[PATCH 1/1] Remove suspend/resume functionality, add dynamic clocking
Kevin Wells
kevin.wells at nxp.com
Wed Nov 25 16:23:21 EST 2009
Remove suspend/resume functionality, I2C driver gates clock on
only when an I2C transaction is in progress
Signed-off-by: Kevin Wells <kevin.wells at nxp.com>
---
drivers/i2c/busses/i2c-pnx.c | 35 +++++++----------------------------
1 files changed, 7 insertions(+), 28 deletions(-)
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index cd4805d..c3c5425 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -453,6 +453,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
__func__, num, ioread32(I2C_REG_STS(alg_data)));
+ clk_enable(alg_data->clk);
+
bus_reset_if_active(adap);
/* Process transactions in a loop. */
@@ -521,6 +523,8 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
bus_reset_if_active(adap);
+ clk_disable(alg_data->clk);
+
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
@@ -544,31 +548,6 @@ static struct i2c_algorithm pnx_algorithm = {
.functionality = i2c_pnx_func,
};
-#ifdef CONFIG_PM
-static int i2c_pnx_controller_suspend(struct platform_device *pdev,
- pm_message_t state)
-{
- struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
- struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
-
- /* FIXME: shouldn't this be clk_disable? */
- clk_enable(alg_data->clk);
-
- return 0;
-}
-
-static int i2c_pnx_controller_resume(struct platform_device *pdev)
-{
- struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
- struct i2c_pnx_algo_data *alg_data = i2c_pnx->adapter->algo_data;
-
- return clk_enable(alg_data->clk);
-}
-#else
-#define i2c_pnx_controller_suspend NULL
-#define i2c_pnx_controller_resume NULL
-#endif
-
static int __devinit i2c_pnx_probe(struct platform_device *pdev)
{
unsigned long tmp;
@@ -664,6 +643,9 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+ /* Disable clock until needed */
+ clk_disable(alg_data->clk);
+
return 0;
out_irq:
@@ -690,7 +672,6 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
free_irq(alg_data->irq, alg_data);
i2c_del_adapter(adap);
- clk_disable(alg_data->clk);
iounmap((void *)alg_data->ioaddr);
release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
clk_put(alg_data->clk);
@@ -706,8 +687,6 @@ static struct platform_driver i2c_pnx_driver = {
},
.probe = i2c_pnx_probe,
.remove = __devexit_p(i2c_pnx_remove),
- .suspend = i2c_pnx_controller_suspend,
- .resume = i2c_pnx_controller_resume,
};
static int __init i2c_adap_pnx_init(void)
--
1.6.0.6
More information about the linux-arm-kernel
mailing list