[PATCH 08/11] [media] s5p-mfc: Add VP9 decoder support

Smitha T Murthy smitha.t at samsung.com
Mon Feb 6 00:42:00 PST 2017


On Thu, 2017-02-02 at 09:39 +0100, Andrzej Hajda wrote: 
> On 18.01.2017 11:02, Smitha T Murthy wrote:
> > Add support for codec definition and corresponding buffer
> > requirements for VP9 decoder.
> >
> > Signed-off-by: Smitha T Murthy <smitha.t at samsung.com>
> > ---
> >  drivers/media/platform/s5p-mfc/regs-mfc-v10.h   |    6 +++++
> >  drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c |    3 ++
> >  drivers/media/platform/s5p-mfc/s5p_mfc_common.h |    1 +
> >  drivers/media/platform/s5p-mfc/s5p_mfc_dec.c    |    8 ++++++
> >  drivers/media/platform/s5p-mfc/s5p_mfc_opr.h    |    2 +
> >  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c |   28 +++++++++++++++++++++++
> >  6 files changed, 48 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > index a57009a..81a0a96 100644
> > --- a/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v10.h
> > @@ -18,6 +18,8 @@
> >  /* MFCv10 register definitions*/
> >  #define S5P_FIMV_MFC_CLOCK_OFF_V10			0x7120
> >  #define S5P_FIMV_MFC_STATE_V10				0x7124
> > +#define S5P_FIMV_D_STATIC_BUFFER_ADDR_V10		0xF570
> > +#define S5P_FIMV_D_STATIC_BUFFER_SIZE_V10		0xF574
> >  
> >  /* MFCv10 Context buffer sizes */
> >  #define MFC_CTX_BUF_SIZE_V10		(30 * SZ_1K)	/* 30KB */
> > @@ -34,6 +36,10 @@
> >  
> >  /* MFCv10 codec defines*/
> >  #define S5P_FIMV_CODEC_HEVC_DEC		17
> > +#define S5P_FIMV_CODEC_VP9_DEC		18
> > +
> > +/* Decoder buffer size for MFC v10 */
> > +#define DEC_VP9_STATIC_BUFFER_SIZE	20480
> >  
> >  /* Encoder buffer size for MFC v10.0 */
> >  #define ENC_V100_H264_ME_SIZE(x, y)	\
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > index 76eca67..102b47e 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c
> > @@ -104,6 +104,9 @@ static int s5p_mfc_open_inst_cmd_v6(struct s5p_mfc_ctx *ctx)
> >  	case S5P_MFC_CODEC_HEVC_DEC:
> >  		codec_type = S5P_FIMV_CODEC_HEVC_DEC;
> >  		break;
> > +	case S5P_MFC_CODEC_VP9_DEC:
> > +		codec_type = S5P_FIMV_CODEC_VP9_DEC;
> > +		break;
> >  	case S5P_MFC_CODEC_H264_ENC:
> >  		codec_type = S5P_FIMV_CODEC_H264_ENC_V6;
> >  		break;
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > index 5c46060..e720ce6 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > @@ -80,6 +80,7 @@ static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b)
> >  #define S5P_MFC_CODEC_VC1RCV_DEC	6
> >  #define S5P_MFC_CODEC_VP8_DEC		7
> >  #define S5P_MFC_CODEC_HEVC_DEC		17
> > +#define S5P_MFC_CODEC_VP9_DEC		18
> >  
> >  #define S5P_MFC_CODEC_H264_ENC		20
> >  #define S5P_MFC_CODEC_H264_MVC_ENC	21
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > index 9f459b3..93626ed 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
> > @@ -164,6 +164,14 @@
> >  		.num_planes	= 1,
> >  		.versions	= MFC_V10_BIT,
> >  	},
> > +	{
> > +		.name		= "VP9 Encoded Stream",
> > +		.fourcc		= V4L2_PIX_FMT_VP9,
> > +		.codec_mode	= S5P_FIMV_CODEC_VP9_DEC,
> > +		.type		= MFC_FMT_DEC,
> > +		.num_planes	= 1,
> > +		.versions	= MFC_V10_BIT,
> > +	},
> >  };
> >  
> >  #define NUM_FORMATS ARRAY_SIZE(formats)
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h
> > index 6478f70..565decf 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h
> > @@ -170,6 +170,8 @@ struct s5p_mfc_regs {
> >  	void __iomem *d_used_dpb_flag_upper;/* v7 and v8 */
> >  	void __iomem *d_used_dpb_flag_lower;/* v7 and v8 */
> >  	void __iomem *d_min_scratch_buffer_size; /* v10 */
> > +	void __iomem *d_static_buffer_addr; /* v10 */
> > +	void __iomem *d_static_buffer_size; /* v10 */
> >  
> >  	/* encoder registers */
> >  	void __iomem *e_frame_width;
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > index b6cb280..da4202f 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > @@ -227,6 +227,13 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> >  			ctx->scratch_buf_size +
> >  			(ctx->mv_count * ctx->mv_size);
> >  		break;
> > +	case S5P_MFC_CODEC_VP9_DEC:
> > +		mfc_debug(2, "Use min scratch buffer size\n");
> > +		ctx->scratch_buf_size = ALIGN(ctx->scratch_buf_size, 256);
> 
> Again ALIGN and magic number.
> 
> Beside this:
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>

