[linux-sunxi] [PATCH 2/3] pwm: sunxi: Add A64 support

[Maxime Ripard]

On Sat, Feb 25, 2017 at 05:23:09PM +0800, Icenowy Zheng wrote:
> 
> 
> 25.02.2017, 16:53, "Chen-Yu Tsai" <wens at csie.org>:
> > On Sat, Feb 25, 2017 at 3:42 PM, Icenowy Zheng <icenowy at aosc.xyz> wrote:
> >>  A64 PWM controller has same register layout as sun4i driver, so it works
> >>  by adding A64 specific data.
> >>
> >>  Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
> >>  ---
> >>   drivers/pwm/pwm-sun4i.c | 9 +++++++++
> >>   1 file changed, 9 insertions(+)
> >>
> >>  diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> >>  index 1284ffa05921..ca3431e03fb8 100644
> >>  --- a/drivers/pwm/pwm-sun4i.c
> >>  +++ b/drivers/pwm/pwm-sun4i.c
> >>  @@ -290,6 +290,12 @@ static const struct sun4i_pwm_data sun4i_pwm_data_h3 = {
> >>          .npwm = 1,
> >>   };
> >>
> >>  +static const struct sun4i_pwm_data sun4i_pwm_data_a64 = {
> >>  + .has_prescaler_bypass = true,
> >>  + .has_rdy = true,
> >>  + .npwm = 1,
> >>  +};
> >>  +
> >
> > This seems to be tha same as the H3. Any differences between the
> > H3 and A64? Otherwise please just use that compatible.
> 
> H3 is also same as A13...
> 
> See http://lists.infradead.org/pipermail/linux-arm-kernel/2017-February/486595.html

What I meant was that you should have a compatible in your DT like this:

compatible = "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm".

There's no need to add a new one in the driver (for now).

And you still haven't fixed the size.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170227/ef2ba801/attachment.sig>