[PATCH 00/37] PCI: Support for configurable PCI endpoint
Kishon Vijay Abraham I
kishon at ti.com
Wed Feb 1 04:31:58 PST 2017
- list
Hi Bjorn,
How do you want to handle this series? I'll send one more version of the series
including the directory restructuring in the same series. Should it be based on
your -next?
Cheers
Kishon
On Thursday 12 January 2017 03:55 PM, Kishon Vijay Abraham I wrote:
> The RFC series that was sent before this patch series can be found at [1].
> The patches are split here so that it can be better reviewed.
>
> This main purpose of this patch series is to
> *) add PCI endpoint core layer
> *) modifie designware/dra7xx driver to be configured in EP mode
> *) add a PCI endpoint *test* function driver and corresponding host
> driver
>
> Major Improvements from RFC:
> *) support multi-function devices (hw supported not virtual)
> *) Access host side buffers
> *) Raise MSI interrupts
> *) Add user space program to use the host side PCI driver
> *) Adapt all other users of designware to use the new design (only
> compile tested. Since I have only dra7xx boards, the new design
> has only been tested in dra7xx. I'd require the help of others
> to test the platforms they have access to).
>
> This patch series has been developed on top of 4.10-rc1, [2] & [3]
>
> [1] -> https://lwn.net/Articles/700605/
> [2] -> https://lkml.org/lkml/2016/12/28/34
> [3] -> https://lkml.org/lkml/2017/1/11/238
>
> I've also pushed the tree to
> git://git.ti.com/linux-phy/linux-phy.git pci_ep_v1
>
> Using PCI EPF Test:
> ON THE EP SIDE:
> ***************
> /* EP function is configured using configfs */
> # mount -t configfs none /sys/kernel/config
>
> /* PCI EP core layer creates "pci_ep" entry in configfs */
> # cd /sys/kernel/config/pci_ep/
>
> /*
> * This is the 1st step in creating an endpoint function. This
> * creates the endpoint device.
> */
> # mkdir dev
>
> /*
> * dev has 2 entries. *epc* for binding a EPC device and *epf*
> * is a directory containing all the functions of the endpoint
> */
> # ls dev
> epc epf
>
> /*
> * This creates the endpoint function device *instance*. The string
> * before the .<num> suffix will identify the driver this
> * EP function will bind to.
> * Just pci_epf_test is also valid. The .<num> suffix is used
> * if there are multiple PCI controllers and all of them wants
> * to use the same function.
> */
> # mkdir dev/epf/pci_epf_test.0
>
> /*
> * When the above command is given, the function device will
> * also be bound to a function driver. To find the list of
> * function drivers available in the system, use the following
> * command. To create a new driver, the following can be referred
> * drivers/pci/endpoint/functions/pci-epf-test.c
> */
> # ls /sys/bus/pci-epf/drivers
> pci_epf_test
>
> /* Now configure the endpoint function */
> /* These are the fields that can be configured */
> # ls dev/epf/pci_epf_test.0/
> baseclass_code function progif_code subsys_id
> cache_line_size interrupt_pin revid subsys_vendor_id
> deviceid msi_interrupts subclass_code vendorid
>
> /* The function driver will populate these fields with default values */
> # cat dev/epf/pci_epf_test.0/vendorid
> 0xffff
>
> # cat dev/epf/pci_epf_test.0/interrupt_pin
> 0x0001
>
> /* The user can configure any of these fields */
> # echo 0x104c > dev/epf/pci_epf_test.0/vendorid
> # echo 16 > dev/epf/pci_epf_test.0/msi_interrupts
>
> /*
> * Next is binding this function driver to the controller driver. In
> * order to find the possible controller drivers that this function
> * driver can be bound to, the following sysfs entry can be used
> */
> # ls /sys/class/pci_epc/
> 51000000.pci
>
> /* Now bind the function driver to the controller driver */
> # echo "51000000.pcie_ep" > epc
> [ 494.743487] dra7-pcie 51000000.pcie: no free inbound window
