November 2009 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Nov 1 00:47:55 EDT 2009
Ending: Mon Nov 30 23:54:59 EST 2009
Messages: 2100

• [PATCH 0/7] S3C64XX: Add platform support for Samsung S3C IDE controller driver   Thomas Abraham
• [PATCH 1/7] S3C64XX: Add physical address definition for Compact Flash controller.   Thomas Abraham
• [PATCH 2/7] S3C64XX: Add MEM_SYS_CFG register definition.   Thomas Abraham
  • [PATCH 2/7] S3C64XX: Add MEM_SYS_CFG register definition.   Ben Dooks
    • [PATCH 2/7] S3C64XX: Add MEM_SYS_CFG register definition.   Thomas Abraham
• [PATCH 3/7] S3C64XX: Add IDE controller register definitions.   Thomas Abraham
• [PATCH 4/7] S3C64XX: Add clock source definition for IDE controller.   Thomas Abraham
• [PATCH 5/7] S3C64XX: Add platform data and driver resources for IDE controller driver.   Thomas Abraham
  • [PATCH 5/7] S3C64XX: Add platform data and driver resources for IDE controller driver.   Ben Dooks
    • [PATCH 5/7] S3C64XX: Add platform data and driver resources for IDE controller driver.   Thomas Abraham
    • [PATCH 5/7] S3C64XX: Add platform data and driver resources for IDE controller driver.   Håkon Løvdal
• [PATCH 6/7] S3C6410: Add platform data for S3C IDE controller driver   Thomas Abraham
  • [PATCH 6/7] S3C6410: Add platform data for S3C IDE controller driver   Ben Dooks
    • [PATCH 6/7] S3C6410: Add platform data for S3C IDE controller driver   Thomas Abraham
• [PATCH 7/7] S3C64XX: Include IDE device code in compilation.   Thomas Abraham
• [PATCH] S3C: ide: Add Samsung S3C IDE controller driver   Thomas Abraham
  • [PATCH] S3C: ide: Add Samsung S3C IDE controller driver   Jeff Garzik
    • [PATCH] S3C: ide: Add Samsung S3C IDE controller driver   David Miller
  • [PATCH] S3C: ide: Add Samsung S3C IDE controller driver   Alan Cox
• Soc camera:Is there anyone dealing with ov9650chip?Let's talk about soc camera driver.   Jonathan Cameron
  • Soc camera:Is there anyone dealing with ov9650chip?Let's talk about soc camera driver.   Guennadi Liakhovetski
  • Soc camera:Is there anyone dealing with ov9650chip?Let's talk about soc camera driver.   dean_go Zhang
• Possible suspend/resume regression in .32-rc?   Ryan Mallon
• Possible suspend/resume regression in .32-rc?   Uwe Kleine-König
• [PATCH] at91: support for eco920   Uwe Kleine-König
  • [PATCH] at91: support for eco920   Andrew Victor
    • [PATCH] at91: support for eco920   Uwe Kleine-König
      • [PATCH] at91: support for eco920   Russell King - ARM Linux
• [PATCH] [RTC] Add Freescale MC13783 RTC driver   Uwe Kleine-König
  • [PATCH] [RTC] Add Freescale MC13783 RTC driver   Valentin Longchamp
    • [PATCH] [RTC] Add Freescale MC13783 RTC driver   Valentin Longchamp
• [PATCH] imx/gpio: Use handle_level_irq   Uwe Kleine-König
• Possible suspend/resume regression in .32-rc?   Daniel Mack
  • Possible suspend/resume regression in .32-rc?   Pavel Machek
    • Possible suspend/resume regression in .32-rc?   Pavel Machek
      • Possible suspend/resume regression in .32-rc?   Haojian Zhuang
      • Possible suspend/resume regression in .32-rc?   Daniel Mack
      • Possible suspend/resume regression in .32-rc?   Pavel Machek
      • Possible suspend/resume regression in .32-rc?   Eric Miao
      • Possible suspend/resume regression in .32-rc?   Haojian Zhuang
      • Possible suspend/resume regression in .32-rc?   Pavel Machek
      • Possible suspend/resume regression in .32-rc?   Haojian Zhuang
      • Possible suspend/resume regression in .32-rc?   Daniel Mack
      • Possible suspend/resume regression in .32-rc?   Pavel Machek
      • Possible suspend/resume regression in .32-rc?   Stanislav Brabec
      • Possible suspend/resume regression in .32-rc?   Haojian Zhuang
      • Possible suspend/resume regression in .32-rc?   Stanislav Brabec
      • Possible suspend/resume regression in .32-rc?   Haojian Zhuang
• [PATCH 02/12] ARM: S3C24XX: Introduce S3C2442B CPU   Pavel Machek
• Possible suspend/resume regression in .32-rc?   Pavel Machek
  • Possible suspend/resume regression in .32-rc?   Daniel Mack
• [3/3,ARM] msm: add minimal board file for HTC Dream device   Pavel Machek
• [PATCH 1/3] staging/dream: add gpio and pmem support   Pavel Machek
• [PATCH 3/3] staging/dream: Add final missing bits   Pavel Machek
• [3/3,ARM] msm: add minimal board file for HTC Dream device   Brian Swetland
  • [3/3,ARM] msm: add minimal board file for HTC Dream device   Pavel Machek
    • [3/3,ARM] msm: add minimal board file for HTC Dream device   Brian Swetland
      • [3/3,ARM] msm: add minimal board file for HTC Dream device   Pavel Machek
• [PATCH] Add KZM-ARM11-01 support   Yoichi Yuasa
  • [PATCH v2] Add KZM-ARM11-01 support   Yoichi Yuasa
• Why flush_cache_all() not including flushing L2 cache if the system has L2 cache?   Peter Chen
  • Why flush_cache_all() not including flushing L2 cache if the system has L2 cache?   Eric Miao
    • Why flush_cache_all() not including flushing L2 cache if the system has L2 cache?   Peter Chen
  • Why flush_cache_all() not including flushing L2 cache if the system has L2 cache?   Russell King - ARM Linux
    • Why flush_cache_all() not including flushing L2 cache if the system has L2 cache?   Peter Chen
• [PATCH] KS8695: Fix macro definition bug in regs-switch.c   zealcook at gmail.com
  • [PATCH] KS8695: Fix macro definition bug in regs-switch.c   Andrew Victor
• [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Gupta, Ajay Kumar
  • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Russell King - ARM Linux
    • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Gupta, Ajay Kumar
      • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Felipe Balbi
      • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Gupta, Ajay Kumar
      • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Felipe Balbi
      • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Russell King - ARM Linux
      • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Gupta, Ajay Kumar
      • [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Gupta, Ajay Kumar
• 回复： what's zero_pages for in paging_int   胡杨树
• Using statically allocated memory for platform_data.   Antonio Ospite
  • Using statically allocated memory for platform_data.   Uwe Kleine-König
    • Using statically allocated memory for platform_data.   Ben Dooks
  • Using statically allocated memory for platform_data.   Ben Dooks
    • Using statically allocated memory for platform_data.   Russell King - ARM Linux
      • Using statically allocated memory for platform_data.   Ben Dooks
      • Using statically allocated memory for platform_data.   Ben Dooks
      • Using statically allocated memory for platform_data.   Russell King - ARM Linux
      • Using statically allocated memory for platform_data.   Ben Dooks
      • Using statically allocated memory for platform_data.   Russell King - ARM Linux
      • Using statically allocated memory for platform_data.   Ben Dooks
      • Using statically allocated memory for platform_data.   Antonio Ospite
  • Using statically allocated memory for platform_data.   Antonio Ospite
• [PATCH 1/3] msm: make debugging UART (for DEBUG_LL) configurable   Pavel Machek
• [PATCH 2/3] msm: add minimal board file for HTC Dream device   Pavel Machek
  • [PATCH 2/3] msm: add minimal board file for HTC Dream device   Russell King - ARM Linux
    • [PATCH 2/3] msm: add minimal board file for HTC Dream device   Brian Swetland
      • [PATCH 2/3] msm: add minimal board file for HTC Dream device   Russell King - ARM Linux
      • [PATCH 2/3] msm: add minimal board file for HTC Dream device   Brian Swetland
      • [PATCH 2/3] msm: add minimal board file for HTC Dream device   Robert Jarzmik
• [PATCH 3/3] msm: Add memory map for HTC Dream   Pavel Machek
• msm_sdcc.c: add missing include, fix compilation   Pavel Machek
• [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Haojian Zhuang
  • [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Russell King - ARM Linux
    • [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Eric Miao
  • [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Robert Jarzmik
    • [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Haojian Zhuang
      • [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Eric Miao
• [PATCH 33/46] davinci: add generic CPUFreq driver for DaVinci   Nori, Sekhar
  • [PATCH 33/46] davinci: add generic CPUFreq driver for DaVinci   Kevin Hilman
• [PATCH 1/2] ep93xx/micro9.c: fix implicit declaration offunction__raw_readl and IOMEM   H Hartley Sweeten
• [PATCH] [ARM] fix csum_partial_copy_from_user() fault handler   Catalin Marinas
• kernel BUG at kernel/posix-cpu-timers.c:1389!   Nicolas Ferre
  • kernel BUG at kernel/posix-cpu-timers.c:1389!   Russell King - ARM Linux
    • kernel BUG at kernel/posix-cpu-timers.c:1389!   E Robertson
      • kernel BUG at kernel/posix-cpu-timers.c:1389!   Russell King - ARM Linux
    • kernel BUG at kernel/posix-cpu-timers.c:1389!   Uwe Kleine-König
• [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Nicolas Ferre
  • [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Ben Nizette
  • [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Ben Nizette
  • [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Ryan Mallon
    • [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Ben Nizette
      • [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Haavard Skinnemoen
• [PATCH 3/3 v2] at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board   Nicolas Ferre
• [PATCH 2/3 v2] mmc: atmel-mci: New MCI2 module support in atmel-mci driver   Nicolas Ferre
  • [PATCH 2/3 v2] mmc: atmel-mci: New MCI2 module support in atmel-mci driver   Nicolas Ferre
• [RFC PATCH 00/10] PCMCIA soc_common re-factorization   Dominik Brodowski
• [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Haojian Zhuang
• [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Haojian Zhuang
• [PATCH] pxa: fix system resume issue on pxa27x and pxa3xx   Haojian Zhuang
• MXC MMC driver and SDIO peripherals   Dan Williams
• [PATCH] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
• [PATCH 1/6] pxa: support pxa168 LCD controller SPI operation   Jun Nie
  • [PATCH 1/6] pxa: support pxa168 LCD controller SPI operation   Jun Nie
  • [PATCH 1/6] pxa: support pxa168 LCD controller SPI operation   Eric Miao
  • [PATCH 1/6] pxa: support pxa168 LCD controller SPI operation   Russell King - ARM Linux
• [PATCH 2/6] pxa: frame buffer support both pxa168 and pxa910   Jun Nie
  • [PATCH 2/6] pxa: frame buffer support both pxa168 and pxa910   Jun Nie
  • [PATCH 2/6] pxa: frame buffer support both pxa168 and pxa910   Eric Miao
• [PATCH 3/6] pxa: fix pxa168 lcd controller vsync/hsync timing error   Jun Nie
  • [PATCH 3/6] pxa: fix pxa168 lcd controller vsync/hsync timing error   Jun Nie
  • [PATCH 3/6] pxa: fix pxa168 lcd controller vsync/hsync timing error   Eric Miao
    • [PATCH 3/6] pxa: fix pxa168 lcd controller vsync/hsync timing error   Jun Nie
      • [PATCH 3/6] pxa: fix pxa168 lcd controller vsync/hsync timing error   Eric Miao
      • [PATCH 3/6] pxa: fix pxa168 lcd controller vsync/hsync timing error   Jun Nie
• [PATCH 4/6] pxa: support frame buffer on pxa910 ttc_dkb platform   Jun Nie
  • [PATCH 4/6] pxa: support frame buffer on pxa910 ttc_dkb platform   Jun Nie
• [PATCH 5/6] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
  • [PATCH 5/6] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
• [PATCH 6/6] pxa: add frame buffer support on pxa168 aspenite platform   Jun Nie
  • [PATCH 6/6] pxa: add frame buffer support on pxa168 aspenite platform   Jun Nie
• [PATCH 1/3] [ARM] serial/pxa: work around Errata #75   Uwe Kleine-König
• [PATCH] [ARM] serial/pxa: work around Errata #75   Uwe Kleine-König
  • [PATCH] [ARM] serial/pxa: work around Errata #75   Uwe Kleine-König
    • [PATCH] [ARM] serial/pxa: work around Errata #75   Haojian Zhuang
      • [PATCH] [ARM] serial/pxa: work around Errata #75   Uwe Kleine-König
• dream: glue for mmc controller   Pavel Machek
  • dream: glue for mmc controller   Ben Dooks
    • dream: glue for mmc controller   Pavel Machek
      • dream: glue for mmc controller   Russell King - ARM Linux
      • dream: glue for mmc controller   Arve Hjønnevåg
• [PATCH 5/6] mx31moboard: camera support   Valentin Longchamp
  • [PATCH 5/6] mx31moboard: camera support   Guennadi Liakhovetski
    • [PATCH 5/6] mx31moboard: camera support   Valentin Longchamp
• [PATCH] at91: at91sam9g20ek modify dual slot evaluation kit   Nicolas Ferre
• [PATCH] Make MIPS dynamic clocksource/clockevent clock code generic v2   Linus Walleij
  • [PATCH] Make MIPS dynamic clocksource/clockevent clock code generic v2   Thomas Gleixner
• marvell kirkwood / openrd-base kernel freeze on bootup with PICe->PCI bridge   Dieter Kiermaier
• [PATCH 1/9] SMDK6410: Configure GPIO pull up for WM835x IRQ line   Mark Brown
  • [PATCH 2/9] S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value   Mark Brown
    • [PATCH 2/9] S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value   Ben Dooks
• [PATCH 3/9] SMDK6410: Hook up regulator supplies for WM8580   Mark Brown
  • [PATCH 4/9] S3C64XX: Provide logging when CPU frequencies are eliminated due to clocks   Mark Brown
    • [PATCH 5/9] S3C64XX: Set rate of crystal mux   Mark Brown
      • [PATCH 6/9] S3C64XX: Provide control of APLL   Mark Brown
      • [PATCH 5/9] S3C64XX: Set rate of crystal mux   Ben Dooks
• [PATCH 7/9] SMDK6410: Allocate more GPIO space for WM1190-EV1   Mark Brown
  • [PATCH 8/9] S3C64XX: Separate out regulator and frequency latencies   Mark Brown
    • [PATCH 9/9] S3C64XX: Redo voltage ranges for cpufreq   Mark Brown
• [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line   Nicolas Ferre
• [PATCH 1/3] at91: remove not needed depends on   Nicolas Ferre
• [PATCH 2/3] at91: Kconfig simplification   Nicolas Ferre
• [PATCH 3/3] atmel_lcdfb Kconfig: remove long dependency line   Nicolas Ferre
  • [PATCH v2] atmel_lcdfb Kconfig: remove long dependency line   Nicolas Ferre
    • [PATCH v2] atmel_lcdfb Kconfig: remove long dependency line   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] ezx: A780/A910 camera, A910 leds, ezx_defconfig update   Antonio Ospite
  • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
    • [PATCH 2/3] ezx: Add leds-lp3944 support for A910 EZX phone   Antonio Ospite
      • [PATCH 2/3] ezx: Add leds-lp3944 support for A910 EZX phone   Eric Miao
      • [PATCH 2/3] ezx: Add leds-lp3944 support for A910 EZX phone   Eric Miao
    • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Eric Miao
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Robert Jarzmik
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Eric Miao
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Eric Miao
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v2] ezx: Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3 v3] Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v3] Add camera support for A780 and A910 EZX phones   Eric Miao
      • [PATCH 1/3 v3] Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3 v3] Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v4] Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3 v4] Add camera support for A780 and A910 EZX phones   Guennadi Liakhovetski
      • [PATCH 1/3 v4] Add camera support for A780 and A910 EZX phones   Eric Miao
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
      • [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Eric Miao
  • [PATCH 0/3] ezx: A780/A910 camera, A910 leds, ezx_defconfig update   Stefan Schmidt
    • [PATCH 0/3] ezx: A780/A910 camera, A910 leds, ezx_defconfig update   Antonio Ospite
      • [PATCH 0/3] ezx: A780/A910 camera, A910 leds, ezx_defconfig update   Eric Miao
      • [PATCH 0/3] ezx: A780/A910 camera, A910 leds, ezx_defconfig update   Antonio Ospite
  • [PATCH 3/3] ezx: Update ezx_defconfig now that ezx-pcap is in   Antonio Ospite
    • [PATCH 3/3] ezx: Update ezx_defconfig now that ezx-pcap is in   Antonio Ospite
    • [PATCH 3/3] ezx: Update ezx_defconfig now that ezx-pcap is in   Eric Miao
• [PATCH 0/6] mx31moboard: patches for next merge window v2   Valentin Longchamp
  • [PATCH 1/6] mx31: various pins used for mx31moboard   Valentin Longchamp
  • [PATCH 0/6] mx31moboard: patches for next merge window v2   Sascha Hauer
  • [PATCH 0/6] mx31moboard: patches for next merge window v2   Daniel Mack
    • [PATCH 0/6] mx31moboard: patches for next merge window v2   Valentin Longchamp
• [PATCH 2/6] mx31moboard: serial port fix   Valentin Longchamp
• [PATCH 3/6] mx31moboard: support for pin linked for battery presence check   Valentin Longchamp
• [PATCH 4/6] mx31moboard: SPI and MC13783 voltage regulator support   Valentin Longchamp
  • [PATCH 5/6] mx31moboard: initialize ipu device for all the boards   Valentin Longchamp
    • [PATCH 6/6] mx31moboard: camera support   Valentin Longchamp
      • [PATCH 6/6] mx31moboard: camera support   Guennadi Liakhovetski
    • [PATCH 5/6] mx31moboard: initialize ipu device for all the boards   Guennadi Liakhovetski
  • [PATCH 4/6] mx31moboard: SPI and MC13783 voltage regulator support   Guennadi Liakhovetski
    • [PATCH 4/6] mx31moboard: SPI and MC13783 voltage regulator support   Valentin Longchamp
• [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set   Tony Lindgren
• Please advise on modifying defconfig for Amstrad Delta   Tony Lindgren
• [GIT PULL] AT91/AVR32 some common macros   Nicolas Ferre
  • [GIT PULL] AT91/AVR32 some common macros   Linus Torvalds
    • [GIT PULL] AT91/AVR32 some common macros   Matthew Palmer
      • [GIT PULL] AT91/AVR32 some common macros   Nicolas Ferre
• [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Uwe Kleine-König
  • [PATCH 2/2] [ARM] i2c/pxa: only define 'blue_murder'-function if DEBUG is #defined   Uwe Kleine-König
  • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Pavel Machek
  • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Uwe Kleine-König
  • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Russell King
    • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Ben Dooks
      • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Russell King - ARM Linux
    • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Uwe Kleine-König
  • [PATCH 1/2] [ARM] i2c/pxa: remove unused macro   Ben Dooks
  • [PATCH 1/2 RESENT] [ARM] i2c/pxa: remove unused macro   Uwe Kleine-König
    • [PATCH 2/2 RESENT] [ARM] i2c/pxa: only define 'blue_murder'-function if DEBUG is #defined   Uwe Kleine-König
      • [PATCH 2/2 RESENT] [ARM] i2c/pxa: only define 'blue_murder'-function if DEBUG is #defined   Eric Miao
    • [PATCH 1/2 RESEND#2] i2c/pxa: remove unused macro   Uwe Kleine-König
      • [PATCH 2/2 RESEND#2] i2c/pxa: only define 'blue_murder'-function if DEBUG is #defined   Uwe Kleine-König
      • [PATCH 1/2 RESEND#2] i2c/pxa: remove unused macro   Uwe Kleine-König
• [PATCH] IXP4xx: Ensure index is positive   Roel Kluin
  • [PATCH] IXP4xx: Ensure index is positive   Karl Hiramoto
