[PATCH v3] reset: Add i.MX7 SRC reset driver
Andrey Smirnov
andrew.smirnov at gmail.com
Mon Feb 20 11:46:26 PST 2017
On Mon, Feb 20, 2017 at 8:11 AM, Philipp Zabel <p.zabel at pengutronix.de> wrote:
> Hi Andrey,
>
> On Mon, 2017-02-20 at 07:26 -0800, Andrey Smirnov wrote:
>> Add reset controller driver exposing various reset faculties,
>> implemented by System Reset Controller IP block.
>>
>> Cc: Lucas Stach <l.stach at pengutronix.de>
>> Cc: Rob Herring <robh+dt at kernel.org>
>> Cc: Mark Rutland <mark.rutland at arm.com>
>> Cc: devicetree at vger.kernel.org
>> Cc: linux-kernel at vger.kernel.org
>> Cc: linux-arm-kernel at lists.infradead.org
>> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
>> ---
>>
>> Changes since v2 (see [v2]):
>>
>> - Fix typos
>>
>> - Kconfig/Makefile chagnes account for alphabetical sorting of
>> those files
>>
>> - Remove redundant includes
>>
>> - Make use of regmap_attach_dev and avoid storing refernce to
>> struct *dev in private data
>>
>> - Change code and headers to expose almost all of the reset
>> related bits in SRC IP block
>
> Thank you, this is looking much better!
>
>> Changes since v1 (see [v1]):
>>
>> - Various small DT bindings description fixes as per feedback
>> from Rob Herring
>>
>>
>> [v1] https://lkml.org/lkml/2017/2/6/554
>> [v2] https://lkml.org/lkml/2017/2/13/488
>>
>>
>> .../devicetree/bindings/reset/fsl,imx7-src.txt | 47 ++++++
>> drivers/reset/Kconfig | 8 +
>> drivers/reset/Makefile | 2 +
>> drivers/reset/reset-imx7.c | 186 +++++++++++++++++++++
>> include/dt-bindings/reset/imx7-reset.h | 62 +++++++
>> 5 files changed, 305 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>> create mode 100644 drivers/reset/reset-imx7.c
>> create mode 100644 include/dt-bindings/reset/imx7-reset.h
>>
>> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>> new file mode 100644
>> index 0000000..5e1afc3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>> @@ -0,0 +1,47 @@
>> +Freescale i.MX7 System Reset Controller
>> +======================================
>> +
>> +Please also refer to reset.txt in this directory for common reset
>> +controller binding usage.
>> +
>> +Required properties:
>> +- compatible: Should be "fsl,imx7-src", "syscon"
>> +- reg: should be register base and length as documented in the
>> + datasheet
>> +- interrupts: Should contain SRC interrupt
>> +- #reset-cells: 1, see below
>> +
>> +example:
>> +
>> +src: reset-controller at 30390000 {
>> + compatible = "fsl,imx7d-src", "syscon";
>> + reg = <0x30390000 0x2000>;
>> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>> + #reset-cells = <1>;
>> +};
>> +
>> +
>> +Specifying reset lines connected to IP modules
>> +==============================================
>> +
>> +The system reset controller can be used to reset various set of
>> +peripherals. Device nodes that need access to reset lines should
>> +specify them as a reset phandle in their corresponding node as
>> +specified in reset.txt.
>> +
>> +Example:
>> +
>> + pcie: pcie at 33800000 {
>> +
>> + ...
>> +
>> + resets = <&src IMX7_RESET_PCIEPHY>,
>> + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
>> + reset-names = "pciephy", "apps";
>> +
>> + ...
>> + };
>> +
>> +
>> +For list of all valid reset indicies see
>> +<dt-bindings/reset/imx7-reset.h>
>> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
>> index 172dc96..bea1800 100644
>> --- a/drivers/reset/Kconfig
>> +++ b/drivers/reset/Kconfig
>> @@ -27,6 +27,14 @@ config RESET_BERLIN
>> help
>> This enables the reset controller driver for Marvell Berlin SoCs.
