orion/kirkwood pcie issue still open with 2.6.32-rc6 (marvell stock 2.6.22.18 works!)
Dieter Kiermaier
dk-arm-linux at gmx.de
Wed Nov 11 09:29:22 EST 2009
Hi again,
> Am Montag 09 November 2009 09:49:58 schrieb Simon Kagstrom:
> > On Mon, 9 Nov 2009 09:33:46 +0100
> > Dieter Kiermaier <dk-arm-linux at gmx.de> wrote:
> >
> > > Ronan Shitrit from marvell gave me the information to clear bit 2 of physical
> > > address 0xf1020100 to enable bus scanning.
> > > I don't know what this really does but it helped to get my kernel up and running.
> >
I've tested again:
with 2.6.22.18 marvell stock kernel my fpga behing the pcie->pci bridge works as expected.
Here is the output of lscpi:
sh-3.2# uname -a
Linux DB88FXX81 2.6.22.18 #1 Wed Apr 22 20:31:28 IST 2009 armv5tejl GNU/Linux
sh-3.2#
sh-3.2# lspci -vv
00:01.0 Class 0604: Device 11ab:2211 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=240
I/O behind bridge: 00001000-00004fff
Memory behind bridge: e8000000-ebffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort+ >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [48] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] #11ab
Capabilities: [221] #f0e8
Capabilities: [f1e] #2a0
Capabilities: [e80] #187
01:08.0 Class ff00: Device 1731:0101 (rev 10)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr+ DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Region 1: I/O ports at <ignored>
Kernel driver in use: ArtistaNET-III frame buffer driver
If I switch to mainline linux kernel (there is no difference between openrd, vanilla, orion.git kernels!) my problems start:
I have to patch openrd_init() as follows:
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 77617c7..670312b 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -14,6 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
+#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -76,9 +77,21 @@ static void __init openrd_base_init(void)
static int __init openrd_base_pci_init(void)
{
+ u32 cpu_config_reg;
+ void __iomem *base;
+
+ base = ioremap(0xf1020100, 4);
+ if (base)
+ {
+ cpu_config_reg = readl(base);
+ cpu_config_reg &= ~(1 << 2);
+ writel(cpu_config_reg, base);
+ printk("register 0x20100: %x\n", readl(base));
+ }
+ iounmap(base);
if (machine_is_openrd_base())
kirkwood_pcie_init();
-
+
return 0;
}
subsys_initcall(openrd_base_pci_init);
----
to allow my system to boot up and after succesfully boot my pci device isn't reachable - without any errors / warnings!
I've enabled printk (echo 8 > /proc/sys/kernel/printk) and still no console output.
sh-3.2# uname -a
Linux DB88FXX81 2.6.32-rc6-00014-g92bdfb9-dirty #3 PREEMPT Wed Nov 11 15:10:49 CET 2009 armv5tel GNU/Linux
sh-3.2#
sh-3.2# lspci -vv
00:00.0 Class 0580: Device 11ab:6281 (rev 02)
Subsystem: Device 11ab:11ab
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at <ignored> (64-bit, prefetchable)
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
00:01.0 Class 0604: Device 11ab:2211 (rev 01)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00004fff
Memory behind bridge: e0000000-e3ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA- MAbort+ >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [48] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
01:08.0 Class ff00: Device 1731:0101 (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr+ DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [disabled] [size=64M]
Region 1: I/O ports at <unassigned> [disabled]
sh-3.2#
I hope someone from marvell will help me to solve this problem. I don't want to stick with 2.6.22 kernel!
It looks like the problem during boot up will show me that something went wrong but I've absolutely no idea
how to solve this problem :(
Many thanks for helping,
Dieter
> > You have that in the functional specification for the kirkwood
> > processors:
> >
> > http://www.marvell.com/files/products/embedded_processors/kirkwood/FS_88F6180_9x_6281_OpenSource.pdf
> >
> > See Appendix A for the register set and lookup address 0x20100 (the CPU
> > configuration register). Bit 2 in that register turns on/off error
> > propagation:
> >
> > Mbus-L Error propogation
> > For a list of errors see "Error Handling".
> > 0 = NoErrProp: Error indications are not propagated to Mbus-L. The
> > transactions are completed normally.
> > 1 = ErrProp: Error indications are propagated to Mbus-L.
> >
> > and clearing it sounds quite a bit like hiding the real problem :-).
> >
>
> I've seen this and you're absolutely right. Thats why I've posted!
>
> >
> > Probably it's best to try to find out what's causing this error (see
> > the Error Handling section of the PCIe chapter in the reference manual
> > above) so that that a proper fix can be implemented!
>
> And here my problems are starting ;)
> How can I implement error handling for that kind of reported errors?
> I'm sorry but I've absolutely no idea.
>
> >
> > // Simon
>
> Many thanks,
> Dieter
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
More information about the linux-arm-kernel
mailing list