    • [PATCH] IXP4xx: Ensure index is positive   Krzysztof Halasa
      • [PATCH] IXP4xx: Ensure index is positive   Roel Kluin
      • [PATCH] IXP4xx: Ensure index is positive   Krzysztof Halasa
• [PATCH] [RTC] Add Freescale MC13783 RTC driver   Uwe Kleine-König
• [RFC] [PATCH v2] OMAP: DMA: Fix omapfb/lcdc on Amstrad Delta broken when PM set   Janusz Krzysztofik
  • [RFC] [PATCH v2] OMAP: DMA: Fix omapfb/lcdc on Amstrad Delta broken when PM set   Janusz Krzysztofik
    • [RFC] [PATCH v2] OMAP: DMA: Fix omapfb/lcdc on Amstrad Delta broken when PM set   Tony Lindgren
• collie and SA1100 patches   Thomas Kunze
  • collie and SA1100 patches   Pavel Machek
    • collie and SA1100 patches   Russell King - ARM Linux
    • collie and SA1100 patches   Kristoffer Ericson
• patch system doesn't parse From: pseudo header (Was: [PATCH] Use REV and REV16 for byte swapping on ARMv6+)   Uwe Kleine-König
  • patch system doesn't parse From: pseudo header (Was: [PATCH] Use REV and REV16 for byte swapping on ARMv6+)   Russell King - ARM Linux
    • patch system doesn't parse From: pseudo header (Was: [PATCH] Use REV and REV16 for byte swapping on ARMv6+)   Uwe Kleine-König
• [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Marc Zyngier
  • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Haojian Zhuang
    • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Eric Miao
      • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Marc Zyngier
      • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Haojian Zhuang
      • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Eric Miao
      • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Marc Zyngier
      • [PATCH] Fix PXA-27x/3xx interrupts when CONFIG_PXA_HAVE_ISA_IRQS=y   Eric Miao
• [PATCH]: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.   Maurus Cuelenaere
  • [PATCH]: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.   Ben Dooks
    • [PATCH]: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.   Maurus Cuelenaere
      • [PATCH]: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.   Ben Dooks
      • [PATCH]: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.   jassi brar
• S3C24XX: Add documentation for arch/arm/plat-s3c24xx/include/plat/mci.h   Ben Dooks
• s3cmci: convert missed s3c2410_gpio calls to gpiolib calls   Ben Dooks
  • s3cmci: convert missed s3c2410_gpio calls to gpiolib calls   Ben Dooks
• s3cmci: convert missed s3c2410_gpio calls to gpiolib calls   Ben Dooks
• drivers/video/msm: update to new kernel   Andrew Morton
  • drivers/video/msm: update to new kernel   Pavel Machek
• imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Vadivelan M
  • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Daniel Mack
    • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Vadivelan M
      • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Daniel Mack
      • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Andy Green
      • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Vadivelan M
• pxafb: RGBT555 support   pieterg
  • pxafb: RGBT555 support   Eric Miao
    • pxafb: RGBT555 support   pieterg
      • pxafb: RGBT555 support   Eric Miao
      • pxafb: RGBT555 support   pieterg
      • pxafb: RGBT555 support   pieterg
      • pxafb: RGBT555 support   Eric Miao
• [PATCH] atmel_lcdfb: New alternate pixel clock formula   Nicolas Ferre
• [PATCHv2]: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.   Maurus Cuelenaere
• [PATCH] [ARM] pxa/pxa3xx.c: register U2D clock   Igor Grinberg
  • [PATCH] [ARM] pxa: add U2D registers and bits definitions   Igor Grinberg
    • [PATCH] [ARM] pxa: add U2D registers and bits definitions   Eric Miao
      • [PATCH] [ARM] pxa: add U2D registers and bits definitions   Mike Rapoport
  • [PATCH] [ARM] pxa/pxa3xx.c: register U2D clock   Eric Miao
    • [PATCH] [ARM] pxa/pxa3xx.c: register U2D clock   Mike Rapoport
• [PATCH] check put_user fail in do_signal when enable OABI_COMPACT   Jean Pihet
  • [PATCH] check put_user fail in do_signal when enable OABI_COMPACT   Russell King - ARM Linux
    • [PATCH] check put_user fail in do_signal when enable OABI_COMPACT   Jean Pihet
      • [PATCH] check put_user fail in do_signal when enable OABI_COMPACT   Russell King - ARM Linux
      • [PATCH] check put_user fail in do_signal when enable OABI_COMPACT   Jean Pihet
• [PATCH] ARM: pxafb: Use the passed fb_var_screeninfo struct in pxafb_pan_display()   Eric Miao
• [GIT PULL] pxa: fixes for 2.6.32-rc5   Eric Miao
• [GIT PULL] RealView and ARMv7 patches for 2.6.33   Catalin Marinas
• GCC built-in atomic operations and memory barriers   Toby Douglass
  • GCC built-in atomic operations and memory barriers   Russell King - ARM Linux
    • GCC built-in atomic operations and memory barriers   Toby Douglass
      • GCC built-in atomic operations and memory barriers   Russell King - ARM Linux
      • GCC built-in atomic operations and memory barriers   Toby Douglass
    • GCC built-in atomic operations and memory barriers   Gilles Chanteperdrix
      • GCC built-in atomic operations and memory barriers   Toby Douglass
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Russell King - ARM Linux
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Russell King - ARM Linux
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Catalin Marinas
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Russell King - ARM Linux
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Catalin Marinas
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Jamie Lokier
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Jamie Lokier
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Catalin Marinas
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Jamie Lokier
      • CAS implementation may be broken   Russell King - ARM Linux
      • CAS implementation may be broken   Jamie Lokier
      • CAS implementation may be broken   Catalin Marinas
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Catalin Marinas
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Russell King - ARM Linux
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Toby Douglass
      • CAS implementation may be broken   Catalin Marinas
      • CAS implementation may be broken   Toby Douglass
• [PATCH] s3c24xx-adc: resume convertions interrupted by going to suspend   Vasily Khoruzhick
• [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Paul Fertser
  • [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Paul Fertser
    • [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Anton Vorontsov
      • [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Pavel Machek
      • [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Russell King - ARM Linux
      • [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Pavel Machek
    • [PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma   Anton Vorontsov
• [PATCH 01/02] pxa: rename macro from pxa9xx to pxa93x   Haojian Zhuang
  • [PATCH 01/02] pxa: rename macro from pxa9xx to pxa93x   Eric Miao
• [PATCH 02/02] pxa: extend gpio pins from 128 to 256   Haojian Zhuang
  • [PATCH 02/02] pxa: extend gpio pins from 128 to 256   Eric Miao
    • [PATCH 02/02] pxa: extend gpio pins from 128 to 256   Haojian Zhuang
• [PATCH] [ARM] pxa/pxa3xx.c: register U2D clock   Eric Miao
• [PATCH] [ARM] pxa: add U2D registers and bits definitions   Eric Miao
• [PATCH] ARMv7: Check whether the SMP/nAMP mode was already enabled   srinidhi kasagar
• S3C64XX DMA driver fixes   Jassi Brar
  • S3C64XX DMA driver fixes   Ben Dooks
  • S3C64XX DMA driver fixes   Mikhail Lodygin
    • S3C64XX DMA driver fixes   jassi brar
      • S3C64XX DMA driver fixes   Mikhail Lodygin
      • S3C64XX DMA driver fixes   jassi brar
• [PATCH 1/5] S3C64XX DMA: Protect buffer pointers while manipulation   Jassi Brar
• [PATCH 2/5] S3C64XX DMA: Unify callback functions for success/failure   Jassi Brar
• [PATCH 3/5] S3C64XX DMA: Callback with correct buffer pointer   Jassi Brar
• [PATCH 4/5] S3C64XX DMA: Free node for non-circular queues   Jassi Brar
• [PATCH 5/5] S3C64XX DMA: Make src and dst transfer size same   Jassi Brar
• [PATCH 00/02] pxa: update WLED output current in da9034   Haojian Zhuang
  • [PATCH 00/02] pxa: update WLED output current in da9034   Haojian Zhuang
    • [PATCH 00/02] pxa: update WLED output current in da9034   Haojian Zhuang
• [PATCH 01/02] backlight: control WLED output current in da9034   Haojian Zhuang
  • [PATCH 01/02] backlight: control WLED output current in da9034   Haojian Zhuang
    • [PATCH 01/02] backlight: control WLED output current in da9034   Haojian Zhuang
      • [PATCH 01/02] backlight: control WLED output current in da9034   Eric Miao
      • [PATCH 01/02] backlight: control WLED output current in da9034   Haojian Zhuang
      • [PATCH 01/02] backlight: control WLED output current in da9034   Eric Miao
• [PATCH 01/02] pxa: set default WLED output current in saar   Haojian Zhuang
  • [PATCH 01/02] pxa: set default WLED output current in saar   Haojian Zhuang
    • [PATCH 01/02] pxa: set default WLED output current in saar   Haojian Zhuang
      • [PATCH 01/02] pxa: set default WLED output current in saar   Haojian Zhuang
• [PATCH] MXC: Add support for ULPI Viewports   Sascha Hauer
  • [PATCH] MXC: Add support for ULPI Viewports   Daniel Mack
    • [PATCH] MXC: Add support for ULPI Viewports   Sascha Hauer
• [PATCH] [ARM] pxa: extend gpio pins from 128 to 256   Haojian Zhuang
• imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Daniel Mack
• [RFC PATCH] Add an earlyprintk debug console   Catalin Marinas
  • [RFC PATCH] Add an earlyprintk debug console   Sascha Hauer
  • [RFC PATCH] Add an earlyprintk debug console   Pandita, Vikram
    • [RFC PATCH] Add an earlyprintk debug console   Uwe Kleine-König
  • [RFC PATCH] Add an earlyprintk debug console   Uwe Kleine-König
    • [RFC PATCH] Add an earlyprintk debug console   Catalin Marinas
      • [RFC PATCH] Add an earlyprintk debug console   Uwe Kleine-König
  • [RFC PATCH] Add an earlyprintk debug console   Kristoffer Ericson
  • [RFC PATCH] Add an earlyprintk debug console   Pavel Machek
• [PATCH] Fix the machine description printing in __error_a   Catalin Marinas
  • [PATCH] Fix the machine description printing in __error_a   Uwe Kleine-König
• [RFC PATCH] ARMv7: Use lazy cache flushing if hardware broadcasts cache operations   Catalin Marinas
  • [RFC PATCH] ARMv7: Use lazy cache flushing if hardware broadcasts cache operations   Russell King - ARM Linux
    • [RFC PATCH] ARMv7: Use lazy cache flushing if hardware broadcasts cache operations   Catalin Marinas
      • [RFC PATCH] ARMv7: Use lazy cache flushing if hardware broadcasts cache operations   Russell King - ARM Linux
      • [RFC PATCH] ARMv7: Use lazy cache flushing if hardware broadcasts cache operations   Catalin Marinas
• [PATCH 1/2] Add COH 901 318 DMA block driver v3   Sosnowski, Maciej
• [PATCH] Allow platforms to control which PXA uarts are registered   Russell King - ARM Linux
  • [PATCH] Allow platforms to control which PXA uarts are registered   Antonio Ospite
  • [PATCH] Allow platforms to control which PXA uarts are registered   Mike Rapoport
  • [PATCH] Allow platforms to control which PXA uarts are registered   Juergen Schindele
    • [PATCH] Allow platforms to control which PXA uarts are registered   Russell King - ARM Linux
• cache aliasing in dup_mmap   Russell King - ARM Linux
  • cache aliasing in dup_mmap   Steven Walter
    • cache aliasing in dup_mmap   Russell King - ARM Linux
      • cache aliasing in dup_mmap   Steven Walter
      • cache aliasing in dup_mmap   Russell King - ARM Linux
      • cache aliasing in dup_mmap   Steven Walter
      • cache aliasing in dup_mmap   Russell King - ARM Linux
      • cache aliasing in dup_mmap   Russell King - ARM Linux
      • cache aliasing in dup_mmap   Steven Walter
      • cache aliasing in dup_mmap   Russell King - ARM Linux
      • cache aliasing in dup_mmap   Russell King - ARM Linux
      • cache aliasing in dup_mmap   Jamie Lokier
      • cache aliasing in dup_mmap   Russell King - ARM Linux
• [PATCH] backlight: control WLED output current in da9034   Haojian Zhuang
• [PATCH] da903x_bl: control WLED output current in da9034   Haojian Zhuang
• [PATCH] kirkwood: fix section mismatch   Li Jie
• [PATCH] [ARM] pxa: set default WLED output current in saar   Haojian Zhuang
• Patches for mxcmmc.c   Daniel Mack
  • [PATCH 1/3] ARM: MXC: mxcmmc: misc cleanups   Daniel Mack
  • Patches for mxcmmc.c   Daniel Mack
• [PATCH 2/3] ARM: MXC: mxcmmc: Fix max_seg_size assignment   Daniel Mack
  • [PATCH 3/3] ARM: MXC: mxcmmc: Teach the driver SDIO operations   Daniel Mack
  • [PATCH 2/3] ARM: MXC: mxcmmc: Fix max_seg_size assignment   Russell King - ARM Linux
    • [PATCH 2/3] ARM: MXC: mxcmmc: Fix max_seg_size assignment   Daniel Mack
• [PATCH] Kirkwood: Add support for QNAP TS-41x Turbo NAS   Martin Michlmayr
• [PATCH] Kirkwood: Add MPP36 for QNAP TS-11x/TS-21x   Martin Michlmayr
• [PATCH] Kirkwood: Add QNAP TS-110/TS-210 to Kconfig help text   Martin Michlmayr
• [PATCH v3] OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set   Janusz Krzysztofik
  • [PATCH v3] OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set   Tony Lindgren
    • [PATCH v3] OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set   Janusz Krzysztofik
• [RFC 00/11] Cache handling updates   Pavel Machek
• [PATCH] mfd: split 88pm8607 driver   Haojian Zhuang
• [PATCH] mfd: split 88pm8607 driver   Haojian Zhuang
• [PATCH] Kirkwood: Remove code duplication in QNAP setup files   Martin Michlmayr
• [PATCH 01/17] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Harald Welte
• [PATCH 02/17] ARM: S5PC1XX: registers rename   Harald Welte
  • [PATCH 02/17] ARM: S5PC1XX: registers rename   tommy.hong
  • [PATCH 02/17] ARM: S5PC1XX: registers rename   Marek Szyprowski
    • [PATCH 02/17] ARM: S5PC1XX: registers rename   Ben Dooks
• [PATCH 03/17] ARM: S5PC1XX: clock registers rename   Harald Welte
• [PATCH 05/17] ARM: S5PC1XX: add GPIO L banks to register definition   Harald Welte
• [PATCH 06/17] ARM: S5PC1XX: GPIO registers rename   Harald Welte
• [PATCH 07/17] ARM: S5PC1xx: add gpiolib and external/gpio interrupt support   Harald Welte
• Suggestion:S3C64XX and next-S3C MFC need IOCTL_MFC_RESET ?   tommy tommy
• [PATCH 08/17] ARM: S5PC1XX: add cpu idle and system reset support   Harald Welte
• [PATCH 09/17] ARM: S5PC1xx: add platform helpers for s3c-fb device   Harald Welte
• [PATCH 10/17] SMDKC100: enable S3C FrameBuffer   Harald Welte
• [PATCH 12/17] ARM: S5PC1xx: add platform helpers for i2c adapter devices   Harald Welte
• [PATCH 13/17] SMDKC100: add I2C0 and I2C1 buses support   Harald Welte
• [PATCH 15/17] ARM: S5PC1xx: add platform helpers for SDHCI host controllers   Harald Welte
• Suggestion:S3C64XX and next-S3C MFC need IOCTL_MFC_RESET ?   tommy.hong
• Suggestion:S3C64XX and next-S3C MFC need IOCTL_MFC_RESET ?   tommy
• About allocate the memory with non-secure attribute   Kukjin Kim
• about s3c64xx-ac97 irq and mmc interrupt trigger   tommy
• [PATCH v2] i2c-designware updates   Shinya Kuribayashi
  • [PATCH v2] i2c-designware updates   Ben Dooks
  • [PATCH 23/22] i2c-designware: i2c_dw_handle_tx_abort: Use dev_dbg() for NOACK cases   Shinya Kuribayashi
  • [PATCH v2] i2c-designware updates   Ben Dooks
• [PATCH] mfd: support 88pm8606 in 860x driver   Haojian Zhuang
• [PATCH] mfd: rename 8607.h to 860x.h   Haojian Zhuang
• kirkwood / openrd: umount problem using mdev (busybox)   Dieter Kiermaier
  • kirkwood / openrd: umount problem using mdev (busybox)   Dieter Kiermaier
    • kirkwood / openrd: umount problem using mdev (busybox)   Nicolas Pitre
      • kirkwood / openrd: umount problem using mdev (busybox)   Dieter Kiermaier
• [PATCH] Do not allow the probing of the local timer   Catalin Marinas
• [PATCH 1/3] ezx: Add camera support for A780 and A910 EZX phones   Antonio Ospite
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [PATCH] Orion/Kirkwood: Enable GPIO_SYSFS in defconfig   Martin Michlmayr
• [PATCH, RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Lennert Buytenhek
  • [PATCH,RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Matthew Wilcox
    • [PATCH,RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Russell King - ARM Linux
      • [PATCH,RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Matthew Wilcox
      • [PATCH,RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Russell King - ARM Linux
      • [PATCH,RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Matthew Wilcox
      • [PATCH,RFC] PCI: deal with device incorrectly reporting I/O decoding being enabled   Dan Williams
• [PATCH 1/2] Colibri/PXA320: Fix AC97 ifdefs and include   Marek Vasut
  • [PATCH 1/2] Colibri/PXA320: Fix AC97 ifdefs and include   Eric Miao
    • [PATCH 1/2] Colibri/PXA320: Fix AC97 ifdefs and include   Daniel Mack
• [PATCH 2/2] Colibri/PXA320: Add UCB1400 touchscreen support   Marek Vasut
  • [PATCH 2/2] Colibri/PXA320: Add UCB1400 touchscreen support   Eric Miao
• Git pull request: Orion/Kirkwood fixes for 2.6.32-rc   Nicolas Pitre
• [PATCH] pxa: Add missing underscores in define   Eric Miao
• [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform   Russell King - ARM Linux
  • [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform   Catalin Marinas
    • [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform   Russell King - ARM Linux
      • [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform   Catalin Marinas
      • [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform   Russell King - ARM Linux
      • [PATCH 4/4] RealView: Add sparsemem support for the RealView PBX platform   Catalin Marinas
• IXP4xx repetitive 16-bit/32-bit I/O macros/inlines.   Krzysztof Halasa
  • IXP4xx repetitive 16-bit/32-bit I/O macros/inlines.   Karl Hiramoto
    • IXP4xx repetitive 16-bit/32-bit I/O macros/inlines.   Krzysztof Halasa
• [REPOST PATCH 0/3] MX21 USB Host Support   Martin Fuzzey
  • [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.   Martin Fuzzey
    • [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.   Greg KH
      • [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.   Martin Fuzzey
      • [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.   Greg KH
  • [REPOST PATCH 2/3] MXC: use DMA_BIT_MASK macro rather than hardcoded constants.   Martin Fuzzey
    • [REPOST PATCH 2/3] MXC: use DMA_BIT_MASK macro rather than hardcoded constants.   Uwe Kleine-König
  • [REPOST PATCH 3/3] MXC: add platform resources for i.MX21 USB host controller.   Martin Fuzzey
    • [REPOST PATCH 3/3] MXC: add platform resources for i.MX21 USB host controller.   Fabio Estevam
      • [REPOST PATCH 3/3] MXC: add platform resources for i.MX21 USB host controller.   Martin Fuzzey
• [PATCH] Use definition for cmpxchg swi   Russell King - ARM Linux
  • [PATCH] Use definition for cmpxchg swi   Nicolas Pitre
    • [PATCH] Use definition for cmpxchg swi   Russell King - ARM Linux
      • [PATCH] Use definition for cmpxchg swi   Nicolas Pitre
