[PATCH v4 2/9] ARM: dts: imx28: rename mmc2_sck_cfg

[Michael Heimpold]

This patch renames mmc2_sck_cfg in order to prepare for an alternative
muxing setup.

Signed-off-by: Michael Heimpold <michael.heimpold at i2se.com>
Cc: Stefan Wahren <stefan.wahren at i2se.com>
Acked-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm/boot/dts/imx28-m28cu3.dts | 2 +-
 arch/arm/boot/dts/imx28.dtsi       | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 2df63be..bb53294 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -57,7 +57,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc2_4bit_pins_a
 					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg>;
+					     &mmc2_sck_cfg_a>;
 				bus-width = <4>;
 				vmmc-supply = <&reg_vddio_sd1>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bc5cf41..857ca37 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -604,7 +604,8 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				mmc2_sck_cfg: mmc2-sck-cfg {
+				mmc2_sck_cfg_a: mmc2-sck-cfg at 0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
-- 
2.6.1