[PATCH net-next 6/8] net: ethernet: annapurna: add wol helpers to the Alpine driver
Antoine Tenart
antoine.tenart at free-electrons.com
Fri Feb 3 10:12:14 PST 2017
Implement the get_wol() and set_wol() helpers in the Annapurna Labs
Alpine Ethernet driver.
---
drivers/net/ethernet/annapurna/al_eth.c | 44 +++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/net/ethernet/annapurna/al_eth.c b/drivers/net/ethernet/annapurna/al_eth.c
index 8dd84f66b5d1..d06a75a49ce5 100644
--- a/drivers/net/ethernet/annapurna/al_eth.c
+++ b/drivers/net/ethernet/annapurna/al_eth.c
@@ -2519,10 +2519,54 @@ static u32 al_eth_get_rxfh_indir_size(struct net_device *netdev)
return AL_ETH_RX_RSS_TABLE_SIZE;
}
+static void al_eth_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct al_eth_adapter *adapter = netdev_priv(netdev);
+ struct phy_device *phydev;
+
+ wol->wolopts = adapter->wol;
+
+ if ((adapter) && (adapter->phy_exist) && (adapter->mdio_bus)) {
+ phydev = mdiobus_get_phy(adapter->mdio_bus, adapter->phy_addr);
+ if (phydev) {
+ phy_ethtool_get_wol(phydev, wol);
+ wol->supported |= WAKE_PHY;
+ return;
+ }
+ }
+
+ wol->supported |= WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+}
+
+static int al_eth_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct al_eth_adapter *adapter = netdev_priv(netdev);
+ struct phy_device *phydev;
+
+ if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ adapter->wol = wol->wolopts;
+
+ if ((adapter) && (adapter->phy_exist) && (adapter->mdio_bus)) {
+ phydev = mdiobus_get_phy(adapter->mdio_bus, adapter->phy_addr);
+ if (phydev)
+ return phy_ethtool_set_wol(phydev, wol);
+ }
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
static const struct ethtool_ops al_eth_ethtool_ops = {
.get_settings = al_eth_get_settings,
.set_settings = al_eth_set_settings,
.get_drvinfo = al_eth_get_drvinfo,
+ .get_wol = al_eth_get_wol,
+ .set_wol = al_eth_set_wol,
.get_msglevel = al_eth_get_msglevel,
.set_msglevel = al_eth_set_msglevel,
--
2.11.0
More information about the linux-arm-kernel
mailing list