2] ASoC: mediatek: add power-domain ctrl for 2701   Garlic Tseng
• [alsa-devel] [PATCH 1/2] ASoC: mediatek: add power-domain get/put ctrl for mt2701   Garlic Tseng
  • [alsa-devel] [PATCH 1/2] ASoC: mediatek: add power-domain get/put ctrl for mt2701   Mark Brown
  • Applied "ASoC: mediatek: add power-domain get/put ctrl for mt2701" to the asoc tree   Mark Brown
• [alsa-devel] [PATCH 2/2] ASoC: mediatek: add power-domains for mt2701-afe-pcm.txt   Garlic Tseng
  • Applied "ASoC: mediatek: add power-domains for mt2701-afe-pcm.txt" to the asoc tree   Mark Brown
• [PATCH v7 1/3] dt: bindings: add documentation for zx2967 family i2c controller   Baoyou Xie
  • [PATCH v7 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v7 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Baoyou Xie
    • [PATCH v7 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Jun Nie
    • [PATCH v7 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family   Wolfram Sang
• [PATCH v5 0/4] Broadcom SBA RAID support   Anup Patel
  • [PATCH v5 1/4] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position   Anup Patel
  • [PATCH v5 2/4] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()   Anup Patel
  • [PATCH v5 3/4] dmaengine: Add Broadcom SBA RAID driver   Anup Patel
  • [PATCH v5 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver   Anup Patel
    • [PATCH v5 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver   Rob Herring
• [PATCH v4] ARM: wire up HWCAP/HWCAP2 feature bits to the CPU modalias   Ard Biesheuvel
  • [PATCH v4] ARM: wire up HWCAP/HWCAP2 feature bits to the CPU modalias   Ard Biesheuvel
• [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc for imx6sll   Dong Aisheng
  • [PATCH v2 05/12] Document: dt: binding: imx: update pinctrl doc for imx6sll   Dong Aisheng
• [PATCH 30/37] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode   Kishon Vijay Abraham I
• [PATCH v3 4/6] ARM: dts: mvebu: Add binding for mv98dx3236-soc-id   Chris Packham
  • [PATCH v3 4/6] ARM: dts: mvebu: Add binding for mv98dx3236-soc-id   Rob Herring
• [PATCH 37/37] ARM: dts: DRA7: Add pcie1 dt node for EP mode   Kishon Vijay Abraham I
• [PATCH] ARM: at91: move SoC detection to its own driver   Alexandre Belloni
  • [PATCH] ARM: at91: move SoC detection to its own driver   Nicolas Ferre
• [PATCH] KVM: arm64: VGIC: fix command handling while ITS being disabled   Andre Przywara
  • [PATCH] KVM: arm64: VGIC: fix command handling while ITS being disabled   Auger Eric
• [PATCH v2 1/3] ASoC: zx-tdm: add bindings doc for zte's tdm controller   Baoyou Xie
  • [PATCH v2 2/3] MAINTAINERS: add zte tdm controller driver to ARM ZTE architecture   Baoyou Xie
  • [PATCH v2 3/3] ASoC: zx-tdm: add zte's tdm controller driver   Baoyou Xie
    • [PATCH v2 3/3] ASoC: zx-tdm: add zte's tdm controller driver   Shawn Guo
    • Applied "ASoC: zx-tdm: add zte's tdm controller driver" to the asoc tree   Mark Brown
  • [PATCH v2 1/3] ASoC: zx-tdm: add bindings doc for zte's tdm controller   Shawn Guo
  • Applied "ASoC: zx-tdm: add bindings doc for zte's tdm controller" to the asoc tree   Mark Brown
• [PATCH 0/4] add uart DMA function   Long Cheng
  • [PATCH 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support   Long Cheng
    • [PATCH 2/4] dmaengine: mtk_uart_dma: add Mediatek uart DMA support   kbuild test robot
• [PATCH 1/4] dt-bindings: dma: uart: add uart dma bindings   Long Cheng
  • [PATCH 1/4] dt-bindings: dma: uart: add uart dma bindings   Rob Herring
• [PATCH 3/4] serial: 8250-mtk: add uart DMA support   Long Cheng
  • [PATCH 3/4] serial: 8250-mtk: add uart DMA support   Arnd Bergmann
• [PATCH 4/4] arm: dts: mt2701: add uart APDMA to device tree   Long Cheng
• [PATCH 00/21] net-next: stmmac: add dwmac-sun8i ethernet driver   Corentin Labbe
  • [PATCH 01/21] net-next: stmmac add optional init_phy function   Corentin Labbe
  • [PATCH 02/21] net-next: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr   Corentin Labbe
  • [PATCH 04/21] ARM: sun8i: dt: Add DT bindings documentation for Allwinner dwmac-sun8i   Corentin Labbe
    • [PATCH 04/21] ARM: sun8i: dt: Add DT bindings documentation for Allwinner dwmac-sun8i   Maxime Ripard
      • [PATCH 04/21] ARM: sun8i: dt: Add DT bindings documentation for Allwinner dwmac-sun8i   Corentin Labbe
    • [PATCH 04/21] ARM: sun8i: dt: Add DT bindings documentation for Allwinner dwmac-sun8i   Florian Fainelli
      • [PATCH 04/21] ARM: sun8i: dt: Add DT bindings documentation for Allwinner dwmac-sun8i   Corentin Labbe
  • [PATCH 05/21] net-next: stmmac: Add dwmac-sun8i   Corentin Labbe
    • [PATCH 05/21] net-next: stmmac: Add dwmac-sun8i   Maxime Ripard
      • [PATCH 05/21] net-next: stmmac: Add dwmac-sun8i   Corentin Labbe
      • [PATCH 05/21] net-next: stmmac: Add dwmac-sun8i   Maxime Ripard
  • [PATCH 06/21] ARM: dts: sun8i-h3: Add dt node for the syscon control module   Corentin Labbe
  • [PATCH 07/21] ARM: dts: sun8i-h3: add dwmac-sun8i ethernet driver   Corentin Labbe
  • [PATCH 08/21] ARM: dts: sun8i-h3: add dwmac-sun8i rgmii pins   Corentin Labbe
    • [PATCH 08/21] ARM: dts: sun8i-h3: add dwmac-sun8i rgmii pins   Maxime Ripard
      • [PATCH 08/21] ARM: dts: sun8i-h3: add dwmac-sun8i rgmii pins   Corentin Labbe
  • [PATCH 09/21] ARM: dts: sun8i: Enable dwmac-sun8i on the Banana Pi M2+   Corentin Labbe
  • [PATCH 10/21] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange PI PC   Corentin Labbe
  • [PATCH 11/21] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange Pi 2   Corentin Labbe
  • [PATCH 12/21] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange PI One   Corentin Labbe
  • [PATCH 13/21] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange Pi plus   Corentin Labbe
  • [PATCH 14/21] ARM: dts: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high   Corentin Labbe
  • [PATCH 15/21] ARM64: dts: sun50i-a64: Add dt node for the syscon control module   Corentin Labbe
  • [PATCH 16/21] ARM64: dts: sun50i-a64: add dwmac-sun8i Ethernet driver   Corentin Labbe
  • [PATCH 17/21] ARM: dts: sun50i-a64: enable dwmac-sun8i on pine64   Corentin Labbe
  • [PATCH 18/21] ARM: dts: sun50i-a64: enable dwmac-sun8i on pine64 plus   Corentin Labbe
  • [PATCH 19/21] ARM: dts: sun50i-a64: enable dwmac-sun8i on the BananaPi M64   Corentin Labbe
  • [PATCH 20/21] ARM: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig   Corentin Labbe
    • [PATCH 20/21] ARM: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig   Maxime Ripard
      • [PATCH 20/21] ARM: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig   Corentin Labbe
  • [PATCH 21/21] ARM: sunxi: Enable dwmac-sun8i driver on multi_v7_defconfig   Corentin Labbe
• [PATCH 03/21] net-next: stmmac: add optional setup function   Corentin Labbe
  • [linux-sunxi] [PATCH 03/21] net-next: stmmac: add optional setup function   Peter Korsgaard
    • [linux-sunxi] [PATCH 03/21] net-next: stmmac: add optional setup function   Corentin Labbe
• [PATCH 0/4] PCI: dwc: cleanup designware driver   Kishon Vijay Abraham I
  • [PATCH 1/4] PCI: dwc: designware: Add new *ops* for cpu addr fixup   Kishon Vijay Abraham I
  • [PATCH 2/4] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops   Kishon Vijay Abraham I
    • [PATCH 2/4] PCI: dwc: dra7xx: Populate cpu_addr_fixup ops   Niklas Cassel
  • [PATCH 3/4] PCI: dwc: all: Modify dbi accessors to take dbi_base as argument   Kishon Vijay Abraham I
  • [PATCH 4/4] PCI: dwc: all: Modify dbi accessors to access data of 4/2/1 bytes   Kishon Vijay Abraham I
• [RFC PATCH v1] iommu/io-pgtable-arm-v7s: Check for leaf entry right after finding it   Oleksandr Tyshchenko
  • [RFC PATCH v1] iommu/io-pgtable-arm-v7s: Check for leaf entry right after finding it   Oleksandr Tyshchenko
  • [RFC PATCH v1] iommu/io-pgtable-arm-v7s: Check for leaf entry right after finding it   Robin Murphy
    • [RFC PATCH v1] iommu/io-pgtable-arm-v7s: Check for leaf entry right after finding it   Oleksandr Tyshchenko
      • [RFC PATCH v1] iommu/io-pgtable-arm-v7s: Check for leaf entry right after finding it   Will Deacon
• [PATCH] Staging: bcm2835-audio: fixed a code style issue:   Bo YU
• [PATCH V2] perf: qcom: Add L3 cache PMU driver   Agustin Vega-Frias
  • [PATCH V2] perf: qcom: Add L3 cache PMU driver   Mark Rutland
    • [PATCH V2] perf: qcom: Add L3 cache PMU driver   Agustin Vega-Frias
      • [PATCH V2] perf: qcom: Add L3 cache PMU driver   Mark Rutland
  • [PATCH V2] perf: qcom: Add L3 cache PMU driver   Timur Tabi
• [PATCH 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
  • [PATCH 1/3] rtc: armada38x: Prepare driver to manage different versions   Gregory CLEMENT
  • [PATCH 2/3] rtc: armada38x: Add support for Armada 7K/8K   Gregory CLEMENT
  • [PATCH 3/3] arm64: dts: marvell: add RTC description for Armada 7K/8K   Gregory CLEMENT
  • [PATCH 0/3] Extend rtc-armada38x support for Armada 7K/8K   Russell King - ARM Linux
    • [PATCH 0/3] Extend rtc-armada38x support for Armada 7K/8K   Russell King - ARM Linux
      • [PATCH 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
• [PATCH v3 0/3] ARM: l2c: add l2c support for RZ/A1   Chris Brandt
  • [PATCH v3 1/3] ARM: l2c: allow CA9 optimizations to be disabled   Chris Brandt
    • [PATCH v3 1/3] ARM: l2c: allow CA9 optimizations to be disabled   Russell King - ARM Linux
  • [PATCH v3 2/3] ARM: shmobile: r7s72100: Enable L2 cache   Chris Brandt
  • [PATCH v3 3/3] ARM: dts: r7s72100: add l2 cache   Chris Brandt
• [PATCH 1/2] arm64: dma_mapping: allow PCI host driver to limit DMA mask   Arnd Bergmann
• [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1   Chris Brandt
  • [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1   Russell King - ARM Linux
    • [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1   Arnd Bergmann
      • [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1   Russell King - ARM Linux
      • [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1   Chris Brandt
• [PATCH v4 1/3] ARM: l2c: allow CA9 optimizations to be disabled   Chris Brandt
• [PATCH v4 2/3] ARM: shmobile: r7s72100: Enable L2 cache   Chris Brandt
• [PATCH v4 3/3] ARM: dts: r7s72100: add l2 cache   Chris Brandt
