[PATCH 03/11] [media] s5p-mfc: Use min scratch buffer size
Smitha T Murthy
smitha.t at samsung.com
Mon Feb 6 00:38:38 PST 2017
On Thu, 2017-02-02 at 08:16 +0100, Andrzej Hajda wrote:
> On 18.01.2017 11:02, Smitha T Murthy wrote:
> > After MFC v8.0, mfc f/w lets the driver know how much scratch buffer
> > size is required for decoder. If mfc f/w has the functionality,
> > E_MIN_SCRATCH_BUFFER_SIZE, driver can know how much scratch buffer size
> > is required for encoder too.
>
> Subject says "Use min scratch buffer size" but it is already used.
> Maybe it should be changed to sth like:
> Use min scratch buffer size provided by F/W
>
Yes it will be better if I change the commit message as "Use min scratch buffer size provided by F/W".
> >
> > Signed-off-by: Smitha T Murthy <smitha.t at samsung.com>
> > ---
> > drivers/media/platform/s5p-mfc/regs-mfc-v8.h | 2 +
> > drivers/media/platform/s5p-mfc/s5p_mfc.c | 2 +
> > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 1 +
> > drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 7 ++
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr.h | 4 +
> > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 68 +++++++++++++++++------
> > 6 files changed, 67 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/media/platform/s5p-mfc/regs-mfc-v8.h b/drivers/media/platform/s5p-mfc/regs-mfc-v8.h
> > index 4d1c375..2cd396b 100644
> > --- a/drivers/media/platform/s5p-mfc/regs-mfc-v8.h
> > +++ b/drivers/media/platform/s5p-mfc/regs-mfc-v8.h
> > @@ -17,6 +17,7 @@
> >
> > /* Additional registers for v8 */
> > #define S5P_FIMV_D_MVC_NUM_VIEWS_V8 0xf104
> > +#define S5P_FIMV_D_MIN_SCRATCH_BUFFER_SIZE_V8 0xf108
> > #define S5P_FIMV_D_FIRST_PLANE_DPB_SIZE_V8 0xf144
> > #define S5P_FIMV_D_SECOND_PLANE_DPB_SIZE_V8 0xf148
> > #define S5P_FIMV_D_MV_BUFFER_SIZE_V8 0xf150
> > @@ -84,6 +85,7 @@
> >
> > #define S5P_FIMV_E_VBV_BUFFER_SIZE_V8 0xf78c
> > #define S5P_FIMV_E_VBV_INIT_DELAY_V8 0xf790
> > +#define S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8 0xf894
> >
> > #define S5P_FIMV_E_ASPECT_RATIO_V8 0xfb4c
> > #define S5P_FIMV_E_EXTENDED_SAR_V8 0xfb50
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> > index a043cce..b014038 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> > @@ -520,6 +520,8 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
> > dev);
> > ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count,
> > dev);
> > + ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
> > + get_min_scratch_buf_size, dev);
> > if (ctx->img_width == 0 || ctx->img_height == 0)
> > ctx->state = MFCINST_ERROR;
> > else
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > index 1941c63..998e24b 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
> > @@ -724,6 +724,7 @@ struct mfc_control {
> > #define IS_MFCV7_PLUS(dev) (dev->variant->version >= 0x70 ? 1 : 0)
> > #define IS_MFCV8_PLUS(dev) (dev->variant->version >= 0x80 ? 1 : 0)
> > #define IS_MFCV10(dev) (dev->variant->version >= 0xA0 ? 1 : 0)
> > +#define FW_HAS_E_MIN_SCRATCH_BUF(dev) (IS_MFCV10(dev))
> >
> > #define MFC_V5_BIT BIT(0)
> > #define MFC_V6_BIT BIT(1)
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
> > index 9042378..ef15831 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
> > @@ -818,6 +818,13 @@ static int enc_post_seq_start(struct s5p_mfc_ctx *ctx)
> > get_enc_dpb_count, dev);
> > if (ctx->pb_count < enc_pb_count)
> > ctx->pb_count = enc_pb_count;
> > + if (FW_HAS_E_MIN_SCRATCH_BUF(dev)) {
> > + ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
> > + get_e_min_scratch_buf_size, dev);
> > + ctx->scratch_buf_size = ALIGN(ctx->scratch_buf_size,
> > + S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
>
> Do we really need to align it here? Does firmware return unaligned value?
> Even then the alignment (if necessary) should be moved rather to
> get_e_min_scratch_buf_size.
>
No we do not need alignment on the values returned by firmware, they
would be aligned as per the UM and returned to driver. I will change it
in the next version.
