[PATCH 3/4] drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)
Peter Senna Tschudin
peter.senna at collabora.com
Mon Feb 27 05:40:50 PST 2017
On Wed, Feb 01, 2017 at 04:17:21PM +0530, Archit Taneja wrote:
Hi Archit,
> Hi,
>
> Some minor comments:
Thank you for the review!
>
> On 01/28/2017 07:51 PM, Peter Senna Tschudin wrote:
> > The video processing pipeline on the second output on the GE B850v3:
> >
> > Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
> >
> > Each bridge has a dedicated flash containing firmware for supporting the
> > custom design. The result is that in this design neither the STDP4028
> > nor the STDP2690 behave as the stock bridges would. The compatible
> > strings include the suffix "-ge-b850v3-fw" to make it clear that the
> > driver is for the bridges with the firmware which is specific for the GE
> > B850v3.
> >
> > The driver is powerless to control the video processing pipeline, as the
> > two bridges behaves as a single one. The driver is only needed for
> > telling the host about EDID / HPD, and for giving the host powers to ack
> > interrupts.
> >
> > This driver adds one i2c_device for each bridge, but only one
> > drm_bridge. This design allows the creation of a functional connector
> > that is capable of reading EDID from the STDP2690 while handling
> > interrupts on the STDP4028.
> >
> > Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > Cc: Martyn Welch <martyn.welch at collabora.co.uk>
> > Cc: Martin Donnelly <martin.donnelly at ge.com>
> > Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> > Cc: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> > Cc: Philipp Zabel <p.zabel at pengutronix.de>
> > Cc: Rob Herring <robh at kernel.org>
> > Cc: Fabio Estevam <fabio.estevam at nxp.com>
> > Cc: David Airlie <airlied at linux.ie>
> > Cc: Thierry Reding <treding at nvidia.com>
> > Cc: Thierry Reding <thierry.reding at gmail.com>
> > Cc: Archit Taneja <architt at codeaurora.org>
> > Cc: Enric Balletbo <enric.balletbo at collabora.com>
> > Signed-off-by: Peter Senna Tschudin <peter.senna at collabora.com>
> > ---
> > drivers/gpu/drm/bridge/Kconfig | 11 +
> > drivers/gpu/drm/bridge/Makefile | 1 +
> > .../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 408 +++++++++++++++++++++
> > 3 files changed, 420 insertions(+)
> > create mode 100644 drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
> >
> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > index eb8688e..4a937f1 100644
> > --- a/drivers/gpu/drm/bridge/Kconfig
> > +++ b/drivers/gpu/drm/bridge/Kconfig
> > @@ -48,6 +48,17 @@ config DRM_DW_HDMI_I2S_AUDIO
> > Support the I2S Audio interface which is part of the Synopsis
> > Designware HDMI block.
> >
> > +config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
> > + tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
> > + depends on OF
> > + select DRM_KMS_HELPER
> > + select DRM_PANEL
> > + ---help---
> > + This is a driver for the display bridges of
> > + GE B850v3 that convert dual channel LVDS
> > + to DP++. This is used with the i.MX6 imx-ldb
> > + driver. You are likely to say N here.
> > +
> > config DRM_NXP_PTN3460
> > tristate "NXP PTN3460 DP/LVDS bridge"
> > depends on OF
> > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> > index 2e83a785..af0b7cc 100644
> > --- a/drivers/gpu/drm/bridge/Makefile
> > +++ b/drivers/gpu/drm/bridge/Makefile
> > @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
> > obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
> > obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
> > obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
> > +obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
> > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> > obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
> > diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
> > new file mode 100644
> > index 0000000..13de03cf
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
> > @@ -0,0 +1,408 @@
> > +/*
> > + * Driver for MegaChips STDP4028 with GE B850v3 firmware (LVDS-DP)
> > + * Driver for MegaChips STDP2690 with GE B850v3 firmware (DP-DP++)
> > +
> > + * Copyright (c) 2016, Collabora Ltd.
> > + * Copyright (c) 2016, General Electric Company
>
> 2017?