• [PATCH] ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x   Gregory CLEMENT
• [PATCH] ARM: at91/dt: Disable SPI on at91sam9x5ek to allow MCI1 to work.   cristian.birsan at microchip.com
  • [PATCH] ARM: at91/dt: Disable SPI on at91sam9x5ek to allow MCI1 to work.   Nicolas Ferre
• [PATCH v2] i2c: at91: ensure state is restored after suspending   Alexandre Belloni
  • [PATCH v2] i2c: at91: ensure state is restored after suspending   Ludovic Desroches
  • [PATCH v2] i2c: at91: ensure state is restored after suspending   Wolfram Sang
• [GIT PULL] ARM: mvebu: late dt for v4.11   Gregory CLEMENT
  • [GIT PULL] ARM: mvebu: late dt for v4.11   Arnd Bergmann
• [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif   Bartosz Golaszewski
  • [PATCH 1/2] ARM: davinci_all_defconfig: enable VPIF display modules   Bartosz Golaszewski
  • [PATCH 2/2] ARM: davinci_all_defconfig: enable IRQ support for pca953x   Bartosz Golaszewski
  • [PATCH 0/2] ARM: davinci_all_defconfig: enable modules required by vpif   Sekhar Nori
• [PATCH 0/2] media: dt-bindings: extend the vpif bindings   Bartosz Golaszewski
  • [PATCH 1/2] media: dt-bindings: vpif: fix whitespace errors   Bartosz Golaszewski
  • [PATCH 2/2] media: dt-bindings: vpif: extend the example with an output port   Bartosz Golaszewski
    • [PATCH 2/2] media: dt-bindings: vpif: extend the example with an output port   Rob Herring
      • [PATCH 2/2] media: dt-bindings: vpif: extend the example with an output port   Bartosz Golaszewski
• [PATCH] media: vpif: use a configurable i2c_adapter_id for vpif display   Bartosz Golaszewski
• [PATCH 0/4] ARM: dts: da850-evm: vpif DT changes   Bartosz Golaszewski
  • [PATCH 2/4] ARM: dts: da850: add vpif video display pins   Bartosz Golaszewski
    • [PATCH 2/4] ARM: dts: da850: add vpif video display pins   Sekhar Nori
      • [PATCH 2/4] ARM: dts: da850: add vpif video display pins   Bartosz Golaszewski
      • [PATCH 2/4] ARM: dts: da850: add vpif video display pins   Sekhar Nori
      • [PATCH 2/4] ARM: dts: da850: add vpif video display pins   Bartosz Golaszewski
      • [PATCH 2/4] ARM: dts: da850: add vpif video display pins   Sekhar Nori
  • [PATCH 3/4] ARM: dts: da850-evm: add the output port to the vpif node   Bartosz Golaszewski
  • [PATCH 4/4] ARM: dts: da850-evm: add the UI expander node   Bartosz Golaszewski
    • [PATCH 4/4] ARM: dts: da850-evm: add the UI expander node   Sekhar Nori
      • [PATCH 4/4] ARM: dts: da850-evm: add the UI expander node   Bartosz Golaszewski
      • [PATCH 4/4] ARM: dts: da850-evm: add the UI expander node   Sekhar Nori
      • [PATCH 4/4] ARM: dts: da850-evm: add the UI expander node   Bartosz Golaszewski
• [PATCH 1/4] ARM: dts: da850-evm: fix whitespace errors   Bartosz Golaszewski
• [PATCH 0/4] ARM: davinci: vpif capture & display support   Bartosz Golaszewski
  • [PATCH 1/4] ARM: davinci: board-da850-evm: add I2C ID for VPIF   Bartosz Golaszewski
  • [PATCH 2/4] ARM: davinci: da8xx: add pdata-quirks for VPIF capture   Bartosz Golaszewski
    • [PATCH 2/4] ARM: davinci: da8xx: add pdata-quirks for VPIF capture   Sekhar Nori
  • [PATCH 3/4] ARM: da850-evm: add a fixed regulator for the UI board IO expander   Bartosz Golaszewski
    • [PATCH 3/4] ARM: da850-evm: add a fixed regulator for the UI board IO expander   Sekhar Nori
  • [PATCH 4/4] ARM: davinci: add pdata-quirks for da850-evm vpif display   Bartosz Golaszewski
    • [PATCH 4/4] ARM: davinci: add pdata-quirks for da850-evm vpif display   Sekhar Nori
      • [PATCH 4/4] ARM: davinci: add pdata-quirks for da850-evm vpif display   Bartosz Golaszewski
    • [PATCH 4/4] ARM: davinci: add pdata-quirks for da850-evm vpif display   kbuild test robot
• [PATCH v4 0/3] arm64: usercopy: Implement stack frame object validation   James Morse
  • [PATCH v4 1/3] usercopy: create enum stack_type   James Morse
  • [PATCH v4 2/3] arm64: Add arch_within_stack_frames() for hardened usercopy   James Morse
    • [PATCH v4 2/3] arm64: Add arch_within_stack_frames() for hardened usercopy   Kees Cook
  • [PATCH v4 3/3] arm64/uaccess: Add hardened usercopy check for bad stack accesses   James Morse
    • [PATCH v4 3/3] arm64/uaccess: Add hardened usercopy check for bad stack accesses   Kees Cook
    • [kernel-hardening] [PATCH v4 3/3] arm64/uaccess: Add hardened usercopy check for bad stack accesses   Keun-O Park
  • [PATCH v4 0/3] arm64: usercopy: Implement stack frame object validation   Kees Cook
• [PATCH v2 1/3] watchdog: sama5d4: Cleanup init   Alexandre Belloni
  • [PATCH v2 1/3] watchdog: sama5d4: Cleanup init   Guenter Roeck
    • [PATCH v2 1/3] watchdog: sama5d4: Cleanup init   Alexandre Belloni
      • [PATCH v2 1/3] watchdog: sama5d4: Cleanup init   Guenter Roeck
• [PATCH v2 2/3] watchdog: sama5d4: Fix setting timeout when watchdog is disabled   Alexandre Belloni
  • [PATCH v2 2/3] watchdog: sama5d4: Fix setting timeout when watchdog is disabled   Guenter Roeck
    • [PATCH v2 2/3] watchdog: sama5d4: Fix setting timeout when watchdog is disabled   Alexandre Belloni
      • [PATCH v2 2/3] watchdog: sama5d4: Fix setting timeout when watchdog is disabled   Guenter Roeck
      • [PATCH v2 2/3] watchdog: sama5d4: Fix setting timeout when watchdog is disabled   Alexandre Belloni
      • [PATCH v2 2/3] watchdog: sama5d4: Fix setting timeout when watchdog is disabled   Guenter Roeck
• [PATCH v2 3/3] watchdog: sama5d4: Implement resume hook   Alexandre Belloni
  • [PATCH v2 3/3] watchdog: sama5d4: Implement resume hook   Guenter Roeck
    • [PATCH v2 3/3] watchdog: sama5d4: Implement resume hook   Alexandre Belloni
      • [PATCH v2 3/3] watchdog: sama5d4: Implement resume hook   Guenter Roeck
• [PATCH v4 0/3] Add support for Broadcom iProc mailbox controller   Jonathan Richardson
• [RESEND PATCH 0/3] pwm: lpc32xx: switch driver to one phandle argument for PWM consumers   slemieux.tyco at gmail.com
  • [RESEND PATCH 2/3] pwm: lpc32xx: switch driver to one phandle argument for PWM consumers   slemieux.tyco at gmail.com
  • [RESEND PATCH 3/3] pwm: lpc32xx: remove handling of PWM channels   slemieux.tyco at gmail.com
• [RESEND PATCH 1/3] dt: pwm: lpc32xx: add description of clocks and #pwm-cells properties   slemieux.tyco at gmail.com
• [PATCH] ARM: imx25: set default phy_type and dr_mode for usbotg port   Uwe Kleine-König
  • [PATCH] ARM: imx25: set default phy_type and dr_mode for usbotg port   Fabio Estevam
• [PATCH V2] PCI: add QCOM root port quirks for ACS   Sinan Kaya
  • [PATCH V2] PCI: add QCOM root port quirks for ACS   Alex Williamson
  • [PATCH V2] PCI: add QCOM root port quirks for ACS   Bjorn Helgaas
• [PATCH] staging: bcm2835-audio: bcm2835.h: fix various coding style issues   Nathan Howard
  • [PATCH] staging: bcm2835-audio: bcm2835.h: fix various coding style issues   Greg Kroah-Hartman
  • [PATCH] staging: bcm2835-audio: bcm2835.h: fix various coding style issues   Nathan Howard
    • [PATCH] staging: bcm2835-audio: bcm2835.h: fix various coding style issues   Greg Kroah-Hartman
    • [PATCH] staging: bcm2835-audio: bcm2835.h: fix various coding style issues   Joe Perches
• [PATCH v2] arm64: print a fault message when attempting to write RO memory   Stephen Boyd
  • [PATCH v2] arm64: print a fault message when attempting to write RO memory   James Morse
    • [PATCH v2] arm64: print a fault message when attempting to write RO memory   Stephen Boyd
      • [PATCH v2] arm64: print a fault message when attempting to write RO memory   James Morse
      • [PATCH v2] arm64: print a fault message when attempting to write RO memory   Stephen Boyd
• [PATCH 0/7] drm/sun4i: Various fixes and cleanups part 1   Chen-Yu Tsai
  • [PATCH 3/7] drm/sun4i: Check return value of drm_vblank_init   Chen-Yu Tsai
    • [PATCH 3/7] drm/sun4i: Check return value of drm_vblank_init   Maxime Ripard
  • [PATCH 5/7] drm/sun4i: Drop useless assignment in sun4i_layers_init   Chen-Yu Tsai
    • [PATCH 5/7] drm/sun4i: Drop useless assignment in sun4i_layers_init   Maxime Ripard
  • [PATCH 6/7] drm/sun4i: Save newly created layer in layers array in sun4i_layers_init   Chen-Yu Tsai
    • [PATCH 6/7] drm/sun4i: Save newly created layer in layers array in sun4i_layers_init   Maxime Ripard
  • [PATCH 7/7] drm/sun4i: Make sun4i_crtc_init return ERR_PTR style error codes   Chen-Yu Tsai
    • [PATCH 7/7] drm/sun4i: Make sun4i_crtc_init return ERR_PTR style error codes   Maxime Ripard
• [PATCH 1/7] drm/sun4i: Move drm_mode_config_cleanup call to main driver   Chen-Yu Tsai
  • [PATCH 1/7] drm/sun4i: Move drm_mode_config_cleanup call to main driver   Maxime Ripard
• [PATCH 2/7] drm/sun4i: Fix up error path cleanup for master bind function   Chen-Yu Tsai
  • [PATCH 2/7] drm/sun4i: Fix up error path cleanup for master bind function   Maxime Ripard
• [PATCH 4/7] drm/sun4i: Fix kcalloc element size in sun4i_layers_init   Chen-Yu Tsai
  • [PATCH 4/7] drm/sun4i: Fix kcalloc element size in sun4i_layers_init   Maxime Ripard
• [PATCH v3 0/4] leds: add leds-mt6323 support on MT7623 SoC   sean.wang at mediatek.com
  • [PATCH v3 3/4] leds: Add LED support for MT6323 PMIC   sean.wang at mediatek.com
    • [PATCH v3 3/4] leds: Add LED support for MT6323 PMIC   Jacek Anaszewski
  • [PATCH v3 4/4] mfd: mt6397: Add MT6323 LED support into MT6397 driver   sean.wang at mediatek.com
• [PATCH v3 1/4] Documentation: devicetree: Add document bindings for leds-mt6323   sean.wang at mediatek.com
  • [PATCH v3 1/4] Documentation: devicetree: Add document bindings for leds-mt6323   Jacek Anaszewski
• [PATCH v3 2/4] Documentation: devicetree: Add LED subnode binding for MT6323 PMIC   sean.wang at mediatek.com
• [PATCH v4 2/3] mailbox: Add iProc mailbox controller driver   Jassi Brar
  • [PATCH v4 2/3] mailbox: Add iProc mailbox controller driver   Jonathan Richardson
  • [PATCH v4 2/3] mailbox: Add iProc mailbox controller driver   Jonathan Richardson
    • [PATCH v4 2/3] mailbox: Add iProc mailbox controller driver   Jassi Brar
• [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Joe Perches
  • [PATCH 02/35] ARM: ep93xx: Convert remaining uses of pr_warning to pr_warn   Joe Perches
    • [PATCH 02/35] ARM: ep93xx: Convert remaining uses of pr_warning to pr_warn   Hartley Sweeten
