[PATCH v4 1/2] arm64: dts: r8a7795: Add Cortex-A53 CPU cores
Geert Uytterhoeven
geert+renesas at glider.be
Fri Feb 24 05:59:27 PST 2017
This patch adds Cortex-A53 CPU cores to r8a7795 SoC for a total of 8
cores (4 x Cortex-A57 + 4 x Cortex-A53).
Based on work by Takeshi Kihara and Dirk Behme.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v4:
- Drop bogus links from the pmu_a57 node to the CA53 nodes,
v3:
- Link CPU nodes 100-103 to their L2 cache nodes,
v2:
- Rebased.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 46 ++++++++++++++++++++++++++++----
1 file changed, 41 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 8c43e9d7a6d2f799..d8e70d75781acaa0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -73,6 +73,42 @@
enable-method = "psci";
};
+ a53_0: cpu at 100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_1: cpu at 101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_2: cpu at 102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ a53_3: cpu at 103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
L2_CA57: cache-controller at 0 {
compatible = "cache";
reg = <0>;
@@ -166,7 +202,7 @@
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -317,13 +353,13 @@
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
cpg: clock-controller at e6150000 {
--
2.7.4
More information about the linux-arm-kernel
mailing list