[PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9500

[Rafał Miłecki]

On 23 February 2017 at 13:51, Rafał Miłecki <zajec5 at gmail.com> wrote:
> On 23 February 2017 at 13:44, Imre Kaloz <kaloz at openwrt.org> wrote:
>> On 2017-02-23 13:29, Rafał Miłecki wrote:
>>>
>>> On 23 February 2017 at 13:27, Imre Kaloz <kaloz at openwrt.org> wrote:
>>>>
>>>> As discussed for other platforms as well, please use the board's name as
>>>> the
>>>> same board can end up being sold under multiple model numbers.
>>>>
>>>> So please rename the file to bcm47094-linksys-panamera.dts
>>>
>>> Huh? Where did you get panamera name from?!
>>
>> Your manners shine on these dark days of winter. For about a decade now,
>> http://192.168.1.1/sysinfo.cgi will show you quite a bit of information if
>> you are too lazy to look into the GPL tarball or at the original bootlogs.
>
> Sadly Linksys doesn't sponsor me or provide me any hardware. The
> bootlogs I found:
> https://www.snbforums.com/threads/ea9500-serial-console-to-cfe.35228/
> http://www.dd-wrt.com/phpBB2/viewtopic.php?t=288470&start=30
> didn't include board name. As you probably can guess
> http://192.168.1.1/ was useful in my case as well.

Or rather "useless" ;)

-- 
Rafał