[PATCH 2/3] pcm990-baseboard: don't use pxa_camera init() callback

Antonio Ospite ospite at studenti.unina.it
Tue Nov 17 17:04:22 EST 2009


pxa_camera init() is going to be removed.
Configure PXA CIF pins directly in machine init function.

Signed-off-by: Antonio Ospite <ospite at studenti.unina.it>
---
 arch/arm/mach-pxa/pcm990-baseboard.c |    8 +-------
 1 files changed, 1 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index bbda570..d5255ae 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = {
 	GPIO44_CIF_LV,
 };
 
-static int pcm990_pxacamera_init(struct device *dev)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
-	return 0;
-}
-
 /*
  * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
  *	MCLK_EN:	Master clock is generated by PXA
  *	PCP:		Data sampled on the falling edge of pixel clock
  */
 struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
-	.init	= pcm990_pxacamera_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
 	.mclk_10khz = 1000,
@@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
-- 
1.6.5.2




More information about the linux-arm-kernel mailing list