>>
>> +config RESET_IMX7
>> + bool "i.MX7 Reset Driver"
>> + depends on SOC_IMX7D || COMPILE_TEST
>> + select MFD_SYSCON
>> + default SOC_IMX7D
>> + help
>> + This enables the reset controller driver for i.MX7 SoCs.
>> +
>> config RESET_LPC18XX
>> bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
>> default ARCH_LPC18XX
>> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
>> index 13b346e..a24aa80 100644
>> --- a/drivers/reset/Makefile
>> +++ b/drivers/reset/Makefile
>> @@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
>> obj-$(CONFIG_ARCH_TEGRA) += tegra/
>> obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
>> obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
>> +obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
>> obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
>> obj-$(CONFIG_RESET_MESON) += reset-meson.o
>> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
>> @@ -14,3 +15,4 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>> obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
>> obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
>> obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
>> +
>> diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
>> new file mode 100644
>> index 0000000..6e26796
>> --- /dev/null
>> +++ b/drivers/reset/reset-imx7.c
>> @@ -0,0 +1,186 @@
>> +/*
>> + * Copyright (c) 2017, Impinj, Inc.
>> + *
>> + * i.MX7 System Reset Controller (SRC) driver
>> + *
>> + * Author: Andrey Smirnov <andrew.smirnov at gmail.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; version 2 of the License.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/regmap.h>
>> +#include <dt-bindings/reset/imx7-reset.h>
>> +
>> +struct imx7_src {
>> + struct reset_controller_dev rcdev;
>> + struct regmap *regmap;
>> +};
>> +
>> +enum imx7_src_registers {
>> + SRC_A7RCR0 = 0x0004,
>> + SRC_M4RCR = 0x000c,
>> + SRC_ERCR = 0x0014,
>> + SRC_HSICPHY_RCR = 0x001c,
>> + SRC_USBOPHY1_RCR = 0x0020,
>> + SRC_USBOPHY2_RCR = 0x0024,
>> + SRC_MIPIPHY_RCR = 0x0028,
>> + SRC_PCIEPHY_RCR = 0x002c,
>> + SRC_DDRC_RCR = 0x1000,
>> +
>> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST = BIT(1),
>> + SRC_PCIEPHY_RCR_PCIEPHY_BTN = BIT(2),
>> +};
>> +
>> +struct imx7_src_signal {
>> + unsigned int offset, bit;
>> +};
>> +
>> +static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
>> + [IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
>> + [IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
>> + [IMX7_RESET_A7_CORE_RESET0] = { SRC_A7RCR0, BIT(4) },
>> + [IMX7_RESET_A7_CORE_RESET1] = { SRC_A7RCR0, BIT(5) },
>> + [IMX7_RESET_A7_DBG_RESET0] = { SRC_A7RCR0, BIT(8) },
>> + [IMX7_RESET_A7_DBG_RESET1] = { SRC_A7RCR0, BIT(9) },
>> + [IMX7_RESET_A7_ETM_RESET0] = { SRC_A7RCR0, BIT(12) },
>> + [IMX7_RESET_A7_ETM_RESET1] = { SRC_A7RCR0, BIT(13) },
>> + [IMX7_RESET_A7_SOC_DBG_RESET] = { SRC_A7RCR0, BIT(20) },
>> + [IMX7_RESET_A7_L2RESET] = { SRC_A7RCR0, BIT(21) },
>> + [IMX7_RESET_SW_M4C_RST] = { SRC_M4RCR, BIT(1) },