Fixed.
>
> > +
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > +
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> > + * more details.
> > +
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> > +
> > + * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++
> > + * display bridge of the GE B850v3. There are two physical bridges on the video
> > + * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The
> > + * physical bridges are automatically configured by the input video signal, and
> > + * the driver has no access to the video processing pipeline. The driver is
> > + * only needed to read EDID from the STDP2690 and to handle HPD events from the
> > + * STDP4028. The driver communicates with both bridges over i2c. The video
> > + * signal pipeline is as follows:
> > + *
> > + * Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
> > + *
> > + */
> > +
> > +#include <linux/gpio.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <drm/drm_atomic.h>
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_edid.h>
> > +#include <drm/drmP.h>
> > +
> > +#define EDID_EXT_BLOCK_CNT 0x7E
> > +
> > +#define STDP4028_IRQ_OUT_CONF_REG 0x02
> > +#define STDP4028_DPTX_IRQ_EN_REG 0x3C
> > +#define STDP4028_DPTX_IRQ_STS_REG 0x3D
> > +#define STDP4028_DPTX_STS_REG 0x3E
> > +
> > +#define STDP4028_DPTX_DP_IRQ_EN 0x1000
> > +
> > +#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400
> > +#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000
> > +#define STDP4028_DPTX_IRQ_CONFIG \
> > + (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
> > +
> > +#define STDP4028_DPTX_HOTPLUG_STS 0x0200
> > +#define STDP4028_DPTX_LINK_STS 0x1000
> > +#define STDP4028_CON_STATE_CONNECTED \
> > + (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
> > +
> > +#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400
> > +#define STDP4028_DPTX_LINK_CH_STS 0x2000
> > +#define STDP4028_DPTX_IRQ_CLEAR \
> > + (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
> > +
> > +static DEFINE_MUTEX(ge_b850v3_lvds_dev_mutex);
> > +
> > +struct ge_b850v3_lvds {
> > + struct drm_connector connector;
> > + struct drm_bridge bridge;
> > + struct i2c_client *stdp4028_i2c;
> > + struct i2c_client *stdp2690_i2c;
> > + struct edid *edid;
> > +};
> > +
> > +static struct ge_b850v3_lvds *ge_b850v3_lvds_ptr;
> > +
> > +u8 *stdp2690_get_edid(struct i2c_client *client)
> > +{
> > + struct i2c_adapter *adapter = client->adapter;
> > + unsigned char start = 0x00;
> > + unsigned int total_size;
> > + u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
> > +
> > + struct i2c_msg msgs[] = {
> > + {
> > + .addr = client->addr,
> > + .flags = 0,
> > + .len = 1,
> > + .buf = &start,
> > + }, {
> > + .addr = client->addr,
> > + .flags = I2C_M_RD,
> > + .len = EDID_LENGTH,
> > + .buf = block,
> > + }
> > + };
> > +
> > + if (!block)
> > + return NULL;
> > +
> > + if (i2c_transfer(adapter, msgs, 2) != 2) {
> > + DRM_ERROR("Unable to read EDID.\n");
> > + goto err;
> > + }
> > +
> > + if (!drm_edid_block_valid(block, 0, false, NULL)) {
> > + DRM_ERROR("Invalid EDID data\n");
> > + goto err;
> > + }
> > +
> > + total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
> > + if (total_size > EDID_LENGTH) {
> > + kfree(block);
> > + block = kmalloc(total_size, GFP_KERNEL);
> > + if (!block)
> > + return NULL;
> > +
> > + /* Yes, read the entire buffer, and do not skip the first
> > + * EDID_LENGTH bytes.