  • [PATCH 23/35] drivers/mfd: Convert remaining uses of pr_warning to pr_warn   Joe Perches
  • [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Rafael J. Wysocki
    • [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Geert Uytterhoeven
  • [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Rob Herring
    • [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Joe Perches
      • [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Emil Velikov
      • [PATCH 00/35] treewide trivial patches converting pr_warning to pr_warn   Joe Perches
• [PATCH 03/35] arm64: Convert remaining uses of pr_warning to pr_warn   Joe Perches
  • [PATCH 03/35] arm64: Convert remaining uses of pr_warning to pr_warn   Mark Rutland
• [PATCH] arm64: dts: qcom: pm8994: Add rtc node   Bjorn Andersson
• [PATCH] Staging: BCM2835-Audio: bcm2835-pcm: single line block statement braces fix   Daniel Perez de Andres
• [PATCH] pata: remove the at91 driver   Boris Brezillon
  • [PATCH] pata: remove the at91 driver   Bartlomiej Zolnierkiewicz
    • [PATCH] pata: remove the at91 driver   Boris Brezillon
      • [PATCH] pata: remove the at91 driver   Nicolas Ferre
• [PATCH v2 00/22] PCI: Support for configurable PCI endpoint   Kishon Vijay Abraham I
  • [PATCH v2 01/22] PCI: endpoint: Add EP core layer to enable EP controller and EP functions   Kishon Vijay Abraham I
    • [PATCH v2 01/22] PCI: endpoint: Add EP core layer to enable EP controller and EP functions   Joao Pinto
      • [PATCH v2 01/22] PCI: endpoint: Add EP core layer to enable EP controller and EP functions   Kishon Vijay Abraham I
      • [PATCH v2 01/22] PCI: endpoint: Add EP core layer to enable EP controller and EP functions   Joao Pinto
  • [PATCH v2 02/22] Documentation: PCI: Guide to use PCI Endpoint Core Layer   Kishon Vijay Abraham I
    • [PATCH v2 02/22] Documentation: PCI: Guide to use PCI Endpoint Core Layer   Joao Pinto
  • [PATCH v2 03/22] PCI: endpoint: Introduce configfs entry for configuring EP functions   Kishon Vijay Abraham I
    • [PATCH v2 03/22] PCI: endpoint: Introduce configfs entry for configuring EP functions   Kishon Vijay Abraham I
    • [PATCH v2 03/22] PCI: endpoint: Introduce configfs entry for configuring EP functions   Christoph Hellwig
  • [PATCH v2 04/22] Documentation: PCI: Guide to use pci endpoint configfs   Kishon Vijay Abraham I
    • [PATCH v2 04/22] Documentation: PCI: Guide to use pci endpoint configfs   Joao Pinto
    • [PATCH v2 04/22] Documentation: PCI: Guide to use pci endpoint configfs   Christoph Hellwig
  • [PATCH v2 05/22] Documentation: PCI: Add specification for the *pci test* function device   Kishon Vijay Abraham I
  • [PATCH v2 06/22] PCI: endpoint: functions: Add an EP function to test PCI   Kishon Vijay Abraham I
  • [PATCH v2 07/22] Documentation: PCI: Add binding documentation for pci-test endpoint function   Kishon Vijay Abraham I
  • [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support   Kishon Vijay Abraham I
    • [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support   Kishon Vijay Abraham I
    • [PATCH v2 08/22] PCI: dwc: designware: Add EP mode support   Joao Pinto
  • [PATCH v2 09/22] dt-bindings: PCI: Add dt bindings for pci designware EP mode   Kishon Vijay Abraham I
  • [PATCH v2 10/22] PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled independently   Kishon Vijay Abraham I
  • [PATCH v2 11/22] PCI: dwc: dra7xx: Add EP mode support   Kishon Vijay Abraham I
  • [PATCH v2 12/22] dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode   Kishon Vijay Abraham I
  • [PATCH v2 13/22] PCI: dwc: dra7xx: Workaround for errata id i870   Kishon Vijay Abraham I
  • [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode   Kishon Vijay Abraham I
    • [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode   Rob Herring
      • [PATCH v2 14/22] dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode   Kishon Vijay Abraham I
  • [PATCH v2 15/22] PCI: Add device IDs for DRA74x and DRA72x   Kishon Vijay Abraham I
  • [PATCH v2 16/22] misc: Add host side pci driver for pci test function device   Kishon Vijay Abraham I
  • [PATCH v2 17/22] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver   Kishon Vijay Abraham I
  • [PATCH v2 18/22] tools: PCI: Add a userspace tool to test PCI endpoint   Kishon Vijay Abraham I
  • [PATCH v2 19/22] tools: PCI: Add sample test script to invoke pcitest   Kishon Vijay Abraham I
  • [PATCH v2 20/22] Documentation: PCI: Add userguide for PCI endpoint test function   Kishon Vijay Abraham I
  • [PATCH v2 21/22] MAINTAINERS: add PCI EP maintainer   Kishon Vijay Abraham I
  • [PATCH v2 22/22] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP   Kishon Vijay Abraham I
• [PATCH net-next 0/2] net: mvneta: improve rx performance   Jisheng Zhang
  • [PATCH net-next 1/2] net: mvneta: avoid getting status from rx_desc as much as possible   Jisheng Zhang
  • [PATCH net-next 2/2] net: mvneta: Use cacheable memory to store the rx buffer DMA address   Jisheng Zhang
• [PATCH net-next v2 0/2] net: mvneta: improve rx performance   Jisheng Zhang
  • [PATCH net-next v2 2/2] net: mvneta: Use cacheable memory to store the rx buffer DMA address   Jisheng Zhang
    • [PATCH net-next v2 2/2] net: mvneta: Use cacheable memory to store the rx buffer DMA address   Gregory CLEMENT
      • [PATCH net-next v2 2/2] net: mvneta: Use cacheable memory to store the rx buffer DMA address   Thomas Petazzoni
      • [PATCH net-next v2 2/2] net: mvneta: Use cacheable memory to store the rx buffer DMA address   Gregory CLEMENT
  • [PATCH net-next v2 0/2] net: mvneta: improve rx performance   Jisheng Zhang
  • [PATCH net-next v2 0/2] net: mvneta: improve rx performance   Gregory CLEMENT
    • [PATCH net-next v2 0/2] net: mvneta: improve rx performance   Jisheng Zhang
• [PATCH net-next v2 1/2] net: mvneta: avoid getting status from rx_desc as much as possible   Jisheng Zhang
  • [PATCH net-next v2 1/2] net: mvneta: avoid getting status from rx_desc as much as possible   Gregory CLEMENT
• [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
  • [PATCH v2 1/3] rtc: armada38x: Prepare driver to manage different versions   Gregory CLEMENT
  • [PATCH v2 2/3] rtc: armada38x: Add support for Armada 7K/8K   Gregory CLEMENT
  • [PATCH v2 3/3] arm64: dts: marvell: add RTC description for Armada 7K/8K   Gregory CLEMENT
  • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
    • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Russell King - ARM Linux
      • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
      • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Russell King - ARM Linux
    • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Alexandre Belloni
      • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
      • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Russell King - ARM Linux
      • [PATCH v2 0/3] Extend rtc-armada38x support for Armada 7K/8K   Alexandre Belloni
• [PATCH v2 0/6] Enable DMA for daVinci SPI controller   Frode Isaksen
  • [PATCH v2 1/6] spi: davinci: Use SPI framework to handle DMA mapping   Frode Isaksen
    • [PATCH v2 1/6] spi: davinci: Use SPI framework to handle DMA mapping   Mark Brown
  • [PATCH v2 2/6] spi: davinci: enable DMA when channels are defined in DT   Frode Isaksen
    • [PATCH v2 2/6] spi: davinci: enable DMA when channels are defined in DT   Mark Brown
  • [PATCH v2 3/6] spi: davinci: use rx buffer as dummy tx buffer   Frode Isaksen
  • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Frode Isaksen
    • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Vignesh R
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Russell King - ARM Linux
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Frode Isaksen
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Russell King - ARM Linux
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Frode Isaksen
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Vignesh R
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Frode Isaksen
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Vignesh R
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Frode Isaksen
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Vignesh R
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Frode Isaksen
      • [PATCH v2 4/6] spi: davinci: flush caches when performing DMA   Vignesh R
  • [PATCH v2 5/6] spi: davinci: do not use DMA if transfer length is less than 16   Frode Isaksen
    • [PATCH v2 5/6] spi: davinci: do not use DMA if transfer length is less than 16   Arnd Bergmann
      • [PATCH v2 5/6] spi: davinci: do not use DMA if transfer length is less than 16   Frode Isaksen
      • [PATCH v2 5/6] spi: davinci: do not use DMA if transfer length is less than 16   Arnd Bergmann
  • [PATCH v2 6/6] spi: loopback-test: add option to use vmalloc'ed buffers   Frode Isaksen
• [GIT PULL] Reset controller fixes for 4.10   Philipp Zabel
  • [GIT PULL] Reset controller fixes for 4.10   Arnd Bergmann
• some question about arm stacktrace.c   yoma sophian
• [BUGFIX PATCH V2 0/3] kprobes/arm: Improve kprobes implementation on arm   Jon Medhurst (Tixy)
  • [BUGFIX PATCH V2 0/3] kprobes/arm: Improve kprobes implementation on arm   Masami Hiramatsu
    • [BUGFIX PATCH V2 0/3] kprobes/arm: Improve kprobes implementation on arm   Jon Medhurst (Tixy)
      • [BUGFIX PATCH V2 0/3] kprobes/arm: Improve kprobes implementation on arm   Masami Hiramatsu
• next-20170217 build: 2 failures 7 warnings (next-20170217)   Mark Brown
• [BOOTWRAPPER PATCH 0/3] Clean up CPU node management   Mark Rutland
  • [BOOTWRAPPER PATCH 2/3] FDT.pm: add helper to get a node's full path   Mark Rutland
  • [BOOTWRAPPER PATCH 3/3] Dynamically determine the set of CPUs   Mark Rutland
• [BOOTWRAPPER PATCH 1/3] FDT.pm: add helper to get untranslated reg   Mark Rutland
• [PATCH 0/3] ARM: mm: Fix ARMv7+ aliasing instuction cache invalidation   Andrew Gabbasov
  • [PATCH 1/3] ARM: mm: Add a separate API function for DCCMVAU cache operation   Andrew Gabbasov
• [PATCH 2/3] ARM: mm: Support VIPT aliasing but not coloring instruction cache   Andrew Gabbasov
