[linux-sunxi] [PATCH 3/8] pinctrl: sunxi: Add A64 R_PIO controller support
Chen-Yu Tsai
wens at csie.org
Mon Feb 13 07:09:48 PST 2017
On Wed, Feb 8, 2017 at 6:00 PM, Icenowy Zheng <icenowy at aosc.xyz> wrote:
> The A64 has a R_PIO pin controller, similar to the one found on the H3 SoC.
> Add support for the pins controlled by the R_PIO controller.
>
> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
> ---
> drivers/pinctrl/sunxi/Kconfig | 5 +
> drivers/pinctrl/sunxi/Makefile | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c | 143 +++++++++++++++++++++++++++
> 3 files changed, 149 insertions(+)
> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c
>
> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
> index 92d845827577..df5089841c6e 100644
> --- a/drivers/pinctrl/sunxi/Kconfig
> +++ b/drivers/pinctrl/sunxi/Kconfig
> @@ -72,6 +72,11 @@ config PINCTRL_SUN50I_A64
> bool
> select PINCTRL_SUNXI
>
> +config PINCTRL_SUN50I_A64_R
> + bool
> + depends on RESET_CONTROLLER
> + select PINCTRL_SUNXI
> +
> config PINCTRL_SUN50I_H5
> bool
> select PINCTRL_SUNXI
> diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
> index f9a3855c42f1..ce956258cc39 100644
> --- a/drivers/pinctrl/sunxi/Makefile
> +++ b/drivers/pinctrl/sunxi/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
> obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
> obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
> obj-$(CONFIG_PINCTRL_SUN50I_A64) += pinctrl-sun50i-a64.o
> +obj-$(CONFIG_PINCTRL_SUN50I_A64_R) += pinctrl-sun50i-a64-r.o
> obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
> obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
> obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c
> new file mode 100644
> index 000000000000..90996a63689b
> --- /dev/null
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c
> @@ -0,0 +1,143 @@
> +/*
> + * Allwinner A64 SoCs special pins pinctrl driver.
> + *
> + * Based on pinctrl-sun8i-a23-r.c
> + *
> + * Copyright (C) 2016 Icenowy Zheng
> + * Icenowy Zheng <icenowy at aosc.xyz>
> + *
> + * Copyright (C) 2014 Chen-Yu Tsai
> + * Chen-Yu Tsai <wens at csie.org>
> + *
> + * Copyright (C) 2014 Boris Brezillon
> + * Boris Brezillon <boris.brezillon at free-electrons.com>
> + *
> + * Copyright (C) 2014 Maxime Ripard
> + * Maxime Ripard <maxime.ripard at free-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include "pinctrl-sunxi.h"
> +
> +static const struct sunxi_desc_pin sun50i_a64_r_pins[] = {
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_rsb"), /* SCK */
> + SUNXI_FUNCTION(0x3, "s_i2c"), /* SCK */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_rsb"), /* SDA */
> + SUNXI_FUNCTION(0x3, "s_i2c"), /* SDA */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_uart"), /* TX */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PL_EINT2 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_uart"), /* RX */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PL_EINT3 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag"), /* MS */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PL_EINT4 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag"), /* CK */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PL_EINT5 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag"), /* DO */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PL_EINT6 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag"), /* DI */
The function ID for JTAG on pins PL4 ~ PL7 should be 0x2, not 0x3.
Otherwise,
Acked-by: Chen-Yu Tsai <wens at csie.org>
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PL_EINT7 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_i2c"), /* SCK */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PL_EINT8 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_i2c"), /* SDA */
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PL_EINT9 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_pwm"),
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PL_EINT10 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_cir_rx"),
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PL_EINT11 */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 12),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)), /* PL_EINT12 */
> +};
> +
> +static const struct sunxi_pinctrl_desc sun50i_a64_r_pinctrl_data = {
> + .pins = sun50i_a64_r_pins,
> + .npins = ARRAY_SIZE(sun50i_a64_r_pins),
> + .pin_base = PL_BASE,
> + .irq_banks = 1,
> +};
> +
> +static int sun50i_a64_r_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct reset_control *rstc;
> + int ret;
> +
> + rstc = devm_reset_control_get(&pdev->dev, NULL);
> + if (IS_ERR(rstc)) {
> + dev_err(&pdev->dev, "Reset controller missing\n");
> + return PTR_ERR(rstc);
> + }
> +
> + ret = reset_control_deassert(rstc);
> + if (ret)
> + return ret;
> +
> + ret = sunxi_pinctrl_init(pdev,
> + &sun50i_a64_r_pinctrl_data);
> +
> + if (ret)
> + reset_control_assert(rstc);
> +
> + return ret;
> +}
> +
> +static const struct of_device_id sun50i_a64_r_pinctrl_match[] = {
> + { .compatible = "allwinner,sun50i-a64-r-pinctrl", },
> + {}
> +};
> +
> +static struct platform_driver sun50i_a64_r_pinctrl_driver = {
> + .probe = sun50i_a64_r_pinctrl_probe,
> + .driver = {
> + .name = "sun50i-a64-r-pinctrl",
> + .of_match_table = sun50i_a64_r_pinctrl_match,
> + },
> +};
> +builtin_platform_driver(sun50i_a64_r_pinctrl_driver);
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
More information about the linux-arm-kernel
mailing list