> > + */
> > + start = 0x00;
> > + msgs[1].len = total_size;
> > + msgs[1].buf = block;
> > +
> > + if (i2c_transfer(adapter, msgs, 2) != 2) {
> > + DRM_ERROR("Unable to read EDID extension blocks.\n");
> > + goto err;
> > + }
> > + if (!drm_edid_block_valid(block, 1, false, NULL)) {
> > + DRM_ERROR("Invalid EDID data\n");
> > + goto err;
> > + }
> > + }
> > +
> > + return block;
> > +
> > +err:
> > + kfree(block);
> > + return NULL;
> > +}
> > +
> > +static int ge_b850v3_lvds_get_modes(struct drm_connector *connector)
> > +{
> > + int num_modes = 0;
> > +
> > + kfree(ge_b850v3_lvds_ptr->edid);
> > + ge_b850v3_lvds_ptr->edid = (struct edid *)
> > + stdp2690_get_edid(ge_b850v3_lvds_ptr->stdp2690_i2c);
> > +
> > + if (ge_b850v3_lvds_ptr->edid) {
> > + drm_mode_connector_update_edid_property(connector,
> > + ge_b850v3_lvds_ptr->edid);
> > + num_modes = drm_add_edid_modes(connector,
> > + ge_b850v3_lvds_ptr->edid);
> > + }
> > +
> > + return num_modes;
> > +}
> > +
> > +
>
> extra blank line here.
Fixed
>
> > +static enum drm_mode_status ge_b850v3_lvds_mode_valid(
> > + struct drm_connector *connector, struct drm_display_mode *mode)
> > +{
> > + return MODE_OK;
> > +}
> > +
> > +static const struct
> > +drm_connector_helper_funcs ge_b850v3_lvds_connector_helper_funcs = {
> > + .get_modes = ge_b850v3_lvds_get_modes,
> > + .mode_valid = ge_b850v3_lvds_mode_valid,
> > +};
> > +
> > +static enum drm_connector_status ge_b850v3_lvds_detect(
> > + struct drm_connector *connector, bool force)
> > +{
> > + s32 link_state;
> > +
> > + link_state = i2c_smbus_read_word_data(ge_b850v3_lvds_ptr->stdp4028_i2c,
> > + STDP4028_DPTX_STS_REG);
> > +
> > + if (link_state == STDP4028_CON_STATE_CONNECTED)
> > + return connector_status_connected;
> > +
> > + if (link_state == 0)
> > + return connector_status_disconnected;
> > +
> > + return connector_status_unknown;
> > +}
> > +
> > +static const struct drm_connector_funcs ge_b850v3_lvds_connector_funcs = {
> > + .dpms = drm_atomic_helper_connector_dpms,
> > + .fill_modes = drm_helper_probe_single_connector_modes,
> > + .detect = ge_b850v3_lvds_detect,
> > + .destroy = drm_connector_cleanup,
> > + .reset = drm_atomic_helper_connector_reset,
> > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > +};
> > +
> > +static irqreturn_t ge_b850v3_lvds_irq_handler(int irq, void *dev_id)
> > +{
> > + i2c_smbus_write_word_data(ge_b850v3_lvds_ptr->stdp4028_i2c,
> > + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
> > +
> > + if (ge_b850v3_lvds_ptr->connector.dev)
> > + drm_kms_helper_hotplug_event(ge_b850v3_lvds_ptr->connector.dev);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int ge_b850v3_lvds_attach(struct drm_bridge *bridge)
> > +{
> > + int ret;
> > +
> > + if (!ge_b850v3_lvds_ptr->stdp2690_i2c ||
> > + !ge_b850v3_lvds_ptr->stdp4028_i2c) {
> > + DRM_ERROR("i2c not properly initialized...");
> > + return -ENODEV;
