[PATCH v4 1/8] ASoC: sun4i-i2s: Update binding documentation to include A31

[Mylene Josserand]

Hello Mark Brown,

Thank you to have applied my patches!

On 02/02/2017 10:24, Mylène Josserand wrote:
> Add a new compatible for sun4i-i2s driver to handle some
> SoCs that have a reset line that must be asserted/deasserted.
>
> This new compatible, "allwinner,sun6i-a31-i2s", requires the
> property "resets" which should be a phandle to the reset line.
> Except these differences, the compatible is identical to previous one
> which will not handle a reset line.
>
> Signed-off-by: Mylène Josserand <mylene.josserand at free-electrons.com>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
>  Documentation/devicetree/bindings/sound/sun4i-i2s.txt | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
> index 7b526ec64991..f4adc58f82ba 100644
> --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
> +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
> @@ -7,6 +7,7 @@ Required properties:
>
>  - compatible: should be one of the followings
>     - "allwinner,sun4i-a10-i2s"
> +   - "allwinner,sun6i-a31-i2s"
>  - reg: physical base address of the controller and length of memory mapped
>    region.
>  - interrupts: should contain the I2S interrupt.
> @@ -19,6 +20,10 @@ Required properties:
>     - "mod" : module clock for the I2S controller
>  - #sound-dai-cells : Must be equal to 0
>
> +Required properties for the following compatibles:
> +	- "allwinner,sun6i-a31-i2s"
> +- resets: phandle to the reset line for this codec
> +
>  Example:
>
>  i2s0: i2s at 01c22400 {
>

For all my series, you did not pick-up this patch. I was wondering if 
you have any comment on it? Is there something wrong?

Thank you in advance,

Best regards,

-- 
Mylène Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com