      • [PATCH] Use definition for cmpxchg swi   Russell King - ARM Linux
      • [PATCH] Use definition for cmpxchg swi   Jamie Lokier
      • [PATCH] Use definition for cmpxchg swi   Russell King - ARM Linux
      • [PATCH] Use definition for cmpxchg swi   Nicolas Pitre
      • [PATCH] Use definition for cmpxchg swi   Russell King - ARM Linux
      • [PATCH] Use definition for cmpxchg swi   Nicolas Pitre
• [PATCH] arm nomadik: Introduce plat-nomadik, MTU code re-organization   srinidhi kasagar
  • [PATCH] arm nomadik: Introduce plat-nomadik, MTU code re-organization   Russell King - ARM Linux
    • [PATCH] arm nomadik: Introduce plat-nomadik, MTU code re-organization   Alessandro Rubini
• [PATCH 01/17] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Ben Dooks
  • [PATCH 01/17] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Kyungmin Park
• [PATCH 07/17] ARM: S5PC1xx: add gpiolib and external/gpio interrupt support   Ben Dooks
• [PATCH 09/17] ARM: S5PC1xx: add platform helpers for s3c-fb device   Ben Dooks
• [PATCH] Update Samsung S5PC100 SoC support   Ben Dooks
• [PATCH] Allow platforms to control which PXA uarts are registered   Eric Miao
• [PATCH 1/3] [ARM] pxa: introduce   Eric Miao
• [PATCH 3/3] [ARM] pxa: make CPU_PXA* to be selectable hidden options   Eric Miao
• [PATCH 2/3] [ARM] pxa: select CPU_PXA310 for MACH_COLIBRI300   Eric Miao
• [PATCH 1/3] pxa: introduce CONFIG_MACH_ZYLONITE{300, 320} for CPU_PXA* removing   Eric Miao
• [PATCH 2/3] pxa: select CPU_PXA310 for MACH_COLIBRI300   Eric Miao
  • [PATCH 2/3] pxa: select CPU_PXA310 for MACH_COLIBRI300   Daniel Mack
    • [PATCH 2/3] pxa: select CPU_PXA310 for MACH_COLIBRI300   Eric Miao
• [PATCH 3/3] pxa: make CPU_PXA* to be selectable hidden options   Eric Miao
• orion/kirkwood pcie issue still open with rc6   Dieter Kiermaier
  • orion/kirkwood pcie issue still open with rc6   Simon Kagstrom
    • orion/kirkwood pcie issue still open with rc6   Dieter Kiermaier
      • orion/kirkwood pcie issue still open with rc6   Ronen Shitrit
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Dieter Kiermaier
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Lennert Buytenhek
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Dieter Kiermaier
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Lennert Buytenhek
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Dieter Kiermaier
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Dieter Kiermaier
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Lennert Buytenhek
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Dieter Kiermaier
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Lennert Buytenhek
      • orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)   Dieter Kiermaier
      • [PATCH] ARM: enable PCI bridges after assigning resources (was orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!))   Maxime Bizon
      • [PATCH] ARM: enable PCI bridges after assigning resources (was orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!))   Dieter Kiermaier
      • [PATCH] ARM: enable PCI bridges after assigning resources (was orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!))   Simon Kagstrom
      • [PATCH] ARM: enable PCI bridges after assigning resources (was orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!))   Dieter Kiermaier
      • [PATCH] ARM: enable PCI bridges after assigning resources (was orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!))   Lennert Buytenhek
      • [PATCH] ARM: enable PCI bridges after assigning resources (was orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!))   Maxime Bizon
• Experimental patch is missing AT91 board   suse auto
  • Experimental patch is missing AT91 board   Nicolas Ferre
• dream: fastboot getting protocol errors   Pavel Machek
  • dream: fastboot getting protocol errors   Pavel Machek
  • dream: fastboot getting protocol errors   Brian Swetland
    • dream: fastboot getting protocol errors   Pavel Machek
• htc dream: attempts at mmc and framebuffer support   Pavel Machek
  • htc dream: attempts at mmc and framebuffer support   Brian Swetland
• [PATCH v3 1/2] arm: a driver for on-chip ETM and ETB   Artem Bityutskiy
• [PATCH 1/2] qong: Add LCD display support   Anatolij Gustschin
  • [PATCH 2/2] qong: add mc13783 support   Anatolij Gustschin
• spitz battery driver   Pavel Machek
  • spitz battery driver   Eric Miao
    • spitz battery driver   Pavel Machek
      • spitz battery driver   Stanislav Brabec
      • spitz battery driver   Pavel Machek
• AT91 MCI SDIO transfers   Bart Cerneels
• [PATCH] mfd: rename 88pm8607 to 88pm860x in mfd   Haojian Zhuang
• [PATCH] mfd: rename 88pm8607 to 88pm860x in mfd   Haojian Zhuang
• [PATCH] backlight: enable backlight in 88pm860x   Haojian Zhuang
• [PATCH] backlight: enable backlight in 88pm860x   Haojian Zhuang
• [PATCH] backlight: enable backlight in 88pm860x   Haojian Zhuang
• [PATCH] arm: omap: Use resource_size   Tobias Klauser
  • [PATCH] arm: omap: Use resource_size   Tony Lindgren
    • [PATCH] arm: omap: Use resource_size   Tony Lindgren
• [PATCH] regulator: refresh 88pm8607 driver with updated api   Haojian Zhuang
• [PATCH] Add COH 901 318 DMA block driver v4   Linus Walleij
  • [PATCH] Add COH 901 318 DMA block driver v4   Sosnowski, Maciej
  • [PATCH] Add COH 901 318 DMA block driver v4   Dan Williams
• [PATCH] Use ST vendor enum instead of numeral   Linus Walleij
  • [PATCH] Use ST vendor enum instead of numeral   Jean-Christophe PLAGNIOL-VILLARD
• [PULL] pull request for fixes-s3c-2632-rc6   Ben Dooks
  • [PULL] pull request for fixes-s3c-2632-rc6   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Ben Dooks
  • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Kukjin Kim
    • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Kyungmin Park
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Harald Welte
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Marek Szyprowski
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Harald Welte
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Kyungmin Park
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Ben Dooks
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Ben Dooks
      • [PATCH] ARM: SAMSUNG: Add plat-samsung as starting point for plat-s3c* moves   Marek Szyprowski
• [PATCH] pxa: support PXA168 LCD platform dependent power on   Jun Nie
• [PATCH] pxa: fix offset setting at initialization   Jun Nie
• [PATCH] pxa: frame buffer support both pxa168 and pxa910   Jun Nie
• [PATCH]: S3C RTC driver: add support for S3C64xx   Maurus Cuelenaere
  • [PATCH]: S3C RTC driver: add support for S3C64xx   Ben Dooks
  • [PATCH]: S3C RTC driver: add support for S3C64xx   jassi brar
    • [PATCH]: S3C RTC driver: add support for S3C64xx   Maurus Cuelenaere
• [PATCH] pxa: support pxa168 LCD controller SPI operation   Jun Nie
• [PATCH V1 1/3] i2c: imx: check busy bit when START/STOP   Richard Zhao
• [PATCH] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register   Janusz Krzysztofik
• [PATCH] pxa: delete redundant vsync/hsync revert flag var.sync can cover its function   Jun Nie
• enabling EXT_WAKEUP interrupts on PXA3xx   Mike Rapoport
  • enabling EXT_WAKEUP interrupts on PXA3xx   Daniel Mack
    • enabling EXT_WAKEUP interrupts on PXA3xx   Eric Miao
      • enabling EXT_WAKEUP interrupts on PXA3xx   Eric Miao
      • enabling EXT_WAKEUP interrupts on PXA3xx   Mike Rapoport
      • enabling EXT_WAKEUP interrupts on PXA3xx   Eric Miao
• [PATCH] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
• [PATCH] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
• [PATCH 0/8] enable pxa168 LCD on two platform   Jun Nie
  • [PATCH 0/8] enable pxa168 LCD on two platform   Andrew Morton
    • [PATCH 0/8] enable pxa168 LCD on two platform   Randy Dunlap
      • [PATCH 0/8] enable pxa168 LCD on two platform   Geert Uytterhoeven
      • [PATCH 0/8] enable pxa168 LCD on two platform   Randy Dunlap
      • [PATCH 0/8] enable pxa168 LCD on two platform   Geert Uytterhoeven
      • [PATCH 0/8] enable pxa168 LCD on two platform   Randy Dunlap
    • [PATCH 0/8] enable pxa168 LCD on two platform   Eric Miao
• [PATCH 1/8] pxa: support pxa168 LCD controller SPI operation   Jun Nie
  • [PATCH 1/8] pxa: support pxa168 LCD controller SPI operation   Jun Nie
    • [PATCH 1/8] pxa: support pxa168 LCD controller SPI operation   Russell King - ARM Linux
• [PATCH 2/8] pxa: support PXA168 LCD platform dependent power on   Jun Nie
  • [PATCH 2/8] pxa: support PXA168 LCD platform dependent power on   Jun Nie
• [PATCH 3/8] pxa: fix offset setting at initialization   Jun Nie
  • [PATCH 3/8] pxa: fix offset setting at initialization   Jun Nie
• [PATCH 4/8] pxa: delete redundant vsync/hsync revert flag   Jun Nie
  • [PATCH 4/8] pxa: delete redundant vsync/hsync revert flag   Jun Nie
• [PATCH 5/8] pxa: frame buffer support both pxa168 and pxa910   Jun Nie
  • [PATCH 5/8] pxa: frame buffer support both pxa168 and pxa910   Jun Nie
• [PATCH 6/8] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
  • [PATCH 6/8] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
• [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
  • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
• [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
  • [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
    • [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Russell King - ARM Linux
• [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set   Paul Walmsley
  • [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set   Janusz Krzysztofik
• [PATCH] [ARM] pxa/cm-x300: add PWM backlight support   Igor Grinberg
  • [PATCH] [ARM] pxa/cm-x300: add PWM backlight support   Igor Grinberg
    • [PATCH] [ARM] pxa/cm-x300: add PWM backlight support   Eric Miao
• Runtime code modification fails on arm   Papalagi Pakeha
  • Runtime code modification fails on arm   Jamie Lokier
  • Runtime code modification fails on arm   Matthieu CASTET
  • Runtime code modification fails on arm   Russell King - ARM Linux
    • Runtime code modification fails on arm   Papalagi Pakeha
      • Runtime code modification fails on arm   Papalagi Pakeha
• [Proposal] [PATCH] generic clock framework   Francesco VIRLINZI
• [PATCH] Make MIPS dynamic clocksource/clockevent clock code generic v2   Thomas Gleixner
• s3cmci: convert missed s3c2410_gpio calls to gpiolib calls   Ben Dooks
• [PATCHv2] S3C RTC driver: add support for S3C64xx   Maurus Cuelenaere
  • [PATCHv2] S3C RTC driver: add support for S3C64xx   Maurus Cuelenaere
• S3C64xx GPIO EINT problem   Maurus Cuelenaere
• [PATCH] led: enable led in 88pm860x   Haojian Zhuang
• [PATCH] led: enable led in 88pm860x   Haojian Zhuang
• [PATCH] led: enable led in 88pm860x   Haojian Zhuang
• [patch 0/3] S3C24XX Simtec updates for post 2.6.32   Ben Dooks
  • [patch 1/3] S3C24XX: machine support for Simtec Audio   Ben Dooks
  • [patch 2/3] OSIRIS: DVS (Dynamic Voltage Scaling) supoort.   Ben Dooks
  • [patch 3/3] S3C24XX: Add documentation for arch/arm/plat-s3c24xx/include/plat/mci.h   Ben Dooks
• S3C24XX device updates and machine fixes   Ben Dooks
• [PATCH 1/4] H1940: Correct name of the local platform devices for LED and Bluetooth   Ben Dooks
  • [PATCH 2/4] S3C: Add NAND device platform data set call   Ben Dooks
• [PATCH 3/4] AT2440EVB: Remove duplicated s3c_device_sdi.name set   Ben Dooks
  • [PATCH 4/4] N30: Use s3c_i2c0_set_platdata() to set I2C platform data   Ben Dooks
• [PATCH 0/8] Omap fixes for v2.6.32-rc6   Tony Lindgren
  • [PATCH 1/8] omap: Fix race condition in omap dma driver   Tony Lindgren
  • [PATCH 2/8] omap: Use resource_size   Tony Lindgren
    • [PATCH 2.5/8] omap: Fix omapfb/lcdc on OMAP1510 broken when PM set   Tony Lindgren
  • [PATCH 3/8] omap1: Amstrad Delta defconfig fixes   Tony Lindgren
    • [PATCH 3/8] omap1: Amstrad Delta defconfig fixes   Janusz Krzysztofik
      • [PATCH 3/8] omap1: Amstrad Delta defconfig fixes   Tony Lindgren
  • [PATCH 4/8] omap3: pandora: Fix keypad keymap   Tony Lindgren
  • [PATCH 5/8] omap3: beagle: Fix USB host port power control   Tony Lindgren
  • [PATCH 6/8] omap3: 3430sdp: Enable Linux Regulator framework   Tony Lindgren
  • [PATCH 7/8] omap: update Pandora defconfig   Tony Lindgren
  • [PATCH 8/8] omap3: Decrease cpufreq transition latency   Tony Lindgren
• [PATCH 1/2] S3C6410 I2S: Added 'iis' clock for I2S_v4   Jassi Brar
  • [PATCH 1/2] S3C6410 I2S: Added 'iis' clock for I2S_v4   Mark Brown
• [PATCH 2/2] S3C6410 I2S: Added audio-bus for I2S_v4   Jassi Brar
• [PATCH 1/2] S3C64XX PCM: Define PCM Controller base registers   Jassi Brar
• [PATCH 2/2] S3C64XX PCM: Added PCLK clock source for the PCM controllers   Jassi Brar
• [Proposal] [PATCH] generic clock framework   Francesco VIRLINZI
• drivers/rtc/rtc-pl031.c uses __raw_readl()?   Linus Walleij
  • drivers/rtc/rtc-pl031.c uses __raw_readl()?   Linus Walleij
    • drivers/rtc/rtc-pl031.c uses __raw_readl()?   Russell King - ARM Linux
      • drivers/rtc/rtc-pl031.c uses __raw_readl()?   Russell King - ARM Linux
      • drivers/rtc/rtc-pl031.c uses __raw_readl()?   Russell King - ARM Linux
    • drivers/rtc/rtc-pl031.c uses __raw_readl()?   Uwe Kleine-König
      • drivers/rtc/rtc-pl031.c uses __raw_readl()?   Leo (Hao) Chen
• [PATCH] [ARM] pxa3xx: add EXT_WAKEUP interrupts handling   Mike Rapoport
  • [PATCH] [ARM] pxa3xx: add EXT_WAKEUP interrupts handling   Eric Miao
• Status of Dream series   Pavel Machek
  • Status of Dream series   Daniel Walker
    • Status of Dream series   Pavel Machek
      • Status of Dream series   Daniel Walker
      • Status of Dream series   Pavel Machek
      • Status of Dream series   Pavel Machek
      • Status of Dream series   Daniel Walker
      • Status of Dream series   Pavel Machek
  • Status of Dream series   Russell King - ARM Linux
    • Status of Dream series   Pavel Machek
• atmel_serial losing characters under libmodbus   Josef Holzmayr
  • atmel_serial losing characters under libmodbus   christian pellegrin
    • atmel_serial losing characters under libmodbus   Josef Holzmayr
      • atmel_serial losing characters under libmodbus   Steve Chen
• [PATCH] ARM: fix bug of checking on signed return value using unsigned statement in w90p910 platform   Wan ZongShun
• osd_initiator.c fails to build on ARM with old ABI   Martin Michlmayr
• drivers/mtd/nand/orion_nand.c build failure with old ABI   Martin Michlmayr
  • drivers/mtd/nand/orion_nand.c build failure with old ABI   Nicolas Pitre
    • drivers/mtd/nand/orion_nand.c build failure with old ABI   Simon Kagstrom
• [PATCH] pxa: make index mfp unsigned in mfp_read() and write()   Roel Kluin
  • [PATCH] pxa: make index mfp unsigned in mfp_read() and write()   Eric Miao
    • [PATCH] pxa: make index mfp unsigned in mfp_read() and write()   Roel Kluin
• Status of bzip2 and lzma kernel compression for ARM?   Martin Michlmayr
  • Status of bzip2 and lzma kernel compression for ARM?   Albin Tonnerre
    • Status of bzip2 and lzma kernel compression for ARM?   Martin Michlmayr
      • Status of bzip2 and lzma kernel compression for ARM?   Alain Knaff
• [PATCH] s3c64xx: Fix USB HSOTG compilation   Maurus Cuelenaere
  • [PATCH] s3c64xx: Fix USB HSOTG compilation   Maurus Cuelenaere
• [PATCH] s3c64xx: Add other group 0 EINTs   Maurus Cuelenaere
• [PATCH] omap: Fix omapfb/lcdc on OMAP1510 broken when PM set   Janusz Krzysztofik
• [REGRESSION] 2eca40a8 breaks StrongARM compilation   Dmitry Artamonow
  • [REGRESSION] 2eca40a8 breaks StrongARM compilation   Russell King - ARM Linux
• Submitting patches for new LPC313x machine support   Durgesh Pattamatta
  • Submitting patches for new LPC313x machine support   Paulius Zaleckas
• [PATCH 00/10] omap am35xx, 3630, 7xx cpu changes for merge window after 2.6.32   Tony Lindgren
  • [PATCH 01/10] omap: Eliminate OMAP_MAX_NR_PORTS   Tony Lindgren
  • [PATCH 02/10] omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL config   Tony Lindgren
  • [PATCH 03/10] omap1: mmc: Add platform init for omap7xx   Tony Lindgren
  • [PATCH 04/10] omap1: omap_udc: Add clocking and disable vbus sense for omap7xx   Tony Lindgren
  • [PATCH 05/10] omap3: Runtime detection of Si features   Tony Lindgren
  • [PATCH 06/10] omap3: Runtime detection of OMAP35x devices   Tony Lindgren
  • [PATCH 07/10] omap3: Introduce OMAP3630   Tony Lindgren
  • [PATCH 08/10] omap3: 3630: update is_chip variable   Tony Lindgren
  • [PATCH 09/10] omap3: AM35xx: Runtime detection of the device   Tony Lindgren
  • [PATCH 10/10] omap3: AM35xx: Initialize omap_chip bits   Tony Lindgren
• [PATCH] Remove __raw_* accessors from PL031 RTC   Linus Walleij
  • [PATCH] Remove __raw_* accessors from PL031 RTC   Uwe Kleine-König
    • [rtc-linux] Re: [PATCH] Remove __raw_* accessors from PL031 RTC   Linus Walleij
• [PATCH] Update Samsung S5PC100 SoC support   Marek Szyprowski
  • [PATCH 01/18] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Marek Szyprowski
    • [PATCH 02/18] ARM: S5PC1XX: registers rename   Marek Szyprowski
      • [PATCH 03/18] ARM: S5PC1XX: clock registers rename   Marek Szyprowski
      • [PATCH 04/18] ARM: S5PC1XX: clocks reimplementation   Marek Szyprowski
      • [PATCH 05/18] ARM: S5PC1XX: add GPIO L banks to register definition   Marek Szyprowski
      • [PATCH 06/18] ARM: S5PC1XX: GPIO registers rename   Marek Szyprowski
      • [PATCH 07/18] ARM: S5PC1xx: add gpiolib and external/gpio interrupt support   Marek Szyprowski
      • [PATCH 08/18] ARM: S5PC1XX: add cpu idle and system reset support   Marek Szyprowski
      • [PATCH 09/18] ARM: S3C: Prepare s3c64xx-specific s3c-fb register definition for reuse   Marek Szyprowski
      • [PATCH 09/18] ARM: S3C: Prepare s3c64xx-specific s3c-fb register definition for reuse   Ben Dooks
      • [PATCH 09/18] ARM: S3C: Prepare s3c64xx-specific s3c-fb register definition for reuse   Marek Szyprowski
      • [PATCH 07/18] ARM: S5PC1xx: add gpiolib and external/gpio interrupt support   Ben Dooks
      • [PATCH 07/18] ARM: S5PC1xx: add gpiolib and external/gpio interrupt support   Marek Szyprowski
    • [PATCH 01/18] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Ben Dooks
      • [PATCH 01/18] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Russell King - ARM Linux
      • [PATCH 01/18] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Marek Szyprowski
  • [PATCH] Update Samsung S5PC100 SoC support   Ben Dooks
  • [PATCH] Update Samsung S5PC100 SoC support   Ben Dooks
    • [PATCH] Update Samsung S5PC100 SoC support   Marek Szyprowski
  • [PATCH] Update Samsung S5PC100 SoC support   Russell King - ARM Linux
• [PATCH 10/18] ARM: S5PC1xx: add platform helpers for s3c-fb device   Marek Szyprowski
• [PATCH 11/18] SMDKC100: enable S3C FrameBuffer   Marek Szyprowski
  • [PATCH 12/18] drivers: fb: enable S3C FrameBuffer on S5PC1XX platform   Marek Szyprowski
    • [PATCH 13/18] ARM: S5PC1xx: add platform helpers for i2c adapter devices   Marek Szyprowski
    • [PATCH 12/18] drivers: fb: enable S3C FrameBuffer on S5PC1XX platform   Ben Dooks
