[PATCH v3 6/7] ARM: dts: bcm283x: switch from &sdhci to &sdhost
Gerd Hoffmann
kraxel at redhat.com
Tue Feb 21 01:07:05 PST 2017
sdcard access with the sdhost controller is faster.
Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s
Differences on write access are pretty much in the noise.
Signed-off-by: Gerd Hoffmann <kraxel at redhat.com>
Acked-by: Eric Anholt <eric at anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 7d89af2..e6beecb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -65,13 +65,13 @@
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio48>;
- status = "okay";
bus-width = <4>;
};
&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
bus-width = <4>;
};
--
1.8.3.1
More information about the linux-arm-kernel
mailing list