>> + [IMX7_RESET_SW_M4P_RST] = { SRC_M4RCR, BIT(2) },
>> + [IMX7_RESET_EIM_RST] = { SRC_ERCR, BIT(0) },
>> + [IMX7_RESET_HSICPHY_PORT_RST] = { SRC_HSICPHY_RCR, BIT(1) },
>> + [IMX7_RESET_USBPHY1_POR] = { SRC_USBOPHY1_RCR, BIT(0) },
>> + [IMX7_RESET_USBPHY1_PORT_RST] = { SRC_USBOPHY1_RCR, BIT(1) },
>> + [IMX7_RESET_USBPHY2_POR] = { SRC_USBOPHY2_RCR, BIT(0) },
>> + [IMX7_RESET_USBPHY2_PORT_RST] = { SRC_USBOPHY2_RCR, BIT(1) },
>> + [IMX7_RESET_MIPI_PHY_MRST] = { SRC_MIPIPHY_RCR, BIT(1) },
>> + [IMX7_RESET_MIPI_PHY_SRST] = { SRC_MIPIPHY_RCR, BIT(2) },
>> + [IMX7_RESET_PCIEPHY] = { /* Placeholder */ },
>> + [IMX7_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
>> + [IMX7_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
>> + [IMX7_RESET_DDRC_PRST] = { SRC_DDRC_RCR, BIT(0) },
>> + [IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
>> +};
>> +
>> +static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
>> +{
>> + return container_of(rcdev, struct imx7_src, rcdev);
>> +}
>> +
>> +static int imx7_reset_assert(struct reset_controller_dev *rcdev,
>> + unsigned long id)
>> +{
>> + struct imx7_src *imx7src = to_imx7_src(rcdev);
>> + const struct imx7_src_signal *signal = &imx7_src_signals[id];
>> + unsigned int value = signal->bit;
>> +
>> + switch (id) {
>> + case IMX7_RESET_PCIEPHY:
>> + regmap_update_bits(imx7src->regmap,
>> + SRC_PCIEPHY_RCR,
>> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST,
>> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST);
>> + regmap_update_bits(imx7src->regmap,
>> + SRC_PCIEPHY_RCR,
>> + SRC_PCIEPHY_RCR_PCIEPHY_BTN,
>> + SRC_PCIEPHY_RCR_PCIEPHY_BTN);
>
> Is it possible to assert (and deassert) both bits at the same time?
> That would allow to use the default case here.
Good point and I am not sure, I'll do an experiment and see if they can.
>
>> + break;
>> +
>> + case IMX7_RESET_PCIE_CTRL_APPS_EN:
>> + value = 0;
>> + default: /* FALLTHROUGH */
>> + regmap_update_bits(imx7src->regmap,
>> + signal->offset, signal->bit, value);
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
>> + unsigned long id)
>> +{
>> + struct imx7_src *imx7src = to_imx7_src(rcdev);
>> + const struct imx7_src_signal *signal = &imx7_src_signals[id];
>> + unsigned int value = 0;
>> +
>> + switch (id) {
>> + case IMX7_RESET_PCIEPHY:
>> + /*
>> + * wait for more than 10us to release phy g_rst and
>> + * btnrst
>> + */
>> + udelay(10);
>
> What is the purpose of this delay?
That's how downstream PCIe driver is using those lines. I haven't seen
anything in datasheet that would explain the purpose of it.
>
>> + regmap_update_bits(imx7src->regmap,
>> + SRC_PCIEPHY_RCR,
>> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST, 0);
>> + regmap_update_bits(imx7src->regmap,
>> + SRC_PCIEPHY_RCR,
>> + SRC_PCIEPHY_RCR_PCIEPHY_BTN, 0);
>
> Same as above. Assert and deassert using the same order makes me think
> that the order may not be important at all. If they do on the other hand
> have to be flipped in a certain order, it would be better to expose them
> separately.