• [PATCH 3/3] ARM: mm: Fix checks for supporting caches for mapping color alignment   Andrew Gabbasov
• [PATCH 07/10] perf: Directly pass PERF_AUX_* flags to perf_aux_output_end   Alexander Shishkin
  • [PATCH 07/10] perf: Directly pass PERF_AUX_* flags to perf_aux_output_end   Will Deacon
    • [PATCH 07/10] perf: Directly pass PERF_AUX_* flags to perf_aux_output_end   Alexander Shishkin
      • [PATCH 07/10] perf: Directly pass PERF_AUX_* flags to perf_aux_output_end   Will Deacon
      • [PATCH 07/10] perf: Directly pass PERF_AUX_* flags to perf_aux_output_end   Alexander Shishkin
• [PATCH 1/3] ARM: dts: imx6qp: reference PCIe node by handle   Lucas Stach
• [PATCH 2/3] ARM: dts: imx6qp: reference MMDC node by handle and remove duplication   Lucas Stach
• [PATCH 3/3] ARM: dts: imx6qp: correct IPU nodes   Lucas Stach
• [PATCH] arm64: kernel: Update kerneldoc for cpu_suspend() rename   Geert Uytterhoeven
  • [PATCH] arm64: kernel: Update kerneldoc for cpu_suspend() rename   Sudeep Holla
• [PATCH] ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules   Tony Lindgren
• [PATCH v3] arm64: dts: r8a7795: Add Cortex-A53 CPU cores   Geert Uytterhoeven
  • [PATCH v3] arm64: dts: r8a7795: Add Cortex-A53 CPU cores   Mark Rutland
    • [PATCH v3] arm64: dts: r8a7795: Add Cortex-A53 CPU cores   Geert Uytterhoeven
• [PATCH] Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"   Romain Izard
  • [PATCH] Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"   Alexandre Belloni
• [PATCH 0/3] arm64: dts: r8a7796: Add Secondary CPU Cores   Geert Uytterhoeven
  • [PATCH 1/3] arm64: dts: r8a7796: Add Cortex-A57 CPU cores   Geert Uytterhoeven
  • [PATCH 2/3] arm64: dts: r8a7796: Add CA53 L2 cache-controller node   Geert Uytterhoeven
    • [PATCH 2/3] arm64: dts: r8a7796: Add CA53 L2 cache-controller node   Sudeep Holla
      • [PATCH 2/3] arm64: dts: r8a7796: Add CA53 L2 cache-controller node   Geert Uytterhoeven
      • [PATCH 2/3] arm64: dts: r8a7796: Add CA53 L2 cache-controller node   Geert Uytterhoeven
      • [PATCH 2/3] arm64: dts: r8a7796: Add CA53 L2 cache-controller node   Sudeep Holla
  • [PATCH 3/3] arm64: dts: r8a7796: Add Cortex-A53 CPU cores   Geert Uytterhoeven
• [xlnx:master 329/356] arch/x86/include/asm/pgtable_types.h:56:43: warning: left shift count >= width of type   kbuild test robot
• [PATCH 00/20] arm/arm64: KVM: Rework the hyp-stub API   Marc Zyngier
  • [PATCH 01/20] arm64: hyp-stub: Implement HVC_RESET_VECTORS stub hypercall   Marc Zyngier
  • [PATCH 04/20] arm64: KVM: Allow the main HYP code to use the init hyp stub implementation   Marc Zyngier
  • [PATCH 05/20] arm64: KVM: Convert __cpu_reset_hyp_mode to using __hyp_reset_vectors   Marc Zyngier
  • [PATCH 06/20] arm64: KVM: Implement HVC_SOFT_RESTART in the init code   Marc Zyngier
  • [PATCH 07/20] ARM: hyp-stub: improve ABI   Marc Zyngier
  • [PATCH 08/20] ARM: soft-reboot into same mode that we entered the kernel   Marc Zyngier
  • [PATCH 09/20] ARM: KVM: Convert KVM to use HVC_GET_VECTORS   Marc Zyngier
  • [PATCH 10/20] ARM: hyp-stub: Use r1 for the soft-restart address   Marc Zyngier
    • [PATCH 10/20] ARM: hyp-stub: Use r1 for the soft-restart address   Ard Biesheuvel
      • [PATCH 10/20] ARM: hyp-stub: Use r1 for the soft-restart address   Marc Zyngier
  • [PATCH 11/20] ARM: Expose the VA/IDMAP offset   Marc Zyngier
  • [PATCH 12/20] ARM: hyp-stub: Implement HVC_RESET_VECTORS stub hypercall   Marc Zyngier
  • [PATCH 13/20] ARM: KVM: Implement HVC_RESET_VECTORS stub hypercall   Marc Zyngier
    • [PATCH 13/20] ARM: KVM: Implement HVC_RESET_VECTORS stub hypercall   Ard Biesheuvel
      • [PATCH 13/20] ARM: KVM: Implement HVC_RESET_VECTORS stub hypercall   Marc Zyngier
    • [PATCH 13/20] ARM: KVM: Implement HVC_RESET_VECTORS stub hypercall   Ard Biesheuvel
  • [PATCH 14/20] ARM: KVM: Implement HVC_GET_VECTORS in the init code   Marc Zyngier
  • [PATCH 15/20] ARM: KVM: Allow the main HYP code to use the init hyp stub implementation   Marc Zyngier
  • [PATCH 16/20] ARM: KVM: Convert __cpu_reset_hyp_mode to using __hyp_reset_vectors   Marc Zyngier
  • [PATCH 17/20] ARM: KVM: Implement HVC_SOFT_RESTART in the init code   Marc Zyngier
  • [PATCH 18/20] arm/arm64: KVM: Simplify __cpu_reset_hyp_mode   Marc Zyngier
  • [PATCH 19/20] arm/arm64: KVM: Remove kvm_get_idmap_start   Marc Zyngier
  • [PATCH 20/20] arm/arm64: Add hyp-stub API documentation   Marc Zyngier
• [PATCH 02/20] arm64: KVM: Implement HVC_RESET_VECTORS stub hypercall   Marc Zyngier
  • [PATCH 02/20] arm64: KVM: Implement HVC_RESET_VECTORS stub hypercall   James Morse
• [PATCH 03/20] arm64: KVM: Implement HVC_GET_VECTORS in the init code   Marc Zyngier
• [RFC 0/4] iio: trigger: Add OF support and GPIO based trigger   Fabrice Gasnier
  • [RFC 4/4] iio: trigger: add GPIO trigger   Fabrice Gasnier
    • [RFC 4/4] iio: trigger: add GPIO trigger   Lars-Peter Clausen
      • [RFC 4/4] iio: trigger: add GPIO trigger   Jonathan Cameron
      • [RFC 4/4] iio: trigger: add GPIO trigger   Fabrice Gasnier
      • [RFC 4/4] iio: trigger: add GPIO trigger   Jonathan Cameron
  • [RFC 0/4] iio: trigger: Add OF support and GPIO based trigger   Daniel Baluta
    • [RFC 0/4] iio: trigger: Add OF support and GPIO based trigger   Jonathan Cameron
• [RFC 1/4] dt-bindings: iio: introduce trigger providers, consumers   Fabrice Gasnier
• [RFC 2/4] iio: trigger: add OF support   Fabrice Gasnier
• [RFC 3/4] dt-bindings: iio: add support for GPIO triggers   Fabrice Gasnier
  • [RFC 3/4] dt-bindings: iio: add support for GPIO triggers   Jonathan Cameron
  • [RFC 3/4] dt-bindings: iio: add support for GPIO triggers   Linus Walleij
    • [RFC 3/4] dt-bindings: iio: add support for GPIO triggers   Fabrice Gasnier
• [PATCH 0/3] ARM: PM: Drop useless checks for PM_SUSPEND_STANDBY   Geert Uytterhoeven
  • [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY   Geert Uytterhoeven
    • [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY   Sekhar Nori
      • [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY   Geert Uytterhoeven
      • [PATCH 1/3] ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY   Sekhar Nori
  • [PATCH 3/3] ARM: socfpga: PM: Drop useless check for PM_SUSPEND_STANDBY   Geert Uytterhoeven
    • [PATCH 3/3] ARM: socfpga: PM: Drop useless check for PM_SUSPEND_STANDBY   Dinh Nguyen
  • [PATCH 0/3] ARM: PM: Drop useless checks for PM_SUSPEND_STANDBY   Tony Lindgren
• [PATCH 2/3] ARM: OMAP: PM: Drop useless checks for PM_SUSPEND_STANDBY   Geert Uytterhoeven
• [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Stephen Boyd
  • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Russell King - ARM Linux
    • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Stephen Boyd
  • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Luc Van Oostenryck
    • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Stephen Boyd
      • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Luc Van Oostenryck
      • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Mark Rutland
      • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Luc Van Oostenryck
      • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Will Deacon
      • [PATCH] arm64: traps: Mark __le16, __le32, __user variables properly   Luc Van Oostenryck
• [PATCH 0/2] arm64: dts: renesas: Upgrade to PSCI v1.0 to support Suspend-to-RAM   Geert Uytterhoeven
• [PATCH 1/2] arm64: dts: r8a7795: Upgrade to PSCI v1.0 to support Suspend-to-RAM   Geert Uytterhoeven
  • [PATCH 1/2] arm64: dts: r8a7795: Upgrade to PSCI v1.0 to support Suspend-to-RAM   Sudeep Holla
• [PATCH 2/2] arm64: dts: r8a7796: Upgrade to PSCI v1.0 to support Suspend-to-RAM   Geert Uytterhoeven
• Pointers for writing a good PCIe driver   Mason
  • Pointers for writing a good PCIe driver   Bjorn Helgaas
    • Pointers for writing a good PCIe driver   Mason
• [RFC PATCH v3 00/11] arm64: Add a compat vDSO   Will Deacon
• [RFC PATCH 0/9] Add support for Allwinner R40 SoC   Icenowy Zheng
  • [PATCH 1/9] arm: sunxi: add support for R40 SoC   Icenowy Zheng
  • [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40   Icenowy Zheng
    • [PATCH 2/9] pinctrl: sunxi: rename sun7i-a20 driver to sunxi-a20-r40   Maxime Ripard
  • [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl   Icenowy Zheng
    • [PATCH 3/9] pinctrl: sunxi: add support for R40 pinctrl   Maxime Ripard
  • [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC   Icenowy Zheng
    • [RFC PATCH 4/9] clk: sunxi-ng: support R40 SoC   Maxime Ripard
  • [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC   Icenowy Zheng
    • [linux-sunxi] [RFC PATCH 5/9] ARM: dts: sun8i: add DTSI file for R40 SoC   André Przywara
  • [RFC PATCH 6/9] ARM: dts: sun8i: add DTS file for Banana Pi M2 Ultra   Icenowy Zheng
  • [PATCH 7/9] phy: sun4i-usb: add support for R40 USB PHY   Icenowy Zheng
  • [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40   Icenowy Zheng
    • [RFC PATCH 8/9] ARM: dts: sun8i: add USB nodes for R40   Maxime Ripard
  • [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra   Icenowy Zheng
    • [RFC PATCH 9/9] ARM: dts: sun8i: enable USB host for Banana Pi M2 Ultra   Maxime Ripard
  • [RFC PATCH 0/9] Add support for Allwinner R40 SoC   Linus Walleij
• [PATCH v3 1/4] dt-bindings: add multidomain support to i.MX GPC DT binding   Lucas Stach
  • [PATCH v3 2/4] ARM: imx6: remove PGC handling from GPC driver   Lucas Stach
  • [PATCH v3 3/4] soc/imx: add new GPC driver   Lucas Stach
• [PATCH v3 4/4] ARM: imx6: adopt DT to new GPC binding   Lucas Stach
• [PATCH] hwtracing: coresight: Fixes coresight DT parse to get correct output port ID.   Mike Leach
  • [PATCH] hwtracing: coresight: Fixes coresight DT parse to get correct output port ID.   Mathieu Poirier
• [PATCH] arm64: dts: juno: update definition for programmable replicator.   Mike Leach
  • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Mathieu Poirier
  • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Sudeep Holla
    • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Mike Leach
      • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Sudeep Holla
      • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Mike Leach
      • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Sudeep Holla
    • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Mathieu Poirier
      • [PATCH] arm64: dts: juno: update definition for programmable replicator.   Sudeep Holla
• [PATCH 1/5] staging: bcm2835-audio: bcm2835.h: fix block comment warning   Nathan Howard
  • [PATCH 2/5] staging: bcm2835-audio: bcm2835.h: fix printk coding style issue   Nathan Howard
  • [PATCH 3/5] staging: bcm2835-audio: bcm2835.h: fix macro coding style issue   Nathan Howard
  • [PATCH 4/5] staging: bcm2835-audio: bcm2835.h: fix volatile coding style issue   Nathan Howard
    • [PATCH 4/5] staging: bcm2835-audio: bcm2835.h: fix volatile coding style issue   Joe Perches
      • [PATCH 4/5] staging: bcm2835-audio: bcm2835.h: fix volatile coding style issue   Adan Hawthorn
  • [PATCH 5/5] staging: bcm2835-audio: bcm2835.h: fix line length coding style issue   Nathan Howard
    • [PATCH 5/5] staging: bcm2835-audio: bcm2835.h: fix line length coding style issue   Joe Perches
      • [PATCH 5/5] staging: bcm2835-audio: bcm2835.h: fix line length coding style issue   Adan Hawthorn
      • [PATCH 5/5] staging: bcm2835-audio: bcm2835.h: fix line length coding style issue   Joe Perches
      • [PATCH 5/5] staging: bcm2835-audio: bcm2835.h: fix line length coding style issue   Adan Hawthorn
• [PATCH] DTS: Linksys Board: Add default trigger for sata led   Ansuel Smith
  • [PATCH] DTS: Linksys Board: Add default trigger for sata led   Jason Cooper
    • [PATCH] DTS: Linksys Board: Add default trigger for sata led   Andreas Färber
• [PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419   Ben Hutchings
  • [PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419   Thomas Petazzoni
    • [PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419   Ben Hutchings
      • [PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419   Thomas Petazzoni
      • [PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419   Ben Hutchings
      • [PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419   Thomas Petazzoni
• [PATCH] soc: ti: knav_dma: Fix some error handling   Christophe JAILLET
  • [PATCH] soc: ti: knav_dma: Fix some error handling   kbuild test robot
• [PATCH v2] soc: ti: knav_dma: Fix some error handling   Christophe JAILLET
• [PATCH 0/2] mfd: axp20x: Restore master mode support on AXP806   Rask Ingemann Lambertsen
  • [PATCH 1/2] dts: mfd: axp20x: Add xpowers,master-mode property for AXP806 PMICs   Rask Ingemann Lambertsen
    • [PATCH 1/2] dts: mfd: axp20x: Add xpowers,master-mode property for AXP806 PMICs   Chen-Yu Tsai
    • [PATCH 1/2] dts: mfd: axp20x: Add xpowers,master-mode property for AXP806 PMICs   Rob Herring
  • [PATCH 2/2] mfd: axp20x: Add support for dts property "xpowers,master-mode"   Rask Ingemann Lambertsen
    • [PATCH 2/2] mfd: axp20x: Add support for dts property "xpowers, master-mode"   Chen-Yu Tsai
• ARM: SoC fixes for v4.10   Arnd Bergmann
• [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement   Andreas Färber
  • [PATCH 3/4] ARM64: dts: marvell: Add IAP140 and Andromeda Box Edge   Andreas Färber
  • [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement   Gregory CLEMENT
    • [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement   Andreas Färber
      • [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement   Andrew Lunn
      • [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement   Robert Jarzmik
• [PATCH 1/4] ARM64: Prepare Marvell IAP140 aka PXA1908   Andreas Färber
• [PATCH 2/4] Documentation: devicetree: arm: Document Marvell IAP140   Andreas Färber
  • [PATCH 2/4] Documentation: devicetree: arm: Document Marvell IAP140   Thomas Petazzoni
    • [PATCH 2/4] Documentation: devicetree: arm: Document Marvell IAP140   Andreas Färber
      • [PATCH 2/4] Documentation: devicetree: arm: Document Marvell IAP140   Thomas Petazzoni
• [PATCH 4/4] ARM64: dts: marvell: iap140-andromeda-box-edge: Add uart0 clock   Andreas Färber
• [RFC 6/7] arm64: add __map_kernel_segment to accept additional vm flags   Hoeun Ryu
  • [RFC 6/7] arm64: add __map_kernel_segment to accept additional vm flags   Ard Biesheuvel
• [RFC 7/7] arm64: map seperately rodata sections for __ro_mostly_after_init section   Hoeun Ryu
  • [RFC 7/7] arm64: map seperately rodata sections for __ro_mostly_after_init section   Ard Biesheuvel
    • [RFC 7/7] arm64: map seperately rodata sections for __ro_mostly_after_init section   Mark Rutland
      • [RFC 7/7] arm64: map seperately rodata sections for __ro_mostly_after_init section   Kees Cook
• [PATCH] staging: bcm2835: Fix a memory leak in error handling path   Christophe JAILLET
  • [PATCH] staging: bcm2835: Fix a memory leak in error handling path   Stefan Wahren
    • [PATCH] staging: bcm2835: Fix a memory leak in error handling path   Dan Carpenter
      • [PATCH] staging: bcm2835: Fix a memory leak in error handling path   Stefan Wahren
      • [PATCH] staging: bcm2835: Fix a memory leak in error handling path   Dan Carpenter
• [PATCH] soc: mediatek: PMIC wrap: Fix error handling   Christophe JAILLET
• [PATCH] ARM: dts: sun8i: NanoPi NEO Air add WiFi / eMMC   Jelle van der Waa
  • [PATCH] ARM: dts: sun8i: NanoPi NEO Air add WiFi / eMMC   Rask Ingemann Lambertsen
• [PATCH] drm/rockchip: cdn-dp: Fix error handling   Christophe JAILLET
  • [PATCH] drm/rockchip: cdn-dp: Fix error handling   Mark yao
    • [PATCH] drm/rockchip: cdn-dp: Fix error handling   Christophe JAILLET
      • [PATCH] drm/rockchip: cdn-dp: Fix error handling   Mark yao
• [PATCH] [media] s5p-g2d: Fix error handling   Christophe JAILLET
• [PATCH v4 00/11] perf: arm64: Support for Hisilicon SoC Hardware event counters   Anurup M
• [PATCH v4 01/11] arm64: MAINTAINERS: hisi: Add hisilicon SoC PMU support   Anurup M
• [PATCH v4 02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Djtag dts bindings   Anurup M
  • [PATCH v4 02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Djtag dts bindings   Rob Herring
• [PATCH v4 03/11] dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU   Anurup M
  • [PATCH v4 03/11] dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU   Rob Herring
• [PATCH v4 05/11] drivers: perf: hisi: Update Kconfig for Hisilicon PMU support   Anurup M
• [PATCH v4 06/11] drivers: perf: hisi: Add support for Hisilicon Djtag driver   Anurup M
• [PATCH v4 07/11] drivers: perf: hisi: Add support for Hisilicon SoC event counters   Anurup M
• [PATCH v4 08/11] drivers: perf: hisi: use poll method to avoid L3C counter overflow   Anurup M
  • [PATCH v4 08/11] drivers: perf: hisi: use poll method to avoid L3C counter overflow   Mark Rutland
    • [PATCH v4 08/11] drivers: perf: hisi: use poll method to avoid L3C counter overflow   Anurup M
      • [PATCH v4 08/11] drivers: perf: hisi: use poll method to avoid L3C counter overflow   Marc Zyngier
    • [PATCH v4 08/11] drivers: perf: hisi: use poll method to avoid L3C counter overflow   Will Deacon
      • [PATCH v4 08/11] drivers: perf: hisi: use poll method to avoid L3C counter overflow   Anurup M
• [PATCH v4 09/11] drivers: perf: hisi: Miscellanous node(MN) event counting in perf   Anurup M
• [PATCH v4 10/11] drivers: perf: hisi: Handle counter overflow IRQ in MN PMU   Anurup M
  • [PATCH v4 10/11] drivers: perf: hisi: Handle counter overflow IRQ in MN PMU   Mark Rutland
    • [PATCH v4 10/11] drivers: perf: hisi: Handle counter overflow IRQ in MN PMU   Anurup M
      • [PATCH v4 10/11] drivers: perf: hisi: Handle counter overflow IRQ in MN PMU   Mark Rutland
      • [PATCH v4 10/11] drivers: perf: hisi: Handle counter overflow IRQ in MN PMU   Anurup M
• [PATCH v4 11/11] dts: arm64: hip07: Add Hisilicon SoC PMU support   Anurup M
• [PATCH 0/4] ARM: dts: Add Parvus Duracor C310 board support   Priit Laes
  • [PATCH 1/4] arm: defconfig: imx6: Added CONFIG_FHANDLE   Priit Laes
  • [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG   Priit Laes
    • [PATCH 2/4] devicetree: Add vendor prefix for Kontron AG   Rob Herring
  • [PATCH 4/4] arm: dts: imx: Basic board definition for Parvus Duracor C310   Priit Laes
• [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module   Priit Laes
  • [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module   Rob Herring
    • [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module   Russell King - ARM Linux
      • [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module   Rob Herring
      • [PATCH 3/4] arm: dts: imx: Add iMX6Q-based Kontron SMARC-sAMX6i module   Russell King - ARM Linux
• [PATCH] iio: adc: xilinx: Fix error handling   Christophe JAILLET
  • [PATCH] iio: adc: xilinx: Fix error handling   Lars-Peter Clausen
    • [PATCH] iio: adc: xilinx: Fix error handling   Christophe JAILLET
  • [PATCH] iio: adc: xilinx: Fix error handling   Christophe JAILLET
    • [PATCH] iio: adc: xilinx: Fix error handling   Lars-Peter Clausen
• [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay   Martin Blumenstingl
  • [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO   Martin Blumenstingl
  • [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO   Martin Blumenstingl
  • [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO   Martin Blumenstingl
  • [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO   Martin Blumenstingl
  • [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO   Martin Blumenstingl
  • [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO   Martin Blumenstingl
  • [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support   Martin Blumenstingl
  • [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration   Martin Blumenstingl
  • [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx   Martin Blumenstingl
  • [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay   Jerome Brunet
• [PATCH 0/1] ARM64: defconfig: add support for PWM LEDs   Martin Blumenstingl
  • [PATCH 1/1] ARM64: defconfig: enable the leds-pwm driver and default-on trigger   Martin Blumenstingl
• [PATCH 0/1] meson-gxl: improve support for the P212 board   Martin Blumenstingl
