[PATCH for-4.11 1/2] Revert "phy: Add USB3 PHY support for Broadcom NSP SoC"
Rafał Miłecki
zajec5 at gmail.com
Wed Feb 8 15:30:22 PST 2017
From: Rafał Miłecki <rafal at milecki.pl>
This reverts commit d7bc1a7d41bf ("phy: Add USB3 PHY support for
Broadcom NSP SoC") as we already have driver for this PHY (shared by NS
and NSP). It was added in commit e5666281d9ea ("phy: bcm-ns-usb3: new
driver for USB 3.0 PHY on Northstar").
Instead of adding separated driver & duplicating code we should work on
improving existing (old) one. Thanks to work done by Broadcom we know
there is MDIO bus we weren't aware of & we know register names which
makes initialization more clear. This is very valuable info and we
should work on using it in existing driver afterwards.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
drivers/phy/Kconfig | 8 --
drivers/phy/Makefile | 1 -
drivers/phy/phy-bcm-nsp-usb3.c | 177 -----------------------------------------
3 files changed, 186 deletions(-)
delete mode 100644 drivers/phy/phy-bcm-nsp-usb3.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index bb5cf6f49b06..c49a914d6409 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -502,12 +502,4 @@ config PHY_MESON8B_USB2
and GXBB SoCs.
If unsure, say N.
-config PHY_NSP_USB3
- tristate "Broadcom NorthStar plus USB3 PHY driver"
- depends on OF && (ARCH_BCM_NSP || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_NSP
- help
- Enable this to support the Broadcom Northstar plus USB3 PHY.
- If unsure, say N.
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9f008004f75d..0e4259473d28 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -61,4 +61,3 @@ obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
-obj-$(CONFIG_PHY_NSP_USB3) += phy-bcm-nsp-usb3.o
diff --git a/drivers/phy/phy-bcm-nsp-usb3.c b/drivers/phy/phy-bcm-nsp-usb3.c
deleted file mode 100644
index 49024eaa5545..000000000000
--- a/drivers/phy/phy-bcm-nsp-usb3.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mdio.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/phy/phy.h>
-#include <linux/regmap.h>
-
-#define NSP_USB3_RST_CTRL_OFFSET 0x3f8
-
-/* mdio reg access */
-#define NSP_USB3_PHY_BASE_ADDR_REG 0x1f
-
-#define NSP_USB3_PHY_PLL30_BLOCK 0x8000
-#define NSP_USB3_PLL_CONTROL 0x01
-#define NSP_USB3_PLLA_CONTROL0 0x0a
-#define NSP_USB3_PLLA_CONTROL1 0x0b
-
-#define NSP_USB3_PHY_TX_PMD_BLOCK 0x8040
-#define NSP_USB3_TX_PMD_CONTROL1 0x01
-
-#define NSP_USB3_PHY_PIPE_BLOCK 0x8060
-#define NSP_USB3_LFPS_CMP 0x02
-#define NSP_USB3_LFPS_DEGLITCH 0x03
-
-struct nsp_usb3_phy {
- struct regmap *usb3_ctrl;
- struct phy *phy;
- struct mdio_device *mdiodev;
-};
-
-static int nsp_usb3_phy_init(struct phy *phy)
-{
- struct nsp_usb3_phy *iphy = phy_get_drvdata(phy);
- struct mii_bus *bus = iphy->mdiodev->bus;
- int addr = iphy->mdiodev->addr;
- u32 data;
- int rc;
-
- rc = regmap_read(iphy->usb3_ctrl, 0, &data);
- if (rc)
- return rc;
- data |= 1;
- rc = regmap_write(iphy->usb3_ctrl, 0, data);
- if (rc)
- return rc;
-
- rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 1);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
- NSP_USB3_PHY_PLL30_BLOCK);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x1000);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL0, 0x6400);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0xc000);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0x8000);
- if (rc)
- return rc;
-
- rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 0);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x9000);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
- NSP_USB3_PHY_PIPE_BLOCK);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_CMP, 0xf30d);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_DEGLITCH, 0x6302);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
- NSP_USB3_PHY_TX_PMD_BLOCK);
- if (rc)
- return rc;
-
- rc = mdiobus_write(bus, addr, NSP_USB3_TX_PMD_CONTROL1, 0x1003);
-
- return rc;
-}
-
-static struct phy_ops nsp_usb3_phy_ops = {
- .init = nsp_usb3_phy_init,
- .owner = THIS_MODULE,
-};
-
-static int nsp_usb3_phy_probe(struct mdio_device *mdiodev)
-{
- struct device *dev = &mdiodev->dev;
- struct phy_provider *provider;
- struct nsp_usb3_phy *iphy;
-
- iphy = devm_kzalloc(dev, sizeof(*iphy), GFP_KERNEL);
- if (!iphy)
- return -ENOMEM;
- iphy->mdiodev = mdiodev;
-
- iphy->usb3_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
- "usb3-ctrl-syscon");
- if (IS_ERR(iphy->usb3_ctrl))
- return PTR_ERR(iphy->usb3_ctrl);
-
- iphy->phy = devm_phy_create(dev, dev->of_node, &nsp_usb3_phy_ops);
- if (IS_ERR(iphy->phy)) {
- dev_err(dev, "failed to create PHY\n");
- return PTR_ERR(iphy->phy);
- }
-
- phy_set_drvdata(iphy->phy, iphy);
-
- provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- if (IS_ERR(provider)) {
- dev_err(dev, "could not register PHY provider\n");
- return PTR_ERR(provider);
- }
-
- return 0;
-}
-
-static const struct of_device_id nsp_usb3_phy_of_match[] = {
- {.compatible = "brcm,nsp-usb3-phy",},
- { /* sentinel */ }
-};
-
-static struct mdio_driver nsp_usb3_phy_driver = {
- .mdiodrv = {
- .driver = {
- .name = "nsp-usb3-phy",
- .of_match_table = nsp_usb3_phy_of_match,
- },
- },
- .probe = nsp_usb3_phy_probe,
-};
-
-mdio_module_driver(nsp_usb3_phy_driver);
-
-MODULE_DESCRIPTION("Broadcom NSP USB3 PHY driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy at broadcom.com");
--
2.11.0
More information about the linux-arm-kernel
mailing list