>
>> + break;
>> + case IMX7_RESET_PCIE_CTRL_APPS_EN:
>> + value = signal->bit;
>> + default: /* FALLTHROUGH */
>> + regmap_update_bits(imx7src->regmap,
>> + signal->offset, signal->bit, value);
>> +
>> + break;
>> + };
>> +
>> + return 0;
>> +}
>> +
>> +static const struct reset_control_ops imx7_reset_ops = {
>> + .assert = imx7_reset_assert,
>> + .deassert = imx7_reset_deassert,
>> +};
>> +
>> +static int imx7_reset_probe(struct platform_device *pdev)
>> +{
>> + struct imx7_src *imx7src;
>> + struct device *dev = &pdev->dev;
>> + struct regmap_config config = { .name = "src" };
>> +
>> + imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
>> + if (!imx7src)
>> + return -ENOMEM;
>> +
>> + imx7src->regmap = syscon_node_to_regmap(dev->of_node);
>> + if (IS_ERR(imx7src->regmap)) {
>> + dev_err(dev, "Unable to get imx7-src regmap");
>> + return PTR_ERR(imx7src->regmap);
>> + }
>> + regmap_attach_dev(dev, imx7src->regmap, &config);
>> +
>> + imx7src->rcdev.owner = THIS_MODULE;
>> + imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
>> + imx7src->rcdev.ops = &imx7_reset_ops;
>> + imx7src->rcdev.of_node = dev->of_node;
>> +
>> + return devm_reset_controller_register(dev, &imx7src->rcdev);
>> +}
>> +
>> +static const struct of_device_id imx7_reset_dt_ids[] = {
>> + { .compatible = "fsl,imx7d-src", },
>> + { /* sentinel */ },
>> +};
>> +
>> +static struct platform_driver imx7_reset_driver = {
>> + .probe = imx7_reset_probe,
>> + .driver = {
>> + .name = KBUILD_MODNAME,
>> + .of_match_table = imx7_reset_dt_ids,
>> + },
>> +};
>> +builtin_platform_driver(imx7_reset_driver);
>> diff --git a/include/dt-bindings/reset/imx7-reset.h b/include/dt-bindings/reset/imx7-reset.h
>> new file mode 100644
>> index 0000000..6394817
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/imx7-reset.h
>> @@ -0,0 +1,62 @@
>> +/*
>> + * Copyright (C) 2017 Impinj, Inc.
>> + *
>> + * Author: Andrey Smirnov <andrew.smirnov at gmail.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef DT_BINDING_RESET_IMX7_H
>> +#define DT_BINDING_RESET_IMX7_H
>> +
>> +#define IMX7_RESET_A7_CORE_POR_RESET0 0
>> +#define IMX7_RESET_A7_CORE_POR_RESET1 1
>> +#define IMX7_RESET_A7_CORE_RESET0 2
>> +#define IMX7_RESET_A7_CORE_RESET1 3
>> +#define IMX7_RESET_A7_DBG_RESET0 4
>> +#define IMX7_RESET_A7_DBG_RESET1 5
>> +#define IMX7_RESET_A7_ETM_RESET0 6
>> +#define IMX7_RESET_A7_ETM_RESET1 7
>> +#define IMX7_RESET_A7_SOC_DBG_RESET 8
>> +#define IMX7_RESET_A7_L2RESET 9
>> +#define IMX7_RESET_SW_M4C_RST 10
>> +#define IMX7_RESET_SW_M4P_RST 11
>> +#define IMX7_RESET_EIM_RST 12
>> +#define IMX7_RESET_HSICPHY_PORT_RST 13
>> +#define IMX7_RESET_USBPHY1_POR 14
>> +#define IMX7_RESET_USBPHY1_PORT_RST 15
>> +#define IMX7_RESET_USBPHY2_POR 16
>> +#define IMX7_RESET_USBPHY2_PORT_RST 17
>> +#define IMX7_RESET_MIPI_PHY_MRST 18
>> +#define IMX7_RESET_MIPI_PHY_SRST 19
>> +
>> +/*
>> + * IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
>> + * and PCIEPHY_G_RST
>> + */
>> +#define IMX7_RESET_PCIEPHY 20
>> +#define IMX7_RESET_PCIEPHY_PERST 21
>> +
>> +/*
>> + * IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
>> + * can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
>> + * of as one
>> + */
>> +#define IMX7_RESET_PCIE_CTRL_APPS_EN 22
>> +#define IMX7_RESET_DDRC_PRST 23
>> +#define IMX7_RESET_DDRC_CORE_RST 24
>> +
>> +#define IMX7_RESET_NUM 25
>> +
>> +#endif
>> +
>
> regards
> Philipp
>
>
More information about the linux-arm-kernel
mailing list