> [ 494.749367] pci_epf_test pci_epf_test.0: failed to set BAR4
> [ 494.755238] dra7-pcie 51000000.pcie: no free inbound window
> [ 494.761451] pci_epf_test pci_epf_test.0: failed to set BAR5
>
> /*
> * the above error messages are due to non availability of free
> * inbound windows. So the function drivers in dra7xx can use
> * only 4 (BAR0..BAR3) BARs
> */
>
> /****** PCI endpoint is configured ******/
>
> ON THE HOST SIDE:
> *****************
> # ./pcitest.sh
> BAR tests
>
> BAR0: OKAY
> BAR1: OKAY
> BAR2: OKAY
> BAR3: OKAY
> BAR4: NOT OKAY
> BAR5: NOT OKAY
>
> Interrupt tests
>
> LEGACY IRQ: NOT OKAY
> MSI1: OKAY
> MSI2: OKAY
> MSI3: OKAY
> MSI4: OKAY
> MSI5: OKAY
> MSI6: OKAY
> MSI7: OKAY
> MSI8: OKAY
> MSI9: OKAY
> MSI10: OKAY
> MSI11: OKAY
> MSI12: OKAY
> MSI13: OKAY
> MSI14: OKAY
> MSI15: OKAY
> MSI16: OKAY
> MSI17: NOT OKAY
> MSI18: NOT OKAY
> MSI19: NOT OKAY
> MSI20: NOT OKAY
> MSI21: NOT OKAY
> MSI22: NOT OKAY
> MSI23: NOT OKAY
> MSI24: NOT OKAY
> MSI25: NOT OKAY
> MSI26: NOT OKAY
> MSI27: NOT OKAY
> MSI28: NOT OKAY
> MSI29: NOT OKAY
> MSI30: NOT OKAY
> MSI31: NOT OKAY
> MSI32: NOT OKAY
>
> Read Tests
>
> READ ( 1 bytes): OKAY
> READ ( 1024 bytes): OKAY
> READ ( 1025 bytes): OKAY
> READ (1024000 bytes): OKAY
> READ (1024001 bytes): OKAY
>
> Write Tests
>
> WRITE ( 1 bytes): OKAY
> WRITE ( 1024 bytes): OKAY
> WRITE ( 1025 bytes): OKAY
> WRITE (1024000 bytes): OKAY
> WRITE (1024001 bytes): OKAY
>
> Copy Tests
>
> COPY ( 1 bytes): OKAY
> COPY ( 1024 bytes): OKAY
> COPY ( 1025 bytes): OKAY
> COPY (1024000 bytes): OKAY
> COPY (1024001 bytes): OKAY
>
> Kishon Vijay Abraham I (37):
> PCI: dwc: dra7xx: Group all host related setup in add_pcie_port
> PCI: dwc: designware: Add new *ops* for cpu addr fixup
> PCI: dwc: dra7xx: Populate cpu_addr_fixup ops
> PCI: dwc: designware: Move the register defines to designware header
> file
> PCI: dwc: Add platform_set_drvdata
> PCI: dwc: Rename cfg_read/cfg_write to read/write
> PCI: dwc: designware: Get device pointer at the start of
> dw_pcie_host_init
> PCI: dwc: Split *struct pcie_port* into host only and core structures
> PCI: dwc: designware: Parse *num-lanes* property in dw_pcie_setup_rc
> PCI: dwc: designware: Fix style errors in pcie-designware.c
> PCI: dwc: Split pcie-designware.c into host and core files
> PCI: dwc: Create a new config symbol to enable pci dwc host
> PCI: dwc: Remove dependency of designware to CONFIG_PCI
> PCI: endpoint: Add EP core layer to enable EP controller and EP
> functions
> Documentation: PCI: Guide to use PCI Endpoint Core Layer
> PCI: endpoint: Introduce configfs entry for configuring EP functions
> Documentation: PCI: Guide to use pci endpoint configfs
> Documentation: PCI: Add specification for the *pci test* function
> device
> PCI: endpoint: functions: Add an EP function to test PCI
> Documentation: PCI: Add binding documentation for pci-test endpoint
> function
> PCI: dwc: Modify dbi accessors to take dbi_base as argument
> PCI: dwc: Modify dbi accessors to access data of 4/2/1 bytes
> PCI: dwc: Add *ops* to start and stop pcie link
> PCI: dwc: designware: Add EP mode support
> dt-bindings: PCI: Add dt bindings for pci designware EP mode
> PCI: dwc: dra7xx: Facilitate wrapper and msi interrupts to be enabled
> independently
> PCI: dwc: dra7xx: Add EP mode support
> dt-bindings: PCI: dra7xx: Add dt bindings for pci dra7xx EP mode
> PCI: dwc: dra7xx: Workaround for errata id i870
> dt-bindings: PCI: dra7xx: Add dt bindings to enable legacy mode
> misc: Add host side pci driver for pci test function device
> Documentation: misc-devices: Add Documentation for pci-endpoint-test
> driver
> tools: PCI: Add a userspace tool to test PCI endpoint
> tools: PCI: Add sample test script to invoke pcitest
