[PATCH 3/4] ARM: dts: da850-evm: add the output port to the vpif node
Bartosz Golaszewski
bgolaszewski at baylibre.com
Thu Feb 16 10:15:31 PST 2017
Extend the vpif node with an output port with a single channel.
NOTE: this is still just hardware description - the actual driver
is registered using pdata-quirks.
Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
arch/arm/boot/dts/da850-evm.dts | 13 ++++++++++---
arch/arm/boot/dts/da850.dtsi | 8 +++++++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 14f6f8ea..b549861 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -300,16 +300,23 @@
status = "okay";
/* VPIF capture port */
- port {
- vpif_ch0: endpoint at 0 {
+ port at 0 {
+ vpif_input_ch0: endpoint at 0 {
reg = <0>;
bus-width = <8>;
};
- vpif_ch1: endpoint at 1 {
+ vpif_input_ch1: endpoint at 1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ /* VPIF display port */
+ port at 1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 5150331..c708155 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -358,7 +358,13 @@
status = "disabled";
/* VPIF capture port */
- port {
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* VPIF display port */
+ port at 1 {
#address-cells = <1>;
#size-cells = <0>;
};
--
2.9.3
More information about the linux-arm-kernel
mailing list