[PATCH] ARM: dts: kirkwood: Fix SATA pinmux-ing for TS419

[Ben Hutchings]

On Mon, 2017-02-20 at 13:59 +0100, Thomas Petazzoni wrote:
> Hello,
> 
> Adding in Cc all the maintainers of the Kirkwood platforms.
> 
> On Sat, 18 Feb 2017 00:32:51 +0000, Ben Hutchings wrote:
> 
> > +&pmx_sata0 {
> > +	marvell,pins = "mpp15";
> > +};
> > +
> > +&pmx_sata1 {
> > +	marvell,pins = "mpp16";
> > +};
> 
> This is not only muxing mpp15 as sata0 and mpp16 as sata1, but also
> removes the muxing of sata0/sata1 pins described in kirkwood-6282.dtsi:
> 
>                         pmx_sata0: pmx-sata0 {
>                                 marvell,pins = "mpp5", "mpp21", "mpp23";
>                                 marvell,function = "sata0";
>                         };
>                         pmx_sata1: pmx-sata1 {
>                                 marvell,pins = "mpp4", "mpp20", "mpp22";
>                                 marvell,function = "sata1";
>                         };
> 
> So it means that MPP 4, 5, 20, 21, 22 and 23 will no longer be muxed as
> sata0/sata1. Is this really what you want?

That is precisely what I intended.  20-23 are used by the second
Ethernet port.  The old board code doesn't assign 4 or 5 at all.

Ben.

-- 
Ben Hutchings
If at first you don't succeed, you're doing about average.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: This is a digitally signed message part
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170220/13dad357/attachment.sig>