  • [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Martin Blumenstingl
    • [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Neil Armstrong
    • [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Rob Herring
• [xlnx:master 93/356] drivers/spi/spi-zynqmp-gqspi.c:285: undefined reference to `zynqmp_pm_mmio_read'   kbuild test robot
• iproute2 not function on CAN FD   Wenyou.Yang at microchip.com
  • iproute2 not function on CAN FD   Oliver Hartkopp
    • iproute2 not function on CAN FD   Wenyou.Yang at microchip.com
• [PATCH] PM / AVS: rockchip-io: add io selectors and supplies for rk3328   David Wu
  • [PATCH] PM / AVS: rockchip-io: add io selectors and supplies for rk3328   Heiko Stuebner
    • [PATCH] PM / AVS: rockchip-io: add io selectors and supplies for rk3328   David.Wu
• [PATCH] ipmi: bt-bmc: Use a regmap for register access   Andrew Jeffery
  • [PATCH] ipmi: bt-bmc: Use a regmap for register access   Corey Minyard
    • [PATCH] ipmi: bt-bmc: Use a regmap for register access   Andrew Jeffery
      • [PATCH] ipmi: bt-bmc: Use a regmap for register access   Corey Minyard
• [PATCH 1/2] arm: dts: imx6qdl-icore: Add backlight support for lvds   Jagan Teki
  • [PATCH 2/2] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Jagan Teki
• [PATCH v2] drm/rockchip: cdn-dp: Fix error handling   Christophe JAILLET
  • [PATCH v2] drm/rockchip: cdn-dp: Fix error handling   Mark yao
  • [PATCH v2] drm/rockchip: cdn-dp: Fix error handling   Sean Paul
• [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Chris Zhong
  • [RESEND PATCH v7 2/7] drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi   Chris Zhong
  • [RESEND PATCH v7 3/7] drm/rockchip/dsi: dw-mipi: correct the coding style   Chris Zhong
  • [RESEND PATCH v7 4/7] drm/rockchip/dsi: remove mode_valid function   Chris Zhong
  • [RESEND PATCH v7 5/7] dt-bindings: add power domain node for dw-mipi-rockchip   Chris Zhong
  • [RESEND PATCH v7 6/7] drm/rockchip/dsi: fix insufficient bandwidth of some panel   Chris Zhong
    • [RESEND PATCH v7 6/7] drm/rockchip/dsi: fix insufficient bandwidth of some panel   Sean Paul
  • [RESEND PATCH v7 7/7] drm/rockchip/dsi: add dw-mipi power domain support   Chris Zhong
  • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Sean Paul
    • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Chris Zhong
    • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   John Keeping
      • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Sean Paul
      • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   John Keeping
      • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Sean Paul
      • [RESEND PATCH v7 0/7] Rockchip dw-mipi-dsi driver   Chris Zhong
• [RESEND PATCH v7 1/7] dt-bindings: add rk3399 support for dw-mipi-rockchip   Chris Zhong
• [PATCH] drm/rockchip: vop: no need wait vblank on crtc enable   Mark Yao
• [PATCH v2 0/2] add basic SoC support for HiSilicon Hi3516CV300   Jiancheng Xue
  • [PATCH v2 1/2] arm: hisi: add ARCH_MULTI_V5 support   Jiancheng Xue
  • [PATCH v2 2/2] arm: dts: hisi: add dts files for Hi3516CV300 demo board   Jiancheng Xue
• [PATCH] pinctrl: uniphier: change pin names of aio/xirq for LD11   Masahiro Yamada
• [RESEND PATCH] pinctrl: uniphier: change pin names of aio/xirq for LD11   Masahiro Yamada
  • [RESEND PATCH] pinctrl: uniphier: change pin names of aio/xirq for LD11   Linus Walleij
• [BUG] hdlcd gets confused about base address   Russell King - ARM Linux
  • [BUG] hdlcd gets confused about base address   Liviu Dudau
    • [BUG] hdlcd gets confused about base address   Russell King - ARM Linux
    • [BUG] hdlcd gets confused about base address   Ville Syrjälä
      • [BUG] hdlcd gets confused about base address   Russell King - ARM Linux
      • [BUG] hdlcd gets confused about base address   Ville Syrjälä
      • [BUG] hdlcd gets confused about base address   Daniel Vetter
      • [BUG] hdlcd gets confused about base address   Liviu Dudau
      • [BUG] hdlcd gets confused about base address   Ville Syrjälä
• [PATCH v2 0/3] mtd: nand: Rework/cleanup the Atmel NAND driver   Boris Brezillon
  • [PATCH v2 2/3] mtd: nand: atmel: Document the new DT bindings   Boris Brezillon
    • [PATCH v2 2/3] mtd: nand: atmel: Document the new DT bindings   Nicolas Ferre
    • [PATCH v2 2/3] mtd: nand: atmel: Document the new DT bindings   Rob Herring
  • [PATCH v2 3/3] mtd: nand: Remove unused chip->write_page() hook   Boris Brezillon
  • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
    • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Nicolas Ferre
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Nicolas Ferre
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Håvard Skinnemoen
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Hans-Christian Noren Egtvedt
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Hans-Christian Noren Egtvedt
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Hans-Christian Noren Egtvedt
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Boris Brezillon
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Andy Shevchenko
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Alexandre Belloni
      • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Russell King - ARM Linux
  • [PATCH v2 1/3] mtd: nand: Cleanup/rework the atmel_nand driver   Nicolas Ferre
• [PATCH 0/2] arm{,64}/kvm: survive unknown traps from guests   Mark Rutland
  • [PATCH 1/2] arm/kvm: survive unknown traps from guests   Mark Rutland
• [PATCH 2/2] arm64/kvm: survive unknown traps from guests   Mark Rutland
  • [PATCH 2/2] arm64/kvm: survive unknown traps from guests   Suzuki K Poulose
    • [PATCH 2/2] arm64/kvm: survive unknown traps from guests   Mark Rutland
• [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance   Jisheng Zhang
  • [PATCH net-next v3 2/4] net: mvneta: avoid getting buf_phys_addr from rx_desc again   Jisheng Zhang
  • [PATCH net-next v3 3/4] net: mvneta: avoid reading from tx_desc as much as possible   Jisheng Zhang
  • [PATCH net-next v3 4/4] net: mvneta: Use cacheable memory to store the rx buffer DMA address   Jisheng Zhang
  • [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance   Gregory CLEMENT
    • [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance   Jisheng Zhang
      • [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance   David Miller
      • [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance   Marcin Wojtas
      • [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance   Jisheng Zhang
• [PATCH net-next v3 1/4] net: mvneta: avoid getting status from rx_desc as much as possible   Jisheng Zhang
• imx: Race when disabling RX in IMX.6 UART in half duplex   Piotr Figiel
  • imx: Race when disabling RX in IMX.6 UART in half duplex   Baruch Siach
    • imx: Race when disabling RX in IMX.6 UART in half duplex   Piotr Figiel
      • imx: Race when disabling RX in IMX.6 UART in half duplex   Baruch Siach
      • imx: Race when disabling RX in IMX.6 UART in half duplex   Piotr Figiel
      • imx: Race when disabling RX in IMX.6 UART in half duplex   Fabio Estevam
      • imx: Race when disabling RX in IMX.6 UART in half duplex   Sascha Hauer
      • imx: Race when disabling RX in IMX.6 UART in half duplex   Piotr Figiel
  • imx: Race when disabling RX in IMX.6 UART in half duplex   Uwe Kleine-König
• [PATCH v2 1/3] arm64: dts: exynos: Add missing unit name to Exynos7 SoC node   Javier Martinez Canillas
• [PATCH v2] ipmi: bt-bmc: Use a regmap for register access   Andrew Jeffery
  • [PATCH v2] ipmi: bt-bmc: Use a regmap for register access   Joel Stanley
• [PATCH v3] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
  • [PATCH v3] reset: Add i.MX7 SRC reset driver   Philipp Zabel
    • [PATCH v3] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
• [PATCH v3] soc/imx: Add GPCv2 power gating driver   Andrey Smirnov
  • [PATCH v3] soc/imx: Add GPCv2 power gating driver   Rob Herring
• [PATCH v5 0/4] i.MX7 PCI support   Andrey Smirnov
  • [PATCH v5 1/4] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
  • [PATCH v5 4/4] PCI: imx6: Allow probe deferal by reset GPIO   Andrey Smirnov
  • [PATCH v5 0/4] i.MX7 PCI support   Andrey Smirnov
• [PATCH v3 0/7] STM32 LCD-TFT display controller   Yannick Fertre
  • [PATCH v3 2/7] drm/st: Add STM32 LTDC driver   Yannick Fertre
  • [PATCH v3 4/7] drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H   Yannick Fertre
• [PATCH v3 1/7] dt-bindings: display: add STM32 LTDC driver   Yannick Fertre
  • [PATCH v3 1/7] dt-bindings: display: add STM32 LTDC driver   Rob Herring
• [PATCH v3 3/7] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Yannick Fertre
  • [PATCH v3 3/7] dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel   Rob Herring
• [PATCH v3 5/7] ARM: dts: stm32: Add ltdc support on stm32f429 MCU   Yannick Fertre
• [PATCH v3 6/7] ARM: dts: stm32: Enable ltdc & simple panel on stm32f429-Eval board   Yannick Fertre
• [PATCH v3 7/7] ARM: configs: stm32: ADD LDTC support   Yannick Fertre
• [RESEND PATCH v5 0/4] i.MX7 PCI support   Andrey Smirnov
  • [RESEND PATCH v5 3/4] PCI: imx6: Do not switch speed if Gen2 is disabled   Andrey Smirnov
• [RESEND PATCH v5 1/4] PCI: imx6: Add code to support i.MX7D   Andrey Smirnov
  • [RESEND PATCH v5 1/4] PCI: imx6: Add code to support i.MX7D   Rob Herring
• [RESEND PATCH v5 2/4] PCI: imx6: Do not wait for speed change on i.MX7   Andrey Smirnov
• [RESEND PATCH v5 4/4] PCI: imx6: Allow probe deferal by reset GPIO   Andrey Smirnov
• [linux-sunxi][PATCH] ARM: dts: sun8i-h3: orange-pi-2: Enable audio codec   codekipper at gmail.com
  • [linux-sunxi][PATCH] ARM: dts: sun8i-h3: orange-pi-2: Enable audio codec   Rask Ingemann Lambertsen
• [linux-sunxi][PATCH] ARM: dts: sun8i-h3: Add mmc2 node to the X2   codekipper at gmail.com
  • [linux-sunxi][PATCH] ARM: dts: sun8i-h3: Add mmc2 node to the X2   Maxime Ripard
• [PATCH] pwm: sunxi: wait for the READY bit   Olliver Schinagl
• [PATCH 0/7] memory: atmel-ebi: Add PM ops   Boris Brezillon
  • [PATCH 1/7] mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation   Boris Brezillon
  • [PATCH 2/7] memory: atmel-ebi: Simplify SMC config code   Boris Brezillon
