[PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution

Jonathan Cameron jic23 at kernel.org
Sun Feb 19 04:09:09 PST 2017


On 15/02/17 16:55, Fabrice Gasnier wrote:
> Add documentation for 'st,adc-res' dt optional property.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
I'm happy with this, but would like to leave time for a device tree review.

Ultimately we may well want to make this a generic property and call it something
like adc-resolution but perhaps we need to wait until we have a few more devices
supporting setting it via device tree to figure out what the best interface is.
It would exactly be a problem to support this as a deprecated binding at that
point.

Give me a poke if we hear nothing from Rob or Mark for say another week.

Thanks,

Jonathan

> ---
>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index 5dfc88e..45f7ff2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -57,6 +57,9 @@ Optional properties:
>  - dmas: Phandle to dma channel for this ADC instance.
>    See ../../dma/dma.txt for details.
>  - dma-names: Must be "rx" when dmas property is being used.
> +- st,adc-res: Resolution (bits) to use for conversions. Must match device
> +  available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4). Default
> +  is maximum resolution if unset.
>  
>  Example:
>  	adc: adc at 40012000 {
> @@ -84,6 +87,7 @@ Example:
>  			st,adc-channels = <8>;
>  			dmas = <&dma2 0 0 0x400 0x0>;
>  			dma-names = "rx";
> +			st,adc-res = <8>;
>  		};
>  		...
>  		other adc child nodes follow...
> 




More information about the linux-arm-kernel mailing list