[PATCH v3 5/9] Documentation: DT: add entries for I2SE boards

[Rob Herring]

On Tue, Jan 31, 2017 at 07:51:11AM +0100, Michael Heimpold wrote:
> From: Michael Heimpold <mhei at heimpold.de>

"dt-bindings: arm:" is preferred subject prefix.

> 
> This patch adds the missing devicetree binding documentation for I2SE's
> Duckbill and Duckbill 2 series boards.
> 
> Signed-off-by: Michael Heimpold <mhei at heimpold.de>
> Cc: Stefan Wahren <stefan.wahren at i2se.com>
> ---
>  Documentation/devicetree/bindings/arm/i2se.txt | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/i2se.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/i2se.txt b/Documentation/devicetree/bindings/arm/i2se.txt
> new file mode 100644
> index 0000000..9954d86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/i2se.txt
> @@ -0,0 +1,22 @@
> +I2SE Device Tree Bindings
> +-------------------------
> +
> +Duckbill Board
> +Required root node properties:
> +    - compatible = "i2se,duckbill", "fsl,imx28";
> +
> +Duckbill 2 Board
> +Required root node properties:
> +    - compatible = "i2se,duckbill", "fsl,imx28";
> +
> +Duckbill 2 485 Board
> +Required root node properties:
> +    - compatible = "i2se,duckbill", "fsl,imx28";
> +
> +Duckbill 2 EnOcean Board
> +Required root node properties:
> +    - compatible = "i2se,duckbill", "fsl,imx28";
> +
> +Duckbill 2 SPI Board
> +Required root node properties:
> +    - compatible = "i2se,duckbill", "fsl,imx28";

It's kind of pointless to have "i2se,duckbill" if you use the same one 
for all these boards.

Rob