[PATCH 1/8] watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
Guenter Roeck
linux at roeck-us.net
Fri Feb 24 07:32:47 PST 2017
On 02/24/2017 07:11 AM, Krzysztof Kozlowski wrote:
> The CONFIG prefix from defines in the s3c2410_wdt.c might suggest that
> these constants come from Kconfig.
>
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
Reviewed-by: Guenter Roeck <linux at roeck-us.net>
> ---
> drivers/watchdog/s3c2410_wdt.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 59e95762a6de..3e216f54cb6f 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -64,8 +64,8 @@
> #define S3C2410_WTCON_PRESCALE_MASK (0xff << 8)
> #define S3C2410_WTCON_PRESCALE_MAX 0xff
>
> -#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
> -#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
> +#define S3C2410_WATCHDOG_ATBOOT (0)
> +#define S3C2410_WATCHDOG_DEFAULT_TIME (15)
>
> #define EXYNOS5_RST_STAT_REG_OFFSET 0x0404
> #define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408
> @@ -79,7 +79,7 @@
>
> static bool nowayout = WATCHDOG_NOWAYOUT;
> static int tmr_margin;
> -static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
> +static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT;
> static int soft_noboot;
> static int debug;
>
> @@ -90,10 +90,10 @@ module_param(soft_noboot, int, 0);
> module_param(debug, int, 0);
>
> MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
> - __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
> + __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")");
> MODULE_PARM_DESC(tmr_atboot,
> "Watchdog is started at boot time if set to 1, default="
> - __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
> + __MODULE_STRING(S3C2410_WATCHDOG_ATBOOT));
> MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
> @@ -406,7 +406,7 @@ static struct watchdog_ops s3c2410wdt_ops = {
> static struct watchdog_device s3c2410_wdd = {
> .info = &s3c2410_wdt_ident,
> .ops = &s3c2410wdt_ops,
> - .timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
> + .timeout = S3C2410_WATCHDOG_DEFAULT_TIME,
> };
>
> /* interrupt handler code */
> @@ -600,12 +600,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> wdt->wdt_device.timeout);
> if (ret) {
> started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
> - CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
> + S3C2410_WATCHDOG_DEFAULT_TIME);
>
> if (started == 0)
> dev_info(dev,
> "tmr_margin value out of range, default %d used\n",
> - CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
> + S3C2410_WATCHDOG_DEFAULT_TIME);
> else
> dev_info(dev, "default timer value is out of range, "
> "cannot start\n");
>
More information about the linux-arm-kernel
mailing list