[PATCH V11 10/10] arm/arm64: KVM: add guest SEA support
gengdongjiu
gengdj.1984 at gmail.com
Mon Feb 27 03:31:21 PST 2017
@@ -1444,8 +1445,21 @@ int kvm_handle_guest_abort(struct kvm_vcpu
*vcpu, struct kvm_run *run)
/* Check the stage-2 fault is trans. fault or write fault */
fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
- if (fault_status != FSC_FAULT && fault_status != FSC_PERM &&
- fault_status != FSC_ACCESS) {
+
+ /* The host kernel will handle the synchronous external abort. There
+ * is no need to pass the error into the guest.
+ */
+ if (fault_status == FSC_EXTABT) {
+ if(handle_guest_sea((unsigned long)fault_ipa,
+ kvm_vcpu_get_hsr(vcpu))) {
+ kvm_err("Failed to handle guest SEA, FSC:
EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
+ kvm_vcpu_trap_get_class(vcpu),
+ (unsigned long)kvm_vcpu_trap_get_fault(vcpu),
+ (unsigned long)kvm_vcpu_get_hsr(vcpu));
+ return -EFAULT;
+ }
+ } else if (fault_status != FSC_FAULT && fault_status != FSC_PERM &&
+ fault_status != FSC_ACCESS) {
kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
kvm_vcpu_trap_get_class(vcpu),
(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
if the error is SEA and we want to inject the sea to guest OK, after
finish the handle, whether we need to directly return? instead of
continuation? as shown below:
if (fault_status == FSC_EXTABT) {
if(handle_guest_sea((unsigned long)fault_ipa,
kvm_vcpu_get_hsr(vcpu))) {
kvm_err("Failed to handle guest SEA, FSC:
EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
kvm_vcpu_trap_get_class(vcpu),
(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
(unsigned long)kvm_vcpu_get_hsr(vcpu));
return -EFAULT;
} else
return 1;
2017-02-24 18:42 GMT+08:00 James Morse <james.morse at arm.com>:
> Hi Tyler,
>
> On 21/02/17 21:22, Tyler Baicar wrote:
>> Currently external aborts are unsupported by the guest abort
>> handling. Add handling for SEAs so that the host kernel reports
>> SEAs which occur in the guest kernel.
>
>> diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
>> index e22089f..33a77509 100644
>> --- a/arch/arm/include/asm/kvm_arm.h
>> +++ b/arch/arm/include/asm/kvm_arm.h
>> @@ -187,6 +187,7 @@
>> #define FSC_FAULT (0x04)
>> #define FSC_ACCESS (0x08)
>> #define FSC_PERM (0x0c)
>> +#define FSC_EXTABT (0x10)
>
> arm64 has ESR_ELx_FSC_EXTABT which is used in inject_abt64(), but for matching
> an external abort coming from hardware the range is wider.
>
> Looking at the ARM-ARMs 'ISS encoding for an exception from an Instruction
> Abort' in 'D7.2.27 ESR_ELx, Exception Syndrome Register (ELx)' (page D7-1954 of
> version 'k'...iss10775), the ten flavours of you Synchronous abort you hooked
> with do_sea() in patch 4 occupy 0x10 to 0x1f...
>
>
>> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
>> index a5265ed..04f1dd50 100644
>> --- a/arch/arm/kvm/mmu.c
>> +++ b/arch/arm/kvm/mmu.c
>> @@ -29,6 +29,7 @@
>> #include <asm/kvm_asm.h>
>> #include <asm/kvm_emulate.h>
>> #include <asm/virt.h>
>> +#include <asm/system_misc.h>
>>
>> #include "trace.h"
>>
>> @@ -1444,8 +1445,21 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
>>
>> /* Check the stage-2 fault is trans. fault or write fault */
>> fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
>
> ... kvm_vcpu_trap_get_fault_type() on both arm and arm64 masks the HSR/ESR_EL2
> with 0x3c ...
>
>
>> - if (fault_status != FSC_FAULT && fault_status != FSC_PERM &&
>> - fault_status != FSC_ACCESS) {
>> +
>> + /* The host kernel will handle the synchronous external abort. There
>> + * is no need to pass the error into the guest.
>> + */
>> + if (fault_status == FSC_EXTABT) {
>
> ... but here we only check for 'Synchronous external abort, not on a translation
> table walk'. Are the other types relevant?
>
> If so we need some helper as this range is sparse and 'all other values are
> reserved'. The aarch32 HSR format is slightly different. (G6-4411 ISS encoding
> from an exception from a Data Abort).
>
> If not, can we change patch 4 to check this type too so we don't call out to
> APEI for a fault type we know isn't relevant.
>
>
>> + if(handle_guest_sea((unsigned long)fault_ipa,
>> + kvm_vcpu_get_hsr(vcpu))) {
>> + kvm_err("Failed to handle guest SEA, FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
>> + kvm_vcpu_trap_get_class(vcpu),
>> + (unsigned long)kvm_vcpu_trap_get_fault(vcpu),
>> + (unsigned long)kvm_vcpu_get_hsr(vcpu));
>> + return -EFAULT;
>> + }
>> + } else if (fault_status != FSC_FAULT && fault_status != FSC_PERM &&
>> + fault_status != FSC_ACCESS) {
>> kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
>> kvm_vcpu_trap_get_class(vcpu),
>> (unsigned long)kvm_vcpu_trap_get_fault(vcpu),
>
>> diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
>> index b2d57fc..403277b 100644
>> --- a/arch/arm64/mm/fault.c
>> +++ b/arch/arm64/mm/fault.c
>> @@ -602,6 +602,24 @@ static const char *fault_name(unsigned int esr)
>> }
>>
>> /*
>> + * Handle Synchronous External Aborts that occur in a guest kernel.
>> + */
>> +int handle_guest_sea(unsigned long addr, unsigned int esr)
>> +{
>
>> + if(IS_ENABLED(HAVE_ACPI_APEI_SEA)) {
>> + nmi_enter();
>> + ghes_notify_sea();
>> + nmi_exit();
>
> This nmi stuff was needed for synchronous aborts that may have interrupted
> APEI's interrupts-masked code. We want to avoid trying to take the same set of
> locks, hence taking the in_nmi() path through APEI. Here we know we interrupted
> a guest, so there is no risk that we have interrupted APEI on the host.
> ghes_notify_sea() can safely take the normal path.
>
>
> Thanks,
>
> James
More information about the linux-arm-kernel
mailing list