  • [PATCH 3/7] memory: atmel-ebi: Stop using reg_field objects for simple things   Boris Brezillon
  • [PATCH 4/7] mfd: syscon: atmel-smc: Remove unused helpers/macros   Boris Brezillon
  • [PATCH 5/7] memory: atmel-ebi: Change naming scheme   Boris Brezillon
  • [PATCH 6/7] memory: atmel-ebi: Add missing ->numcs assignment   Boris Brezillon
  • [PATCH 7/7] memory: atmel-ebi: Add PM ops   Boris Brezillon
• [PATCH 0/3] mtd: nand: atmel: Add ->setup_data_interface() + PM ops   Boris Brezillon
  • [PATCH 1/3] memory: atmel-ebi: Change naming scheme   Boris Brezillon
  • [PATCH 1/3] mtd: nand: Pass the CS line to ->setup_data_interface()   Boris Brezillon
  • [PATCH 2/3] mtd: nand: atmel: Add ->setup_data_interface() hooks   Boris Brezillon
  • [PATCH 3/3] memory: atmel-ebi: Add PM ops   Boris Brezillon
  • [PATCH 3/3] mtd: nand: atmel: Add PM ops   Boris Brezillon
  • [PATCH 0/3] mtd: nand: atmel: Add ->setup_data_interface() + PM ops   Boris Brezillon
• [PATCH 2/3] memory: atmel-ebi: Add missing ->numcs assignment   Boris Brezillon
• [RESEND PATCH 0/3] mtd: nand: atmel: Add ->setup_data_interface() + PM ops   Boris Brezillon
  • [RESEND PATCH 0/3] mtd: nand: atmel: Add ->setup_data_interface() + PM ops   Boris Brezillon
  • [RESEND PATCH 0/3] mtd: nand: atmel: Add ->setup_data_interface() + PM ops   Boris Brezillon
    • [RESEND PATCH 1/3] mtd: nand: Pass the CS line to ->setup_data_interface()   Boris Brezillon
      • [RESEND PATCH 1/3] mtd: nand: Pass the CS line to ->setup_data_interface()   Marc Gonzalez
      • [RESEND PATCH 1/3] mtd: nand: Pass the CS line to ->setup_data_interface()   Boris Brezillon
      • [RESEND PATCH 1/3] mtd: nand: Pass the CS line to ->setup_data_interface()   Marc Gonzalez
      • [RESEND PATCH 1/3] mtd: nand: Pass the CS line to ->setup_data_interface()   Boris Brezillon
    • [RESEND PATCH 2/3] mtd: nand: atmel: Add ->setup_data_interface() hooks   Boris Brezillon
      • [RESEND PATCH 2/3] mtd: nand: atmel: Add ->setup_data_interface() hooks   Marek Vasut
      • [RESEND PATCH 2/3] mtd: nand: atmel: Add ->setup_data_interface() hooks   Boris Brezillon
• [RESEND PATCH 1/3] memory: atmel-ebi: Change naming scheme   Boris Brezillon
• [RESEND PATCH 2/3] memory: atmel-ebi: Add missing ->numcs assignment   Boris Brezillon
• [RESEND PATCH 3/3] memory: atmel-ebi: Add PM ops   Boris Brezillon
• [PATCH] arm64: defconfig: enable MVNETA   Gregory CLEMENT
• [PATCH v3 0/3] Extend rtc-armada38x support for Armada 7K/8K   Gregory CLEMENT
  • [PATCH v3 1/3] rtc: armada38x: Prepare driver to manage different versions   Gregory CLEMENT
    • [PATCH v3 1/3] rtc: armada38x: Prepare driver to manage different versions   Alexandre Belloni
  • [PATCH v3 2/3] rtc: armada38x: Add support for Armada 7K/8K   Gregory CLEMENT
    • [PATCH v3 2/3] rtc: armada38x: Add support for Armada 7K/8K   Alexandre Belloni
  • [PATCH v3 3/3] arm64: dts: marvell: add RTC description for Armada 7K/8K   Gregory CLEMENT
• [RESEND PATCH] dmaengine: bcm2835: Fix cyclic DMA period splitting   Matthias Reichl
  • [RESEND PATCH] dmaengine: bcm2835: Fix cyclic DMA period splitting   Vinod Koul
• [PATCH v2 1/4] arm: dts: imx6qdl-icore: Add backlight support for lvds   Jagan Teki
  • [PATCH v2 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Jagan Teki
    • [PATCH v2 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Fabio Estevam
      • [PATCH v2 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Fabio Estevam
  • [PATCH v2 3/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 initial support   Jagan Teki
  • [PATCH v2 4/4] arm: dts: imx6q-icore: Add LVDS support   Jagan Teki
• [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
  • [PATCH/RFC 2/6] PM / Wakeup: Add wakeup_source_available()   Geert Uytterhoeven
  • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
    • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Rafael J. Wysocki
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Rafael J. Wysocki
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 0/6] PSCI: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Rafael J. Wysocki
• [PATCH/RFC 1/6] alarmtimer: Postpone wake-up source registration until really available   Geert Uytterhoeven
• [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Geert Uytterhoeven
  • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Sudeep Holla
    • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Geert Uytterhoeven
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Sudeep Holla
  • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Pavel Machek
    • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Sudeep Holla
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Geert Uytterhoeven
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Mark Rutland
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Geert Uytterhoeven
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Mark Rutland
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Geert Uytterhoeven
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Sudeep Holla
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Geert Uytterhoeven
      • [PATCH/RFC 3/6] drivers: firmware: psci: Implement shallow suspend mode   Sudeep Holla
• [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
  • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
    • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Sudeep Holla
  • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Pavel Machek
    • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
    • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Mark Rutland
  • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Mark Rutland
    • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Geert Uytterhoeven
      • [PATCH/RFC 4/6] drivers: firmware: psci: Fix non-PMIC wake-up if SYSTEM_SUSPEND cuts power   Rafael J. Wysocki
• [PATCH/RFC 5/6] arm64: dts: r8a7795: Fix non-PMIC wake-up sources   Geert Uytterhoeven
• [PATCH/RFC 6/6] arm64: dts: r8a7796: Fix non-PMIC wake-up sources   Geert Uytterhoeven
• [RESEND PATCH 3/3] mtd: nand: atmel: Add PM ops   Boris Brezillon
• [PATCH] arm64: dts: r8a7796: add IMR-LX4 support   Sergei Shtylyov
• [RFT PATCH 0/2] ARM/arm64: module-plt: split core and init PLT sections   Ard Biesheuvel
  • [RFT PATCH 1/2] ARM: module: split core and init PLT sections   Ard Biesheuvel
    • [RFT PATCH 1/2] ARM: module: split core and init PLT sections   Angus Clark
      • [RFT PATCH 1/2] ARM: module: split core and init PLT sections   Ard Biesheuvel
    • [RFT PATCH 1/2] ARM: module: split core and init PLT sections   Ard Biesheuvel
  • [RFT PATCH 2/2] arm64: module: split core and init PLT sections   Ard Biesheuvel
• [PATCH 1/2] drm/rockchip: vop: verify display mode with vop max_output   Mark Yao
• [PATCH 2/2] drm/rockchip: vop: verify pixelclock for hdmi and displayport   Mark Yao
• [PATCH v3 1/4] arm: dts: imx6qdl-icore: Add backlight support for lvds   Jagan Teki
  • [PATCH v3 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Jagan Teki
    • [PATCH v3 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Rob Herring
      • [PATCH v3 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support   Russell King - ARM Linux
  • [PATCH v3 3/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 initial support   Jagan Teki
  • [PATCH v3 4/4] arm: dts: imx6q-icore: Add LVDS support   Jagan Teki
• [Linaro-mm-sig] [RFCv3][PATCH 3/5] arm64: Implement ARCH_HAS_FORCE_CACHE   Chen Feng
  • [Linaro-mm-sig] [RFCv3][PATCH 3/5] arm64: Implement ARCH_HAS_FORCE_CACHE   Laura Abbott
    • [Linaro-mm-sig] [RFCv3][PATCH 3/5] arm64: Implement ARCH_HAS_FORCE_CACHE   Chen Feng
      • [Linaro-mm-sig] [RFCv3][PATCH 3/5] arm64: Implement ARCH_HAS_FORCE_CACHE   Laura Abbott
• [PATCH v2] iio: adc: xilinx: Fix error handling   Christophe JAILLET
  • [PATCH v2] iio: adc: xilinx: Fix error handling   Lars-Peter Clausen
    • [PATCH v2] iio: adc: xilinx: Fix error handling   Jonathan Cameron
• [PATCH] cpufreq: qoriq: clean up unused code   yuantian.tang at nxp.com
  • [PATCH] cpufreq: qoriq: clean up unused code   Viresh Kumar
• [PATCH V2 0/3] Add Spreadtrum SP9860G support   Chunyan Zhang
  • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
    • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Sudeep Holla
    • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Mathieu Poirier
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Mathieu Poirier
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Sudeep Holla
    • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Rob Herring
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Rob Herring
      • [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G   Chunyan Zhang
  • [PATCH V2 2/3] Documentation: sprd: Add bindings for SP9860G   Chunyan Zhang
    • [PATCH V2 2/3] Documentation: sprd: Add bindings for SP9860G   Rob Herring
      • [PATCH V2 2/3] Documentation: sprd: Add bindings for SP9860G   Chunyan Zhang
  • [PATCH V2 3/3] serial: sprd: adjust TIMEOUT to a big value   Chunyan Zhang
• [PATCH v3 0/7] mmc: bcm2835: Add new driver for the sdhost controller   Gerd Hoffmann
  • [PATCH v3 1/7] dt-bindings: Add binding for brcm,bcm2835-sdhost.   Gerd Hoffmann
  • [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller.   Gerd Hoffmann
  • [PATCH v3 4/7] arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig   Gerd Hoffmann
  • [PATCH v3 5/7] arm64: set CONFIG_MMC_BCM2835=y in defconfig   Gerd Hoffmann
  • [PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost   Gerd Hoffmann
  • [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost   Gerd Hoffmann
    • [PATCH v3 7/7] ARM: dts: bcm2837: add &sdhci and &sdhost   Baruch Siach
• [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree   Gerd Hoffmann
  • [PATCH v3 3/7] mmc: bcm2835: add sdhost controller to devicetree   Stefan Wahren
• [PATCH] ARM: dts: am57xx-idk: Add DCAN support   Sekhar Nori
  • [PATCH] ARM: dts: am57xx-idk: Add DCAN support   Sekhar Nori
• [PATCH] tty/serial: atmel: increase ATMEL_MAX_UART   Alexandre Belloni
  • [PATCH] tty/serial: atmel: remove cache when unnecessary   Alexandre Belloni
