[PATCH 09/11] arm64: tegra: Add GPIO keys on P2771

Thierry Reding thierry.reding at gmail.com
Thu Feb 23 09:30:51 PST 2017


From: Thierry Reding <treding at nvidia.com>

The P2771 has three keys (power, volume up and volume down) that are
connected to pins on the AON GPIO controller.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 0d3c0996d832..1c195d71806d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -1,8 +1,42 @@
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
+
 #include "tegra186-p3310.dtsi"
 
 / {
 	model = "NVIDIA Tegra186 P2771-0000 Development Board";
 	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+	};
 };
-- 
2.11.1




More information about the linux-arm-kernel mailing list