[PATCH 2/6] pxa: frame buffer support both pxa168 and pxa910

[Eric Miao]

On Tue, Nov 3, 2009 at 2:45 PM, Jun Nie <niej0001 at gmail.com> wrote:
> pxa: frame buffer support both pxa168 and pxa910
>
> Signed-off-by: Jun Nie <njun at marvell.com>
> ---
>  drivers/video/pxa168fb.c |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
> index 27bdf2b..2ba1444 100644
> --- a/drivers/video/pxa168fb.c
> +++ b/drivers/video/pxa168fb.c
> @@ -875,12 +875,18 @@ failed:
>        return ret;
>  }
>
> + static const struct platform_device_id mmpfb_id_table[] = {
> +        {"pxa168-fb", 0},
> +        {"pxa910-fb", 1},
> + };
> +

Not sure '0' and '1' means anything here? Otherwise can just be '0'.
Intended usage could be some flags difference between processors,
let's say pxa910-fb supports YUV, one can have something like:

{ "pxa168-fb", FB_SUPPORT_RGB },
{ "pxa910-fb", FB_SUPPORT_RGB | FB_SUPPORT_YUV },

Just examples.

>  static struct platform_driver pxa168fb_driver = {
>        .driver         = {
>                .name   = "pxa168-fb",
>                .owner  = THIS_MODULE,
>        },
>        .probe          = pxa168fb_probe,
> +       .id_table       = mmpfb_id_table,
>  };
>
>  static int __devinit pxa168fb_init(void)
> --
> 1.5.4.3
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>