    • [PATCH] tty/serial: atmel: remove cache when unnecessary   Richard Genoud
  • [PATCH] tty/serial: atmel: increase ATMEL_MAX_UART   Richard Genoud
• [PATCH v2 0/1] thermal: mt8173: minor mtk_thermal.c cleanups   Dawei Chien
  • [PATCH v2 1/1] thermal: mt8173: minor mtk_thermal.c cleanups   Dawei Chien
• [PATCH] ARM: dma-mapping: Fix dma_get_sgtable() for regions without struct page   Marek Szyprowski
• [RESEND PATCH] arm64: Add support for VMID aware PIPT instruction cache   Shanker Donthineni
  • [RESEND PATCH] arm64: Add support for VMID aware PIPT instruction cache   Will Deacon
• [RESEND PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation   Shanker Donthineni
• [PATCH v2 0/5] ARM: davinci: vpif capture & display support   Bartosz Golaszewski
  • [PATCH v2 1/5] ARM: davinci: da8xx: allow having multiple pdata-quirks   Bartosz Golaszewski
  • [PATCH v2 2/5] ARM: davinci: board-da850-evm: add I2C ID for VPIF   Bartosz Golaszewski
  • [PATCH v2 3/5] ARM: davinci: da8xx: add pdata-quirks for VPIF capture   Bartosz Golaszewski
  • [PATCH v2 4/5] ARM: da850-evm: add a fixed regulator for the UI board IO expander   Bartosz Golaszewski
  • [PATCH v2 5/5] ARM: davinci: add pdata-quirks for da850-evm vpif display   Bartosz Golaszewski
  • [PATCH v2 0/5] ARM: davinci: vpif capture & display support   Bartosz Golaszewski
• [PATCH v4] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
  • [PATCH v4] reset: Add i.MX7 SRC reset driver   Rob Herring
  • [PATCH v4] reset: Add i.MX7 SRC reset driver   Philipp Zabel
    • [PATCH v4] reset: Add i.MX7 SRC reset driver   Andrey Smirnov
• [PATCH V3 2/2] PCI: handle CRS returned by device after FLR   Sinan Kaya
  • [PATCH V3 2/2] PCI: handle CRS returned by device after FLR   Alex Williamson
    • [PATCH V3 2/2] PCI: handle CRS returned by device after FLR   Sinan Kaya
• master build: 2 failures 0 warnings (v4.10-1215-g2bfe01e)   Mark Brown
• next-20170221 build: 2 failures 9 warnings (next-20170221)   Mark Brown
  • next-20170221 build: 2 failures 9 warnings (next-20170221)   Bjorn Helgaas
• [PATCH 0/4] ARM: ep93xx: various updates   H Hartley Sweeten
  • [PATCH 2/4] ARM: ep93xx: simone: let the mmc_spi driver handle the card detect   H Hartley Sweeten
  • [PATCH 3/4] ARM: ep93xx: tidy up TS-72xx Watchdog resources   H Hartley Sweeten
  • [PATCH 4/4] ARM: ep93xx: Add lm70 HWMON sensor to TS-72xx boards   H Hartley Sweeten
• [PATCH 1/4] ARM: ep93xx: switch to SPARSEMEM   H Hartley Sweeten
• [PATCH] dmaengine: stm32-dma: fix up error dev_err message   Colin King
  • [PATCH] dmaengine: stm32-dma: fix up error dev_err message   Vinod Koul
• [PATCH v5 0/3] Fixes for colorspace logic in exynos-gsc and s5p-mfc drivers   Thibault Saunier
  • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Thibault Saunier
    • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Hans Verkuil
      • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Thibault Saunier
      • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Hans Verkuil
      • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Thibault Saunier
      • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Nicolas Dufresne
      • [PATCH v5 1/3] [media] exynos-gsc: Use user configured colorspace if provided   Thibault Saunier
  • [PATCH v5 2/3] [media] s5p-mfc: Set colorspace in VIDIO_{G, TRY}_FMT if DEFAULT provided   Thibault Saunier
    • [PATCH v5 2/3] [media] s5p-mfc: Set colorspace in VIDIO_{G,TRY}_FMT if DEFAULT provided   Andrzej Hajda
  • [PATCH v5 3/3] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Thibault Saunier
    • [PATCH v5 3/3] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Andrzej Hajda
      • [PATCH v5 3/3] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Thibault Saunier
      • [PATCH v5 3/3] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Nicolas Dufresne
      • [PATCH v5 3/3] [media] s5p-mfc: Check and set 'v4l2_pix_format:field' field in try_fmt   Andrzej Hajda
• [PATCH] ARM: deconfig: fix the moxart defconfig   Linus Walleij
• Tegra baseline test results for v4.10   Jon Hunter
• Schedule affinity_notify work while migrating IRQs during hot plug   Sodagudi Prasad
  • Schedule affinity_notify work while migrating IRQs during hot plug   Sodagudi Prasad
    • Schedule affinity_notify work while migrating IRQs during hot plug   Thomas Gleixner
• [PATCH V11 00/10] Add UEFI 2.6 and ACPI 6.1 updates for RAS on ARM64   Tyler Baicar
  • [PATCH V11 01/10] acpi: apei: read ack upon ghes record consumption   Tyler Baicar
  • [PATCH V11 02/10] ras: acpi/apei: cper: generic error data entry v3 per ACPI 6.1   Tyler Baicar
  • [PATCH V11 03/10] efi: parse ARM processor error   Tyler Baicar
  • [PATCH V11 04/10] arm64: exception: handle Synchronous External Abort   Tyler Baicar
  • [PATCH V11 05/10] acpi: apei: handle SEA notification type for ARMv8   Tyler Baicar
    • [PATCH V11 05/10] acpi: apei: handle SEA notification type for ARMv8   Xie XiuQi
  • [PATCH V11 06/10] acpi: apei: panic OS with fatal error status block   Tyler Baicar
  • [PATCH V11 07/10] efi: print unrecognized CPER section   Tyler Baicar
  • [PATCH V11 08/10] ras: acpi / apei: generate trace event for unrecognized CPER section   Tyler Baicar
  • [PATCH V11 09/10] trace, ras: add ARM processor error trace event   Tyler Baicar
  • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   Tyler Baicar
    • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   James Morse
      • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   gengdongjiu
      • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   Baicar, Tyler
    • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   Xiongfeng Wang
      • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   James Morse
      • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   Xiongfeng Wang
      • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   James Morse
      • [PATCH V11 10/10] arm/arm64: KVM: add guest SEA support   Xiongfeng Wang
• [PATCH] ASoC: mediatek: add I2C dependency for CS42XX8   Arnd Bergmann
  • Applied "ASoC: mediatek: add I2C dependency for CS42XX8" to the asoc tree   Mark Brown
• [PATCH v2 0/2] ARM/arm64: module-plt: split core and init PLT sections   Ard Biesheuvel
  • [PATCH v2 1/2] ARM: module: split core and init PLT sections   Ard Biesheuvel
    • [PATCH v2 1/2] ARM: module: split core and init PLT sections   Angus Clark
      • [PATCH v2 1/2] ARM: module: split core and init PLT sections   Ard Biesheuvel
  • [PATCH v2 2/2] arm64: module: split core and init PLT sections   Ard Biesheuvel
• [PATCH] spi/bcm63xx: fix typo in bcm63xx_spi_max_length breaking compilation   Jonas Gorski
  • Applied "spi/bcm63xx: fix typo in bcm63xx_spi_max_length breaking compilation" to the spi tree   Mark Brown
• [PATCH V2] arm64: hwpoison: add VM_FAULT_HWPOISON[_LARGE] handling   Tyler Baicar
• [PATCH V2] arm64: kconfig: allow support for memory failure handling   Tyler Baicar
  • [PATCH V2] arm64: kconfig: allow support for memory failure handling   Rafael J. Wysocki
    • [PATCH V2] arm64: kconfig: allow support for memory failure handling   Borislav Petkov
• [PATCH v10 0/3] Add support for the S6E3HA2 panel on TM2 board   Hoegeun Kwon
  • [PATCH v10 0/3] Add support for the S6E3HA2 panel on TM2 board   Hoegeun Kwon
• [PATCH v10 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding   Hoegeun Kwon
• [PATCH v10 2/3] drm/panel: Add support for S6E3HA2 panel driver on TM2 board   Hoegeun Kwon
• [PATCH v10 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board   Hoegeun Kwon
• [PATCH v2 0/8] ARM64: Initial Marvell IAP140 enablement   Andreas Färber
  • [PATCH v2 5/8] ARM64: Prepare Marvell IAP140 aka PXA1908   Andreas Färber
  • [PATCH v2 6/8] Documentation: devicetree: arm: marvell: Document IAP140   Andreas Färber
    • [PATCH v2 6/8] Documentation: devicetree: arm: marvell: Document IAP140   Rob Herring
  • [PATCH v2 7/8] ARM64: dts: marvell: Add IAP140 and Andromeda Box Edge   Andreas Färber
  • [PATCH v2 8/8] ARM64: dts: marvell: iap140-andromeda-box-edge: Add uart0 clock   Andreas Färber
  • [PATCH v2 0/8] ARM64: Initial Marvell IAP140 enablement   Rob Herring
    • [PATCH v2 0/8] ARM64: Initial Marvell IAP140 enablement   Andreas Färber
      • [PATCH v2 0/8] ARM64: Initial Marvell IAP140 enablement   Andreas Färber
      • [PATCH v2 0/8] ARM64: Initial Marvell IAP140 enablement   Rob Herring
• [PATCH v2 1/8] Documentation: arm: Marvell: Document IAP140   Andreas Färber
• [PATCH v2 2/8] tty: serial: Suppress deprecated SERIAL_PXA on arm64   Andreas Färber
• [PATCH v2 3/8] tty: serial: 8250_pxa: Implement mmp earlycon   Andreas Färber
• [PATCH v2 4/8] sound: soc: pxa: Suppress SND_MMP_SOC for arm64   Andreas Färber
  • [PATCH v2 4/8] sound: soc: pxa: Suppress SND_MMP_SOC for arm64   Mark Brown
    • [PATCH v2 4/8] sound: soc: pxa: Suppress SND_MMP_SOC for arm64   Andreas Färber
      • [PATCH v2 4/8] sound: soc: pxa: Suppress SND_MMP_SOC for arm64   Takashi Iwai
      • [PATCH v2 4/8] sound: soc: pxa: Suppress SND_MMP_SOC for arm64   Andreas Färber
• [PATCH] MAINTAINERS: remove swarren from bcm2835   Stephen Warren
  • [PATCH] MAINTAINERS: remove swarren from bcm2835   Eric Anholt
• [PATCH v1] clk: rockchip: add pll_wait_lock for pll_enable   Elaine Zhang
• [RFC] usb: gadget: scheduling while atomic in pxa27x_udc, IS_ERR_OR_NULL test, duplicated definition   Petr Cvek
  • [RFC] usb: gadget: scheduling while atomic in pxa27x_udc, IS_ERR_OR_NULL test, duplicated definition   Robert Jarzmik
    • [RFC] usb: gadget: scheduling while atomic in pxa27x_udc, IS_ERR_OR_NULL test, duplicated definition   Petr Cvek
• [PATCH v2 0/2] add dts files for hi3798cv200-Poplar board   Jiancheng Xue
  • [PATCH v2 2/2] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Jiancheng Xue
    • [PATCH v2 2/2] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Peter Griffin
    • [PATCH v2 2/2] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board   Andreas Färber
• [PATCH v2 1/2] dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board   Jiancheng Xue
  • [PATCH v2 1/2] dt-b