[PATCH v2] reset: Add i.MX7 SRC reset driver
Philipp Zabel
p.zabel at pengutronix.de
Mon Feb 13 08:50:43 PST 2017
Hi Andrey,
thank you for the driver, I have a few comments below.
On Mon, 2017-02-13 at 07:33 -0800, Andrey Smirnov wrote:
> This driver exposes various reset faculties, impelented by System Reset
s/impelented/implemented/
> Controller IP block, as a reset driver. Currently only PCIE related
> reset lines are implemented.
>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: devicetree at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
>
> Changes since v1 (see [v1]):
>
> - Various small DT bindings description fixes as per feedback
> from Rob Herring
>
>
> [v1] https://lkml.org/lkml/2017/2/6/554
>
> .../devicetree/bindings/reset/fsl,imx7-src.txt | 47 +++++++
> drivers/reset/Kconfig | 8 ++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-imx7.c | 149 +++++++++++++++++++++
> include/dt-bindings/reset/imx7-reset.h | 28 ++++
> 5 files changed, 233 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> create mode 100644 drivers/reset/reset-imx7.c
> create mode 100644 include/dt-bindings/reset/imx7-reset.h
>
> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> new file mode 100644
> index 0000000..c38f7f0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> @@ -0,0 +1,47 @@
> +Freescale i.MX7 System Reset Controller
> +======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7-src", "syscon"
> +- reg: should be register base and length as documented in the
> + datasheet
> +- interrupts: Should contain SRC interrupt
> +- #reset-cells: 1, see below
> +
> +example:
> +
> +src: reset-controller at 30390000 {
> + compatible = "fsl,imx7d-src", "syscon";
> + reg = <0x30390000 0x2000>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <1>;
> +};
> +
> +
> +Specifying reset lines connected to IP modules
> +==============================================
> +
> +The system reset controller can be used to reset various set of
> +peripherals. Device nodes that need access to reset lines should
> +specify them as a reset phandle in their corresponding node as
> +specified in reset.txt.
> +
> +Example:
> +
> + pcie: pcie at 33800000 {
> +
> + ...
> +
> + resets = <&src IMX7_RESET_PCIEPHY>,
> + <&src IMX7_RESET_PCIE_CTRL_APPS>;
> + reset-names = "pciephy", "apps";
> +
> + ...
> + };
> +
> +
> +For list of all valid reset indicies see
> +<dt-bindings/reset/imx7-reset.h>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 172dc96..664a88b 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -92,6 +92,14 @@ config RESET_ZYNQ
> help
> This enables the reset controller driver for Xilinx Zynq SoCs.
>
> +config RESET_IMX7
> + bool "i.MX7 Reset Driver"
> + depends on SOC_IMX7D || COMPILE_TEST
> + select MFD_SYSCON
> + default SOC_IMX7D
> + help
> + This enables the reset controller driver for i.MX7 SoCs.
> +
Alphabetical order, please.
> source "drivers/reset/sti/Kconfig"
> source "drivers/reset/hisilicon/Kconfig"
> source "drivers/reset/tegra/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 13b346e..417c9d0 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
> obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
> obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
> +obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
See above, those are also in alphabetical order.
> diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
> new file mode 100644
> index 0000000..6d90e57
> --- /dev/null
> +++ b/drivers/reset/reset-imx7.c
> @@ -0,0 +1,149 @@
> +/*
> + * Copyright (c) 2017, Impinj, Inc.
> + *
> + * i.MX7 System Reset Controller (SRC) driver
> + *
> + * Author: Andrey Smirnov <andrew.smirnov at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
I think this is not be necessary because register access is done via
regmap. Please cull unnecessary headers.
> +#include <linux/init.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +#include <dt-bindings/reset/imx7-reset.h>
> +
> +struct imx7_src {
> + struct reset_controller_dev rcdev;
> + struct device *dev;
> + struct regmap *regmap;
> +};
> +
> +enum imx7_src_registers {
> + SRC_PCIEPHY_RCR = 0x002c,
> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST = BIT(1),
What about the others resets? There's at least HSICPHY, MIPIPHY and
USBOPHY registers before the PCIEPHY register.
> + SRC_PCIEPHY_RCR_PCIEPHY_BTN = BIT(2),
> + SRC_PCIEPHY_RCR_PCIE_CTRL_APPS_EN = BIT(6),
Are those really resets? At least the PCIE_CTRL_APPS_EN has a bit called
PCIE_CTRL_APPS_RST right next to it, so this warrants some explanation.