  • [PATCH 11/18] SMDKC100: enable S3C FrameBuffer   Ben Dooks
• [PATCH 14/18] SMDKC100: add I2C0 and I2C1 buses support   Marek Szyprowski
  • [PATCH 15/18] drivers: i2c: s3c2410-i2c also on S5PC1XX platform   Marek Szyprowski
    • [PATCH 16/18] ARM: S5PC1xx: add platform helpers for SDHCI host controllers   Marek Szyprowski
      • [PATCH 17/18] SMDKC100: add SDHCI controllers 0, 1 and 2 support   Marek Szyprowski
      • [PATCH 16/18] ARM: S5PC1xx: add platform helpers for SDHCI host controllers   Ben Dooks
    • [PATCH 15/18] drivers: i2c: s3c2410-i2c also on S5PC1XX platform   Ben Dooks
• [PATCH 18/18] drivers: MMC: enable SDHCI-S3C on S5PC1XX platform   Marek Szyprowski
  • [PATCH 18/18] drivers: MMC: enable SDHCI-S3C on S5PC1XX platform   Ben Dooks
• MXC patches for next merge window   Sascha Hauer
  • [PATCH 1/9] MXC NFC: Add the clock resource to support NFC in i.MX35   Sascha Hauer
    • [PATCH 2/9] MXC NFC: Fix NFCs address area on i.MX35   Sascha Hauer
      • [PATCH 3/9] pca100: Add board to uncompress.h   Sascha Hauer
      • [PATCH 4/9] pca100: use correct irq initialisation function   Sascha Hauer
      • [PATCH 2/9] MXC NFC: Fix NFCs address area on i.MX35   Magnus Lilja
      • [PATCH 2/9] MXC NFC: Fix NFCs address area on i.MX35   Sascha Hauer
  • MXC patches for next merge window   Sascha Hauer
• [PATCH 5/9] pcm043: Add NAND support   Sascha Hauer
  • [PATCH 6/9] i.MX2: Add sound (ssi) resources   Sascha Hauer
    • [PATCH 7/9] i.MX3: Add sound (ssi) resources   Sascha Hauer
      • [PATCH 8/9] MXC: Add a digital audio multiplexer (DAM) driver   Sascha Hauer
      • [PATCH 9/9] i.MX35: Fix audmux clock   Sascha Hauer
      • [PATCH 8/9] MXC: Add a digital audio multiplexer (DAM) driver   Mark Brown
      • [PATCH 8/9] MXC: Add a digital audio multiplexer (DAM) driver   Sascha Hauer
      • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Sascha Hauer
      • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Russell King - ARM Linux
      • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Sascha Hauer
      • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   javier Martin
  • [PATCH 5/9] pcm043: Add NAND support   Fabio Estevam
    • [PATCH 5/9] pcm043: Add NAND support   Sascha Hauer
• [PATCH] ARM: Prefix hex numbers in /proc/cpuinfo   Daniel Mack
• [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Daniel Mack
  • [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Alessandro Rubini
    • [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Daniel Mack
  • [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Russell King - ARM Linux
    • [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Daniel Mack
      • [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Russell King - ARM Linux
      • [PATCH] ARM: Prefix revision number in /proc/cpuinfo   Daniel Mack
• [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge is present   Dieter Kiermaier
  • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge?is present   Alexander Clouter
    • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge?is present   Dieter Kiermaier
      • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe?bridge?is present   Alexander Clouter
      • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge?is present   Simon Kagstrom
  • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge is present   Lennert Buytenhek
    • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge is present   Dieter Kiermaier
  • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge is present   Russell King - ARM Linux
    • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge is present   Dieter Kiermaier
      • [PATCH] [ARM] Kirkwood: Prevent kernel from crashing if PCIe bridge is present   Russell King - ARM Linux
• NAND: failure reported with mtd_oobtest(read delay violated)   Govindarajan, Sriramakrishnan
  • NAND: failure reported with mtd_oobtest(read delay violated)   Russell King - ARM Linux
    • NAND: failure reported with mtd_oobtest(read delay violated)   Govindarajan, Sriramakrishnan
  • NAND: failure reported with mtd_oobtest(read delay violated)   Artem Bityutskiy
• ARM: big performance waste in memcpy_{from,to}io   Hubert Feurstein
  • ARM: big performance waste in memcpy_{from,to}io   Alexander Clouter
    • ARM: big performance waste in memcpy_{from,to}io   Hubert Feurstein
      • ARM: big performance waste in memcpy_{from,to}io   Russell King - ARM Linux
      • ARM: big performance waste in memcpy_{from,to}io   Andy Green
      • ARM: big performance waste in memcpy_{from,to}io   Bill Gatliff
      • [RFC PATCH] ARM: add (experimental) alternative memcpy_{from, to}io() and memset_io()   Hubert Feurstein
      • ARM: big performance waste in memcpy_{from,to}io   Hubert Feurstein
  • ARM: big performance waste in memcpy_{from,to}io   Ben Dooks
• [PATCH] input: enable touch on 88pm860x   Haojian Zhuang
• [PATCH] input: enable touch on 88pm860x   Haojian Zhuang
• PCI hotplug supported on ARM (Kirkwood)?   Dieter Kiermaier
  • PCI hotplug supported on ARM (Kirkwood)?   Alexander Clouter
    • PCI hotplug supported on ARM (Kirkwood)? - fakephp?   Dieter Kiermaier
      • PCI hotplug supported on ARM (Kirkwood)? - fakephp?   Dieter Kiermaier
• [GIT PULL] omap-fixes for v2.6.32-rc6   Tony Lindgren
• [PATCH] COH 901 331 fixes   Linus Walleij
• Soft reset problems   Ricardo Martínez
• [PATCH v3] omap3-iommu: reorganize   Felipe Contreras
• [PATCH v3 2/4] Add support for LZO-compressed kernels for ARM   Martin Michlmayr
• [PATCH] [ARM] IMX: don't disable the uart clock if DEBUG_LL uses it   Uwe Kleine-König
  • [PATCH] [ARM] IMX: don't disable the uart clock if DEBUG_LL uses it   Sascha Hauer
    • [PATCH] [ARM] IMX: don't disable the uart clock if DEBUG_LL uses it   Uwe Kleine-König
      • [PATCH] [ARM] IMX: don't disable the uart clock if DEBUG_LL uses it   Uwe Kleine-König
• [PATCH 00/14] Omap low-level device init updates for 2.6.33   Tony Lindgren
  • [PATCH 01/14] omap: update plat/usb.h to allow ehci driver to build   Tony Lindgren
  • [PATCH 02/14] omap: Add platform init code for EHCI driver   Tony Lindgren
  • [PATCH 03/14] omap: iommu: avoid remapping if it's been mapped in MPU side   Tony Lindgren
  • [PATCH 04/14] omap: iovmm: remove cache flush operation   Tony Lindgren
  • [PATCH 05/14] omap: iommu: reorganize   Tony Lindgren
  • [PATCH 06/14] omap: McBSP: Do not use extensive spin locks for dma_op_mode   Tony Lindgren
  • [PATCH 07/14] omap3630: Add HSMMC related checks   Tony Lindgren
  • [PATCH 08/14] omap3630: Configure HSMMC1 to 4-bit   Tony Lindgren
  • [PATCH 09/14] omap3630: Set omap3630 MMC1 I/O speed to 52Mhz   Tony Lindgren
  • [PATCH 10/14] omap3: HSMMC2 8-bit mux configuration   Tony Lindgren
  • [PATCH 11/14] omap3: evm: make HSMMC driver built-in   Tony Lindgren
  • [PATCH 12/14] omap3: move check_revision above check_features   Tony Lindgren
    • [PATCH 12/14] omap3: move check_revision above check_features, v2   Tony Lindgren
  • [PATCH 13/14] omap3: keep SoC features on the same line   Tony Lindgren
  • [PATCH 14/14] omap3: drop all IVA-related address base definitions   Tony Lindgren
• [PATCH] pxa: support pxa168 LCD controller SPI operation   Jun Nie
• [PATCH] arm: Iomega ix4-200d support   Eric Sandeen
  • [PATCH] arm: Iomega ix4-200d support   Martin Michlmayr
    • [PATCH] arm: Iomega ix4-200d support   Eric Sandeen
• [PATCH] serial21285: fix disable_irq-from-interrupt-handler deadlock   Simon Kagstrom
  • [PATCH] serial21285: fix disable_irq-from-interrupt-handler deadlock   Russell King - ARM Linux
    • [PATCH] serial21285: fix disable_irq-from-interrupt-handler deadlock   Simon Kagstrom
  • [PATCH] serial21285: fix disable_irq-from-interrupt-handler deadlock   Ben Dooks
• Linux on ARM926EJ: Software reset problems   Ricardo Martínez
  • Linux on ARM926EJ: Software reset problems   Tonyliu
• [PATCH 01/10] mfd split 88pm8607 driver   Haojian Zhuang
• [PATCH 00/10] update 88pm860x mfd driver   Haojian Zhuang
• [PATCH 02/10] support 88pm8606 in 860x driver   Haojian Zhuang
  • [PATCH 02/10] support 88pm8606 in 860x driver   Samuel Ortiz
    • [PATCH 02/10] support 88pm8606 in 860x driver   Haojian Zhuang
      • [PATCH 02/10] support 88pm8606 in 860x driver   Samuel Ortiz
      • [PATCH 02/10] support 88pm8606 in 860x driver   Haojian Zhuang
      • [PATCH 02/10] support 88pm8606 in 860x driver   Samuel Ortiz
• [PATCH 03/10] mfd rename 8607.h to 860x.h   Haojian Zhuang
• [PATCH 04/10] mfd rename 88pm8607 to 88pm860x in mfd   Haojian Zhuang
• [PATCH 05/10] mfd add irq support in 88pm860x   Haojian Zhuang
  • [PATCH 05/10] mfd add irq support in 88pm860x   Mark Brown
  • [PATCH 05/10] mfd add irq support in 88pm860x   Dmitry Torokhov
    • [PATCH 05/10] mfd add irq support in 88pm860x   Haojian Zhuang
• [PATCH 06/10] mfd add subdevs in 88pm860x   Haojian Zhuang
  • [PATCH 06/10] mfd add subdevs in 88pm860x   Dmitry Torokhov
    • [PATCH 06/10] mfd add subdevs in 88pm860x   Haojian Zhuang
      • [PATCH 06/10] mfd add subdevs in 88pm860x   Dmitry Torokhov
      • [PATCH 06/10] mfd add subdevs in 88pm860x   Haojian Zhuang
      • [PATCH 06/10] mfd add subdevs in 88pm860x   Haojian Zhuang
• [PATCH 07/10] backlight: enable backlight in 88pm860x   Haojian Zhuang
  • [PATCH 07/10] backlight: enable backlight in 88pm860x   Dmitry Torokhov
    • [PATCH 07/10] backlight: enable backlight in 88pm860x   Haojian Zhuang
      • [PATCH 07/10] backlight: enable backlight in 88pm860x   Haojian Zhuang
• [PATCH 08/10] led: enable led in 88pm860x   Haojian Zhuang
  • [PATCH 08/10] led: enable led in 88pm860x   Dmitry Torokhov
    • [PATCH 08/10] led: enable led in 88pm860x   Haojian Zhuang
      • [PATCH 08/10] led: enable led in 88pm860x   Haojian Zhuang
• [PATCH 09/10] input: enable touch on 88pm860x   Haojian Zhuang
  • [PATCH 09/10] input: enable touch on 88pm860x   Mark Brown
  • [PATCH 09/10] input: enable touch on 88pm860x   Dmitry Torokhov
    • [PATCH 09/10] input: enable touch on 88pm860x   Haojian Zhuang
      • [PATCH 09/10] input: enable touch on 88pm860x   Dmitry Torokhov
      • [PATCH 09/10] input: enable touch on 88pm860x   Haojian Zhuang
      • [PATCH 09/10] input: enable touch on 88pm860x   Dmitry Torokhov
      • [PATCH 09/10] input: enable touch on 88pm860x   Haojian Zhuang
• [PATCH 10/10] regulator: refresh 88pm8607 driver with updated api   Haojian Zhuang
  • [PATCH 10/10] regulator: refresh 88pm8607 driver with updated api   Liam Girdwood
    • [PATCH 10/10] regulator: refresh 88pm8607 driver with updated api   Haojian Zhuang
• [PATCH] pxafb: added transparency field to pxafb_mode_info struct   pieterg
• [PATCH v2 26/32] OMAP3: PM debug: allow runtime toggle of PM features   Gopinath, Thara
  • [PATCH v2 26/32] OMAP3: PM debug: allow runtime toggle of PM features   Kevin Hilman
• ARM926 Software reset problems   Ricardo Martínez
  • ARM926 Software reset problems   Russell King - ARM Linux
    • ARM926 Software reset problems   Ricardo Martínez
      • ARM926 Software reset problems   Russell King - ARM Linux
      • ARM926 Software reset problems   Dieter Kiermaier
      • ARM926 Software reset problems   Ricardo Martínez
      • ARM926 Software reset problems   Russell King - ARM Linux
• [RFC 11/11] ARM: avoid flushing I-cache in flush_cache_mm()   Gilles Chanteperdrix
  • [RFC 11/11] ARM: avoid flushing I-cache in flush_cache_mm()   Russell King
    • [RFC 11/11] ARM: avoid flushing I-cache in flush_cache_mm()   Gilles Chanteperdrix
• [PATCH] mfd: add irq support in 88pm860x   Haojian Zhuang
• [PATCH] mfd: add irq support in 88pm860x   Haojian Zhuang
• [PATCH] mfd: append subdevs in 88pm860x   Haojian Zhuang
• New mach and platform support : lpc32xx   Kevin Wells
• [PATCH] omap3: move check_revision above check_features   Nishanth Menon
• [patch 0/3] Copyright fixes for Simtec written files   Ben Dooks
  • [patch 1/3] ARM: S3C: Fix Simtec copyright statements in Documentation/S3C24XX   Ben Dooks
  • [patch 2/3] ARM: S3C: Update Simtec copyright statements from , to -   Ben Dooks
  • [patch 3/3] ARM: S3C: Update Simtec copyright statements from , to - [2]   Ben Dooks
• Git pull request: another Kirkwood fix for 2.6.32-rc7   Nicolas Pitre
• [PATCH] omap3evm: Add board revision function   Ajay Kumar Gupta
• [PATCH] omap: Fix keymap for zoom2 according to matrix keypad framwork   Vimal Singh
• [PATCH] omap: zoom3: defconfig creation   vikram pandita
• [PATCH] omap: zoom2: update defconfig for LL_DEBUG_NONE   vikram pandita
• [RFC][PATCH] ARM: OMAP: McBSP: Use register cache   Janusz Krzysztofik
• Kernel Panic while booting arm-pb1176   abhijeet tripathi
  • Kernel Panic while booting arm-pb1176   Russell King - ARM Linux
• Kernel Panic while booting arm-pb1176   abhijeet tripathi
• Kernel Panic while booting arm-pb1176   Russell King - ARM Linux
  • Kernel Panic while booting arm-pb1176   abhijeet tripathi
• [PATCH] Convert viper to use plat_serial8250_port irqflags field   Marc Zyngier
• [PATCH 0/3] Support for the Arcom Zeus SBC   Marc Zyngier
  • [PATCH 1/3] Basic support for Arcom Zeus SBC   Marc Zyngier
    • [PATCH 1/3] Basic support for Arcom Zeus SBC   Daniel Mack
      • [PATCH 1/3] Basic support for Arcom Zeus SBC   Marc Zyngier
  • [PATCH 2/3] Make Viper pcmcia support more generic to support Zeus as well   Marc Zyngier
  • [PATCH 3/3] Default configuration for Arcom Zeus SBC   Marc Zyngier
• [PATCH] hx4700: fix hx4700 touchscreen pressure values   Paul Parsons
  • [PATCH] hx4700: fix hx4700 touchscreen pressure values   Eric Miao
  • [PATCH] hx4700: fix hx4700 touchscreen pressure values   Pavel Machek
• [PATCH 0/2] Support for the Arcom Zeus SBC, #2   Marc Zyngier
  • [PATCH 1/2] Basic support for Arcom Zeus SBC   Marc Zyngier
  • [PATCH 2/2] Make Viper pcmcia support more generic to support Zeus   Marc Zyngier
  • [PATCH 0/2] Support for the Arcom Zeus SBC, #2   Eric Miao
    • [PATCH 0/2] Support for the Arcom Zeus SBC, #2   Marc Zyngier
      • [PATCH 0/2] Support for the Arcom Zeus SBC, #2   Eric Miao
      • [PATCH 0/2] Support for the Arcom Zeus SBC, #2   Marc Zyngier
      • [PATCH 0/2] Support for the Arcom Zeus SBC, #2   Eric Miao
• [PATCH v1] MXC: Add SPI and MC13783 support for i.MX31 Litekit board.   Magnus Lilja
• IXP4xx: Indirect PCI MMIO compile failure   Krzysztof Halasa
  • IXP4xx: Indirect PCI MMIO compile failure   Russell King - ARM Linux
    • IXP4xx: Indirect PCI MMIO compile failure   Krzysztof Halasa
      • IXP4xx: Indirect PCI MMIO compile failure   Russell King - ARM Linux
      • IXP4xx: Indirect PCI MMIO compile failure   Krzysztof Halasa
      • IXP4xx: Indirect PCI MMIO compile failure   Krzysztof Halasa
      • IXP4xx: Indirect PCI MMIO compile failure   Krzysztof Halasa
      • IXP4xx: Indirect PCI MMIO compile failure and fix   Krzysztof Halasa
• [PATCH] ARM: Introduce HAVE_IOREAD_AND_IOWRITE macro.   Krzysztof Halasa
  • IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity. Re: (to fool the list server)   Krzysztof Halasa
  • IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*. Re: nothing   Krzysztof Halasa
  • [PATCH] ARM: Introduce HAVE_IOREAD_AND_IOWRITE macro.   Russell King - ARM Linux
    • [PATCH] ARM: Introduce HAVE_IOREAD_AND_IOWRITE macro.   Krzysztof Halasa
      • [PATCH] ARM: Introduce HAVE_IOREAD_AND_IOWRITE macro.   Russell King - ARM Linux
      • [PATCH] ARM: Introduce HAVE_IOREAD_AND_IOWRITE macro.   Krzysztof Halasa
• [PATCH v2] SA1100: h3100/h3600: emit messages on failed gpio_request   Dmitry Artamonow
• [RFC][PATCH] Add interrupt handling capability to pca953x   Marc Zyngier
  • [RFC][PATCH] Add interrupt handling capability to pca953x   Eric Miao
• IXP4xx: unneeded #include platform-specific include files?   Krzysztof Halasa
  • IXP4xx: unneeded #include platform-specific include files?   Mikael Pettersson
    • IXP4xx: unneeded #include platform-specific include files?   Imre Kaloz
      • IXP4xx: unneeded #include platform-specific include files?   Krzysztof Halasa
      • IXP4xx: unneeded #include platform-specific include files?   Imre Kaloz
      • IXP4xx: unneeded #include platform-specific include files?   Krzysztof Halasa
      • IXP4xx: unneeded #include platform-specific include files?   Imre Kaloz
      • IXP4xx: unneeded #include platform-specific include files?   Krzysztof Halasa
      • IXP4xx: unneeded #include platform-specific include files?   Imre Kaloz
      • IXP4xx: unneeded #include platform-specific include files?   Krzysztof Halasa
      • IXP4xx: unneeded #include platform-specific include files?   Imre Kaloz
      • IXP4xx: unneeded #include platform-specific include files?   Krzysztof Halasa
  • IXP4xx: unneeded #include platform-specific include files?   Mike Westerhof
• [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Dmitry Artamonow
  • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Russell King - ARM Linux
    • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Dmitry Artamonow
      • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Russell King - ARM Linux
      • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Thomas Kunze
      • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Russell King - ARM Linux
      • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Thomas Kunze
      • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Russell King - ARM Linux
      • [PATCH 00/20] iPAQ h3100/h3600 work for 2.6.33   Thomas Kunze
• IXP4XX 64MB   Krzysztof Halasa
• kernel panic - Attempted to kill init   abhijeet tripathi
  • kernel panic - Attempted to kill init   Aneesh Bhasin
  • kernel panic - Attempted to kill init   Daniel Mack
  • kernel panic - Attempted to kill init   Sebastian Heutling
    • kernel panic - Attempted to kill init   abhijeet tripathi
• ARM kirkwood: how to run kirkwood_pcie_init() from kernel module   Dieter Kiermaier
  • ARM kirkwood: how to run kirkwood_pcie_init() from kernel module   saeed bishara
    • ARM kirkwood: how to run kirkwood_pcie_init() from kernel module   Dieter Kiermaier
• [PATCH 0/8] enable pxa168 LCD on two platform   Jun Nie
• [PATCH 1/8] pxa: support pxa168 LCD controller SPI operation   Jun Nie
• [PATCH 2/8] pxa: support PXA168 LCD platform dependent power on   Jun Nie
• [PATCH 3/8] pxa: fix offset setting at initialization   Jun Nie
• [PATCH 4/8] pxa: delete redundant vsync/hsync revert flag   Jun Nie
• [PATCH 5/8] pxa: frame buffer support both pxa168 and pxa910   Jun Nie
• [PATCH 6/8] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
  • [PATCH 6/8] pxa: add gpio expander on pxa168 aspenite platform   Jun Nie
• [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
  • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Eric Miao
    • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
      • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Eric Miao
      • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
      • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Eric Miao
      • [PATCH 7/8] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
