[PATCH v2 2/2] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
Andreas Färber
afaerber at suse.de
Sat Feb 25 17:50:35 PST 2017
Am 22.02.2017 um 09:38 schrieb Jiancheng Xue:
> Add basic dts files for hi3798cv200-poplar board. Poplar is the
> first development board compliant with the 96Boards Enterprise
> edition TV Platform specification. The board features the
"Enterprise Edition"
> Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53
> processor and high performance Mali T720 GPU.
>
> Signed-off-by: Jiancheng Xue <xuejiancheng at hisilicon.com>
> Reviewed-by: Alex Elder <elder at linaro.org>
> ---
> Changed Log:
> v2:
> - Fixed issues pointed by Rob Herring.
> 1. Moved the led node out of the soc node.
> 2. Restrained the ranges property of soc node smaller.
> - Refined the patch according to Andreas's suggestions.
> - Enabled gmac1 device node instead of gmac0.
> - Added a compatible string "syscon" for crg nodes.
>
> arch/arm64/boot/dts/hisilicon/Makefile | 1 +
> .../boot/dts/hisilicon/hi3798cv200-poplar.dts | 171 +++++++++
> arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 415 +++++++++++++++++++++
> 3 files changed, 587 insertions(+)
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
> create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
>
> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
> index c3a6c19..8960eca 100644
> --- a/arch/arm64/boot/dts/hisilicon/Makefile
> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
> @@ -1,4 +1,5 @@
> dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
> +dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
> dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
> dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
> new file mode 100644
> index 0000000..967853a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
> @@ -0,0 +1,171 @@
> +/*
> + * DTS File for HiSilicon Poplar Development Board
> + *
> + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
Rob has requested that new DT files use SPDX-License-Identifier, i.e.:
SPDX-License-Identifier: GPL-2.0+
although I believe dual-licensing is generally preferred for DT files:
SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "hi3798cv200.dtsi"
> +
> +/ {
> + model = "HiSilicon Poplar Development Board";
> + compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
> +
> + aliases {
> + serial0 = &uart0;
No alias for uart2?
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + user-led0 {
> + label = "USER-LED0";
> + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> +
> + user-led1 {
> + label = "USER-LED1";
> + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "mmc0";
> + default-state = "off";
> + };
> +
> + user-led2 {
> + label = "USER-LED2";
> + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "none";
> + default-state = "off";
> + };
> +
> + user-led3 {
> + label = "USER-LED3";
> + gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "cpu0";
> + default-state = "off";
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> + label = "LS-UART0";
> +};
> +/* No optional LS-UART1 on Low Speed Expansion Connector. */
> +
> +&i2c0 {
> + status = "okay";
> + label = "LS-I2C0";
> +};
> +
> +&i2c2 {
> + status = "okay";
> + label = "LS-I2C1";
> +};
> +
> +&spi0 {
> + status = "okay";
> + label = "LS-SPI0";
> +};
> +
> +&gpio1 {
> + status = "okay";
> + gpio-line-names = "LS-GPIO-E", "",
> + "", "",
> + "", "LS-GPIO-F",
> + "", "LS-GPIO-J";
> +};
> +
> +&gpio2 {
> + status = "okay";
> + gpio-line-names = "LS-GPIO-H", "LS-GPIO-I",
> + "LS-GPIO-L", "LS-GPIO-G",
> + "LS-GPIO-K", "",
> + "", "";
> +};
> +
> +&gpio3 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "",
> + "LS-GPIO-C", "",
> + "", "LS-GPIO-B";
> +};
> +
> +&gpio4 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "",
> + "", "LS-GPIO-D",
> + "", "";
> +};
> +
> +&gpio5 {
> + status = "okay";
> + gpio-line-names = "", "USER-LED-1",
> + "USER-LED-2", "",
> + "", "LS-GPIO-A",
> + "", "";
> +};
> +
> +&gpio6 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "USER-LED-0",
> + "", "",
> + "", "";
> +};
> +
> +&gpio10 {
> + status = "okay";
> + gpio-line-names = "", "",
> + "", "",
> + "", "",
> + "USER-LED-3", "";
> +};
> +
> +&gmac1 {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy-handle = <ð_phy1>;
> + phy-mode = "rgmii";
> + hisilicon,phy-reset-delays-us = <10000 10000 30000>;
> +
> + eth_phy1: phy at 3 {
> + reg = <3>;
> + };
> +};
> +
> +&ir {
> + status = "okay";
> +};
The node sort order seems quite random; suggest alphabetically.
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> new file mode 100644
> index 0000000..3974dd4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> @@ -0,0 +1,415 @@
> +/*
> + * DTS File for HiSilicon Hi3798cv200 SoC.
> + *
> + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
SPDX-License-Identifier
> + */
[snip]
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
More information about the linux-arm-kernel
mailing list