> > + }
> > +
> > + if (!bridge->encoder) {
> > + DRM_ERROR("Parent encoder object not found");
> > + return -ENODEV;
> > + }
> > +
> > + ge_b850v3_lvds_ptr->connector.polled = DRM_CONNECTOR_POLL_HPD;
> > +
> > + drm_connector_helper_add(&ge_b850v3_lvds_ptr->connector,
> > + &ge_b850v3_lvds_connector_helper_funcs);
> > +
> > + ret = drm_connector_init(bridge->dev, &ge_b850v3_lvds_ptr->connector,
> > + &ge_b850v3_lvds_connector_funcs,
> > + DRM_MODE_CONNECTOR_DisplayPort);
> > + if (ret) {
> > + DRM_ERROR("Failed to initialize connector with drm\n");
> > + return ret;
> > + }
> > +
> > + ret = drm_mode_connector_attach_encoder(&ge_b850v3_lvds_ptr->connector,
> > + bridge->encoder);
> > + if (ret)
> > + return ret;
> > +
> > + /* Configures the bridge to re-enable interrupts after each ack. */
> > + i2c_smbus_write_word_data(ge_b850v3_lvds_ptr->stdp4028_i2c,
> > + STDP4028_IRQ_OUT_CONF_REG, STDP4028_DPTX_DP_IRQ_EN);
> > +
> > + /* Enable interrupts */
> > + i2c_smbus_write_word_data(ge_b850v3_lvds_ptr->stdp4028_i2c,
> > + STDP4028_DPTX_IRQ_EN_REG, STDP4028_DPTX_IRQ_CONFIG);
> > +
> > + return 0;
> > +}
> > +
> > +static void ge_b850v3_lvds_detach(struct drm_bridge *bridge)
> > +{
> > + /* Disable interrupts */
> > + i2c_smbus_write_word_data(ge_b850v3_lvds_ptr->stdp4028_i2c,
> > + STDP4028_DPTX_IRQ_EN_REG, 0);
> > +}
> > +
> > +static const struct drm_bridge_funcs ge_b850v3_lvds_funcs = {
> > + .attach = ge_b850v3_lvds_attach,
> > + .detach = ge_b850v3_lvds_detach,
> > +};
> > +
> > +static int ge_b850v3_lvds_init(struct device *dev)
> > +{
> > + mutex_lock(&ge_b850v3_lvds_dev_mutex);
> > +
> > + if (ge_b850v3_lvds_ptr)
> > + goto success;
> > +
> > + ge_b850v3_lvds_ptr = devm_kzalloc(dev,
> > + sizeof(*ge_b850v3_lvds_ptr), GFP_KERNEL);
> > +
> > + if (!ge_b850v3_lvds_ptr) {
> > + mutex_unlock(&ge_b850v3_lvds_dev_mutex);
> > + return -ENOMEM;
> > + }
> > +
> > + ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
> > + ge_b850v3_lvds_ptr->bridge.of_node = dev->of_node;
> > +
> > + ge_b850v3_lvds_ptr->stdp2690_i2c = NULL;
> > + ge_b850v3_lvds_ptr->stdp4028_i2c = NULL;
> > +
> > + drm_bridge_add(&ge_b850v3_lvds_ptr->bridge);
> > +
> > +success:
> > + mutex_unlock(&ge_b850v3_lvds_dev_mutex);
> > + return 0;
> > +}
> > +
> > +static void ge_b850v3_lvds_remove(void)
> > +{
> > + mutex_lock(&ge_b850v3_lvds_dev_mutex);
> > +
> > + if (!ge_b850v3_lvds_ptr->edid)
> > + goto out;
>
> The check above seems to be used to avoid both the drivers
> removing the bridge in their remove() func. But it's possible
> that ge_b850v3_lvds_ptr->edid is always NULL, i.e, a LVDS panel
> was never connected in the platform, or the EDID read failed for
> some reason.
>
> Maybe you could just check on ge_b850v3_lvds_ptr itself being
> non-NULL, and set ge_b850v3_lvds_ptr to NULL when the bridge
> is removed.
Fixed and added a coment to explain why the test is there.