• [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
  • [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
    • [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Russell King - ARM Linux
      • [PATCH 8/8] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
• [GIT PULL] Patches for 2.6.33   Catalin Marinas
  • [GIT PULL] Patches for 2.6.33   Russell King - ARM Linux
    • [GIT PULL] Patches for 2.6.33   Catalin Marinas
• [RFC 10/11] ARM: arrange for flush_cache_range() to always flush the I-cache   Catalin Marinas
  • [RFC 10/11] ARM: arrange for flush_cache_range() to always flush the I-cache   Russell King - ARM Linux
    • [RFC 10/11] ARM: arrange for flush_cache_range() to always flush the I-cache   Nicolas Pitre
      • [RFC 10/11] ARM: arrange for flush_cache_range() to always flush the I-cache   Russell King - ARM Linux
      • [RFC 10/11] ARM: arrange for flush_cache_range() to alwaysflush the I-cache   Catalin Marinas
      • [RFC 10/11] ARM: arrange for flush_cache_range() to alwaysflush the I-cache   Russell King - ARM Linux
      • [RFC 10/11] ARM: arrange for flush_cache_range() toalwaysflush the I-cache   Catalin Marinas
      • [RFC 10/11] ARM: arrange for flush_cache_range() toalwaysflush the I-cache   Russell King - ARM Linux
  • [RFC 10/11] ARM: arrange for flush_cache_range() to always flush the I-cache   Dirk Behme
• [PATCH 0/3] OMAP clock and PM architecture fixes for 2.6.32-rc6   Paul Walmsley
  • [PATCH 1/3] OMAP3 clock: Fix the DPLL freqsel computations   Paul Walmsley
• [PATCH 2/3] OMAP3: Clock: Fixed dpll3_m2x2 rate calculation   Paul Walmsley
• [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Paul Walmsley
  • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Russell King - ARM Linux
    • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Paul Walmsley
      • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Pandita, Vikram
      • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Tony Lindgren
      • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Tony Lindgren
      • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors   Paul Walmsley
• [GIT PULL] AT91 board fix for 2.6.32   Nicolas Ferre
• [GIT PULL] AT91 Kconfig rework   Nicolas Ferre
  • [GIT PULL] AT91 Kconfig rework   Russell King - ARM Linux
    • [GIT PULL] AT91 Kconfig rework   Nicolas Ferre
• [PATCH] mfd: append subdev into 88pm860x driver   Haojian Zhuang
• [PATCH] Convert viper to use plat_serial8250_port irqflags field   Eric Miao
• submitting new ARM platforms   Kevin Wells
• submitting new ARM platforms   Kevin Wells
  • submitting new ARM platforms   Russell King - ARM Linux
• [GIT PULL] pxa: fixes for v2.6.32-rc7   Eric Miao
• [PATCH 00/25] imx cleanups   Uwe Kleine-König
  • [PATCH 01/25] imx: reorder mx2x.h   Uwe Kleine-König
  • [PATCH 00/25] imx cleanups   Sascha Hauer
• [PATCH 02/25] imx: reorder mx21.h   Uwe Kleine-König
  • [PATCH 03/25] imx: reorder mx27.h   Uwe Kleine-König
    • [PATCH 04/25] imx: reorder mx3x.h   Uwe Kleine-König
      • [PATCH 05/25] imx: add namespace prefixes for symbols in mx2x.h   Uwe Kleine-König
• [PATCH 06/25] imx: add namespace prefixes for symbols in mx21.h   Uwe Kleine-König
  • [PATCH 07/25] imx: add namespace prefixes for symbols in mx27.h   Uwe Kleine-König
• [PATCH 08/25] imx: add namespace prefixes for symbols in mx3x.h   Uwe Kleine-König
  • [PATCH 09/25] imx: add namespace prefixes for symbols in mx31.h   Uwe Kleine-König
• [PATCH 10/25] imx: add namespace prefixes for symbols in mx35.h   Uwe Kleine-König
• [PATCH 11/25] imx: reformat mx25.h to match the other platform includes   Uwe Kleine-König
  • [PATCH 12/25] imx: copy constants from mx2x.h to mx21.h using the appropriate namespace   Uwe Kleine-König
• [PATCH 13/25] imx: copy constants from mx2x.h to mx27.h using the appropriate namespace   Uwe Kleine-König
• [PATCH 14/25] imx: copy constants from mx3x.h to mx31.h using the appropriate namespace   Uwe Kleine-König
  • [PATCH 15/25] imx: copy constants from mx3x.h to mx35.h using the appropriate namespace   Uwe Kleine-König
    • [PATCH 16/25] imx: generalize nand device registration   Uwe Kleine-König
      • [PATCH 17/25] imx/eukrea_cpuimx27: use new nand device registration   Uwe Kleine-König
      • [PATCH 17/25] imx/eukrea_cpuimx27: use new nand device registration   Russell King - ARM Linux
      • [PATCH 17/25] imx/eukrea_cpuimx27: use new nand device registration   Uwe Kleine-König
      • [PATCH] imx/eukrea_cpuimx27: use new nand device registration   Uwe Kleine-König
      • [PATCH 16/25] imx: generalize nand device registration   Uwe Kleine-König
      • [PATCH 16/25] imx: generalize nand device registration   Uwe Kleine-König
• [PATCH 18/25] imx/mx21ads: use new nand device registration   Uwe Kleine-König
  • [PATCH 19/25] imx/mx27ads: use new nand device registration   Uwe Kleine-König
• [PATCH 20/25] imx/pca100: use new nand device registration   Uwe Kleine-König
• [PATCH 21/25] imx/pcm038: use new nand device registration   Uwe Kleine-König
  • [PATCH 22/25] imx/armadillo5x0: use new nand device registration   Uwe Kleine-König
• [PATCH 23/25] imx/mx31lite: use new nand device registration   Uwe Kleine-König
  • [PATCH 24/25] imx/pcm037: use new nand device registration   Uwe Kleine-König
    • [PATCH 25/25] imx/mx25pdk: remove unused include   Uwe Kleine-König
• [PATCH 00/12] Mostly board updates for 2.6.33 merge window   Tony Lindgren
  • [PATCH 13/12] omap: zoom3: defconfig creation   Tony Lindgren
  • [PATCH 14/12] omap: zoom2: update defconfig for LL_DEBUG_NONE   Tony Lindgren
• [PATCH 01/12] omap: Cleanup the coding style in id.c   Tony Lindgren
• [PATCH 02/12] omap: GPIO module enable/disable   Tony Lindgren
• [PATCH 03/12] omap3: defconfigs: remove SYSFS_DEPRECATED flag   Tony Lindgren
• [PATCH 04/12] omap3: Update 3430SDP defconfig   Tony Lindgren
• [PATCH 05/12] omap3evm: Add board revision function   Tony Lindgren
  • [PATCH 05/12] omap3evm: Add board revision function   Hiremath, Vaibhav
    • [PATCH 05/12] omap3evm: Add board revision function, v2   Tony Lindgren
• [PATCH 06/12] omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E)   Tony Lindgren
• [PATCH 07/12] omap3evm: Initialize vmmc and vmmc_aux regulators   Tony Lindgren
• [PATCH 08/12] omap3evm: MIgrate to smsc911x ethernet driver   Tony Lindgren
• [PATCH 09/12] omap3: zoom: split board file for software reuse   Tony Lindgren
  • [PATCH] omap: Fix keymap for zoom2 according to matrix keypad framwork   Tony Lindgren
• [PATCH 10/12] omap3: zoom: rename zoom2 name to generic zoom   Tony Lindgren
• [PATCH 11/12] omap3: zoom: Drop i2c-1 speed to 2400   Tony Lindgren
• [PATCH 12/12] omap3: zoom: Introduce zoom3 board support   Tony Lindgren
• [PATCH 1/3] NUC900: Adding nuc950 defconfig   Wan ZongShun
• [PATCH 2/3] NUC900: Adding nuc960 defconfig   Wan ZongShun
• [PATCH 3/3] NUC900: Adding nuc932 defconfig   Wan ZongShun
• [PATCH] NUC900: Add support for nuc932 SoC   Wan ZongShun
• [PATCH] NUC900: rename w90p910 defconfig   Wan ZongShun
  • [PATCH] NUC900: rename w90p910 defconfig   Russell King - ARM Linux
    • [PATCH] NUC900: rename w90p910 defconfig   Russell King - ARM Linux
• [PATCH] ARM: Add spi controller driver support for NUC900   Wan ZongShun
  • [PATCH] ARM: Add spi controller driver support for NUC900   Andrew Morton
    • [PATCH] ARM: Add spi controller driver support for NUC900   Wan ZongShun
      • [PATCH] ARM: Add spi controller driver support for NUC900   Andrew Morton
      • [PATCH] ARM: Add spi controller driver support for NUC900   Wan ZongShun
      • [PATCH] ARM: Add spi controller driver support for NUC900   Russell King - ARM Linux
      • [PATCH] ARM: Add spi controller driver support for NUC900   Wan ZongShun
      • [PATCH] ARM: Add spi controller driver support for NUC900   Russell King - ARM Linux
• imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Daniel Mack
  • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Vadivelan M
    • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Daniel Mack
      • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Vadivelan M
• [PATCH v3] Update Samsung S5PC100 SoC support   Marek Szyprowski
  • [PATCH 01/14] ARM: S5PC1XX: registers rename   Marek Szyprowski
  • [PATCH v3] Update Samsung S5PC100 SoC support   Ben Dooks
  • [PATCH v3] Update Samsung S5PC100 SoC support   Ben Dooks
    • [PATCH v3] Update Samsung S5PC100 SoC support   Marek Szyprowski
• [PATCH 02/14] ARM: S5PC1XX: clock registers rename   Marek Szyprowski
  • [PATCH 03/14] ARM: S5PC1XX: clocks reimplementation   Marek Szyprowski
• [PATCH 04/14] ARM: S5PC1XX: add GPIO L banks to register definition   Marek Szyprowski
• [PATCH 05/14] ARM: S5PC1XX: GPIO registers rename   Marek Szyprowski
  • [PATCH 06/14] ARM: S5PC1xx: add gpiolib and external/gpio interrupt support   Marek Szyprowski
• [PATCH 07/14] ARM: S5PC1XX: add cpu idle and system reset support   Marek Szyprowski
  • [PATCH 08/14] ARM: S3C: Prepare s3c64xx-specific s3c-fb register definition for reuse   Marek Szyprowski
• [PATCH 09/14] ARM: S5PC1xx: add platform helpers for s3c-fb device   Marek Szyprowski
• [PATCH 10/14] SMDKC100: enable S3C FrameBuffer   Marek Szyprowski
  • [PATCH 11/14] ARM: S5PC1xx: add platform helpers for i2c adapter devices   Marek Szyprowski
• [PATCH 12/14] SMDKC100: add I2C0 and I2C1 buses support   Marek Szyprowski
  • [PATCH 13/14] ARM: S5PC1xx: add platform helpers for SDHCI host controllers   Marek Szyprowski
    • [PATCH 14/14] SMDKC100: add SDHCI controllers 0, 1 and 2 support   Marek Szyprowski
• [PATCH] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Marek Szyprowski
  • [PATCH] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Marc Zyngier
    • [PATCH] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Marek Szyprowski
      • [PATCH] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Marc Zyngier
      • [PATCH] ARM: MM: use 64bytes of L1 cache on plat S5PC1xx   Russell King - ARM Linux
• [PATCH] drivers: MMC: enable SDHCI-S3C on S5PC1XX platform   Marek Szyprowski
  • [PATCH] drivers: MMC: enable SDHCI-S3C on S5PC1XX platform   Marc Zyngier
    • [PATCH] drivers: MMC: enable SDHCI-S3C on S5PC1XX platform   Ben Dooks
• [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
  • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Daniel Mack
    • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Eric Miao
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Daniel Mack
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Daniel Mack
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Daniel Mack
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Daniel Mack
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Rodolfo Giometti
      • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   Russell King - ARM Linux
    • [PATCH] arm pxa: remove "direction input" forcing for IRQ GPIOs   H Hartley Sweeten
• [PATCH] ep93xx: add missing file headers   Hubert Feurstein
  • [PATCH] ep93xx: add missing file headers   H Hartley Sweeten
• [PATCH] ep93xx: add missing newline between file header and code   Hubert Feurstein
  • [PATCH] ep93xx: add missing newline between file header and code   H Hartley Sweeten
• [PATCH] ep93xx: add missing parentheses in IOMEM macro   Hubert Feurstein
  • [PATCH] ep93xx: add missing parentheses in IOMEM macro   H Hartley Sweeten
    • [PATCH] ep93xx: add missing parentheses in IOMEM macro   Russell King - ARM Linux
• [PATCH] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
• imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Daniel Mack
  • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Martin Fuzzey
    • imx27 - hanging at freeing init memory -- getting some junk characters here after on console ..   Eric Bénard
• Win FREE OMAP L 138 based HawkBoard !!!   Syed Mohammed, Khasim
• my IXP4xx patch queue   Krzysztof Halasa
  • my IXP4xx patch queue   Uwe Kleine-König
    • my IXP4xx patch queue   Krzysztof Halasa
• [PATCH 01/10] IXP4xx: move IXDP425 platform macros to the platform code.   Krzysztof Halasa
• [PATCH 02/10] IXP4xx: move AVILA platform macros to the platform code.   Krzysztof Halasa
• [PATCH 03/10] IXP4xx: move Coyote platform macros to the platform code.   Krzysztof Halasa
• [PATCH 04/10] IXP4xx: move NSLU2 platform macros to the platform code.   Krzysztof Halasa
• [PATCH 05/10] IXP4xx: move NAS100D platform macros to the platform code.   Krzysztof Halasa
• [PATCH 06/10] IXP4xx: move DSM G600 platform macros to the platform code.   Krzysztof Halasa
• [PATCH 07/10] IXP4xx: move FSG platform macros to the platform code.   Krzysztof Halasa
• [PATCH 08/10] IXP4xx: Remove unused Motorola PrPMC1100 platform macros.   Krzysztof Halasa
• [PATCH 09/10] IXP4xx: move Gemtek GTWX5715 platform macros to the platform code.   Krzysztof Halasa
• [PATCH 10/10] IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files.   Krzysztof Halasa
• [PATCH 0/3] pxa_camera: remove init() callback   Antonio Ospite
  • [PATCH 1/3] em-x270: don't use pxa_camera init() callback   Antonio Ospite
    • [PATCH 1/3] em-x270: don't use pxa_camera init() callback   Mike Rapoport
    • [PATCH 1/3] em-x270: don't use pxa_camera init() callback   Guennadi Liakhovetski
      • [PATCH 1/3] em-x270: don't use pxa_camera init() callback   Antonio Ospite
      • [PATCH 1/3 v2] em-x270: don't use pxa_camera init() callback   Antonio Ospite
  • [PATCH 2/3] pcm990-baseboard: don't use pxa_camera init() callback   Antonio Ospite
    • [PATCH 2/3] pcm990-baseboard: don't use pxa_camera init() callback   Guennadi Liakhovetski
      • [PATCH 2/3] pcm990-baseboard: don't use pxa_camera init() callback   Juergen Beisert
      • [PATCH 2/3 v2] pcm990-baseboard: don't use pxa_camera init() callback   Antonio Ospite
      • [PATCH 2/3 v2] pcm990-baseboard: don't use pxa_camera init() callback   Eric Miao
  • [PATCH 3/3] pxa_camera: remove init() callback   Antonio Ospite
    • [PATCH 3/3] pxa_camera: remove init() callback   Guennadi Liakhovetski
      • [PATCH 3/3] pxa_camera: remove init() callback   Antonio Ospite
      • [PATCH 3/3] pxa_camera: remove init() callback   Guennadi Liakhovetski
      • [PATCH 3/3] pxa_camera: remove init() callback   Antonio Ospite
  • [PATCH 0/3] pxa_camera: remove init() callback   Antonio Ospite
    • [PATCH 0/3] pxa_camera: remove init() callback   Eric Miao
• [patch 11/13] arm: Fixup last users of irq_chip->typename   Thomas Gleixner
• [PATCH 00/12] New omap boards and rx51/n900 updates for 2.6.33   Tony Lindgren
  • [PATCH 01/12] omap1: Add board support and LCD for HTC Herald   Tony Lindgren
  • [PATCH 02/12] omap1: Add default kernel configuration for Herald   Tony Lindgren
  • [PATCH 03/12] omap3: rx51: Add SDRAM init   Tony Lindgren
  • [PATCH 04/12] omap3: rx51: Add wl1251 wlan driver support   Tony Lindgren
  • [PATCH 05/12] omap3: Add CompuLab CM-T35 board support   Tony Lindgren
  • [PATCH 06/12] omap3: Add CompuLab CM-T35 defconfig   Tony Lindgren
  • [PATCH 07/12] omap3: Add minimal IGEP v2 support   Tony Lindgren
  • [PATCH 08/12] omap: 3630sdp: introduce 3630 sdp board support   Tony Lindgren
  • [PATCH 09/12] omap: 3630sdp: defconfig creation   Tony Lindgren
  • [PATCH 10/12] omap3: Add defconfig for IGEP v2 board   Tony Lindgren
  • [PATCH 11/12] AM35xx: Add support for AM3517 EVM board   Tony Lindgren
  • [PATCH 12/12] AM35xx: Defconfig for AM3517 EVM board   Tony Lindgren
• [PATCH] IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four.   Krzysztof Halasa
• [PATCH] hx4700: fix hx4700 touchscreen pressure values   Paul Parsons
• [PATCH] hx4700: fix hx4700 touchscreen pressure values   Eric Miao
• 2.6.32-rc7: compile regression on spitz   Pavel Machek
  • 2.6.32-rc7: compile regression on spitz   Stanislav Brabec
    • 2.6.32-rc7: compile regression on spitz   Eric Miao
  • 2.6.32-rc7: compile regression on spitz   Pavel Machek
• [PATCH 0/4] OMAP hwmod improvements for 2.6.33   Paul Walmsley
  • [PATCH 1/4] OMAP3 hwmod: reprogram OCP_SYSCONFIG register after setting SOFTRESET   Paul Walmsley
  • [PATCH 4/4] OMAP3 hwmod: drop most of the OCP_SYSCONFIG.CLOCKACTIVITY code   Paul Walmsley
• [PATCH 2/4] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling   Paul Walmsley
• [PATCH 3/4] OMAP hwmod: add names to module MPU IRQ lines   Paul Walmsley
• [PATCH] Add Samsung S5PC110 SoC support   Marek Szyprowski
  • [PATCH 01/19] ARM: S5PC100: use 0x30008000 as memory base   Marek Szyprowski
  • [PATCH 02/19] ARM: S5PC1XX: create sub-platform for S5PC100 SoCs   Marek Szyprowski
  • [PATCH 03/19] ARM: S5PC1XX: prepare common cpu&clocks code for S5PC110 sub-platform   Marek Szyprowski
  • [PATCH 04/19] ARM: S5PC1XX: prepare common gpiolib code for S5PC110 sub-platform   Marek Szyprowski
  • [PATCH 05/19] ARM: S5PC1XX: move common s5pc1xx mach/* includes to plat-s5pc1xx/include/mach   Marek Szyprowski
  • [PATCH 06/19] ARM: S5PC1XX: cleanup of s5pc1xx common code   Marek Szyprowski
  • [PATCH 07/19] ARM: S5PC1XX: move s5pc100 specific device helpers to mach-s5pc100 dir   Marek Szyprowski
  • [PATCH 08/19] ARM: S5PC1XX: move common s5pc1xx s3c-fb regs to platform directory   Marek Szyprowski
    • [PATCH 08/19] ARM: S5PC1XX: move common s5pc1xx s3c-fb regs to platform directory   Ben Dooks
  • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Marek Szyprowski
    • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   jassi brar
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Ben Dooks
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   jassi brar
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Mark Brown
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   jassi brar
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Mark Brown
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   jassi brar
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Mark Brown
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Russell King - ARM Linux
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Mark Brown
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Russell King - ARM Linux
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   jassi brar
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Marek Szyprowski
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Mark Brown
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   jassi brar
      • [PATCH 09/19] drivers: serial: add support for Samsung S5PC110 SoC uart   Russell King - ARM Linux
  • [PATCH 10/19] ARM: S5PC1XX: add S5PC110 memory map   Marek Szyprowski
    • [PATCH 10/19] ARM: S5PC1XX: add S5PC110 memory map   Ben Dooks
      • [PATCH 10/19] ARM: S5PC1XX: add S5PC110 memory map   Kyungmin Park
  • [PATCH 11/19] ARM: S5PC1XX: add S5PC110 cpu initialization code   Marek Szyprowski
  • [PATCH 12/19] ARM: S5PC1XX: add support for s5pc110 plls and clocks   Marek Szyprowski
    • [PATCH 12/19] ARM: S5PC1XX: add support for s5pc110 plls and clocks   Ben Dooks
  • [PATCH 13/19] ARM: S5PC1XX: add support for s5pc110 irqs   Marek Szyprowski
  • [PATCH 14/19] ARM: S5PC1XX: add support for s5pc110 gpio   Marek Szyprowski
