[PATCH 1/8] dt-bindings: add binding for the Allwinner DE2 CCU

Icenowy Zheng icenowy at aosc.xyz
Wed Feb 22 07:18:47 PST 2017


Allwinner "Display Engine 2.0" contains some clock controls in it.

Add them as a clock driver.

Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
 .../devicetree/bindings/clock/sunxi-de2.txt        | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sunxi-de2.txt

diff --git a/Documentation/devicetree/bindings/clock/sunxi-de2.txt b/Documentation/devicetree/bindings/clock/sunxi-de2.txt
new file mode 100644
index 000000000000..c19496f037a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi-de2.txt
@@ -0,0 +1,31 @@
+Allwinner Display Engine 2.0 Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun8i-a83t-de2-clk"
+		- "allwinner,sun50i-a64-de2-clk"
+		- "allwinner,sun50i-h5-de2-clk"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+	  Three are needed:
+  - "mod": the display engine module clock
+  - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de2_clocks: clock at 01000000 {
+	compatible = "allwinner,sun50i-a64-de2-clk";
+	reg = <0x01000000 0x1c>;
+	clocks = <&ccu CLK_DE>,
+		 <&ccu CLK_BUS_DE>;
+	clock-names = "mod",
+		      "bus";
+	resets = <&ccu RST_BUS_DE>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
-- 
2.11.1




More information about the linux-arm-kernel mailing list