>
> > +
> > + drm_bridge_remove(&ge_b850v3_lvds_ptr->bridge);
> > +
> > + kfree(ge_b850v3_lvds_ptr->edid);
> > +out:
> > + mutex_unlock(&ge_b850v3_lvds_dev_mutex);
> > +}
> > +
> > +static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
> > + const struct i2c_device_id *id)
> > +{
> > + struct device *dev = &stdp4028_i2c->dev;
> > +
> > + ge_b850v3_lvds_init(dev);
> > +
> > + ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
> > + i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
> > +
> > + /* Clear pending interrupts since power up. */
> > + i2c_smbus_write_word_data(stdp4028_i2c,
> > + STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
> > +
> > + if (!stdp4028_i2c->irq)
> > + return 0;
> > +
> > + return devm_request_threaded_irq(&stdp4028_i2c->dev,
> > + stdp4028_i2c->irq, NULL,
> > + ge_b850v3_lvds_irq_handler,
> > + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > + "ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
> > +}
> > +
> > +static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
> > +{
> > + ge_b850v3_lvds_remove();
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id stdp4028_ge_b850v3_fw_i2c_table[] = {
> > + {"stdp4028_ge_fw", 0},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(i2c, stdp4028_ge_b850v3_fw_i2c_table);
> > +
> > +static const struct of_device_id stdp4028_ge_b850v3_fw_match[] = {
> > + { .compatible = "megachips,stdp4028-ge-b850v3-fw" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, stdp4028_ge_b850v3_fw_match);
> > +
> > +static struct i2c_driver stdp4028_ge_b850v3_fw_driver = {
> > + .id_table = stdp4028_ge_b850v3_fw_i2c_table,
> > + .probe = stdp4028_ge_b850v3_fw_probe,
> > + .remove = stdp4028_ge_b850v3_fw_remove,
> > + .driver = {
> > + .name = "stdp4028-ge-b850v3-fw",
> > + .of_match_table = stdp4028_ge_b850v3_fw_match,
> > + },
> > +};
> > +module_i2c_driver(stdp4028_ge_b850v3_fw_driver);
> > +
> > +static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
> > + const struct i2c_device_id *id)
> > +{
> > + ge_b850v3_lvds_init(&stdp2690_i2c->dev);
> > +
> > + ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
> > + i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
> > +
> > + return 0;
> > +}
> > +
> > +static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
> > +{
> > + ge_b850v3_lvds_remove();
> > +
> > + return 0;
> > +}
>
> A blank needed here.
Fixed.
>
> I get a lot of checkpatch compalints on alignment with parenthesis when I run
> the command with '--strict'. These aren't necessary to fix, but since it's a
> new driver, it would be nice if these are fixed too.
There was one warning about space after a cast that I fixed.
CHECK: Alignment should match open parenthesis
#156: FILE: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c:156:
+ drm_mode_connector_update_edid_property(connector,
+ ge_b850v3_lvds_ptr->edid);
The problem with these is that if I align with opening parenthesis, then
the continuation line will be over 80 chars, so I guess I'll leave these
out as there is no way to be consistent with continuation lines if I
align with opening parenthesis. But I'll happily apply the changes to
the places where it fits if this is the way to go. Align with opening
parenthesis or consistency?
>
> Thanks,
> Archit
>
> > +static const struct i2c_device_id stdp2690_ge_b850v3_fw_i2c_table[] = {
> > + {"stdp2690_ge_fw", 0},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(i2c, stdp2690_ge_b850v3_fw_i2c_table);
> > +
> > +static const struct of_device_id stdp2690_ge_b850v3_fw_match[] = {
> > + { .compatible = "megachips,stdp2690-ge-b850v3-fw" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, stdp2690_ge_b850v3_fw_match);
> > +
> > +static struct i2c_driver stdp2690_ge_b850v3_fw_driver = {
> > + .id_table = stdp2690_ge_b850v3_fw_i2c_table,
> > + .probe = stdp2690_ge_b850v3_fw_probe,
> > + .remove = stdp2690_ge_b850v3_fw_remove,
> > + .driver = {
> > + .name = "stdp2690-ge-b850v3-fw",
> > + .of_match_table = stdp2690_ge_b850v3_fw_match,
> > + },
> > +};
> > +module_i2c_driver(stdp2690_ge_b850v3_fw_driver);
> > +
> > +MODULE_AUTHOR("Peter Senna Tschudin <peter.senna at collabora.com>");
> > +MODULE_AUTHOR("Martyn Welch <martyn.welch at collabora.co.uk>");
> > +MODULE_DESCRIPTION("GE LVDS to DP++ display bridge)");
> > +MODULE_LICENSE("GPL v2");
> >
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list