    • [PATCH 14/19] ARM: S5PC1XX: add support for s5pc110 gpio   Ben Dooks
      • [PATCH 14/19] ARM: S5PC1XX: add support for s5pc110 gpio   Marek Szyprowski
  • [PATCH 15/19] ARM: S5PC1XX: add i2c platform helpers on s5pc110 sub-platform   Marek Szyprowski
  • [PATCH 16/19] ARM: S5PC1XX: enable S5PC110 sub-platform   Marek Szyprowski
  • [PATCH 17/19] ARM: S5PC1XX: add sdhci platform helpers for s5pc110 sub-platform   Marek Szyprowski
  • [PATCH 18/19] ARM: S5PC1XX: add framebuffer platform helpers for s5pc110 sub-platform   Marek Szyprowski
  • [PATCH 19/19] ARM: S5PC1XX: add support for SMDKC110 board   Marek Szyprowski
  • [PATCH] Add Samsung S5PC110 SoC support   Ben Dooks
  • [PATCH v2] Add Samsung S5PC110 SoC support   Marek Szyprowski
  • [PATCH 01/20] ARM: S5PC100: use 0x30008000 as memory base   Marek Szyprowski
    • [PATCH 01/20] ARM: S5PC100: use 0x30008000 as memory base   jassi brar
  • [PATCH 02/20] ARM: S5PC1XX: create sub-platform for S5PC100 SoCs   Marek Szyprowski
  • [PATCH 03/20] ARM: S5PC1XX: prepare common cpu&clocks code for S5PC110 sub-platform   Marek Szyprowski
  • [PATCH 04/20] ARM: S5PC1XX: prepare common gpiolib code for S5PC110 sub-platform   Marek Szyprowski
  • [PATCH 05/20] ARM: S5PC1XX: move common s5pc1xx mach/* includes to plat-s5pc1xx/include/mach   Marek Szyprowski
  • [PATCH 06/20] ARM: S5PC1XX: cleanup of s5pc1xx common code   Marek Szyprowski
  • [PATCH 07/20] ARM: S5PC1XX: move s5pc100 specific device helpers to mach-s5pc100 dir   Marek Szyprowski
  • [PATCH 08/20] ARM: S5PC1XX: move common s5pc1xx s3c-fb regs to platform directory   Marek Szyprowski
  • [PATCH 09/20] drivers: serial: add support for Samsung S5PC110 SoC uart   Marek Szyprowski
  • [PATCH 10/20] ARM: S5PC1XX: add S5PC110 memory map   Marek Szyprowski
  • [PATCH 11/20] ARM: S5PC1XX: add S5PC110 cpu initialization code   Marek Szyprowski
  • [PATCH 12/20] ARM: S5PC1XX: add support for s5pc110 plls and clocks   Marek Szyprowski
  • [PATCH 13/20] ARM: S5PC1XX: add support for s5pc110 irqs   Marek Szyprowski
  • [PATCH 14/20] ARM: S5PC1XX: add support for s5pc110 gpio   Marek Szyprowski
  • [PATCH 15/20] ARM: S5PC1XX: add i2c platform helpers on s5pc110 sub-platform   Marek Szyprowski
  • [PATCH 16/20] ARM: S5PC1XX: enable S5PC110 sub-platform   Marek Szyprowski
  • [PATCH 17/20] ARM: S5PC1XX: add sdhci platform helpers for s5pc110 sub-platform   Marek Szyprowski
  • [PATCH 18/20] ARM: S5PC1XX: add framebuffer platform helpers for s5pc110 sub-platform   Marek Szyprowski
  • [PATCH 19/20] ARM: S5PC1XX: add support for SMDKC110 board   Marek Szyprowski
  • [PATCH 20/20] MAINTAINERS: add ARM/S5PC100 and ARM/S5PC110 architectures   Marek Szyprowski
• [PATCH 1/5] ARN: MX3: modularize 'mx31lite' code   Daniel Mack
• [PATCH 2/5] ARM: MX3: add MMC/SDHC support to mx31lite-db.c   Daniel Mack
  • [PATCH 3/5] ARM: MX3: add SPI devices for mx31lite   Daniel Mack
    • [PATCH 3/5] ARM: MX3: add SPI devices for mx31lite   Sascha Hauer
      • [PATCH 3/5] ARM: MX3: add SPI devices for mx31lite   Daniel Mack
      • [PATCH 3/5] ARM: MX3: add SPI devices for mx31lite   Sascha Hauer
      • [PATCH 3/5] ARM: MX3: add SPI devices for mx31lite   Daniel Mack
• [PATCH 4/5] ARM: MX3: add USB functions for mx31litekit   Daniel Mack
  • [PATCH 5/5] ARM: MX3: add support for GPIO LEDs on litekit db   Daniel Mack
• [PATCH 1/4] input: atmel_tsadcc: touchscreen rework setting capabilities   Nicolas Ferre
  • [PATCH 3/4] at91/input: platform parameters for atmel_tsadcc in at91sam9rlek   Nicolas Ferre
  • [PATCH 4/4] at91/input: touchscreen support for at91sam9g45ekes   Nicolas Ferre
  • [PATCH 1/4] input: atmel_tsadcc: touchscreen rework setting capabilities   Dmitry Torokhov
    • [PATCH 1/4] input: atmel_tsadcc: touchscreen rework setting capabilities   Nicolas Ferre
      • [PATCH 1/4] input: atmel_tsadcc: touchscreen rework setting capabilities   Dmitry Torokhov
• [PATCH 2/4] input: atmel_tsadcc touchscreen use platform parameters   Nicolas Ferre
• [PATCH] hx4700: fix hx4700 touchscreen pressure values   Pavel Machek
  • [PATCH] hx4700: fix hx4700 touchscreen pressure values   Dmitry Torokhov
    • [PATCH] hx4700: fix hx4700 touchscreen pressure values   Dmitry Torokhov
      • [PATCH] hx4700: fix hx4700 touchscreen pressure values   Pavel Machek
• [PATCH 00/10] Omap mailbox updates for omap4 for 2.6.33   Tony Lindgren
  • [PATCH 01/10] omap: mailbox: Add build specific changes to support omap mailbox   Tony Lindgren
  • [PATCH 02/10] omap: mailbox: Add resources and mailbox register base address for OMAP4 mailbox   Tony Lindgren
  • [PATCH 03/10] omap: mailbox: remove sequence bit checking   Tony Lindgren
  • [PATCH 04/10] omap: mailbox: remove class interface   Tony Lindgren
  • [PATCH 05/10] omap: mailbox: remove disable_/enable_mbox_irq in isr   Tony Lindgren
  • [PATCH 06/10] omap: mailbox: remove unnecessary arg for omap_mbox_msg_send   Tony Lindgren
  • [PATCH 07/10] omap: mailbox: Expose omap_mbox_enable()/disable_irq()   Tony Lindgren
  • [PATCH 08/10] omap: mailbox: Adds code changes to support OMAP4 mailbox   Tony Lindgren
  • [PATCH 09/10] omap: mailbox: OMAP4 Mailbox Patch to change the IRQ flag from IRQF_DISABLED to IRQF_SHARED   Tony Lindgren
  • [PATCH 10/10] omap: mailbox: OMAP4 Mailbox-driver Patch to support tasklet implementation   Tony Lindgren
• [GIT PULL] omap fixes for v2.6.32-rc7   Tony Lindgren
• [PATCH] BCMRING: use generic io access macros   Leo (Hao) Chen
• [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Ben Dooks
  • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Ramax Lo
  • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Dmitry Torokhov
    • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Harald Welte
    • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Ben Dooks
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Daniel Silverstone
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Dmitry Torokhov
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Russell King - ARM Linux
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Ben Dooks
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Dmitry Torokhov
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Pavel Machek
  • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Shine Liu
    • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Mark Brown
      • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Ben Dooks
  • [patch 1/1] TOUCHSCREEN: S3C24XX touchscreen driver from Arnaud Patard.   Vasily Khoruzhick
• Fwd: [BUG]2.6.27.y some contents lost after writing to mmaped file   JiSheng Zhang
• [PATCH v2] ARM:S3C2440: MINI2440 Remove some improper __initdata qualifiers   Shine Liu
• Can anyone help test Cortex A9 patches?   Russell King - ARM Linux
  • Can anyone help test Cortex A9 patches?   Shilimkar, Santosh
  • Can anyone help test Cortex A9 patches?   Srinidhi KASAGAR
  • Can anyone help test Cortex A9 patches?   Catalin Marinas
    • Can anyone help test Cortex A9 patches?   Russell King - ARM Linux
      • Can anyone help test Cortex A9 patches?   Catalin Marinas
      • Can anyone help test Cortex A9 patches?   Rajanikanth H.V
• [PATCH] SPI: drain MXC SPI transfer buffer when probing device   Daniel Mack
• [PATCH] SPI: drain MXC SPI transfer buffer when probing device   Daniel Mack
  • [PATCH] SPI: drain MXC SPI transfer buffer when probing device   Uwe Kleine-König
    • [PATCH] SPI: drain MXC SPI transfer buffer when probing device   Daniel Mack
      • [PATCH] SPI: drain MXC SPI transfer buffer when probing device   Uwe Kleine-König
• [PATCH 1/6] ARM: MX3: modularize 'mx31lite' code   Daniel Mack
• [PATCH 2/6] ARM: MX3: add MMC/SDHC support to mx31lite-db.c   Daniel Mack
  • [PATCH 3/6] ARM: MX3: add SPI devices for mx31lite   Daniel Mack
    • [PATCH 4/6] ARM: MX3: add USB functions for mx31litekit   Daniel Mack
      • [PATCH 5/6] ARM: MX3: add support for GPIO LEDs on litekit db   Daniel Mack
      • [PATCH 6/6] ARM: MX3: add NOR flash support via physmap mtd driver   Daniel Mack
• [PATCH 1/1] mx31moboard: change initial reset status for robot microcontolers   Valentin Longchamp
  • [PATCH 1/1] mx31moboard: change initial reset status for robot microcontollers   Valentin Longchamp
  • [PATCH 1/1] mx31moboard: change initial reset status for robot microcontollers   Valentin Longchamp
• [PATCH 0/6] mx31moboard: patches for next merge window (V3)   Valentin Longchamp
  • [PATCH 2/7] mx31moboard: serial port fix   Valentin Longchamp
  • [PATCH 4/7] mx31moboard: SPI and MC13783 voltage regulator support   Valentin Longchamp
  • [PATCH 5/7] mx31moboard: initialize ipu device for all the boards   Valentin Longchamp
  • [PATCH 6/7] mx31moboard: camera support   Valentin Longchamp
  • [PATCH 7/7] mx31moboard: support for usbh1 and usbh2   Valentin Longchamp
  • [PATCH 0/6] mx31moboard: patches for next merge window (V3)   Valentin Longchamp
  • [PATCH 0/6] mx31moboard: patches for next merge window (V3)   Sascha Hauer
• [PATCH 1/7] mx31: various pins used for mx31moboard   Valentin Longchamp
• [PATCH 3/7] mx31moboard: support for pin linked for battery presence check   Valentin Longchamp
• i.MX audio support   Sascha Hauer
  • [PATCH 01/12] mx3: Add SSI pins to iomux table   Sascha Hauer
  • i.MX audio support   Mark Brown
    • i.MX audio support   Sascha Hauer
      • [alsa-devel] i.MX audio support   Mark Brown
      • [alsa-devel] i.MX audio support   javier Martin
      • [alsa-devel] i.MX audio support   Sascha Hauer
      • [alsa-devel] i.MX audio support   javier Martin
      • [alsa-devel] i.MX audio support   Sascha Hauer
  • i.MX audio support   Mark Brown
    • [alsa-devel] i.MX audio support   Sascha Hauer
      • [alsa-devel] i.MX audio support   Mark Brown
  • i.MX audio support   Mark Brown
    • i.MX audio support   Sascha Hauer
• [PATCH 02/12] mxc: iomux v3: remove resource handling   Sascha Hauer
  • [PATCH 03/12] add a mc13783 codec driver   Sascha Hauer
    • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Mark Brown
      • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Sascha Hauer
      • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Mark Brown
      • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Sascha Hauer
      • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Mark Brown
      • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Sascha Hauer
      • [alsa-devel] [PATCH 03/12] add a mc13783 codec driver   Mark Brown
• [PATCH 04/12] i.MX31 clock: rename SSI clocks to driver name   Sascha Hauer
  • [PATCH 05/12] mxc: mx1/mx2 DMA: add a possibility to create an endless DMA transfer   Sascha Hauer
    • [PATCH 06/12] imx-ssi sound driver   Sascha Hauer
      • [alsa-devel] [PATCH 06/12] imx-ssi sound driver   Mark Brown
      • [PATCH 06/12] imx-ssi sound driver   Timur Tabi
      • [PATCH 06/12] imx-ssi sound driver   Mark Brown
      • [PATCH 06/12] imx-ssi sound driver   Sascha Hauer
      • [PATCH 06/12] imx-ssi sound driver   Timur Tabi
      • [PATCH 06/12] imx-ssi sound driver   Sascha Hauer
      • [PATCH 06/12] imx-ssi sound driver   Timur Tabi
• [PATCH 07/12] add phycore sound support   Sascha Hauer
  • [PATCH 08/12] sound/soc/imx: Makefile/Kconfig changes for new driver   Sascha Hauer
  • [alsa-devel] [PATCH 07/12] add phycore sound support   Mark Brown
• [PATCH 09/12] pcm038: add sound support   Sascha Hauer
  • [PATCH 10/12] pcm043: add sound support   Sascha Hauer
• [PATCH 11/12] pca100: add sound support   Sascha Hauer
  • [PATCH 12/12] pcm037: Add sound support   Sascha Hauer
• MX3 SDMA?   Daniel Mack
  • MX3 SDMA?   Magnus Lilja
    • AW: MX3 SDMA?   Wolf, Rene, HRO-GP
• [PATCH] Add COH 901 318 DMA block driver v5   Linus Walleij
  • [PATCH] Add COH 901 318 DMA block driver v5   Dan Williams
• [PATCH 2/3] staging/dream: add missing include files   Greg KH
  • [PATCH 2/3] staging/dream: add missing include files   Pavel Machek
    • [PATCH 2/3] staging/dream: add missing include files   Russell King - ARM Linux
    • [PATCH 2/3] staging/dream: add missing include files   Greg KH
• RFC [PATCH 1/9] Added support for lpc32xx based platforms   Kevin Wells
• RFC [PATCH 2/9] Initial makefiles and Kconfigs for the lcp32xx mach   Kevin Wells
  • RFC [PATCH 2/9] Initial makefiles and Kconfigs for the lcp32xx mach   Russell King - ARM Linux
    • RFC [PATCH 2/9] Initial makefiles and Kconfigs for the lcp32xx mach   Shilimkar, Santosh
      • RFC [PATCH 2/9] Initial makefiles and Kconfigs for the lcp32xx mach   Russell King - ARM Linux
• RFC [PATCH 3/9] Added core lpc32xx architecture files   Kevin Wells
  • RFC [PATCH 3/9] Added core lpc32xx architecture files   Wan ZongShun
  • RFC [PATCH 3/9] Added core lpc32xx architecture files   Russell King - ARM Linux
    • RFC [PATCH 3/9] Added core lpc32xx architecture files   Kevin Wells
• RFC [PATCH 4/9] Added lpc32xx clock handler   Kevin Wells
  • RFC [PATCH 4/9] Added lpc32xx clock handler   Russell King - ARM Linux
• RFC [PATCH 5/9] Added phy3250 platform for the lcp3250   Kevin Wells
  • RFC [PATCH 5/9] Added phy3250 platform for the lcp3250   Wan ZongShun
    • RFC [PATCH 5/9] Added phy3250 platform for the lcp3250   Kevin Wells
• RFC [PATCH 6/9] Added lpc32xx platform.h file   Kevin Wells
  • RFC [PATCH 6/9] Added lpc32xx platform.h file   Wan ZongShun
    • RFC [PATCH 6/9] Added lpc32xx platform.h file   Kevin Wells
  • RFC [PATCH 6/9] Added lpc32xx platform.h file   Wan ZongShun
    • RFC [PATCH 6/9] Added lpc32xx platform.h file   Paulius Zaleckas
      • RFC [PATCH 6/9] Added lpc32xx platform.h file   Wan ZongShun
• RFC [PATCH 7/9] Added lpc32xx interrupt macros and debug message macros   Kevin Wells
• RFC [PATCH 8/9] Added plc32xx platform include files   Kevin Wells
  • RFC [PATCH 8/9] Added plc32xx platform include files   Russell King - ARM Linux
• RFC [PATCH 9/9] Initial phy3250 platform default configuration   Kevin Wells
• Fwd: [BUG]2.6.27.y some contents lost after writing to mmaped file   JiSheng Zhang
• [BUG]2.6.27.y some contents lost after writing to mmaped file   JiSheng Zhang
• [PATCH v2]: NUC900: Add spi driver support for nuc900   Wan ZongShun
  • [PATCH v2]: NUC900: Add spi driver support for nuc900   Li Jie
    • [PATCH v2]: NUC900: Add spi driver support for nuc900   Wan ZongShun
  • [PATCH v2]: NUC900: Add spi driver support for nuc900   Li Jie
    • [PATCH v2]: NUC900: Add spi driver support for nuc900   Wan ZongShun
  • [PATCH v2]: NUC900: Add spi driver support for nuc900   Wan ZongShun
    • [PATCH v2]: NUC900: Add spi driver support for nuc900   Andrew Morton
• [PATCH 01/01] pxa: update flash structure in onenand info   Haojian Zhuang
  • [PATCH 01/01] pxa: update flash structure in onenand info   Eric Miao
• [PATCH 1/1] mx31moboard: change initial reset status for robot microcontollers   Valentin Longchamp
• Allow selecting MSM framebuffer in Kconfig   Pavel Machek
  • Allow selecting MSM framebuffer in Kconfig   Daniel Walker
• [PATCH 0/8] S3C64xx fixes   Maurus Cuelenaere
• [PATCH 1/8] s3c6410: Add new quirk in sdhci driver and update ADMA descriptor build.   Maurus Cuelenaere
• [PATCH 2/8] s3c6410: Enable ADMA feature in 6410 sdhci controller.   Maurus Cuelenaere
• [PATCH 3/8] S3C64xx: remove SDHCI_QUIRK_NO_MULTIBLOCK   Maurus Cuelenaere
• [PATCH 4/8] S3C64xx: add HSMMC2 support   Maurus Cuelenaere
  • [PATCH 4/8] S3C64xx: add HSMMC2 support   Ben Dooks
    • [PATCH 4/8 v2] S3C64xx: add HSMMC2 support   Maurus Cuelenaere
• [PATCH 5/8] S3C64xx: fix USB OTG compilation   Maurus Cuelenaere
  • [PATCH 5/8] S3C64xx: fix USB OTG compilation   Ben Dooks
• [PATCH 6/8] S3C: merge ADC drivers and add support for the S3C64xx   Maurus Cuelenaere
  • [PATCH 6/8] S3C: merge ADC drivers and add support for the S3C64xx   Vasily Khoruzhick
    • [PATCH 6/8] S3C: merge ADC drivers and add support for the S3C64xx   Maurus Cuelenaere
      • [PATCH 6/8 v2] S3C: merge ADC drivers and add support for the S3C64xx   Maurus Cuelenaere
      • [PATCH 6/8 v2] S3C: merge ADC drivers and add support for the S3C64xx   Ben Dooks
      • [PATCH 6/8 v2] S3C: merge ADC drivers and add support for the S3C64xx   Maurus Cuelenaere
• [PATCH 7/8] S3C64xx: add support for all group 0 external interrupts   Maurus Cuelenaere
• [PATCH 8/8] S3C64xx: add support to the RTC driver   Maurus Cuelenaere
• [PATCH 0/2] PNX fixes   Russell King - ARM Linux
  • [PATCH 1/2] ARM: PNX4008: fix i2c-pnx.c build errors   Russell King - ARM Linux
    • [PATCH 1/2] ARM: PNX4008: fix i2c-pnx.c build errors   Ben Dooks
      • [PATCH 1/2] ARM: PNX4008: fix i2c-pnx.c build errors   Russell King - ARM Linux
  • [PATCH 2/2] ARM: PNX4008: fix watchdog device driver name   Russell King - ARM Linux
    • [PATCH 2/2] ARM: PNX4008: fix watchdog device driver name   Wim Van Sebroeck
      • [PATCH 2/2] ARM: PNX4008: fix watchdog device driver name   Russell King - ARM Linux
• [PATCH 0/10] PNX clock API fixes   Russell King - ARM Linux
  • [PATCH 01/10] ARM: PNX4008: convert to clkdev   Russell King - ARM Linux
  • [PATCH 06/10] ARM: PNX4008: convert i2c clocks to match by device only   Russell King - ARM Linux
  • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Russell King - ARM Linux
    • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Russell King - ARM Linux
      • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Vitaly Wool
    • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Linus Walleij
      • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Russell King - ARM Linux
      • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Kevin Wells
      • [PATCH 07/10] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Kevin Wells
  • [PATCH 08/10] ARM: PNX4008: move i2c clock start/stop into driver   Russell King - ARM Linux
  • [PATCH 02/10] ARM: PNX4008: simplify clk enable/disable paths   Russell King - ARM Linux
  • [PATCH 03/10] ARM: PNX4008: provide clock enable/disable methods and initialization   Russell King - ARM Linux
  • [PATCH 09/10] ARM: PNX4008: convert i2c-pnx to use clk API enable/disable calls   Russell King - ARM Linux
  • [PATCH 10/10] ARM: PNX4008: get i2c clock rate from clk API   Russell King - ARM Linux
  • [PATCH 05/10] ARM: PNX4008: convert watchdog to use clk API enable/disable calls   Russell King - ARM Linux
    • [PATCH 05/10] ARM: PNX4008: convert watchdog to use clk API enable/disable calls   Wim Van Sebroeck
      • [PATCH 05/10] ARM: PNX4008: convert watchdog to use clk API enable/disable calls   Kevin Wells
      • [PATCH 05/10] ARM: PNX4008: convert watchdog to use clk API enable/disable calls   Russell King - ARM Linux
  • [PATCH 04/10] ARM: PNX4008: convert watchdog clocks to match by device only   Russell King - ARM Linux
    • [PATCH 04/10] ARM: PNX4008: convert watchdog clocks to match by device only   Wim Van Sebroeck
      • [PATCH 04/10] ARM: PNX4008: convert watchdog clocks to match by device only   Russell King - ARM Linux
• [PATCH] [ARM] pxa: update flash structure in onenand info   Haojian Zhuang
• [PATCH] ARM: PXA: CPUFREQ: Fix index assignments for end marker   Daniel Mack
