[PATCH v4 3/9] ARM: dts: imx28: add alternative muxing for mmc2_sck_cfg

Michael Heimpold michael.heimpold at i2se.com
Wed Feb 8 23:42:43 PST 2017


Signed-off-by: Michael Heimpold <michael.heimpold at i2se.com>
Cc: Stefan Wahren <stefan.wahren at i2se.com>
Acked-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm/boot/dts/imx28.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 857ca37..5c65fa1 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -613,6 +613,15 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc2_sck_cfg_b: mmc2-sck-cfg at 1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				i2c0_pins_a: i2c0 at 0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-- 
2.6.1




More information about the linux-arm-kernel mailing list