> > + ctx->bank1.size += ctx->scratch_buf_size;
> > + }
> > ctx->state = MFCINST_HEAD_PRODUCED;
> > }
> >
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h
> > index b6ac417..6478f70 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr.h
> > @@ -169,6 +169,7 @@ struct s5p_mfc_regs {
> > void __iomem *d_decoded_third_addr;/* only v7 */
> > void __iomem *d_used_dpb_flag_upper;/* v7 and v8 */
> > void __iomem *d_used_dpb_flag_lower;/* v7 and v8 */
> > + void __iomem *d_min_scratch_buffer_size; /* v10 */
> >
> > /* encoder registers */
> > void __iomem *e_frame_width;
> > @@ -268,6 +269,7 @@ struct s5p_mfc_regs {
> > void __iomem *e_vp8_hierarchical_qp_layer0;/* v7 and v8 */
> > void __iomem *e_vp8_hierarchical_qp_layer1;/* v7 and v8 */
> > void __iomem *e_vp8_hierarchical_qp_layer2;/* v7 and v8 */
> > + void __iomem *e_min_scratch_buffer_size; /* v10 */
> > };
> >
> > struct s5p_mfc_hw_ops {
> > @@ -311,6 +313,8 @@ struct s5p_mfc_hw_ops {
> > unsigned int (*get_pic_type_bot)(struct s5p_mfc_ctx *ctx);
> > unsigned int (*get_crop_info_h)(struct s5p_mfc_ctx *ctx);
> > unsigned int (*get_crop_info_v)(struct s5p_mfc_ctx *ctx);
> > + int (*get_min_scratch_buf_size)(struct s5p_mfc_dev *dev);
> > + int (*get_e_min_scratch_buf_size)(struct s5p_mfc_dev *dev);
> > };
> >
> > void s5p_mfc_init_hw_ops(struct s5p_mfc_dev *dev);
> > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > index 63dce5a..faceee6 100644
> > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c
> > @@ -110,7 +110,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > switch (ctx->codec_mode) {
> > case S5P_MFC_CODEC_H264_DEC:
> > case S5P_MFC_CODEC_H264_MVC_DEC:
> > - if (IS_MFCV8_PLUS(dev))
> > + if (IS_MFCV10(dev))
> > + mfc_debug(2, "Use min scratch buffer size\n");
>
> Here and below you are adding empty case for MFCV10, this is wrong,
> patch subject says "Use min scratch buffer size", but you do nothing here.
> I see it is added in the next patch, probably it should be merged here,
> I will comment it more in the next patch.
>
> Regards
> Andrzej
>
This is an empty case so that MFCv10 can use the minimum scratch buffer
size provided by F/W. This is done in the s5p_mfc_handle_seq_done
function call where ctx->scratch_buf_size is set through the
s5p_mfc_hw_call(dev->mfc_ops, get_min_scratch_buf_size, dev). As for
other MFC versions ctx->scratch_buf_size value is overwritten at this
place by the manual calculations done which is not needed for MFCv10.
Thank you for the review.
Regards,
Smitha
> > + else if (IS_MFCV8_PLUS(dev))
> > ctx->scratch_buf_size =
> > S5P_FIMV_SCRATCH_BUF_SIZE_H264_DEC_V8(
> > mb_width,
> > @@ -127,7 +129,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > (ctx->mv_count * ctx->mv_size);
> > break;
> > case S5P_MFC_CODEC_MPEG4_DEC:
> > - if (IS_MFCV7_PLUS(dev)) {
> > + if (IS_MFCV10(dev))
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + else if (IS_MFCV7_PLUS(dev)) {
> > ctx->scratch_buf_size =
> > S5P_FIMV_SCRATCH_BUF_SIZE_MPEG4_DEC_V7(
> > mb_width,
> > @@ -145,10 +149,14 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > break;
> > case S5P_MFC_CODEC_VC1RCV_DEC:
> > case S5P_MFC_CODEC_VC1_DEC:
> > - ctx->scratch_buf_size =
> > - S5P_FIMV_SCRATCH_BUF_SIZE_VC1_DEC_V6(
> > - mb_width,
> > - mb_height);
> > + if (IS_MFCV10(dev))
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + else
> > + ctx->scratch_buf_size =
> > + S5P_FIMV_SCRATCH_BUF_SIZE_VC1_DEC_V6(
> > + mb_width,
> > + mb_height);
> > +
> > ctx->scratch_buf_size = ALIGN(ctx->scratch_buf_size,
> > S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
> > ctx->bank1.size = ctx->scratch_buf_size;
> > @@ -158,16 +166,21 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > ctx->bank2.size = 0;
> > break;
> > case S5P_MFC_CODEC_H263_DEC:
> > - ctx->scratch_buf_size =
> > - S5P_FIMV_SCRATCH_BUF_SIZE_H263_DEC_V6(
> > - mb_width,
> > - mb_height);
