[PATCH 1/9] SMDK6410: Configure GPIO pull up for WM835x IRQ line

[Mark Brown]

When used with the WM1190-EV1 board we can use the internal pull up
resistor of the CPU to provide the required pull for the IRQ line.
Without this interrupts from the WM835x don't work in the default
WM1190-EV1 hardwaer configuration.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index ea51dbe..9f1a214 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
 {
 	int i;
 
+	/* Configure the IRQ line */
+	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
 	/* Instantiate the regulators */
 	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
 		wm8350_register_regulator(wm8350,
-- 
1.6.5.2