[PATCH v7 2/4] dmaengine: Forward slave device pointer to of_xlate callback

[Vinod Koul]

On Thu, Feb 09, 2017 at 10:22:38AM +0100, Marek Szyprowski wrote:
> Hi Vinod,
> 
> On 2017-02-09 05:11, Vinod Koul wrote:
> >On Thu, Jan 26, 2017 at 03:43:05PM +0100, Marek Szyprowski wrote:
> >>On 2017-01-25 14:12, Lars-Peter Clausen wrote:
> >>>On 01/25/2017 11:28 AM, Marek Szyprowski wrote:
> >>>>Add pointer to slave device to of_dma_xlate to let DMA engine driver
> >>>>to know which slave device is using given DMA channel. This will be
> >>>>later used to implement non-irq-safe runtime PM for DMA engine driver.
> >>>of_dma_xlate() is used to translate from a OF phandle and a specifier to a
> >>>DMA channel. On one hand this does not necessarily mean that the channel is
> >>>actually going to be used by the slave that called the xlate function.
> >>>Modifying the driver state when a lookup of the channel is done is a
> >>>layering violation. And this approach is also missing a way to disassociate
> >>>a slave from a DMA channel, e.g. when it is no longer used.
> >>>
> >>>On the other hand there are other mechanisms to translate between some kind
> >>>of firmware handle to a DMA channel which are completely ignored here.
> >>>
> >>>So this approach does not work. This is something that needs to be done at
> >>>the dmaengine level, not a the firmware resource translation level. And it
> >>>needs a matching method that is called when the channel is disassociated
> >>>from a device, when the device no longer uses the DMA channel.
> >>
> >>Frankly I agree that of_dma_xlate() should only return the requested channel
> >>to the dmaengine core and do not do any modification in the the
> >>driver state.
> >True..
> >
> >>However the current dma engine design and implementation breaks this rule.
> >>Please check the drivers - how do they implement of_xlate callback. They
> >>usually call dma_get_any_slave_channel, dma_get_slave_channel or
> >>__dma_request_channel there, which in turn calls dma_chan_get, which then
> >>calls back to device_alloc_chan_resources callback. Some of the drivers also
> >>do a hardware configuration or other resource allocation in of_xlate.
> >>This is a bit messy design and leave no place in the core to set
> >>slave device
> >>before device_alloc_chan_resources callback, where one would expect to have
> >>it already set.
> >We shouldn't be doing much at this stage. We operate on a channel, so the
> >channel is returned to the client. We need to do these HW configurations
> >when the channel has to be prepred for a txn.
> 
> IMHO, any HW configurations should be done in alloc_chan_resources
> callback and
> it would be best if a pointer of slave device will come as a
> parameter to it.

HW configuration is dependent upon the parameters passed, which are not part
of alloc_chan_resources(). Consider it as kind of open() to get a handle for
dmaengine

> 
> >>The best place to add new calls to the dmaengine drivers to set slave device
> >>would be just before device_alloc_chan_resources(), what in turn means that
> >>the current dmaengine core should do in dma_chan_get(). This would
> >>require to
> >>forward the slave device pointer via even more layers including the of_xlate
> >>callback too. IMHO this is not worth the effort.
> >>
> >>DMA engine core and API definitely needs some cleanup. During such cleanup
> >>the slave device pointer might be moved out of xlate into separate callback
> >>when the core gets ready for such operation.
> >Yes agreed on that, plus the runtime handling needs to be built in, right
> >now the APIs dont work well with it, we disucssed these during the KS and
> >this goes without saying, patches are welcome :)
> 
> Okay, so what is the conclusion? Do you want me to do the whole
> rework of dma
> engine core to get this runtime pm patchset for pl330 merged??? Is there any
> roadmap for this rework prepared, so I can at least take a look at
> the amount
> of work needed to be done?
> 
> I'm rather new to dma engine framework and I only wanted to fix pl330 driver
> not to block turning off the power domain on Exynos5422/5433 SoCs.
> 
> I can also check again if there is any other way to find the slave device in
> alloc_chan_resources, like for example scanning the device tree for
> phandles,
> to avoid changing dmaengine core as this turned out to be too problematic
> before one will do the proper dma engine core rework.

There are few things we need to do for making APIs cleaner.

We have a mini discussion during KS/Plumbers, Here are the notes
http://www.spinics.net/lists/dmaengine/msg11570.html

I don't want to block your series for this, I will take a look at v8, first
thing in morning..

Thanks
-- 
~Vinod