> +};
> +
> +static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct imx7_src, rcdev);
> +}
> +
> +static int imx7_reset_assert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct imx7_src *imx7src = to_imx7_src(rcdev);
> +
> + switch (id) {
> + case IMX7_RESET_PCIE_CTRL_APPS:
> + regmap_update_bits(imx7src->regmap,
> + SRC_PCIEPHY_RCR,
> + SRC_PCIEPHY_RCR_PCIE_CTRL_APPS_EN, 0);
> + return 0;
> +
> + case IMX7_RESET_PCIEPHY:
> + regmap_update_bits(imx7src->regmap,
> + SRC_PCIEPHY_RCR,
> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST,
> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST);
> + regmap_update_bits(imx7src->regmap,
> + SRC_PCIEPHY_RCR,
> + SRC_PCIEPHY_RCR_PCIEPHY_BTN,
> + SRC_PCIEPHY_RCR_PCIEPHY_BTN);
What is the PCIE PHY button, and why does it have to be set with the
reset bit?
> + return 0;
> + default:
> + dev_err(imx7src->dev, "Unknown reset ID %lu\n", id);
> + break;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + struct imx7_src *imx7src = to_imx7_src(rcdev);
> +
> + switch (id) {
> + case IMX7_RESET_PCIE_CTRL_APPS:
> + regmap_update_bits(imx7src->regmap,
> + SRC_PCIEPHY_RCR,
> + SRC_PCIEPHY_RCR_PCIE_CTRL_APPS_EN,
> + SRC_PCIEPHY_RCR_PCIE_CTRL_APPS_EN);
> + return 0;
> +
> + case IMX7_RESET_PCIEPHY:
> + /* wait for more than 10us to release phy g_rst and btnrst */
> + udelay(10);
> + regmap_update_bits(imx7src->regmap,
> + SRC_PCIEPHY_RCR,
> + SRC_PCIEPHY_RCR_PCIEPHY_G_RST, 0);
> + regmap_update_bits(imx7src->regmap,
> + SRC_PCIEPHY_RCR,
> + SRC_PCIEPHY_RCR_PCIEPHY_BTN, 0);
> + return 0;
> + default:
> + dev_err(imx7src->dev, "Unknown reset ID %lu\n", id);
> + break;
> + };
> +
> + return -EINVAL;
> +}
> +
> +static const struct reset_control_ops imx7_reset_ops = {
> + .assert = imx7_reset_assert,
> + .deassert = imx7_reset_deassert,
> +};
> +
> +static int imx7_reset_probe(struct platform_device *pdev)
> +{
> + struct imx7_src *imx7src;
> + struct device *dev = &pdev->dev;
> +
> + imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
> + if (!imx7src)
> + return -ENOMEM;
> +
> + imx7src->dev = dev;
> + imx7src->regmap = syscon_node_to_regmap(dev->of_node);
> + if (IS_ERR(imx7src->regmap)) {
> + dev_err(dev, "Unable to get imx7-src regmap");
> + return PTR_ERR(imx7src->regmap);
> + }
You could use regmap_attach_dev to attach the device to the regmap. This
would improve error messages, regmap debugfs structure, and make
imx7src->dev unnecessary.
> +
> + imx7src->rcdev.owner = THIS_MODULE;
> + imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
> + imx7src->rcdev.ops = &imx7_reset_ops;
> + imx7src->rcdev.of_node = dev->of_node;
> +
> + return devm_reset_controller_register(dev, &imx7src->rcdev);
> +}
> +
> +static const struct of_device_id imx7_reset_dt_ids[] = {
> + { .compatible = "fsl,imx7d-src", },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver imx7_reset_driver = {
> + .probe = imx7_reset_probe,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = imx7_reset_dt_ids,
> + },
> +};
> +builtin_platform_driver(imx7_reset_driver);
> diff --git a/include/dt-bindings/reset/imx7-reset.h b/include/dt-bindings/reset/imx7-reset.h
> new file mode 100644
> index 0000000..e20f2db
> --- /dev/null
> +++ b/include/dt-bindings/reset/imx7-reset.h
> @@ -0,0 +1,28 @@
> +/*
> + * Copyright (C) 2017 Impinj, Inc.
> + *
> + * Author: Andrey Smirnov <andrew.smirnov at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef DT_BINDING_RESET_IMX7_H
> +#define DT_BINDING_RESET_IMX7_H
> +
> +#define IMX7_RESET_PCIE_CTRL_APPS 0
> +#define IMX7_RESET_PCIEPHY 1
It would expect these to be numbered in the order they appear in the
register map, not starting from the end. Could you add all available
peripheral resets to this list, in the correct order?
> +#define IMX7_RESET_NUM 2
> +
> +#endif
> +
regards
Philipp
More information about the linux-arm-kernel
mailing list