> > + if (IS_MFCV10(dev))
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + else
> > + ctx->scratch_buf_size =
> > + S5P_FIMV_SCRATCH_BUF_SIZE_H263_DEC_V6(
> > + mb_width,
> > + mb_height);
> > ctx->scratch_buf_size = ALIGN(ctx->scratch_buf_size,
> > S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
> > ctx->bank1.size = ctx->scratch_buf_size;
> > break;
> > case S5P_MFC_CODEC_VP8_DEC:
> > - if (IS_MFCV8_PLUS(dev))
> > + if (IS_MFCV10(dev))
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + else if (IS_MFCV8_PLUS(dev))
> > ctx->scratch_buf_size =
> > S5P_FIMV_SCRATCH_BUF_SIZE_VP8_DEC_V8(
> > mb_width,
> > @@ -182,7 +195,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > ctx->bank1.size = ctx->scratch_buf_size;
> > break;
> > case S5P_MFC_CODEC_H264_ENC:
> > - if (IS_MFCV8_PLUS(dev))
> > + if (IS_MFCV10(dev)) {
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + } else if (IS_MFCV8_PLUS(dev))
> > ctx->scratch_buf_size =
> > S5P_FIMV_SCRATCH_BUF_SIZE_H264_ENC_V8(
> > mb_width,
> > @@ -202,10 +217,13 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > break;
> > case S5P_MFC_CODEC_MPEG4_ENC:
> > case S5P_MFC_CODEC_H263_ENC:
> > - ctx->scratch_buf_size =
> > - S5P_FIMV_SCRATCH_BUF_SIZE_MPEG4_ENC_V6(
> > - mb_width,
> > - mb_height);
> > + if (IS_MFCV10(dev)) {
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + } else
> > + ctx->scratch_buf_size =
> > + S5P_FIMV_SCRATCH_BUF_SIZE_MPEG4_ENC_V6(
> > + mb_width,
> > + mb_height);
> > ctx->scratch_buf_size = ALIGN(ctx->scratch_buf_size,
> > S5P_FIMV_SCRATCH_BUFFER_ALIGN_V6);
> > ctx->bank1.size =
> > @@ -215,7 +233,9 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx)
> > ctx->bank2.size = 0;
> > break;
> > case S5P_MFC_CODEC_VP8_ENC:
> > - if (IS_MFCV8_PLUS(dev))
> > + if (IS_MFCV10(dev)) {
> > + mfc_debug(2, "Use min scratch buffer size\n");
> > + } else if (IS_MFCV8_PLUS(dev))
> > ctx->scratch_buf_size =
> > S5P_FIMV_SCRATCH_BUF_SIZE_VP8_ENC_V8(
> > mb_width,
> > @@ -1911,6 +1931,16 @@ static int s5p_mfc_get_mv_count_v6(struct s5p_mfc_dev *dev)
> > return readl(dev->mfc_regs->d_min_num_mv);
> > }
> >
> > +static int s5p_mfc_get_min_scratch_buf_size(struct s5p_mfc_dev *dev)
> > +{
> > + return readl(dev->mfc_regs->d_min_scratch_buffer_size);
> > +}
> > +
> > +static int s5p_mfc_get_e_min_scratch_buf_size(struct s5p_mfc_dev *dev)
> > +{
> > + return readl(dev->mfc_regs->e_min_scratch_buffer_size);
> > +}
> > +
> > static int s5p_mfc_get_inst_no_v6(struct s5p_mfc_dev *dev)
> > {
> > return readl(dev->mfc_regs->ret_instance_id);
> > @@ -2169,6 +2199,7 @@ static unsigned int s5p_mfc_get_crop_info_v_v6(struct s5p_mfc_ctx *ctx)
> > R(d_ret_picture_tag_bot, S5P_FIMV_D_RET_PICTURE_TAG_BOT_V8);
> > R(d_display_crop_info1, S5P_FIMV_D_DISPLAY_CROP_INFO1_V8);
> > R(d_display_crop_info2, S5P_FIMV_D_DISPLAY_CROP_INFO2_V8);
> > + R(d_min_scratch_buffer_size, S5P_FIMV_D_MIN_SCRATCH_BUFFER_SIZE_V8);
> >
> > /* encoder registers */
> > R(e_padding_ctrl, S5P_FIMV_E_PADDING_CTRL_V8);
> > @@ -2184,6 +2215,7 @@ static unsigned int s5p_mfc_get_crop_info_v_v6(struct s5p_mfc_ctx *ctx)
> > R(e_aspect_ratio, S5P_FIMV_E_ASPECT_RATIO_V8);
> > R(e_extended_sar, S5P_FIMV_E_EXTENDED_SAR_V8);
> > R(e_h264_options, S5P_FIMV_E_H264_OPTIONS_V8);
> > + R(e_min_scratch_buffer_size, S5P_FIMV_E_MIN_SCRATCH_BUFFER_SIZE_V8);
> >
> > done:
> > return &mfc_regs;
> > @@ -2232,6 +2264,8 @@ static unsigned int s5p_mfc_get_crop_info_v_v6(struct s5p_mfc_ctx *ctx)
> > .get_pic_type_bot = s5p_mfc_get_pic_type_bot_v6,
> > .get_crop_info_h = s5p_mfc_get_crop_info_h_v6,
> > .get_crop_info_v = s5p_mfc_get_crop_info_v_v6,
> > + .get_min_scratch_buf_size = s5p_mfc_get_min_scratch_buf_size,
> > + .get_e_min_scratch_buf_size = s5p_mfc_get_e_min_scratch_buf_size,
> > };
> >
> > struct s5p_mfc_hw_ops *s5p_mfc_init_hw_ops_v6(void)
>
>
>
More information about the linux-arm-kernel
mailing list