[PATCH] ASoC: bcm2835: Add 8 channel (multitrack) capability

[Mark Brown]

On Tue, Feb 07, 2017 at 10:09:36AM +1100, Matt Flax wrote:

>  	case SND_SOC_DAIFMT_CBS_CFM:
>  		clk_set_rate(dev->clk, sampling_rate * bclk_ratio);
> +	case SND_SOC_DAIFMT_CBM_CFS:

Is this fall through deliberate?

> +	/* Default data delay to 1 bit.
> +	   In I2S mode, we must have 2 channels */
>  	switch (dev->fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>  	case SND_SOC_DAIFMT_I2S:
> +		if (params_channels(params) != 2)
> +			return -EINVAL;
> +	case SND_SOC_DAIFMT_DSP_A:
> +	case SND_SOC_DAIFMT_DSP_B:
>  		data_delay = 1;
>  		break;
>  	default:

Same here.  This is also buggy in that it treats DSP A and DSP B
identically, they are different so the configuration must be incorrect
for one of them.  I suspect this is configuring for DSP A.

You should also really have a setup() function that imposes a channel
constraint when in I2S mode, wm8988 is one example here.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170208/3e1a2c01/attachment.sig>