Yes if we are using the scratch buffer given by the firmware we need not
align. I will correct this in next version.

Thank you for the review.
Regards,
Smitha 
> 
> 
> > +		ctx->bank1.size =
> > +			ctx->scratch_buf_size +
> > +			DEC_VP9_STATIC_BUFFER_SIZE;
> > +		break;
> >  	case S5P_MFC_CODEC_H264_ENC:
> >  		if (IS_MFCV10(dev)) {
> >  			mfc_debug(2, "Use min scratch buffer size\n");
> > @@ -338,6 +345,7 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct s5p_mfc_ctx *ctx)
> >  	case S5P_MFC_CODEC_VC1_DEC:
> >  	case S5P_MFC_CODEC_MPEG2_DEC:
> >  	case S5P_MFC_CODEC_VP8_DEC:
> > +	case S5P_MFC_CODEC_VP9_DEC:
> >  		ctx->ctx.size = buf_size->other_dec_ctx;
> >  		break;
> >  	case S5P_MFC_CODEC_H264_ENC:
> > @@ -579,6 +587,14 @@ static int s5p_mfc_set_dec_frame_buffer_v6(struct s5p_mfc_ctx *ctx)
> >  		}
> >  	}
> >  
> > +	if (ctx->codec_mode == S5P_FIMV_CODEC_VP9_DEC) {
> > +		writel(buf_addr1, mfc_regs->d_static_buffer_addr);
> > +		writel(DEC_VP9_STATIC_BUFFER_SIZE,
> > +				mfc_regs->d_static_buffer_size);
> > +		buf_addr1 += DEC_VP9_STATIC_BUFFER_SIZE;
> > +		buf_size1 -= DEC_VP9_STATIC_BUFFER_SIZE;
> > +	}
> > +
> >  	mfc_debug(2, "Buf1: %zu, buf_size1: %d (frames %d)\n",
> >  			buf_addr1, buf_size1, ctx->total_dpb_count);
> >  	if (buf_size1 < 0) {
> > @@ -2286,6 +2302,18 @@ static unsigned int s5p_mfc_get_crop_info_v_v6(struct s5p_mfc_ctx *ctx)
> >  	R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8);
> >  	R(e_min_scratch_buffer_size, S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8);
> >  
> > +	if (!IS_MFCV10(dev))
> > +		goto done;
> > +
> > +	/* Initialize registers used in MFC v10 only.
> > +	 * Also, over-write the registers which have
> > +	 * a different offset for MFC v10.
> > +	 */
> > +
> > +	/* decoder registers */
> > +	R(d_static_buffer_addr, S5P_FIMV_D_STATIC_BUFFER_ADDR_V10);
> > +	R(d_static_buffer_size, S5P_FIMV_D_STATIC_BUFFER_SIZE_V10);
> > +
> >  done:
> >  	return &mfc_regs;
> >  #undef S5P_MFC_REG_ADDR
> 
> 
> 







More information about the linux-arm-kernel mailing list