• [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   Russell King - ARM Linux
  • [PATCH 1/7] ARM: provide phys_to_page() to complement page_to_phys()   Russell King - ARM Linux
    • [PATCH 1/7] ARM: provide phys_to_page() to complement page_to_phys()   Catalin Marinas
  • [PATCH 2/7] ARM: dma-mapping: simplify page_to_dma() and __pfn_to_bus()   Russell King - ARM Linux
    • [PATCH 2/7] ARM: dma-mapping: simplify page_to_dma() and__pfn_to_bus()   Catalin Marinas
  • [PATCH 3/7] ARM: dma-mapping: provide dma_to_page()   Russell King - ARM Linux
  • [PATCH 4/7] ARM: dma-mapping: split dma_unmap_page() from dma_unmap_single()   Russell King - ARM Linux
  • [PATCH 5/7] ARM: dma-mapping: use the idea of buffer ownership   Russell King - ARM Linux
  • [PATCH 6/7] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
    • [PATCH 6/7] ARM: dma-mapping: fix for speculative accesses   Catalin Marinas
      • [PATCH 6/7] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
    • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   saeed bishara
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   saeed bishara
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   saeed bishara
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Catalin Marinas
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Nicolas Pitre
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Mark Brown
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Catalin Marinas
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Nicolas Pitre
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   saeed bishara
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Catalin Marinas
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Russell King - ARM Linux
      • [PATCH v2 06/17] ARM: dma-mapping: fix for speculative accesses   Ronen Shitrit
  • [PATCH 7/7] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Russell King - ARM Linux
    • [PATCH 7/7] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Nicolas Pitre
      • [PATCH 7/7] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Russell King - ARM Linux
    • [PATCH 7/7] ARM: dma-mapping: no need to clean overlapping cachelines on invalidate   Catalin Marinas
      • [PATCH 7/7] ARM: dma-mapping: no need to clean overlapping cachelines on invalidate   Russell King - ARM Linux
    • [PATCH v2 07/17] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Russell King - ARM Linux
      • [PATCH v2 07/17] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Nicolas Pitre
      • [PATCH v2 07/17] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Catalin Marinas
      • [PATCH v2 07/17] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Russell King - ARM Linux
      • [PATCH v2 07/17] ARM: dma-mapping: no need to cleanoverlapping cache lines on invalidate   Catalin Marinas
      • [PATCH v2 07/17] ARM: dma-mapping: no need to clean overlapping cache lines on invalidate   Russell King - ARM Linux
  • [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   Jamie Iles
    • [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   Russell King - ARM Linux
  • [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   Rajanikanth H.V
    • [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   Russell King - ARM Linux
  • [PATCH 0/10] dma-mapping: cleanup coherent/writealloc dma allocations and ARMv7 memory support   Russell King - ARM Linux
    • [PATCH 01/10] ARM: dma-mapping: split out vmregion code from dma coherent mapping code   Russell King - ARM Linux
    • [PATCH 02/10] ARM: dma-mapping: functions to allocate/free a coherent buffer   Russell King - ARM Linux
    • [PATCH 03/10] ARM: dma-mapping: fix coherent arch dma_alloc_coherent()   Russell King - ARM Linux
    • [PATCH 04/10] ARM: dma-mapping: fix nommu dma_alloc_coherent()   Russell King - ARM Linux
    • [PATCH 05/10] ARM: dma-mapping: factor dma_free_coherent() common code   Russell King - ARM Linux
    • [PATCH 06/10] ARM: dma-mapping: move consistent_init into CONFIG_MMU section   Russell King - ARM Linux
      • [PATCH 06/10] ARM: dma-mapping: move consistent_init into CONFIG_MMU section   Greg Ungerer
      • [PATCH 06/10] ARM: dma-mapping: move consistent_init into CONFIG_MMU section   Russell King - ARM Linux
    • [PATCH 07/10] ARM: dma-mapping: clean up coherent arch dma allocation   Russell King - ARM Linux
    • [PATCH 08/10] ARM: dma-mapping: Factor out noMMU dma buffer allocation code   Russell King - ARM Linux
    • [PATCH 09/10] ARM: dma-mapping: get rid of setting/clearing the reserved page bit   Russell King - ARM Linux
    • [PATCH 10/10] ARM: dma-mapping: switch ARMv7 DMA mappings to retain 'memory' attribute   Russell King - ARM Linux
      • [PATCH 10/10] ARM: dma-mapping: switch ARMv7 DMA mappings to retain'memory' attribute   Catalin Marinas
    • [PATCH 0/10] dma-mapping: cleanup coherent/writealloc dma allocations and ARMv7 memory support   Greg Ungerer
      • [PATCH 0/10] dma-mapping: cleanup coherent/writealloc dma allocations and ARMv7 memory support   Russell King - ARM Linux
• [PATCH 1/2] system: mb, wmb and rmb should do a memory barrier even for non SMP   Abhijeet Dharmapurikar
  • [PATCH 2/2] dma: change coherent memory to normal noncached   Abhijeet Dharmapurikar
    • [PATCH 2/2] dma: change coherent memory to normal noncached   Russell King - ARM Linux
  • [PATCH 1/2] system: mb, wmb and rmb should do a memory barrier even for non SMP   Russell King - ARM Linux
• [GIT PULL] iop clocksource support for 2.6.33   Dan Williams
  • [GIT PULL] iop clocksource support for 2.6.33   Linus Walleij
    • [GIT PULL] iop clocksource support for 2.6.33   Mikael Pettersson
• [PATCH 1/3] staging/dream: add missing include files   Pavel Machek
• [PATCH 2/3] staging/dream: Add final missing bits   Pavel Machek
• [PATCH 3/3] staging/dream: fix memory leak in camera error path   Pavel Machek
• NetSilicon support   Russell King - ARM Linux
• [REPOST PATCH 0/3] MX21 USB Host Support   Martin Fuzzey
  • [REPOST PATCH 1/3] MXC: Add i.MX21 specific USB host controller driver.   Martin Fuzzey
  • [REPOST PATCH 2/3] MXC: use DMA_BIT_MASK macro rather than hardcoded constants.   Martin Fuzzey
  • [REPOST PATCH 3/3] MXC: add platform resources for i.MX21 USB host controller.   Martin Fuzzey
• [PATCH] ARM: MX3: fix CPU revision number detection   Daniel Mack
• [PATCH] imx: bit &/| confusion   Roel Kluin
• [PATCH] ARM: PNX4008: i2c-pnx: use the same dev_id for request_irq and free_irq   Russell King - ARM Linux
  • [PATCH] ARM: PNX4008: i2c-pnx: use the same dev_id for request_irq and free_irq   Ben Dooks
• [PATCH] ARM: MX3: fix CPU revision number detection   Daniel Mack
  • [PATCH] ARM: MX3: fix CPU revision number detection   Russell King - ARM Linux
    • [PATCH] ARM: MX3: fix CPU revision number detection   Daniel Mack
      • [PATCH] ARM: MX3: fix CPU revision number detection   Sascha Hauer
    • [PATCH] ARM: MX3: fix CPU revision number detection   Russell King - ARM Linux
      • [PATCH] ARM: MX3: fix CPU revision number detection   Daniel Mack
• [PATCH] ARM: MX3: lilly1131: move MC13783 device registration   Daniel Mack
  • [PATCH] ARM: MX3: lilly1131: move MC13783 device registration   Sascha Hauer
    • [PATCH] ARM: MX3: lilly1131: move MC13783 device registration   Daniel Mack
      • [PATCH] ARM: MX3: lilly1131: move MC13783 device registration   Sascha Hauer
• Fix backlight limiting   Pavel Machek
• [PATCH] OMAP: return PTR_ERR rather than IS_ERR   Roel Kluin
• [PATCH] Add GDMA API for w90p910 platform   Hu Ruihuan
  • [PATCH] Add GDMA API for w90p910 platform   Li Jie
    • [PATCH] Add GDMA API for w90p910 platform   Hu Ruihuan
  • [PATCH] Add GDMA API for w90p910 platform   Wan ZongShun
• [GIT PULL] pxa: fix for v2.6.32-rc8   Eric Miao
• [PATCH] ARM: NUC900: add rtc controller driver support for NUC900   Wan ZongShun
  • [rtc-linux] [PATCH] ARM: NUC900: add rtc controller driver support for NUC900   Alessandro Zummo
    • [rtc-linux] [PATCH] ARM: NUC900: add rtc controller driver support for NUC900   Wan ZongShun
      • [rtc-linux] [PATCH] ARM: NUC900: add rtc controller driver support for NUC900   Alessandro Zummo
• [PATCH] pxa: add frame buffer on pxa168 aspenite platform   Jun Nie
• [PATCH] pxa: add frame buffer on pxa910 ttc_dkb platform   Jun Nie
• [PATCH] NUC900: add spi resource plaform_data structure initialization   Wan ZongShun
• [PATCH TRIVIAL] atmel_lcdfb.c: Fix sinfo->irqbase from %lu to %d in dev_info().   Claudio Scordino
  • [PATCH TRIVIAL] atmel_lcdfb.c: Fix sinfo->irqbase from %lu to %d in dev_info().   Jiri Kosina
    • [PATCH TRIVIAL] atmel_lcdfb.c: Fix sinfo->irqbase from %lu to %d in dev_info().   Claudio Scordino
• [rtc-linux] [PATCH] ARM: NUC900: add rtc controller driver support for NUC900   jack wang
  • [rtc-linux] [PATCH] ARM: NUC900: add rtc controller driver support for NUC900   Wan ZongShun
• [PATCH] MX27: Add USB platform devices and resources   Alan Carvalho de Assis
  • [PATCH] MX27: Add USB platform devices and resources   Daniel Mack
    • [PATCH] MX27: Add USB platform devices and resources   Alan Carvalho de Assis
      • [PATCH] MX27: Add USB platform devices and resources   Daniel Mack
      • [PATCH] MX27: Add USB platform devices and resources   Alan Carvalho de Assis
      • [PATCH] MX27: Add USB platform devices and resources   Daniel Mack
    • [PATCH] MX27: Add USB platform devices and resources   Alan Carvalho de Assis
      • [PATCH] MX27: Add USB platform devices and resources   Alan Carvalho de Assis
• arm/common/scoop.c: use resource_size()   H Hartley Sweeten
• arm/mach-pxa/ssp.c: use resource size()   H Hartley Sweeten
• arm/plat-mxc/pwm.c: use resource_size()   H Hartley Sweeten
• arm/plat-pxa/pwm.c: use resource_size()   H Hartley Sweeten
• [PATCH 0/3] mx31moboard: inc patches to mxc-master   Valentin Longchamp
  • [PATCH 0/3] mx31moboard: inc patches to mxc-master   Sascha Hauer
• [PATCH 1/3] mx31: pins used for mx31moboard USB   Valentin Longchamp
• [PATCH 2/3] mx31moboard: SPI corrections   Valentin Longchamp
  • [PATCH 3/3] mx31moboard: support for usbh1 and usbh2   Valentin Longchamp
• spitz: suspend/resume broken in pxa tree   Pavel Machek
• [PATCH] ARM l2x0: check whether l2x0 already enabled   srinidhi kasagar
  • [PATCH] ARM l2x0: check whether l2x0 already enabled   Surinder P Singh
    • [PATCH] ARM l2x0: check whether l2x0 already enabled   srinidhi kasagar
      • [PATCH] ARM l2x0: check whether l2x0 already enabled   Surinder P Singh
      • [PATCH] ARM l2x0: check whether l2x0 already enabled   Catalin Marinas
      • [PATCH] ARM l2x0: check whether l2x0 already enabled   srinidhi kasagar
      • [PATCH] ARM l2x0: check whether l2x0 already enabled   Surinder P Singh
• [PATCH 1/1] WDT clock rate based on returned rate from clk_get_rate   Kevin Wells
• [PATCH 1/1] WDT clock rate based on returned rate from clk_get_rate   Kevin Wells
• MXC Pull request for .33   Sascha Hauer
  • MXC Pull request for .33   Yuasa Yoichi
• frame buffer i.MX31 ADS SHARP LCD   Piotr Rozycki
  • frame buffer i.MX31 ADS SHARP LCD   Daniel Mack
• [PATCH 0/2] VFP save/restore for OMAP3   Tero Kristo
  • [PATCH 1/2] ARM: Implemented support for VFP PM context saving   Tero Kristo
    • [PATCH 1/2] ARM: Implemented support for VFP PM context saving   Russell King - ARM Linux
      • [PATCH 1/2] ARM: Implemented support for VFP PM context saving   Catalin Marinas
      • [PATCH 1/2] ARM: Implemented support for VFP PM context saving   Tero.Kristo at nokia.com
      • [PATCH 1/2] ARM: Implemented support for VFP PM context saving   Russell King - ARM Linux
      • [PATCH 1/2] ARM: Implemented support for VFP PM context saving   Tero.Kristo at nokia.com
• [PATCH 2/2] OMAP3: Implemented VFP restore/save context   Tero Kristo
  • [PATCH 2/2] OMAP3: Implemented VFP restore/save context   Sripathy, Vishwanath
    • [PATCH 2/2] OMAP3: Implemented VFP restore/save context   Tero.Kristo at nokia.com
• USB support on i.MX27   Alan Carvalho de Assis
  • USB support on i.MX27   Daniel Mack
    • USB support on i.MX27   Alan Carvalho de Assis
      • USB support on i.MX27   Daniel Mack
  • USB support on i.MX27   javier Martin
    • USB support on i.MX27   Daniel Mack
      • USB support on i.MX27   Alan Carvalho de Assis
      • USB support on i.MX27   Alan Carvalho de Assis
• IXP425: help on HSS channelized service   Davide Di Gesualdo
  • IXP425: help on HSS channelized service   Juergen Schindele
    • IXP425: help on HSS channelized service   Krzysztof Halasa
    • IXP425: help on HSS channelized service   Davide Di Gesualdo
  • IXP425: help on HSS channelized service   Krzysztof Halasa
    • IXP425: help on HSS channelized service   Juergen Schindele
      • IXP425: help on HSS channelized service   Russell King - ARM Linux
      • IXP425: help on HSS channelized service   Juergen Schindele
      • IXP425: help on HSS channelized service   Russell King - ARM Linux
      • IXP425: help on HSS channelized service   Krzysztof Halasa
      • IXP425: help on HSS channelized service   Krzysztof Halasa
      • IXP425: help on HSS channelized service   Juergen Schindele
      • IXP425: help on HSS channelized service   Krzysztof Halasa
      • IXP425: help on HSS channelized service   Juergen Schindele
• i.MX31 LCD   Piotr Rozycki
• [PATCH] Flush the D-cache during copy_user_highpage()   Catalin Marinas
  • [PATCH] Flush the D-cache during copy_user_highpage()   Russell King - ARM Linux
    • [PATCH] Flush the D-cache during copy_user_highpage()   Catalin Marinas
      • [PATCH] Flush the D-cache during copy_user_highpage()   Russell King - ARM Linux
      • [PATCH] Flush the D-cache during copy_user_highpage()   Catalin Marinas
      • [PATCH] Flush the D-cache during copy_user_highpage()   Russell King - ARM Linux
• [PATCH] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
  • [PATCH] mx27: Add basic support for Maxtrack i-MXT TD60   Russell King - ARM Linux
    • [PATCH] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
• [PATCH 0/3] add support for Marvell's Dove SoC   Saeed Bishara
  • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Saeed Bishara
• [PATCH 2/3] Add Tauros2 L2 cache controller support   Saeed Bishara
  • [PATCH 3/3] rtc: add support for Dove soc to the rtc-mv driver.   Saeed Bishara
• [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
  • [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   saeed bishara
    • [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
      • [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   Sascha Hauer
  • [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   Fabio Estevam
    • [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   Sascha Hauer
    • [PATCH v2] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
• [PATCH 15/38] move s3c_adc_remove to .devexit.text   Uwe Kleine-König
• [PATCH 16/38] move s3c_pwm_remove to .devexit.text   Uwe Kleine-König
  • [PATCH 16/38] move s3c_pwm_remove to .devexit.text   Peter Korsgaard
• [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Saeed Bishara
  • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Russell King - ARM Linux
    • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Nicolas Pitre
      • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   saeed bishara
      • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Nicolas Pitre
      • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Russell King - ARM Linux
      • [PATCH 1/3] ARM: add base support for Marvell Dove SoC   Nicolas Pitre
• [PATCH] VIC: add the Software priority masking code for PL192   김현웅
• Changing HZ value in linux kernel   Robert Garrett
  • Changing HZ value in linux kernel   Uwe Kleine-König
• ARM: pxa: add support for Raumfeld audio devices   Daniel Mack
  • [PATCH 01/17] ARM: pxa/raumfeld: add basic structure for devices   Daniel Mack
    • [PATCH 01/17] ARM: pxa/raumfeld: add basic structure for devices   Mike Rapoport
      • [PATCH 01/17] ARM: pxa/raumfeld: add basic structure for devices   Daniel Mack
      • [PATCH 01/17] ARM: pxa/raumfeld: add basic structure for devices   Marek Vasut
      • [PATCH 01/17] ARM: pxa/raumfeld: add basic structure for devices   Russell King - ARM Linux
  • [PATCH 02/17] ARM: pxa/raumfeld: add GPIO definitions   Daniel Mack
  • [PATCH 03/17] ARM: pxa/raumfeld: add SMSC9220 ethernet support   Daniel Mack
    • [PATCH 03/17] ARM: pxa/raumfeld: add SMSC9220 ethernet support   Mike Rapoport
      • [PATCH 03/17] ARM: pxa/raumfeld: add SMSC9220 ethernet support   Daniel Mack
      • [PATCH 03/17] ARM: pxa/raumfeld: add SMSC9220 ethernet support   Russell King - ARM Linux
      • [PATCH 03/17] ARM: pxa/raumfeld: add SMSC9220 ethernet support   Daniel Mack
  • [PATCH 04/17] ARM: pxa/raumfeld: add OHCI function   Daniel Mack
  • [PATCH 05/17] ARM: pxa/raumfeld: add rotary encoder support   Daniel Mack
    • [PATCH 05/17] ARM: pxa/raumfeld: add rotary encoder support   Mike Rapoport
      • [PATCH 05/17] ARM: pxa/raumfeld: add rotary encoder support   Daniel Mack
      • [PATCH 05/17] ARM: pxa/raumfeld: add rotary encoder support   Russell King - ARM Linux
  • [PATCH 06/17] ARM: pxa/raumfeld: add GPIO buttons   Daniel Mack
  • [PATCH 07/17] ARM: pxa/raumfeld: add GPIO connected LEDs   Daniel Mack
  • [PATCH 08/17] ARM: pxa/raumfeld: add one-wire function   Daniel Mack
    • [PATCH 08/17] ARM: pxa/raumfeld: add one-wire function   Russell King - ARM Linux
  • [PATCH 09/17] ARM: pxa/raumfeld: add NAND partitions   Daniel Mack
    • [PATCH 09/17] ARM: pxa/raumfeld: add NAND partitions   Mike Rapoport
  • [PATCH 10/17] ARM: pxa/raumfeld: add framebuffer and backlight devices   Daniel Mack
  • [PATCH 11/17] ARM: pxa/raumfeld: add SPI controlled devices   Daniel Mack
  • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Daniel Mack
    • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Mark Brown
      • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Daniel Mack
      • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Mark Brown
      • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Daniel Mack
      • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Mark Brown
    • [PATCH 12/17] ARM: pxa/raumfeld: add audio related functions   Russell King - ARM Linux
  • [PATCH 13/17] ARM: pxa/raumfeld: add Marvell Libertas via SDIO   Daniel Mack
    • [PATCH 13/17] ARM: pxa/raumfeld: add Marvell Libertas via SDIO   Mark Brown
      • [PATCH 13/17] ARM: pxa/raumfeld: add Marvell Libertas via SDIO   Daniel Mack
      • [PATCH 13/17] ARM: pxa/raumfeld: add Marvell Libertas via SDIO   Mark Brown
  • [PATCH 14/17] ARM: pxa/raumfeld: add power supply framework   Daniel Mack
  • [PATCH 15/17] ARM: pxa/raumfeld: add support for I2C controlled devices   Daniel Mack
  • [PATCH 16/17] ALSA: ARM: add Raumfeld audio support   Daniel Mack
    • [PATCH 16/17] ALSA: ARM: add Raumfeld audio support   Mark Brown
      • [PATCH 16/17] ALSA: ARM: add Raumfeld audio support   Daniel Mack
      • [PATCH 16/17] ALSA: ARM: add Raumfeld audio support   Mark Brown
