[PATCH 0/5] clk: sunxi-ng: Add support for A83T CCU
Chen-Yu Tsai
wens at csie.org
Mon Feb 13 19:35:21 PST 2017
Hi everyone,
This is yet another series that adds support for the A83T CCU.
The A83T CCU has a mix of new styled (like the A80) clocks at
old (like A3x) offsets. Some differences include:
- D1/D2 style PLL clocks
- divisible audio module clocks
- new timing mode for mmc2 module clock
Patch 1 fixes the mp style clock to take into account pre-dividers
for the .set_rate and .recalc_rate callbacks.
Patch 2 makes the gate clocks support common pre-dividers. This is
used to make the HSIC 12M clock have the right clock rate.
Patch 3 adds a compatible string for the A83T CCU to the sunxi-ccu
bindings.
Patch 4 adds the driver for the A83T CCU.
Patch 5 adds the CCU device nodes, and fixes up any existing clock
phandles in the dtsi.
Let me know what you think.
Regards
ChenYu
Chen-Yu Tsai (5):
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
clk: sunxi-ng: gate: Support common pre-dividers
clk: sunxi-ng: Add compatible string for A83T CCU to bindings
clk: sunxi-ng: Add driver for A83T CCU
ARM: dts: sun8i-a83t: Add CCU device nodes
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
arch/arm/boot/dts/sun8i-a83t.dtsi | 18 +-
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 898 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-a83t.h | 65 ++
drivers/clk/sunxi-ng/ccu_gate.c | 47 ++
drivers/clk/sunxi-ng/ccu_mp.c | 8 +
include/dt-bindings/clock/sun8i-a83t-ccu.h | 138 ++++
include/dt-bindings/reset/sun8i-a83t-ccu.h | 98 +++
10 files changed, 1282 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h
create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h
--
2.11.0
More information about the linux-arm-kernel
mailing list