[PATCH v7] arm64: Work around Falkor erratum 1003

[Catalin Marinas]

On Wed, Feb 08, 2017 at 03:08:37PM -0500, Christopher Covington wrote:
> The Qualcomm Datacenter Technologies Falkor v1 CPU may allocate TLB entries
> using an incorrect ASID when TTBRx_EL1 is being updated. When the erratum
> is triggered, page table entries using the new translation table base
> address (BADDR) will be allocated into the TLB using the old ASID. All
> circumstances leading to the incorrect ASID being cached in the TLB arise
> when software writes TTBRx_EL1[ASID] and TTBRx_EL1[BADDR], a memory
> operation is in the process of performing a translation using the specific
> TTBRx_EL1 being written, and the memory operation uses a translation table
> descriptor designated as non-global. EL2 and EL3 code changing the EL1&0
> ASID is not subject to this erratum because hardware is prohibited from
> performing translations from an out-of-context translation regime.
> 
> Consider the following pseudo code.
> 
>   write new BADDR and ASID values to TTBRx_EL1
> 
> Replacing the above sequence with the one below will ensure that no TLB
> entries with an incorrect ASID are used by software.
> 
>   write reserved value to TTBRx_EL1[ASID]
>   ISB
>   write new value to TTBRx_EL1[BADDR]
>   ISB
>   write new value to TTBRx_EL1[ASID]
>   ISB
> 
> When the above sequence is used, page table entries using the new BADDR
> value may still be incorrectly allocated into the TLB using the reserved
> ASID. Yet this will not reduce functionality, since TLB entries incorrectly
> tagged with the reserved ASID will never be hit by a later instruction.
> 
> Based on work by Shanker Donthineni <shankerd at codeaurora.org>
> 
> Signed-off-by: Christopher Covington <cov at codeaurora.org>

Reviewed-by: Catalin Marinas <catalin.marinas at arm.com>