[PATCH for-4.11 2/2] Revert "dt-bindings: phy: Add documentation for NSP USB3 PHY"

[Jon Mason]

On Wed, Feb 8, 2017 at 6:30 PM, Rafał Miłecki <zajec5 at gmail.com> wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
>
> This reverts commit c8ca631f9480 ("dt-bindings: phy: Add documentation
> for NSP USB3 PHY") to match reverting commit adding the new PHY driver.
> Please note we revert this commit before it reached stable release.
>
> If new compatible string is needed it should be added to the existing
> bcm-ns-usb3-phy.txt which already describes this PHY.
>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>

(previous email got caught in HTML filters)

Per the discussion with Rafal, this is acceptable

Acked-by: Jon Mason <jon.mason at broadcom.com>

> ---
>  .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt  | 39 ----------------------
>  1 file changed, 39 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
> deleted file mode 100644
> index e68ae5dec9c9..000000000000
> --- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -Broadcom USB3 phy binding for northstar plus SoC
> -The USB3 phy is internal to the SoC and is accessed using mdio interface.
> -
> -Required mdio bus properties:
> -- reg: Should be 0x0 for SoC internal USB3 phy
> -- #address-cells: must be 1
> -- #size-cells: must be 0
> -
> -Required USB3 PHY properties:
> -- compatible: should be "brcm,nsp-usb3-phy"
> -- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
> -- usb3-ctrl-syscon: handler of syscon node defining physical address
> -  of usb3 control register.
> -- #phy-cells: must be 0
> -
> -Required usb3 control properties:
> -- compatible: should be "brcm,nsp-usb3-ctrl"
> -- reg: offset and length of the control registers
> -
> -Example:
> -
> -       mdio at 0 {
> -               reg = <0x0>;
> -               #address-cells = <1>;
> -               #size-cells = <0>;
> -
> -               usb3_phy: usb-phy at 10 {
> -                       compatible = "brcm,nsp-usb3-phy";
> -                       reg = <0x10>;
> -                       usb3-ctrl-syscon = <&usb3_ctrl>;
> -                       #phy-cells = <0>;
> -                       status = "disabled";
> -               };
> -       };
> -
> -       usb3_ctrl: syscon at 104408 {
> -               compatible = "brcm,nsp-usb3-ctrl", "syscon";
> -               reg = <0x104408 0x3fc>;
> -       };
> --
> 2.11.0
>