[linux-sunxi] [PATCH 2/3] pwm: sunxi: Add A64 support

[Chen-Yu Tsai]

On Sat, Feb 25, 2017 at 3:42 PM, Icenowy Zheng <icenowy at aosc.xyz> wrote:
> A64 PWM controller has same register layout as sun4i driver, so it works
> by adding A64 specific data.
>
> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
> ---
>  drivers/pwm/pwm-sun4i.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> index 1284ffa05921..ca3431e03fb8 100644
> --- a/drivers/pwm/pwm-sun4i.c
> +++ b/drivers/pwm/pwm-sun4i.c
> @@ -290,6 +290,12 @@ static const struct sun4i_pwm_data sun4i_pwm_data_h3 = {
>         .npwm = 1,
>  };
>
> +static const struct sun4i_pwm_data sun4i_pwm_data_a64 = {
> +       .has_prescaler_bypass = true,
> +       .has_rdy = true,
> +       .npwm = 1,
> +};
> +

This seems to be tha same as the H3. Any differences between the
H3 and A64? Otherwise please just use that compatible.

ChenYu

>  static const struct of_device_id sun4i_pwm_dt_ids[] = {
>         {
>                 .compatible = "allwinner,sun4i-a10-pwm",
> @@ -307,6 +313,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
>                 .compatible = "allwinner,sun8i-h3-pwm",
>                 .data = &sun4i_pwm_data_h3,
>         }, {
> +               .compatible = "allwinner,sun50i-a64-pwm",
> +               .data = &sun4i_pwm_data_a64,
> +       }, {
>                 /* sentinel */
>         },
>  };
> --
> 2.11.1
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.