[PATCH 2/3] ezx: Add leds-lp3944 support for A910 EZX phone

[Eric Miao]

This patch looks good, will apply later.

On Wed, Nov 4, 2009 at 12:45 AM, Antonio Ospite
<ospite at studenti.unina.it> wrote:
> Signed-off-by: Antonio Ospite <ospite at studenti.unina.it>
> ---
>  arch/arm/mach-pxa/ezx.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 53 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
> index 9faa6e5..ac58083 100644
> --- a/arch/arm/mach-pxa/ezx.c
> +++ b/arch/arm/mach-pxa/ezx.c
> @@ -19,6 +19,7 @@
>  #include <linux/input.h>
>  #include <linux/gpio.h>
>  #include <linux/gpio_keys.h>
> +#include <linux/leds-lp3944.h>
>
>  #include <media/soc_camera.h>
>
> @@ -1039,6 +1040,57 @@ static struct platform_device a910_camera = {
>        },
>  };
>
> +/* leds-lp3944 */
> +static struct lp3944_platform_data a910_lp3944_leds = {
> +       .leds_size = LP3944_LEDS_MAX,
> +       .leds = {
> +               [0] = {
> +                       .name = "a910:red:",
> +                       .status = LP3944_LED_STATUS_OFF,
> +                       .type = LP3944_LED_TYPE_LED,
> +               },
> +               [1] = {
> +                       .name = "a910:green:",
> +                       .status = LP3944_LED_STATUS_OFF,
> +                       .type = LP3944_LED_TYPE_LED,
> +               },
> +               [2] {
> +                       .name = "a910:blue:",
> +                       .status = LP3944_LED_STATUS_OFF,
> +                       .type = LP3944_LED_TYPE_LED,
> +               },
> +               /* Leds 3 and 4 are used as display power switches */
> +               [3] = {
> +                       .name = "a910::cli_display",
> +                       .status = LP3944_LED_STATUS_OFF,
> +                       .type = LP3944_LED_TYPE_LED_INVERTED
> +               },
> +               [4] = {
> +                       .name = "a910::main_display",
> +                       .status = LP3944_LED_STATUS_ON,
> +                       .type = LP3944_LED_TYPE_LED_INVERTED
> +               },
> +               [5] = { .type = LP3944_LED_TYPE_NONE },
> +               [6] = {
> +                       .name = "a910::torch",
> +                       .status = LP3944_LED_STATUS_OFF,
> +                       .type = LP3944_LED_TYPE_LED,
> +               },
> +               [7] = {
> +                       .name = "a910::flash",
> +                       .status = LP3944_LED_STATUS_OFF,
> +                       .type = LP3944_LED_TYPE_LED_INVERTED,
> +               },
> +       },
> +};
> +
> +static struct i2c_board_info __initdata a910_i2c_board_info[] = {
> +       {
> +               I2C_BOARD_INFO("lp3944", 0x60),
> +               .platform_data = &a910_lp3944_leds,
> +       },
> +};
> +
>  static struct platform_device *a910_devices[] __initdata = {
>        &a910_gpio_keys,
>        &a910_camera,
> @@ -1051,6 +1103,7 @@ static void __init a910_init(void)
>        pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
>
>        pxa_set_i2c_info(NULL);
> +       i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
>
>        set_pxa_fb_info(&ezx_fb_info_2);
>
> --
> 1.6.5.2
>
>