> MAINTAINERS: add PCI EP maintainer
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to
> SW_WKUP
> ARM: dts: DRA7: Add pcie1 dt node for EP mode
>
> Documentation/PCI/00-INDEX | 8 +
> .../PCI/endpoint/function/binding/pci-test.txt | 17 +
> Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 84 ++
> Documentation/PCI/endpoint/pci-endpoint.txt | 190 +++++
> Documentation/PCI/endpoint/pci-test-function.txt | 66 ++
> .../devicetree/bindings/pci/designware-pcie.txt | 26 +-
> Documentation/devicetree/bindings/pci/ti-pci.txt | 41 +-
> Documentation/misc-devices/pci-endpoint-test.txt | 35 +
> MAINTAINERS | 9 +
> arch/arm/boot/dts/am572x-idk.dts | 7 +-
> arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 7 +-
> arch/arm/boot/dts/dra7-evm.dts | 4 +
> arch/arm/boot/dts/dra7.dtsi | 22 +-
> arch/arm/boot/dts/dra72-evm-common.dtsi | 4 +
> arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
> drivers/Makefile | 5 +
> drivers/misc/Kconfig | 7 +
> drivers/misc/Makefile | 1 +
> drivers/misc/pci_endpoint_test.c | 533 ++++++++++++
> drivers/pci/Kconfig | 1 +
> drivers/pci/Makefile | 3 -
> drivers/pci/dwc/Kconfig | 73 +-
> drivers/pci/dwc/Makefile | 6 +-
> drivers/pci/dwc/pci-dra7xx.c | 372 +++++++--
> drivers/pci/dwc/pci-exynos.c | 83 +-
> drivers/pci/dwc/pci-imx6.c | 142 ++--
> drivers/pci/dwc/pci-keystone-dw.c | 91 +-
> drivers/pci/dwc/pci-keystone.c | 56 +-
> drivers/pci/dwc/pci-keystone.h | 4 +-
> drivers/pci/dwc/pci-layerscape.c | 93 ++-
> drivers/pci/dwc/pcie-armada8k.c | 92 ++-
> drivers/pci/dwc/pcie-artpec6.c | 51 +-
> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++
> drivers/pci/dwc/pcie-designware-host.c | 620 ++++++++++++++
> drivers/pci/dwc/pcie-designware-plat.c | 29 +-
> drivers/pci/dwc/pcie-designware.c | 868 ++++----------------
> drivers/pci/dwc/pcie-designware.h | 254 +++++-
> drivers/pci/dwc/pcie-hisi.c | 60 +-
> drivers/pci/dwc/pcie-qcom.c | 72 +-
> drivers/pci/dwc/pcie-spear13xx.c | 85 +-
> drivers/pci/endpoint/Kconfig | 25 +
> drivers/pci/endpoint/Makefile | 7 +
> drivers/pci/endpoint/functions/Kconfig | 12 +
> drivers/pci/endpoint/functions/Makefile | 5 +
> drivers/pci/endpoint/functions/pci-epf-test.c | 513 ++++++++++++
> drivers/pci/endpoint/pci-ep-cfs.c | 427 ++++++++++
> drivers/pci/endpoint/pci-epc-core.c | 548 ++++++++++++
> drivers/pci/endpoint/pci-epc-mem.c | 143 ++++
> drivers/pci/endpoint/pci-epf-core.c | 347 ++++++++
> include/linux/mod_devicetable.h | 10 +
> include/linux/pci-epc.h | 141 ++++
> include/linux/pci-epf.h | 160 ++++
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/pcitest.h | 19 +
> tools/pci/pcitest.c | 186 +++++
> tools/pci/pcitest.sh | 56 ++
> 56 files changed, 5880 insertions(+), 1185 deletions(-)
> create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt
> create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
> create mode 100644 drivers/misc/pci_endpoint_test.c
> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
> create mode 100644 drivers/pci/dwc/pcie-designware-host.c
> create mode 100644 drivers/pci/endpoint/Kconfig
> create mode 100644 drivers/pci/endpoint/Makefile
> create mode 100644 drivers/pci/endpoint/functions/Kconfig
> create mode 100644 drivers/pci/endpoint/functions/Makefile
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
> create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
> create mode 100644 drivers/pci/endpoint/pci-epc-core.c
> create mode 100644 drivers/pci/endpoint/pci-epc-mem.c
> create mode 100644 drivers/pci/endpoint/pci-epf-core.c
> create mode 100644 include/linux/pci-epc.h
> create mode 100644 include/linux/pci-epf.h
> create mode 100644 include/uapi/linux/pcitest.h
> create mode 100644 tools/pci/pcitest.c
> create mode 100644 tools/pci/pcitest.sh
>
More information about the linux-arm-kernel
mailing list