      • [PATCH 16/17] ALSA: ARM: add Raumfeld audio support   Daniel Mack
  • [PATCH 17/17] ARM: pxa/raumfeld: Add defconfig   Daniel Mack
  • ARM: pxa: add support for Raumfeld audio devices   Mike Rapoport
    • ARM: pxa: add support for Raumfeld audio devices   Daniel Mack
• [PATCH] pxa/hx4700: actually use platform_lcd driver   Dmitry Artamonow
  • [PATCH] pxa/hx4700: actually use platform_lcd driver   pHilipp Zabel
    • [PATCH] pxa/hx4700: actually use platform_lcd driver   Eric Miao
• [PATCH] pxa: fix gpio_to_irq() for GPIOs on expander chips   Dmitry Artamonow
• [PATCH V3] ARM: NUC900: add RTC driver support for nuc910 and nuc920   Wan ZongShun
  • [PATCH V3] ARM: NUC900: add RTC driver support for nuc910 and nuc920   Hu Ruihuan
    • [rtc-linux] Re: [PATCH V3] ARM: NUC900: add RTC driver support for nuc910 and nuc920   Alessandro Zummo
  • [PATCH V3] ARM: NUC900: add RTC driver support for nuc910 and nuc920   Alessandro Zummo
    • [PATCH V3] ARM: NUC900: add RTC driver support for nuc910 and nuc920   Wan ZongShun
• [PATCH v3] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
  • [PATCH v3] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
• IXP425: help on HSS channelized service   Davide Di Gesualdo
• [ LPC3250 ] discontinuous DDR-Ram : problem of write buffer coherency   Pierre Savary
  • [ LPC3250 ] discontinuous DDR-Ram : problem of write buffer coherency   Russell King - ARM Linux
• [PATCH V2] Add i.MX sound support   Sascha Hauer
  • [PATCH 1/3] ASoC: Add a new imx-ssi sound driver   Sascha Hauer
    • [PATCH 1/3] ASoC: Add a new imx-ssi sound driver   Mark Brown
      • [PATCH 1/3] ASoC: Add a new imx-ssi sound driver   javier Martin
      • [PATCH 1/3] ASoC: Add a new imx-ssi sound driver   javier Martin
  • [alsa-devel] [PATCH V2] Add i.MX sound support   javier Martin
• [PATCH 2/3] ASoC: add phycore-ac97 sound support   Sascha Hauer
  • [PATCH 3/3] ASoC i.MX: remove old i.MX driver   Sascha Hauer
    • [PATCH 3/3] ASoC i.MX: remove old i.MX driver   Mark Brown
  • [PATCH 2/3] ASoC: add phycore-ac97 sound support   Mark Brown
• [PATCH v4] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
  • [PATCH v4] mx27: Add basic support for Maxtrack i-MXT TD60   Sascha Hauer
    • [PATCH v4] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
      • [PATCH v4] mx27: Add basic support for Maxtrack i-MXT TD60   Daniel Mack
      • [PATCH v4] mx27: Add basic support for Maxtrack i-MXT TD60   Alan Carvalho de Assis
• [PATCH] MXC: set GPIO IRQ handler   John Ogness
  • [PATCH] MXC: set GPIO IRQ handler   Uwe Kleine-König
    • [PATCH] MXC: set GPIO IRQ handler   Thomas Gleixner
      • [PATCH] MXC: set GPIO IRQ handler   Uwe Kleine-König
      • [PATCH] MXC: set GPIO IRQ handler   Thomas Gleixner
      • [PATCH] MXC: set GPIO IRQ handler   Uwe Kleine-König
      • [PATCH] MAINTAINERS: add tree and file pattern for ARM IMX   Uwe Kleine-König
      • [PATCH v2] MAINTAINERS: add tree and file pattern for ARM IMX   Uwe Kleine-König
• [PATCH] omap: Split i2c platform init for mach-omap1 and mach-omap2   Tony Lindgren
• [PATCH 1/1] Remove suspend/resume functionality, add dynamic clocking   Kevin Wells
  • [PATCH 1/1] Remove suspend/resume functionality, add dynamic clocking   Uwe Kleine-König
    • [PATCH 1/1] Remove suspend/resume functionality, add dynamic clocking   Russell King - ARM Linux
    • [PATCH 1/1] Remove suspend/resume functionality, add dynamic clocking   Kevin Wells
  • [PATCH 1/1] Remove suspend/resume functionality, add dynamic clocking   Russell King - ARM Linux
• [PATCH 0/8] Series short description   Tony Lindgren
  • [PATCH 0/8] Series short description   Hemanth V
    • [PATCH 0/8] Series short description   Tony Lindgren
  • [PATCH 0/8] Series short description   Shilimkar, Santosh
• [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write}   Tony Lindgren
  • [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write}   Shilimkar, Santosh
    • [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write}   Tony Lindgren
• [PATCH 2/8] omap: mux: Add new style pin multiplexing code for omap3   Tony Lindgren
• [PATCH 3/8] omap: mux: Add new style pin multiplexing data for 34xx   Tony Lindgren
• [PATCH 4/8] omap: mux: Add new style init functions to omap3 board-*.c files   Tony Lindgren
• [PATCH 5/8] omap: mux: Add debugfs support for new mux code   Tony Lindgren
• [PATCH 6/8] omap: Split i2c platform init for mach-omap1 and mach-omap2   Tony Lindgren
  • [PATCH 6/8] omap: Split i2c platform init for mach-omap1 and mach-omap2   Tony Lindgren
• [PATCH 7/8] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions   Tony Lindgren
• [PATCH 8/8] omap: mux: Remove old mux code for 34xx   Tony Lindgren
• [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)   Tony Lindgren
  • [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)   Mike Rapoport
    • [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)   Tony Lindgren
  • [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)   Tony Lindgren
• Patches for S3C64XX SPI controller driver   Jassi Brar
  • Patches for S3C64XX SPI controller driver   Baruch Siach
    • Patches for S3C64XX SPI controller driver   jassi brar
• [PATCH 1/5] SPI S3C64XX: Add SPI controller register base   Jassi Brar
• [PATCH 2/5] SPI S3C64XX: Define SPI-48M clock sources   Jassi Brar
• [PATCH 3/5] SPI S3C64XX: Header for passing platform data   Jassi Brar
• [PATCH 4/5] SPI S3C64XX: Define SPI controller platform devices   Jassi Brar
• [PATCH 5/5] SPI S3C64XX: SPI Controller driver for S3C64XX   Jassi Brar
  • [PATCH 5/5] SPI S3C64XX: SPI Controller driver for S3C64XX   Grant Likely
    • [PATCH 5/5] SPI S3C64XX: SPI Controller driver for S3C64XX   jassi brar
• [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Uwe Kleine-König
  • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Russell King - ARM Linux
    • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Russell King - ARM Linux
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Uwe Kleine-König
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Thomas Gleixner
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Russell King - ARM Linux
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Uwe Kleine-König
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Russell King - ARM Linux
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Thomas Gleixner
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Russell King - ARM Linux
      • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Thomas Gleixner
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Uwe Kleine-König
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Thomas Gleixner
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Uwe Kleine-König
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Thomas Gleixner
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   David Brownell
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Jamie Lokier
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Uwe Kleine-König
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Jamie Lokier
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Russell King - ARM Linux
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Jamie Lokier
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Uwe Kleine-König
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   Thomas Gleixner
      • [PATCH] warn about shared irqs requesting IRQF_DISABLED registered with setup_irq   David Brownell
      • [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED at the right place   Uwe Kleine-König
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Peter Zijlstra
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Alan Cox
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Russell King - ARM Linux
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Alan Cox
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Russell King - ARM Linux
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Andrew Victor
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   David Brownell
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   David Brownell
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Andy Walls
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Benjamin Herrenschmidt
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Benjamin Herrenschmidt
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Russell King - ARM Linux
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Russell King - ARM Linux
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Alan Cox
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Alan Cox
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Nicolas Pitre
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Uwe Kleine-König
      • Get rid of IRQF_DISABLED - (was [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED)   Thomas Gleixner
      • [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED at the right place   David Brownell
      • [PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED at the right place   Uwe Kleine-König
  • [RESENT PATCH] Don't disable irqs in set_next_event and set_mode callbacks   Eric Miao
• [PATCH V2] ARM: NUC900: add GDMA driver support for nuc900 platform   Hu Ruihuan
  • [PATCH V2] ARM: NUC900: add GDMA driver support for nuc900 platform   Wan ZongShun
  • [PATCH V2] ARM: NUC900: add GDMA driver support for nuc900 platform   Russell King - ARM Linux
• [PATCH] MMC: pxamci: call pdata->setpower even when regulator is used   Daniel Mack
• [patch] Add USB Gadget support for mx35pdk   Harro Haan
  • [patch v2 0/2] Add USB Gadget support for mx35pdk   Harro Haan
• [patch] Add USB Gadget support for mx35pdk   Daniel Mack
• [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs   Bartlomiej Zolnierkiewicz
  • [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs   Alan Cox
  • [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs   Ryan Mallon
    • [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs   João Ramos
• [alsa-devel] [PATCH V2] Add i.MX sound support   Mark Brown
• ARM: pxa: add support for Raumfeld audio devices [v2]   Daniel Mack
  • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Daniel Mack
    • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Marek Vasut
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Daniel Mack
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Russell King - ARM Linux
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Marek Vasut
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Russell King - ARM Linux
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Marek Vasut
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Russell King - ARM Linux
    • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Eric Miao
      • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Daniel Mack
• [PATCH 2/3] ALSA: ARM: add Raumfeld audio support   Daniel Mack
  • [PATCH 3/3] ARM: pxa/raumfeld: Add defconfig   Daniel Mack
  • [PATCH 2/3] ALSA: ARM: add Raumfeld audio support   Mark Brown
    • [PATCH 2/3] ALSA: ARM: add Raumfeld audio support   Daniel Mack
• [PATCH v4 0/6] ARM: ST-Ericsson's U8500 SMP platform, a new patch set   srinidhi kasagar
  • [PATCH v4 0/6] ARM: ST-Ericsson's U8500 SMP platform, a new patch set   Russell King - ARM Linux
    • [PATCH v4 0/6] ARM: ST-Ericsson's U8500 SMP platform, a new patch set   Russell King - ARM Linux
      • [PATCH v4 0/6] ARM: ST-Ericsson's U8500 SMP platform, a new patch set   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/6] ARM: U8500 register definitions   srinidhi kasagar
• [PATCH v4 2/6] ARM: U8500 clock framework   srinidhi kasagar
• [PATCH v4 3/6] ARM: U8500 core machine support   srinidhi kasagar
• [PATCH v4 4/6] ARM: U8500 Makefile.boot   srinidhi kasagar
• [PATCH v4 5/6] ARM nomadik: enable U8500 for common platform   srinidhi kasagar
• [PATCH v4 6/6] ARM: U8500 integrate to ARM architecture   srinidhi kasagar
• Git pull request: Orion/Kirkwood/Dove stuff for next merge window   Nicolas Pitre
  • Git pull request: Orion/Kirkwood/Dove stuff for next merge window   Nicolas Pitre
    • Git pull request: Orion/Kirkwood/Dove stuff for next merge window   Russell King - ARM Linux
• [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Subbrathnam, Swaminathan
• Disabling MMU Option for arm946E processor   Girish KS
• [PATCH] arm: convert /proc/cpu/aligment to seq_file   Alexey Dobriyan
• [patch] spitz: better voltage-to-percentage conversion   Pavel Machek
  • [patch] spitz: better voltage-to-percentage conversion   Eric Dumazet
  • [patch] spitz: better voltage-to-percentage conversion   Russell King - ARM Linux
    • [patch] spitz: better voltage-to-percentage conversion   Pavel Machek
• [patch] Add USB Gadget support for mx35pdk   Sascha Hauer
• [alsa-devel] [PATCH V2] Add i.MX sound support   Sascha Hauer
  • [alsa-devel] [PATCH V2] Add i.MX sound support   javier Martin
    • [alsa-devel] [PATCH V2] Add i.MX sound support   Sascha Hauer
      • [alsa-devel] [PATCH V2] Add i.MX sound support   javier Martin
• [patch v2 1/2] mx35: register usb_ahb clock in clock-imx35.c   Harro Haan
• [patch v2 2/2] mx35: add usb gadget support in mx35pdk.c   Harro Haan
• ARM: pxa: add support for Raumfeld audio devices [v3]   Daniel Mack
  • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Daniel Mack
    • [PATCH 2/3] ALSA: ARM: add Raumfeld audio support   Daniel Mack
      • [PATCH 3/3] ARM: pxa/raumfeld: Add defconfig   Daniel Mack
      • [PATCH 3/3] ARM: pxa/raumfeld: Add defconfig   Eric Miao
      • [PATCH 3/3] ARM: pxa/raumfeld: Add defconfig   Daniel Mack
      • [PATCH 2/3] ALSA: ARM: add Raumfeld audio support   Mark Brown
    • [PATCH 1/3] ARM: pxa/raumfeld: add platform support   Eric Miao
• [PATCH] mx27: mxt_td60: Add support to SD/MMC   Alan Carvalho de Assis
• [PATCH 0/7] S3C64XX IISv4 support   Mark Brown
  • [PATCH 1/7] S3C64XX: Staticise platform data for PCM devices   Mark Brown
    • [PATCH 1/7] S3C64XX: Staticise platform data for PCM devices   jassi brar
  • [PATCH 2/7] S3C6410: Correct names of IISv4 data output pin definitions   Mark Brown
  • [PATCH 3/7] S3C64XX: Add support for CLK_SRC2 configured clocks   Mark Brown
    • [PATCH 3/7] S3C64XX: Add support for CLK_SRC2 configured clocks   jassi brar
  • [PATCH 4/7] S3C64XX: Declare IISv4 PCLK for S3C6410   Mark Brown
  • [PATCH 5/7] S3C6410: Define CLK_AUDIO2 for IISv4 block   Mark Brown
  • [PATCH 6/7] S3C6410: Use platform data to supply pin configuration for IISv4   Mark Brown
    • [PATCH 6/7] S3C6410: Use platform data to supply pin configuration for IISv4   jassi brar
  • [PATCH 7/7] SMDK6410: Register IISv4 device   Mark Brown
• ARM: gta02: Add Button, LED and Vibrator support   Lars-Peter Clausen
  • [PATCH] ARM: gta02: Add button support   Lars-Peter Clausen
    • [PATCH] ARM: gta02: Add button support   Pavel Machek
• [PATCH] ARM: gta02: Add LED support   Lars-Peter Clausen
  • [PATCH] ARM: gta02: Add vibrator support   Lars-Peter Clausen
    • [PATCH] ARM: gta02: Add vibrator support   Pavel Machek
• [PATCH] ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlier   Lars-Peter Clausen
  • [PATCH] ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlier   Pavel Machek
    • [PATCH] ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlier   Lars-Peter Clausen
      • [PATCH] ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlier   Pavel Machek
      • [PATCH] ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlier   Jamie Lokier
• [PATCH 6/9] add gpiolib support to ucb1x00   Russell King - ARM Linux
  • [PATCH 6/9] add gpiolib support to ucb1x00   Thomas Kunze
• [PATCH] [AT91] Add support for the Daricom C3-Ax03 board   Patrick Bellasi
  • [PATCH] [AT91] Add support for the Daricom C3-Ax03 board   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 0/3] Add support for Daricom C3-Ax03 board   Patrick Bellasi
      • [PATCH 1/3] AT91: update at91_eth_data for ETX2-3 on PA10-11   Patrick Bellasi
      • [PATCH 2/3] [AT91] Add support for the Daricom C3-Ax03 board   Patrick Bellasi
      • [PATCH 3/3] [AT91] Add defconfig for the Daricom C3-Ax03 board   Patrick Bellasi
      • [PATCH 2/3] [AT91] Add support for the Daricom C3-Ax03 board   Russell King - ARM Linux
      • [PATCH 1/3] AT91: update at91_eth_data for ETX2-3 on PA10-11   Karl Olsen
      • [PATCH 1/3] AT91: update at91_eth_data for ETX2-3 on PA10-11   Andrew Victor
      • [PATCH 1/3] AT91: update at91_eth_data for ETX2-3 on PA10-11   Jean-Christophe PLAGNIOL-VILLARD
• my IXP4xx git tree   Krzysztof Halasa
  • my IXP4xx git tree   Russell King - ARM Linux
    • my IXP4xx git tree   Krzysztof Halasa
• [PATCH] gpio: pca953x: add support for MAX7312   Jun Nie
• gpio: pca953x: add support for MAX7312   Eric Miao
  • gpio: pca953x: add support for MAX7312   David Brownell
    • gpio: pca953x: add support for MAX7312   Eric Miao
• Disabling MMU in latest kernel   Girish KS
• [patch] spitz: better voltage-to-percentage conversion   Pavel Machek
• [PATCH V4]ARM: NUC900: add RTC driver support for nuc910 and nuc920   Wan ZongShun
  • [PATCH V4]ARM: NUC900: add RTC driver support for nuc910 and nuc920   Andrew Morton
• [PATCH] ARM U8500: add defconfig   srinidhi kasagar
• [patch v2 0/2] Add USB Gadget support for mx35pdk   Sascha Hauer
• [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Sascha Hauer
  • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   javier Martin
• [PATCH] i.MX27 audmux: Fix register offsets   Sascha Hauer
• [PATCH] i.MX27 audmux: Fix register offsets   Sascha Hauer
• [PATCH] i.MX27 audmux: Fix register offsets   Sascha Hauer
• [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Sascha Hauer
  • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   javier Martin
• [alsa-devel] [PATCH V2] Add i.MX sound support   Sascha Hauer
  • [alsa-devel] [PATCH V2] Add i.MX sound support   javier Martin
• [alsa-devel] [PATCH V2] Add i.MX sound support   Sascha Hauer
• [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Sascha Hauer
  • [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   javier Martin
• [PATCH 8/9 v2] MXC: Add a digital audio multiplexer driver   Sascha Hauer
• [PATCH 1/3] AT91: update at91_eth_data for ETX2-3 on PA10-11   Tim Barr
• [PATCH] ARM U8500: add MAINTAINERS entry   srinidhi kasagar
• Samsung clock changes   Ben Dooks
  • [clocks] ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung   Ben Dooks
  • [clocks] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c   Ben Dooks
  • [clocks] ARM: S3C64XX: Compress s3c6400-clock.c code   Ben Dooks
  • [clocks] ARM: SAMSUNG: Add core clock implementation for clksrc based clocks   Ben Dooks
  • [clocks] ARM: S3C64XX: Use new clock-clksrc.c code for clocks.   Ben Dooks
  • [clocks] ARM: S3C64XX: Remove unused clock definitions from clock header   Ben Dooks
  • [clocks] ARM: SAMSUNG: Reduce size of struct clk.   Ben Dooks
• strace failure on ARM Linux 2.6.31-rc7 running on TI OMAP3 hardware   Konstantin Malolin