[PATCH 5/6] pxa: add gpio expander on pxa168 aspenite platform

[Jun Nie]

2009/11/3 Jun Nie <niej0001 at gmail.com>:
> pxa: add gpio expander on pxa168 aspenite platform
>
> Signed-off-by: Jun Nie <njun at marvell.com>
> ---
>  arch/arm/mach-mmp/aspenite.c |   45 ++++++++++++++++++++++++++++++++++++++++++
>  drivers/gpio/pca953x.c       |    1 +
>  2 files changed, 46 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
> index 115f728..b422bb5 100644
> --- a/arch/arm/mach-mmp/aspenite.c
> +++ b/arch/arm/mach-mmp/aspenite.c
> @@ -16,6 +16,7 @@
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/partitions.h>
>  #include <linux/mtd/nand.h>
> +#include <linux/i2c/pca953x.h>
>
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> @@ -24,9 +25,14 @@
>  #include <mach/pxa168.h>
>  #include <mach/gpio.h>
>  #include <plat/pxa3xx_nand.h>
> +#include <video/pxa168fb.h>
>
>  #include "common.h"
>
> +/*used by expander max7312, 16 pins gpio expander */
> +#define GPIO_EXT0(x)           (NR_BUILTIN_GPIO + (x))
> +#define GPIO_EXT1(x)           (NR_BUILTIN_GPIO + 16 + (x))
> +
>  static unsigned long common_pin_config[] __initdata = {
>        /* Data Flash Interface */
>        GPIO0_DFI_D15,
> @@ -134,6 +140,44 @@ static void __init apn_init_nand(void)
>  static void __init apn_init_nand(void) {}
>  #endif
>
> +static struct i2c_pxa_platform_data pwri2c_info __initdata = {
> +       .use_pio                = 1,
> +};
> +
> +#if defined(CONFIG_GPIO_PCA953X)
> +/* GPIO expander max7312 could reuse PCA953X */
> +static struct pca953x_platform_data max7312_data[] = {
> +       /* two max7312 in system */
> +
> +       [0] = {
> +               .gpio_base      = GPIO_EXT0(0),
> +       },
> +
> +       [1] = {
> +               .gpio_base      = GPIO_EXT1(0),
> +       },
> +};
> +#endif
> +
> +static struct i2c_board_info aspenite_i2c_board_info[] = {
> +
> +#if defined(CONFIG_GPIO_PCA953X)
> +       {
> +               .type           = "max7312",
> +               .addr           = 0x10,                 /* 0x20/0x21 */
> +               .irq            = IRQ_GPIO(122),
> +               .platform_data  = &max7312_data[0],
> +       },
> +
> +       {
> +               .type           = "max7312",
> +               .addr           = 0x20,                 /* 0x40/0x41 */
> +               .irq            = IRQ_GPIO(120),
> +               .platform_data  = &max7312_data[1],
> +       },
> +#endif
> +};
> +
>  static void __init common_init(void)
>  {
>        mfp_config(ARRAY_AND_SIZE(common_pin_config));
> @@ -142,6 +186,7 @@ static void __init common_init(void)
>        pxa168_add_uart(1);
>
>        apn_init_nand();
> +       pxa168_add_twsi(0, &pwri2c_info, ARRAY_AND_SIZE(aspenite_i2c_board_info));
>
>        /* off-chip devices */
>        platform_device_register(&smc91x_device);
> diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
> index 6a2fb3f..7822684 100644
> --- a/drivers/gpio/pca953x.c
> +++ b/drivers/gpio/pca953x.c
> @@ -39,6 +39,7 @@ static const struct i2c_device_id pca953x_id[] = {
>        { "pca9557", 8, },
>
>        { "max7310", 8, },
> +       { "max7312", 16, },
>        { "max7315", 8, },
>        { "pca6107", 8, },
>        { "tca6408", 8, },
> --
> 1.5.4.3
>
add linux-fbdev at vger.kernel.org